How can I multiply all values of a 4-element array with all of its inverse values resulting to an array having all 16 products?

I'm quite new to LabVIEW (v.8.0) and I'm trying to figure out the easiest way to have a 4-element array multiplied by its inverse values resulting in a 16-element array
Array 1 values = 1, 2, 3, 4
Array 1 inverse values = 1, 0.5, 0.33, 0.25
Resulting array = (1, 0.5, 0.33, 0.25, 2, 1, 0.66, 0.5, 3, 1.5, 1, 0.75, 4, 2, 1.32, 1)
Any advice would be appreciated. Thanks!
Solved!
Go to Solution.

Attachments:
mo.doc ‏27 KB

Similar Messages

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

My laptop died, how can I plug my ipod classic into a new pc with out losing all my music, over 10,000 songs?!

my laptop died, how can I plug my ipod classic into a new pc with out losing all my music, over 10,000 songs?!
Please help!

Was your iPod previously set up to Manually Manage (where you dragged/dropped the music) or was it set to auto sync (where it started sycning as soon as you plugged it in.)?
If it was set to Manual, you have no worries. Just continue on your way.
If it was set to Auto, you will have to transfer your purchases or redownload them from the iTunes store.
You're either going to have to get the other music back from the websites/CDs you got them from before or find an iPod ripping software program that will do it for you.

Hello! how can i put and read my words documents in the notes pad of my ipod nano 3trd generation?thanks to all.the notes

hello! how can i put and read my words documents in the notes pad of my ipod nano 3trd generation?thanks to all.

The Notes features of the 3G iPod Nano only supports TXT files and not Word Documents. If you want to be able to read these word documents, you'll need to copy the text from each over to a text file. See here for more information.
iPod: Storing and reading notes
Keep in mind that each txt file has a limit of 4096 characters. See this article for more information as well.
Long notes are truncated on your iPod
B-rock

HT201342 i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and fai

i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and failed. Something might i doing wrong

I just had the same problem, I've updated to 10.6.8 yesterday, and since then the browsing are very slow, no matter what broswer I am using, the upload download speed are still the same. But browsing just take forever, It takes for example google.com 30 seconds to load. I have Extream high speed internet connection, 3 other computers, and the only one is having this problem is the Mac after the update.
Something in this update screwed my browsing capabitilties, I tried downloading Crome browser, same issue.
I hope there is a way beside TimeMachine to revert the latest update. I don't want to reformat as I am sure as soon as I am going to do the update it will cause the same problem.
Model Name:    iMac
Model Identifier:    iMac11,3
Processor Name:    Intel Core i7
Processor Speed:    2.93 GHz
Number Of Processors:    1
Total Number Of Cores:    4
L2 Cache (per core):    256 KB
L3 Cache:    8 MB
Memory:    12 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    IM112.0057.B00

How can we create a Collective search help plz tell me with steps

How can we create a Collective search help plz tell me with steps
thanks,
basu

Hi
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points for useful Answers
Regards
Anji

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

Here's something you can try with a copy of your current library.
1 - go to iPhoto's Events preference pane and set the auto split option to 1 day per even.
2 - go the the Events mode, select all Events.
3 - go to the Events menu and and select Autosplit Selected Events.
which will give you an event for each day.
4 - again select all events (although it might be better do to fewer at a time) and export them to your desired destination via the File ➙ Export ➙ File Export menu option with the following settings:
The workflow above will produce a folder for each days photos with the date as the folder's title.

How can I see the windows 8 contacts in outlook 2013 with groups preserved

I an see my windows 8 contacts.
they are all nice and some are broken down into groups.
(I double clicked an old .wab and they imported nicely into windows 8, preserving groups)
now how can I see this same structure as an email lists with groups in outlook 2013? I see the emails, but no groups.
can you help?
thanks

Those groups are not supported in outlook - outlook uses a different format for groups. You'll need to import the individual contacts into Outlook and recreate the groups.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

How can assign a PASS/FAIL test to each element of a cluster?

I would like to pass a cluster from Labview 8.6 to TestStand 4.1.1 and apply a pass/fail test to each boolean element of the cluster. For elements of the cluster that are string values, I would like to apply a string value test. For elements of the cluster that are numeric values, I would like to apply numeric value or limit tests. How can I do this?

Hi epsilon-delta,
The best way to do this would be to create a custom data type from that cluster and store the output of your vi to a local variable. You can then add Pass/Fail Test, Numeric Limit Test and String Value Test steps (using the None adapter) after the Action step to test each element of the cluster.
Eric B.
National Instruments

(HELP!)How can I import Windows Media Player Playlists, into iTunes Playlists, with Music . . for an iPod

How can I import Windows Media Player Playlists, into iTunes Playlists, with Music . . for an iPod
We are having no luck with the thousands of songs we have to manualy add to a particular playlist in iTunes alone. .. there must be a simpler way! How can this be done . . . if there is and it's complicated, is the Genius allowed to help us out with this? They seem to only master Mac's only. . or can they help us? PL E A SE E E HELLPPP!

tt2,
Your very helpful and knowledgeable. I for one appreciate all the hardwork and help you have been giving the people on theses lists, especially with the problems associated with the "importing playlists" from windows media. Unfortunately I need more help if you or someone else can provide it. I followed all the steps you have instructed so far in the threads I have seen. Unfortunately nothing so far works for me. Maybe you or someone can help me, I'd really appreciate it. I tried the notepad++ method and when I click on save I always get a notepad file that my iTunes can't do anything with. I click the "convert to UTF-8 without BOM" then click save as and it still saves as a notepad file. I am also unable to find the \n\ file path to replace with my \C:\ filepath. Here is a copy of the first part of one of my playlists:
<?wpl version="1.0"?>
<smil>
    <head>
        <meta name="Generator" content="Microsoft Windows Media Player -- 12.0.7601.17514"/>
        <meta name="ItemCount" content="161"/>
        <author/>
        <title>Power Surge</title>
    </head>
    <body>
        <seq>
            <media src="..\Various Artists\Mixed Tape 2\13 Out of Control.wma" tid="{650561AF-AA9D-4EA3-84CC-2F09C24DF3B3}"/>
            <media src="..\Various Artists\Mixed Tape 1\12 One Step Closer.wma" tid="{EE5ADD9D-A879-404A-BC60-CE841045BCB6}"/>
            <media src="..\Various Artists\Mixed Tape 1\15 Click Click Boom.wma" tid="{0F71941C-1B67-425F-BDAA-246618709179}"/>
Now I went and switched the part from <media src="..\ to <media src="C:\ in all the files in hopes that was where I am supposed to have my drive letter but it didn't seem to help. Please forgive my encoding ignorance if that's what my problem is. I hope you can help. Thanks in advance.
Madmaxneo

HT5105 How can you do picture in picture when you are working with a Multicam clip?

How can you do picture in picture when you are working with a Multicam clip?

Im doing a drumming music video and with the multi cam clip all the angles are nicely sync'd top the audio.
Problem is if i want to have 3 angles on top of the main shot, im gonna have to re-sync them all to get them to line up manually. If i could use the multi cam clip they will already be aligned
Thanks for trying to help appreciate, hoping someone has some multiclip knowledge and will be able to tell me if yay or nay.

How can I play MPEG-4 files in Premier Elements? It plays in iTunes but I only see video in Element

how can I play MPEG-4 files in Premier Elements? It plays in iTunes but I only see video in Elements

LGSh
Lots of questions, lots of answers needed as mentioned by Hunt. But please include what version of Premiere Elements that you are using when you reply.
How are you importing these file into your Premiere Elements project?
After you drag your file to the Timeline, do you see both an video and audio component (on Video 1/Audio 1) or is there nothing on the Audio 1 track? If you can see a wave form or file on Audio 1, have you checked all the program's volume settings including Edit Menu/Preferences/Audio Hardware and the ASIO settings?
More later.
Please do not hesitate to ask if you need clarification on anything written.
Thank you.
ATR

HT1893 How can I still print using a 'hp designjet 120nr (C7791B)' with OS X 10.8.3?

How can I still print using a 'hp designjet 120nr (C7791B)' with OS X 10.8.3? I cannot get the drivers to work?

bdmorgan wrote:
Thank you once again Matthew. I understand the importance of being thourough and followed your instruction exactly. I really thought that this would solve it and was ready to click 'This solved my question'. However I still have the same print options as before, no 'A1 on the roll'.
Although, when I copied:
'sudo pkgutil --forget org.linuxprinting.foomatic-rip'
into Terminal it did say somehting along the lines of 'nothing found' (sorry I didnt copy the text). Could this be part of the issue?
In this case the instructions were incorrect. I forgot that the uninstaller would run that command. The reason for that command was to let the system know that foomatic-rip 4.0.6 had been removed. I am sure that you were able to then install foomatic-rip version 3.43.2.15. There are two ways to confirm that the older version is now installed. First, if you can print at all, it is present. You could also copy and paste the following command in the Terminal. It should respond with the version that is installed:
pkgutil --pkg-info org.linuxprinting.foomatic-rip | grep version
Do I need to change the PPD at all?
There is no need to change the PPD. PPDs are reflective of the software (drivers) that are called from the PPD. You can put anything you want in the PPD. If that capability is not in the driver, having it in the PPD won't make it work.
Setting a job to print from A1 Roll Paper is a two step process. First you select the Paper Size which is A1.
Then look under the pop up menu below Paper Size for an item called Paper Feed.
Select Paper Feed. Then you will be able to select where/how the paper is being fed to the printer. This is where you can choose Roll Paper (Cut) or Roll Paper (No Cut) among other choices.
Other drivers may have A1 Roll Paper listed under Paper Size. Perhaps that is how the HP driver was. There would still have had to be a place, then to check whether or not you wanted the paper to be cut and/or whether you were feeding sheets of paper from one of the other paths.
Let us know if you can find all the options now and that you are able to keep your normal workflow.

How can I download everything on my Ipod to an account with a new name?

How can I download everything on my Ipod to an account with a new name? (my wife has been putting songs and books on her Ipod using my account, and she now would like to setup an account using her name)

Hello stephencadmaster,
While you cannot transfer purchases to a different Apple ID, you can utilize Family Sharing. I've linked to an article that explains how to share content between Apple IDs using this feature:
Family Sharing - Apple Support
All your family’s purchases, on all your family’s devices.
Once you’ve set up Family Sharing, all the eligible songs, albums, movies, TV shows, books, and apps ever purchased by family members are immediately available to everyone else in the family. And, of course, so are new purchases. The content appears automatically in the Purchased tab in iTunes, iBooks, or the App Store for each family member. Just select the family member whose collection you’d like to browse, then download and play the content you choose. Other family members can access your collection in the same way. If you want to keep some purchases private, you can choose to hide individual items.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How can I make a calender entry that makes a sound when it is its turn?

How can I make a calender entry that makes a sound when it is its turn?

Have you even looked at the calendar app? Did you not notice the "Alert" field in the event details when you create a calendar event?

How can I multiply all values of a 4-element array with all of its inverse values resulting to an array having all 16 products?

Similar Messages

Maybe you are looking for