How can I sign My applet for IE and Netscape without JavaPlugIn?

I think we can sign our applets with Javasigner.exe but this certificate is not being
supported by IE and Netscape. If you want to use this certificate with IE and Nets.
you must install JavaPlugIn to all users. I dont want to choose this way.
I think we have one alternative for this purpose.
For Netscape: Signing Tool
For IE: The program that included SDK-Java
But I could not find SDK-Java any where.
I think Microsoft have gave up to support the Java certification...
I am not sure.
How can I prepare signed applet that can be run on IE and Netscape?
This applet will have some permissions.

The tool you need for signing cab files for the MS JVM is signtool.exe. I beleive that the .NET version of this tool can be used, as the signing process was not Java specific. You do need certificates in a different format than for jarsigner or the netscape signing tool. Verisign will happily sell you two different certificates, but there is probably a way to convert between formats using openssl or similar.
You'll also need to package your files in a cab instead of a jar. cabarc.exe is what we use here. Again, it does not seem to be Java specific, so you can probably still find it despite Microsoft no longer making their Java tools available.

Similar Messages

  • HT4436 how can i setup one account for me and my kids ?

    how can i setup one account for me and my kids ?

    One account each, or one account for all of you to share?
    Either way, follow the instructions here: http://www.apple.com/icloud/setup/
    Remember, if you share an iCloud account, you won't be able to maintain independent Contact lists, calendars, bookmarks etc. They will all be synced to all devices setup using the same account.

  • How can i get best practice for SD and MM

    Please, can any body tell me how can i get best practices for SD and MM for functional approach?
    Thanks
    Utpal

    Hello Utpal,
    I am really surprised, in just 10 minutes you searched that site and found it not useful. <b>Check out my previous reply "you will not find screen shot in this but you can add it in this"</b>
    You will not find readymade document, you need to add this as per your requirement.
    btw, the following link gives you some more link for new SAP guys, this will be helpful. <b>Check out HOW to BASIC transaction</b>
    New to Materials Management / Warehouse Management?
    Hope this helps.
    Regards
    Arif Mansuri

  • How can i sign out of apple id and create a new one without it affecting my other devices

    How can i sign out of apple id and create  new one without it effecting my other devices using my existing apple id

    Content is tied to the account that originally bought/downloaded it - so if you created a new account as opposed to updating the old one, then you will need to continue to use the old account to download updates to its apps or to re-download its past purchases. If you didn't create a new account but instead updated your old one then try logging out of your account on the phone by tapping on the id in Settings > Store and then log back in

  • HT2731 How can I sign up my apple id are free without credit card

    How can I sign up apple id free without credit card thanks.

    Follow the instructions on this page for creating a new account : http://support.apple.com/kb/HT2534 e.g. select a free app in the store and click on 'create Apple id' when 'buying' it

  • How can I enable java applet plug-in and Web Start applications via terminal?

    Since the last Java update to Snow Leopard, I have found that the system periodically disables the Java applet plug-in after a period of disuse.  I know I can go to /Applications/Utilities/Java Preferences and just click to re-enable Java.  But I want to write a script which will do this periodically for a couple hundred Mac users where I work. 
    My question is - how can I reenable the Java applet plug-in and web start applications via Terminal command?  Is this possible?  Is there a plist file that can be modified, etc.?
    Bob Reed

    It is my understanding that Apple's most recent Java update automatically disables Java after a certain period of time that it hasn't been used.  We don't want users to have to keep re-enabling it.  So we wanted to find a way to do this via script either run by a Casper JSS server or stored locally on each workstation.   With the guidance provided by Mark Jalbert above and some text from a script written by Rich Trouton, I was able to make a script (with some minor changes) and a launch agent to re-run the script upon login.  So the preference is always enabled.
    For your reference, the script content is:
    #!/bin/sh
    # DYNAMICALLY SET THE UUID FOR THE BYHOST FILE NAMING
    if [[ `ioreg -rd1 -c IOPlatformExpertDevice | grep -i "UUID" | cut -c27-50` == "00000000-0000-1000-8000-" ]]; then
    MAC_UUID=`ioreg -rd1 -c IOPlatformExpertDevice | grep -i "UUID" | cut -c51-62 | awk {'print tolower()'}`
    elif [[ `ioreg -rd1 -c IOPlatformExpertDevice | grep -i "UUID" | cut -c27-50` != "00000000-0000-1000-8000-" ]]; then
    MAC_UUID=`ioreg -rd1 -c IOPlatformExpertDevice | grep -i "UUID" | cut -c27-62`
    fi
    # Set the the "Enable applet plug-in and Web Start Applications" setting in the Java Preferences for the current user.
    /usr/libexec/PlistBuddy -c "Delete :GeneralByTask:Any:WebComponentsEnabled" /Users/$USER/Library/Preferences/ByHost/com.apple.java.JavaPreferences.${MAC_UU ID}.plist
    /usr/libexec/PlistBuddy -c "Add :GeneralByTask:Any:WebComponentsEnabled bool true" /Users/$USER/Library/Preferences/ByHost/com.apple.java.JavaPreferences.${MAC_UU ID}.plist
    /usr/libexec/PlistBuddy -c "Delete :GeneralByTask:Any:WebComponentsLastUsed" /Users/$USER/Library/Preferences/ByHost/com.apple.java.JavaPreferences.${MAC_UU ID}.plist
    /usr/libexec/PlistBuddy -c "Add :GeneralByTask:Any:WebComponentsLastUsed real $(( $(date "+%s") - 978307200 ))" /Users/$USER/Library/Preferences/ByHost/com.apple.java.JavaPreferences.${MAC_UU ID}.plist
    The launch agent plist content is:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>Disabled</key>
              <false/>
              <key>Label</key>
              <string>org.XXXXX.enableJavaPlugin</string>
              <key>ProgramArguments</key>
              <array>
                        <string>sh</string>
                        <string>/Library/Scripts/XXXXX/enableJava_plugin.sh</string>
              </array>
              <key>RunAtLoad</key>
              <true/>
              <key>StartOnMount</key>
              <true/>
    </dict>
    </plist>
    I hope this is helpful to anyone wishing to keep the Java web plugin enabled.
    Bob
    Message was edited by: Robert Reed2

  • How can I set a name for a unknown place without moving it?

    I imported some photos with GPS information into iPhoto. I can see these photos on the map with one pin per photo, but every pin is tagged with "unknown place". All the photographs were taken on the same island, so I want to add the name of this Island to all pins.
    When I enter the name of the place, iPhoto doesn't know it (it seems like the built-in database is very small), so I have to go to the Google view. There I find the Island and can create a new place, but when I confirm it all photos will move to one pin which was defined in google - the original location is lost (and there is no undo function!!!).
    Questions:
    1. How can I assign a name to a pin without moving the pin?
    2. How can I restore the original place stored in the exif-information of the file?
    Thanks a lot,
    Jürgen

    Thanks for your answer, after playing around another while I understand that using GPS-data or Places are two things which cannot be used together in a reasonable way.
    Either I use the GPS pins, then they are at the right place, but then I just have the pins on the map without any names or grouping information.
    Or I create places - I can create one place per photo, but then I would have to manage around 10.000 places in a simple list view. So if I go on a city trip and take 100 photographs with GPS, then I either have to create 100 places, just to see the name of the city above the pin, or i have to group them to one single pin in the middle of the city. I think both doesn't make sense.
    Let's hope there are some improvements in upcoming versions.
    BTW: To go back to the original GPS-location is very easy. Just remove the assigned place by clicking on the 'x', then the GPS-location is used again immediately.
    Jürgen

  • How can I change default settings for font and size?

    How can I change my default font and size in pages?

    hi Ben,
    I found two files called AdobeDreamweaverSettingsPrefs  (.xml and.tmp)
    I removed them , emptied trash and restarted dreamweaver but the font stacks are sill missing.
    thank you for your suggestion,
    christos

  • How can I design Load Balancing for distant Datacenters? without single point of failure

    Dear Experts,
    We are using the following very old and passive method of redundancy for our cload SaaS but it's time to make it approperiate. Can youplease advise:
    Current issues:
    1. No load balancing. IP selection is based on primary and secondary IP configurations. If Primary fails to respond, IP record for DNS changes to secondary IP with TTL=1min
    2. When primary server fails, it takes around 15 min for clients to access the servers. Way too long!
    The target:
    A. Activate a load balancing mechanism to utilized the stand-by server.
    B. How can the solution be designed to avoid single point of failure? In the previous example, UltraDNS is a single point of failure.
    C. If using GSS is the solution, how can it be designed in both server locations (for active redundancy) using ordinary DNS server?
    D. How can HSRP, GSS, GSLB, and/or VIP be used? What would be the best solution?
    Servers are running ORACLE DB, MS SQL, and tomcat with 2x SAN of 64TB each.

    Hi Codlick,
    the answer is, you cannot (switch to two web dispatchers).
    If you want to use two web dispatchers, they need something in front, like a hardware load balancer. This would actually work, as WD know their sessions and sticky servers for those. But remember you always need a single point for the incoming address (ip).
    Your problem really is about switchover groups. Both WD need to run in different switchover groups and need to switch to the same third software. I'm not sure if your switchover software can handle this (I'm not even sure if anyone can do this...), as this means the third WD needs to be in two switchover groups at the same time.
    Hope this helps,
    Regards,
    Benny

  • How can I change the text for 'Return' and 'Back' links

    Hi everybody,
    How can I change text of standard links 'Return' and 'Back' that appear at the report bottom when user drills down?
    I need to change it in Hebrew interface.
    Thanks in advance,
    Alex

    You have to Customize the viewmessages.xml file. The original file path for English Language is
    oraclebi\web\msgdb\l_en\messages\viewmessages.xml.
    and The entries for back and return are
    <WebMessage name="kmsgEVCLinkBack"><HTML>Back</HTML></WebMessage>
    <WebMessage name="kmsgEVCLinkReturn"><HTML>Return</HTML></WebMessage>
    For more details, about language cusotmization read oracle documentation, page no 197.
    http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31766.pdf
    - Madan

  • How can I download the software for a second time without a backup but with  the serial number?

    Hi guys,
    stupidly my hardware got broken and I've missed to do a backup for the programs. May it's a stupid question but how can I download the Lightroom software for a second time? I've got the serial number for this, but can't find a link without buying it again....
    Thanks a lot for your help!!!!
    Cheers,
    Hannah

    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • How can I install Dutch language for SMS and other...

    Hello there,
    I got a Nokia 6220c bought in the UK, and now need Dutch language for SMS and other common tasks... how can I get it?
    Many thanks,
    Mariano

    You need to take the phone to a nokia care point and ask them to install it for you.
    Language packs are not available for self install.
    http://europe.nokia.com/support/repair-and-recycle/repair/care-points
    Any methods that you may read about elsewhere will void the warranty and cannot be discussed here.

  • How can I use Time Capsule for backups and an external hard drive?

    I have a large file/program on my iMacs hard drive that is 62GB and I would like to keep only things I need on my iMac. I have a 2tb time capsule currently used for backing up. It has roughly 1.66 TB free. How can I move the 62GB program onto my Time Capsule and still use it for backups? Also, is this stable? And don't worry about backing the program up because it came on 8DVD discs.
    Thanks.

    1. Mount the Time Capsule as a drive and drag the application over to it. If the application requires system components, those won't be transferred; if those are only data files, you may be able to drag them over as well and then create a symlink or alias to a folder enclosing their current location.
    2. The application may work slowly if this is done. Note that Time Machine will eventually use up all the free space on the Time Capsule that isn't reserved by being allocated to a disk image.
    (66649)

  • How can we find search criteria for Mask and Namedsearch

    Hi Gurus,
      I got a doubt while working with the concept of mask and namedsearch. I defined a search criteria and stored the result under a mask or namedsearch. After some time if i call the mask/namedsearch where can we see the search criteria. Can anybody make me clear about this.
    Thanks
    Ravi

    Hi Ravi,
    You can see the search criteria for Named Search. Suppose you search for a field in free form search and then include all these records in your Named Search. Now in order to see the search criteria and enhance it. You need to go to>Menu bar>Search>Restore Named Search>Press Named Search(Name Given By you). Now you will able to see in free form search or any other search criteria which you included in for your Named Search.
    Regards,
    Mandeep Saini

  • How can I play app games for iPhone and iPad on my iMac

    Is it possible to play app-games made for iPhone and iPad on my iMac

    The iPhone and iPad run iOS and the Mac runs OS X.
    Apps written for iOS will not run on Mac.
    Only if the developer has written a version for OS X will it run on the Mac and you would have to buy and install that version of the Mac.
    Allan

Maybe you are looking for