How can I specify the attribute AU_SIZE in OUI

Hello,
How can I specify the AU_SIZE when i create the disk group for OCR and Voting disk when i install the GI home.
Basically i want to create the Disk group with AU_SIZE as 4MB when i create it Via OUI.I know I can edit the attributes when i do using ASMCA.But not sure about OUI.
Please can someone guide me ?
Regards
Joe

Hi Joe,
Did you mean that i will need to move the OCR/voting **** to another diskgroup -> drop the one created during installtion -> recrerate the diskgroup with AU_SIZE as desired Yes.. you must move OCR, VOTING and ASM SPFILE to another diskgroup and recreate the diskgroup.
Doc said : Oracle recommends that the allocation unit (AU) size for a disk group be set to 4 megabytes (MB).
I do not see benefits to configure the AU SIZE 4MBytes for diskgroup that will store only Clusterware Files.
The voting files are stored directly on ASM Disk (i.e not use AU SIZE). The OCR File and ASM SPFILE use AU SIZE, but are not frequently accessed (low I/O) and files are too small to configure AU to 4MBytes.
Set AU SIZE makes a difference when you do need high I/O throughput. i.e: Used to Diskgroup that will store Datafiles.
I recommend you read my point of view how to store VOTING Files, OCR and ASM SPFILE on ASM.
Re: 3rd voting disk on nfs share
Regards,
Levi Pereira

Similar Messages

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
currently I am trying to verify how many users Lines are missing , Emp numbers , Phones from AD with HR list available to me.
I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
any’twhenCreatedtAcctEnabled’tGroups
Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
Can you modify this script to help me out :)
Hi,
Depending on what attributes you want.
Import-Module ActiveDirectory
#From a txt file
$USERS = Get-Content C:\Temp\USER-LIST.txt
$USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
#or from a csv file
$USERS = Import-CSV C:\Temp\USER-LIST.csv
$USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
Regards,
Dear
Gautam Ji<abbr class="affil"></abbr>
Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
| Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk

In Jsp TagLib how can I get the Attribute value (like JavaBean) in jsp

Dear Friends,
TagLib how can I get the Attribute value (like JavaBean) in jsp .
I do this thing.
public void setPageContext(PageContext p) {
 pc = p;
pc.setAttribute("id", new String("1") );
 pc.setAttribute("first_name",new String("Siddharth")); //,pc.SESSION_SCOPE);
 pc.setAttribute("last_name", new String("singh"));
but in Jsp
<td>
<%=pageContext.getAttribute("first_name"); %>
cause null is returing.
Pls HELP me
with regards
Siddharth Singh

First, there is no need to pass in the page context to the tag. It already is present. How you get to it depends on what type of tag:
Using [url http://java.sun.com/j2ee/1.4/docs/api/javax/servlet/jsp/tagext/SimpleTagSupport.html]SimpleTagSupport
public class MyTag extends SimpleTagSupport
public void doTag()
 PageContext pc = (PageContext)getJspContext();
 pc.setAttribute("first_name", "Siddharth");
 pc.setAttribute("last_name", "Singh");
 pc.setAttribute("id", "1");
}Using [url http://java.sun.com/j2ee/1.4/docs/api/javax/servlet/jsp/tagext/TagSupport.html]TagSupport or it's subclass [url http://java.sun.com/j2ee/1.4/docs/api/javax/servlet/jsp/tagext/BodyTagSupport.html]BodyTagSupport the page context is aleady declared as an implicit object:
public class MyTag extends TagSupport
public void doStartTag()
 pageContext.setAttribute("first_name", "Siddharth");
 pageContext.setAttribute("last_name", "Singh");
 pageContext.setAttribute("id", "1");
}In each case, this sort of thing should work:
<mytags:MyTag />
<%= pageContext.getAttribute("first_name") %>I

How can I specify the path in Form Builder 9.0

Hi, everyone,
could anybody tell me how can I specify the path in Form Buidler 9.0? there is problems when I want to attach library in form builder. thanks to Kuldeep RAwat and Natalia Vidal, I know I should specify the path, but I still don't know how to specify, how can I do?
besides, when I run a form, sometime there will be a warnig:
Please acknowledge message
what's that meaning?
thank you very much for your great help

Shay Shmeltzer thank you very much for your so quickly response. I have modified the file and my form can run now!
but, when I open my form, it always suggest me:
FRM-10102: Cannot attach PL/SQL library TalbotStandard. This library attachment will be lost if the module is saved.
so everytime I open my form, I must attach the library manully. I don't know the reason. do you know that or anybody else knows that? thank you very much!
have a good weekend :-)

How can I convert the attribut lastLogon ...

Hi,
How can I convert the attribut lastLogon on an Active
Directory Microsoft?
Attributes ar = ctx.getAttributes(dn, attrs);
if (ar != null) {
for (int i=0; i<attrs.length; i++) {
Attribute attr = ar.get(attrs);
if (attr != null) {
String values="";
for ( Enumeration vals=attr.getAll();
vals.hasMoreElements(); ) {
values += vals.nextElement();
if ( vals.hasMoreElements() )
values += "\t";
entry += SRV.SEPARATOR + values;
When I take the value of the restrained attribut of the
enumeration how I make convert it for example in a date ?
I am using Windows2000 Advanced server.
An example of lastLogon attribue is "126949578544450976".
Any help is greatly appreciated.
R.F.

It looks to be the same format at accountExpires.
If so, your in luck, I worked that one out back in January:
http://forum.java.sun.com/thread.jsp?forum=51&thread=346718

How can we specify the number of decimals to be printed

How can we specify the number of decimals to be printed
such as "%5.2d" in C.
Can anyone help me

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

How can we specify the order of the predicates execution?

I am going to write the following query
select answer, answer_id from surveys s join answers a on s.survey_id = a.survey_seq_id
where question_uid = 206400374 and insertdate = to_date('31/12/2012') and answer > 0;However, when I look at the execution plan, I see that the last predicate (to_number(answer) > 0) has been executed the first. Henceforth, it checks many rows first. Normally, 75 rows belong to 31/12/2012 as you see from the following. Can I specify the execution order?
select count(*) from surveys s join answers a on s.survey_id = a.survey_seq_id
where question_uid = 206400374 and insertdate = to_date('31/12/2012');
COUNT(*)
75If so, how? Because, the type of answer is varchar2 and some of answers contain text characters such as 'Yes' or 'No'. Therefore, before 31/12/2012 some answers contain 'Yes' or 'No'. However in 31/12/2012 all answers are numeric.
Plan hash value: 3217836037
| Id | Operation          | Name    | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT   |         |     2 |    68 | 9401   (1)| 00:01:53 |
|* 1 | HASH JOIN         |         |     2 |    68 | 9401   (1)| 00:01:53 |
|* 2 |   TABLE ACCESS FULL| SURVEYS |     2 |    26 |   239   (1)| 00:00:03 |
|* 3 |   TABLE ACCESS FULL| ANSWERS |   337 | 7077 | 9162   (1)| 00:01:50 |
Predicate Information (identified by operation id):
   1 - access("S"."SURVEY_ID"="A"."SURVEY_SEQ_ID")
   2 - filter("S"."INSERTDATE"=TO_DATE(' 2012-12-31 00:00:00',
              'syyyy-mm-dd hh24:mi:ss'))
   3 - filter("A"."QUESTION_UID"=206400374 AND
              TO_NUMBER("A"."ANSWER")>0)
select distinct answer from surveys s join answers a on s.survey_id = a.survey_seq_id
where question_uid = 206400374 and insertdate = to_date('31/12/2012');
ANSWER
1
3
0
2And, also I can execute the following query without any error
select to_number(answer) from surveys s join answers a on s.survey_id = a.survey_seq_id
where question_uid = 206400374 and insertdate = to_date('31/12/2012');

In answer to your original question:
970992 wrote:
However, when I look at the execution plan, I see that the last predicate (to_number(answer) > 0) has been executed the first. Henceforth, it checks many rows first. Normally, 75 rows belong to 31/12/2012 as you see from the following. Can I specify the execution order?According to the execution plan, it will do a full scan of surveys using the predicate on insertdate to build the (presumably in-memory) hash table (hash based on survey_id) to do the joins (Step 2). Then, it does a full scan of the answers table using the question_uid and answer predicates (Step 3). For each row it finds that matches those predicate, it will prpobe the hash table created in step 2 using the hashed value of survey_seq_id. So, it is doing the insertdate predicate first.
In answer to your last post
970992 wrote:
>
First of all i would get rid of the implizit type conversion:
TO_NUMBER("A"."ANSWER")>0)it is not implicit conversion, I reckon it is explicit type conversion, isnt it?
No, it is an implicit type conversion. Your code says answer > 0, since the answer column is a varchar2 column, Oracle implicitly converts the answer column to a number to compare against the number on the right side of the comparison. Note that if something like 'A' ever becomes a valid answer, then this query will fail with ORA-01722: invalid number.
>
>
Obviously "A"."ANSWER" is not a number colmun, problably varchar, so use something like
A.ANSWER != "0"
or
A.ANSWER > "0"Yes answer column is varchar2 but can you type A.ANSWER > "0" as a predicate? I mean, you can not varchar > varchar, can you?
Of course you can use inequality predicates on a varcahr column. Is the string A greater than the string B?
Based on the explain plan, your statistics might be a little off, not hugely so. The esitmates are at least in the right order of magnitude based on what you have posted so far.
What indexes, if any, are available on the two tables?
John

How can I get the Attribute Value in the existing XML Elements-Reg.

Dear All, I have the InDesign Document with xml Based, now I want to get the XML Elements name and XML Attributes for each Elements, using SDK Concepts. Example: <chapter> chapter1 </chapter> id = "ch001" <sec> Section ....</sec> id ="se001" <para> para ....</para> id="pa001" How can I get the XMLElements & XML Attributes in the InDesign-XML Structure. Please any one can suggest me.... Thanks & Regards T.R.Harihara SudhaN

Dear Dirk
Many Thanks for the Suggestions, Now I search and study the XML concepts. Meanwhile, I need your suggestions for further Development in SDK -XML concepts.
I am using the SnippetRunner -SDK file, their given some XML based programmes. [Create XML Elements, Elements + Attributes, XML Comments] and etc...
Hope U will help me to Develop the SDK- XML Concepts.
Thanks & Regards
T.R.Harihara SuduhaN

How can I get the attribute of another app of the JSP server's session

in one server, use Tomcat 4.1, have two application at
.../webapps/app1
.../webapps/app2
when use login to application1, it'll set a attribute of session use following code:
session.setAttribute("identitycode", IdentityCode);
session.setMaxInactiveInterval(SessionTimeOut);
and the other jsp programs which at app1 directory will try to get the attribute of this session to identity whether the user had login and get the identity code.
I want to make user just login one time to use application1 and application2, but I didn't know how to get the attribute of session what seted at app1 in app2's programs.
can you tell me how I can do this?

If there are 2 different applications like app1 & app2, U need to use:
application.setAttribute() method.(not session.getAttribute).
u need to maintain one collection like hash table which will store the mappings of User & their IDs . U can then get the user details from app1 to app2

How can I specify the PARTITION name at the time of data load?

Hi,
I have a table with 4 partitions. By using SQL*Loader I'm going to load data into the same. While inserting the records it should go to the 2nd partition only.
Where should i specify the Partition name?
Please clarify me with sample code.
Thanks.

Assuming that the partition is empty before the load, I would load the data into a temp table with the same structure as the partitioned table. After all the data is successfully loaded, exchange the partition of the table with the temp table using 'alter table ... exchange partition...'
Another question is, how is your table partitioned?
Message was edited by:
Jens Petersen

How can I get the attributes for this tag?

THis is the tag:
<InvoiceQueryRs requestID="1" statusCode="0" statusSeverity="Info" statusMessage="Status OK">
But when I do a nodeType() is returns a "1" which is Element. Shouldn't it return Attribute type?
org.w3c.dom.Document xDoc = xml.parseXML(false);
Element el = xDoc.getDocumentElement(); //Using DOM API
NodeList nl = el.getElementsByTagName("InvoiceQueryRs");
NodeList nl = el.getChildNodes();
for(int c = 0; c < nl.getLength(); c++) {
System.out.println(nl.item(c).getAttributes());
This code returns a "com.ibm.xml.dom.NamedNodeMapImpl@88f03c" for the attributes. I also tried a NamedNodeMap with similar results. Please help if you can!
THanks
Bill

Nevermind, I got it. Thanks.

How can I search the attribute including type and length of the field in the SD table or form such as sales executive table through debug?

Some users show that the sales docment external name is not printed completely in the form of delivery form printing, so I want to find how much length of the field is there through debugging. I am very expected to gain some suggestion from you.

for exploding the bom if you know header material use
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      DATUV                 = SY-DATUM
      MEHRS                 = 'X'
      MTNRV                 = P_MATNR
      WERKS                 = P_WERKS
    TABLES
      STB                   = I_BOM
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      CONVERSION_ERROR      = 8
      OTHERS                = 9.
now check PLPO & PLKO table for routing or AFVC and AFVV for routing.
if production order created you have to check in afvc and afvv else check in plpo and plko.
for checking with plpo and plko you have to check MAPL table.
for bom and material link
MAST,STPO,STKO.
stlnr is the common field
regards
shiba dutta

How can I specify the attribute AU_SIZE in OUI

Similar Messages

Maybe you are looking for