How can I stop coalescing of mouse move/drag events in jdk1.6 ?

Hello all,
My application uses a [pen-based tablet|http://en.wikipedia.org/wiki/Graphics_tablet] to draw lines/curves. But the problem is: when I run my application, due to java’s default behavior of discarding the mouse events which occurs during the repaint call, the curves results in the set of joined straight lines.
To overcome this problem, when searched over net, came across below link:
[http://forums.sun.com/thread.jspa?messageID=10811388]
I tried the option provided at the above URL i.e. overriding the below method of Component.java file:
protected AWTEvent coalesceEvents(AWTEvent existingEvent,AWTEvent newEvent);
But later found that, overriding this method worked fine for me for jdk1.5 but this solution did not work in case of jdk1.6. When reviewed the source of Component.java and EventQueue.java files in jdk1.6, found that this method is not having any implementation and simply returns “null” and the complete handling of coalescing of events occurs within EventQueue.java file’s local method which is mentioned below:
private boolean coalesceEvent(AWTEvent e, int priority);
As this method is part of EventQueue.java and also it is a private method, I am not finding any way to stop the coalescing of mouse move/drag events in jdk1.6.
The main problem is that my application is purely based on jdk1.6 only.
Can anybody help me out to solve this problem by providing any option of preventing the coalescing of mouse move/drag events in case of jdk1.6.
Thank you.

Look at the link I posted, you aren't double buffering correctly.
I saw the other post you mistakenly made before you edited it. Not really a big deal, I was just wondering why you did that.

Similar Messages

  • How can I stop the iWeb welcome movie from appearing

    How can I stop the iWeb welcome movie from appearing every time iWeb starts up?
    Oh yes and now that we are talking: when I plug in my ipod, I want iTunes to start, not iPhoto.
    Who knows these tricks?

    iPhoto seems to be viewing the iPod as a camera.  Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
    OT

  • How can I stop or delete a movie purchase download that is stalled?

    How an I stop a movie purchase download from iTunes that is stalled?  I apparently do not have enough storage capacity...but it keeps trying to download.

    Slide your finger across the videos' listing in your iPhone Videos App and tap the red "Delete" button that appears.

  • How can I stop and delete a movie from downloading

    I recently purchased the movie takers , and it's taking up all my space . I just want to get rid of it

    Take a look at this link, http://www.krunk4ever.com/blog/2009/05/20/how-to-cancel-a-download-in-itunes/

  • HT1657 How can I stop or cancel rental movies downloading from iTunes ?

    Someone Please Help me!!
    I rented 2 movies and it cost $12 dollars. But now I have change my mind and don't wanted to rent anymore. I also want my money back So could someone help me!!!! Please .!!

    Mmmm, once you decide to rent, it's rented.
    You can voice your concerns here:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • How can I stop my bluetooth mouse from waking up my X230 while it's in my bag (overheating...)?

    Even though I have set the mouse setting to not wake up the computer it still does so. 
    This is very annoying since the computer wakes up while it's in my bag and starts overheating.
    One solution would be to remove the bluetooth USB dongle every time but isn't there a way to turn this off?
    Here is the setting I changed. Not sure if that one applies to the bluetooth mouse but I could not find another one.

    'evening.
    Do you have a Bluetooth Radios section in Device Manager? If so, what do you see on the Power Management tab of the ThinkPad Bluetooth item (or any other item)?
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • How can I stop the cursor from being dragged outside the bounds of an intensity graph in LV 7.1?

    Currently, an intensity graph cursor can be dragged outside the graph bounds, and the cursor position continues to change as if the graph had no bounds.

    You can maintain the cursor (and the graph scales...) between defined boundaries programmatically, using an attribute node. Not a very elegant solution, since there is some quivering. See the example.vi.
    Of course, if the user need to modify the scales (zoom in/out...), there will be some additional work ! :-)
    Hope this help.
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Bound_cursor.vi ‏51 KB

  • How can i scroll with a mouse? dragging works, but no scrolling. mouse used is a microsoft bleutooth notebook mouse 5000

    acer iconia a500
    android honeycomb

    Hey Folks,
    I had this same problem. Played with all the setting mentioned here in the about:config page to no avail. Then, on a lark I decided to change my setting in the mouse driver from 2 lines per click to three lines per click, which happens to match what about:config is claiming it will do....
    Now it works.
    FYI my mouse is a Lenovo USB optical wheel mouse on a Thinkpad with ultranav and trackpoint enabled so... in short way too many ways of moving the pointer going on.

  • How can I STOP ical from deleting all my events after a month or so

    No matter how I set the preferences/settings it always keeps deleting all events after 30 to 40 days.
    I have gone into preferences and checked off the
    "DELETE EVENTS AFTER...
    and put 99 or 999 days and it doens make a difference
    If Ileave the box unchecked - it STILL doesn't make difference
    Anyone has a suggestion?
    as I keep loosing all the important info/phone numbers I enter.
    Thanks
    Bruno

    Bruno,
    Welcome to Apple Discussions.
    Are you using any sync software?
    The easiest thing to try is to refresh the the com.apple.iCal.plist file. You will find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Quit iCal, drag the com.apple.iCal.plist file to your Desktop, log out/in or restart, and make sure the deletion preference is not checked.
    ;~)

  • TS3048 When I move my mouse the screen also moves.  How can I stop this?

    When I move the mouse the whole screen moves.  How can I stop this?

    I NEED HELP!
    I am using Mac OS X 10.5.8
    Screen moves around with moving the mouse, I have checked here that turning off Zoom from the Universal Access and Keyboard & Mouse panes of System Preferences would sort out the problem BUT my 'System Preferences' does not work, when I try to open it: nothing comes up. Please someone may advise if there is any keyboard commands to sort the screen moving issue.
    (I know I need an upgrade, but there is massive data, family pics, movies to be backed-up before the upgrade, and I don't really know how to)
    Thanks

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • Hi, how can I stop my screen from freezing up.Its acts like a scratch card, I use the mouse cursor to rub away to find the password box?

    HI,how can I stop my screen from freezing, It acts like a scratch card,I run over it with the mouse to scratch away at the grey screen to find the password box
    underneath?

    OS X: Login window partially appears, cursor movement redraws screen

  • While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips?

    While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips? Also when I use my blade it only leaves a dotted line in the clip. How can I make that a solid line? I do a lot of flickering in my videos and don't need that some what of a snapping effect while I edit. Please help me someone. I believe i upgraded from FCP 10.0.1 to 10.0.3 and before it never did this.

    Mark an In point and an Out point (which creates a Range) and hit the forward delete key (Replace with Gap.) On a MacBook, you'll probably need to hold down the Fn key and type the Delete key (or, I think you might be able to use Shift-Delete as the same command). On an iMac/Mac Pro keyboard, it's the key just to the left of 'end' or the next key above the left arrow key.
    You can use the Range tool (hold down the R key and click drag over your clip) or the Blade tool to cut at the in and out (then select the cut and replace with gap).
    You can also go into Commands > Customize (command-option-K) and assign a different key to Replace with Gap.
    If you need to ripple edit the ends (cut), create a small section that is Gap, and hold down the T key while you use the mouse to click drag both ends (double sided trim cursor) of the cut.
    Don't worry about the dotted line blade... That just lets you know that the frames on either side of the cut are continuous, or sequential — nothing has been moved yet. Once frames from either side of the mark have been cut, it becomes a full fledged cut resembling a separate clip.

  • I have created a movie in 16:9 format. I have created an iDVD pane in 16:9 but when I preview the movie that pane changes to 4:3 and burns the DVD as a 4:3 movie. How can I stop that, please I am in Snow Leopard, using FCE4.0.1?

    I am using Snow Leopard and have created a movie in 16:9 format (SD not HDV) I created a movie which stays in the 16:9 format in fcp file, .mov fiule and MP4 file. I created an iDVD pane in 16:9 but when I play the movie in the iDVD preview window the iDVD pane switches to 4:3 and it burns the DVD in 4:3. How can I stop this so I get a16:9 DVD. Thanks for any help offered
    James Bowman

    Hi
    As I see this I see two parts
    • Howto go from FinalCut to iDVD
    • Howto set iDVD right
    In FinalCut Express (to 4) or Pro (to 6 - most probably 7 too)
    • One has to set Anamorphic in the Browser window - menu columns
    • Export as QuickTime movie .mov - NO QUICKTIME CONVERSION
    In iDVD there are TWO places to set - WideScreen
    - Start a NEW iDVD project - AND HERE SELECT WideScreen 16:9
    - in Project - select Projectinfo
    - now set WideScreen 16:9 - Here too
    This use to work for me.
    FOR FinalCut Pro-X - I have not a Clue - as I don't use it. SORRY
    BTW - There is a good practice to before BURNING the DVD do
    • Save as a DiskImage
    • Test this by using DVD-Player tool
    And if it is OK Size and All - then burn it by using
    • Disk Util tool
    • here set down burn speed to x4 or less (less burn errors = plays on more devices and better)
    • Not using Memorex or NoName etc cheap media - as they usually DO NOT WORK as Video-DVDs
    • I use Verbatim DVD-R as they play on more and even older DVD-players
    Yours Bengt W

  • How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

    How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

    FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
    But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
    Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

Maybe you are looking for

  • PDF to Excel, why can not do?

    "Failed to Export to Microsoft Excel. There was an unexpected problem." So, other programs like Able2Extract PDF converted 8 and CogniView PDF2XL can make the conversion. Why AdobeExportPDF can not?

  • DMA 2100, can't get to settings menu

    Having trouble getting a DMA 2100 setup. After it boots, I get to the welcome screen and I can usually get one or two remote presses before it freezes up. So typically I can press the down arrow to get to the settings menu, and then I press OK to ent

  • Where's the Applet Launcher in 10.4 ?

    i installed 10.4 today, wiped the disk clean first i notice there's no applet launcher but there is Java Web Start, as far as i can tell it's the replacement for Applet Launcher ? well i cant get it lo launch anything sea monkey downloads the applet

  • Connecting speakers to Airport with "Triple Stereo Line-In"

    Hi there... I have been looking through the forums and so far havn't found anything to help me, so I thought I would try and post a subject myself... I have been happily living with two speakers connected to Airport foor wireless connection through i

  • Creating new BAT file script to stop, restart and disable S I agent

    We have just installed BOXI3 and are in the process of updating some bat files for stopping, restarting and failover (to our backup servers)and disable services on the Central Configuration Manager.   In my old scripts we called each service  Example