How can I stop the blinking cursor?

Hey
I have been using an older version of TLF and used blinking = false when I did nor want the cursor to blink.
Now I cannot find another way to achieve this.
It seems like if you use the SelectionManager you are stuck with this default blink.
Or am I wrong?
Regards
Micheal

The blinkRate was moved from the SelectionManager to the SelectionFormat. That way you could have separate blink rates for focused and unfocused selections.
http://livedocs.adobe.com/flex/gumbo/langref/flashx/textLayout/edit/SelectionFormat.html
Assign new SelectionFormats to the SelectionManager focusedSelectionFormat, inactiveSelectionFormat and/or unfocusedSelectionFormat properties.
http://livedocs.adobe.com/flex/gumbo/langref/flashx/textLayout/edit/ISelectionManager.html
Richard

Similar Messages

How can I stop the sharing on the iPhones that are in the same account because its sharing every thing even text messages

How can I stop the sharing on the iPhones that are on my account because its sharing everything even text messages and its driving everybody crazy

An icloud account is designed to be used by one user to keep his/her devices in sync.
If you have muitiple family members or friends using the same account as yours, then have them get their own Apple IDs and icloud accounts.
If you mean you want to stop the sharing between all your devices, then on any one device, go to Settings>icloud and turn off the services you don't want that device to share/sync. Or turn off icloud altogether if that's what you want.

How can I stop the flickering/juddering that appears on my iPhone 5's screen?

How can I stop the continuous flickering/juddering that appears, usually after I switch Wi-Fi on, on the screen of my iPhone 5? It has only started occurring since I updated to iOS 7.0.3. Thanks.

It's happening continuously now!

How can i use the same cursor in a loop fro multipletimes.

I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling under one state.But when it comes to the second state,as the second cursor is already open it is unable to fetch the records.Please help me .How can i use the same cursor in a loop fro multipletimes.
I am sending the code which i have written in When-Button-Pressed-Trigger...
declare
     sid number;
     pid number;
cursor csid is select distinct(site_id) from cyber_ppt;
cursor cpid is select pc_id,st_dt,ed_dt from cyber_ppt where site_id = sid;
     stdt varchar2(10);
     eddt varchar2(10);
     nom number;
     stmonth varchar2(10);
     edmonth varchar2(10);
     cjan number:=0;
     cfeb number:=0;
     cmar number:=0;
     capr number:=0;
     cmay number:=0;
     cjun number:=0;
     cjul number:=0;
     caug number:=0;
     csep number:=0;
     coct number:=0;
     cnov number:=0;
     cdec number:=0;
     i number:=1;
begin
     open csid ;
     loop
     fetch csid into sid;
          exit when csid %notfound;
          message(sid);
     open cpid;
     loop
     fetch cpid into pid,stdt,eddt ;
     exit when cpid %notfound;
     message(sid||'-'||pid);
     stmonth:=substr(stdt,4,3);
     edmonth:=substr(eddt,4,3);
     nom:= months_between(eddt,stdt);
while i <= round(nom)
     loop
     stmonth:=substr(stdt,4,3);
if stmonth='JAN' then
          cjan:=cjan+1;
elsif stmonth='FEB' then
          cfeb:=cfeb+1;
elsif stmonth='MAR' then
          cmar:=cmar+1;
elsif stmonth='APR' then
          capr:=capr+1;
elsif stmonth='MAY' then
          cmay:=cmay+1;
elsif stmonth='JUN' then
          cjun:=cjun+1;
elsif stmonth ='JUL' then
          cjul:=cjul+1;
elsif stmonth ='AUG' then
          caug:=caug+1;
elsif stmonth ='SEP' then
          csep:=csep+1;
elsif stmonth ='OCT' then
          coct:=coct+1;
elsif stmonth ='NOV' then
          cnov:=cnov+1;
elsif stmonth ='DEC' then
          cdec:=cdec+1;
end if;
     stdt:=add_months(stdt,1);
     i:=i+1;
     end loop;
     end loop;
     end loop;
     end;


try this /* untested */
DECLARE
sid           NUMBER;
pid           NUMBER;
CURSOR csid IS SELECT DISTINCT(site_id) FROM cyber_ppt;
CURSOR cpid(nSid NUMBER) is SELECT pc_id,st_dt,ed_dt FROM cyber_ppt WHERE site_id = nSid;
stdt        VARCHAR2(10);
eddt        VARCHAR2(10);
nom         NUMBER;
stmonth     VARCHAR2(10);
edmonth     VARCHAR2(10);
cjan         NUMBER:=0;
cfeb         NUMBER:=0;
cmar         NUMBER:=0;
capr         NUMBER:=0;
cmay         NUMBER:=0;
cjun         NUMBER:=0;
cjul         NUMBER:=0;
caug         NUMBER:=0;
csep         NUMBER:=0;
coct         NUMBER:=0;
cnov         NUMBER:=0;
cdec         NUMBER:=0;
i            NUMBER:=1;
BEGIN
FOR rec IN csid
LOOP
                  sid := rec.csid;
FOR cRec IN cpid(sid)
LOOP
                 pid := cRec.pc_id;
                 stdt := cRec.st_dt;
                 eddt := cRec.ed_dt;
stmonth:= SUBSTR(stdt,4,3);
edmonth:= SUBSTR(eddt,4,3);
nom:= months_between(eddt,stdt);
WHILE i <= round(nom)
LOOP
          stmonth := SUBSTR(stdt,4,3);
IF stmonth='JAN'
THEN
         cjan:=cjan+1;
ELSIF stmonth='FEB' THEN
         cfeb:=cfeb+1;
ELSIF stmonth='MAR' THEN
          cmar:=cmar+1;
ELSIF stmonth='APR' THEN
          capr:=capr+1;
ELSIF stmonth='MAY' THEN
          cmay:=cmay+1;
ELSIF stmonth='JUN' THEN
          cjun:=cjun+1;
ELSIF stmonth ='JUL' THEN
          cjul:=cjul+1;
ELSIF stmonth ='AUG' THEN
          caug:=caug+1;
ELSIF stmonth ='SEP' THEN
          csep:=csep+1;
ELSIF stmonth ='OCT' THEN
          coct:=coct+1;
ELSIF stmonth ='NOV' THEN
          cnov:=cnov+1;
ELSIF stmonth ='DEC' THEN
          cdec:=cdec+1;
END IF;
         stdt:=add_months(stdt,1);
         i:=i+1;
END LOOP;
END LOOP;
END LOOP;
END;

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

How can i stop the itunes update notification

how can i stop the itunes software update notification. I have alreaady unchecked the box to automatically check for updates.

Don't tap the install button.

How can i stop the i tune pop force quit doesn't work

hi ,
please help " how can i stop the i tune pop force quit doesn't work"

Refunds on downloaded software are virtually nonexistent.
I have had cases where I purchase software on a physical disk. If I don't like the software I can uninstall it from my computer and sell it legally. Recouping most of my loss.

How can I stop the oracle XSLT processor from inserting extra whitespace in HTML?

How can I stop the oracle XSLT processor from inserting extra whitespace in HTML?

Use <xsl:output mode="html" indent="no"/> as a top-level element child of your <xsl:stylesheet> element.

How can I stop (the annoying) McAffee Antivirus from downloading every time Adobe Flash needs to upate (which lately is every second day)

How can I stop (the annoying) McAffee Antivirus from downloading every time Adobe Flash needs to upate (which lately is every second day)

don't auto update. manually update and untick mcaffee.

How can I stop the iWeb welcome movie from appearing

How can I stop the iWeb welcome movie from appearing every time iWeb starts up?
Oh yes and now that we are talking: when I plug in my ipod, I want iTunes to start, not iPhoto.
Who knows these tricks?

iPhoto seems to be viewing the iPod as a camera. Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
OT

How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

Hi AppleLove78,
I'm sorry to hear you are having issues with your new iPhone 6. If you continue to have audio or call quality issues, you may find the information and troubleshooting steps outlined in the following article helpful:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
Regards,
- Brenden

I am making an iMovie (HD 6.0.3) using old photos. How can I stop the zoom in on some of the clips?

How can I stop the zoom in on some clips of old photos? I am using iMovie HD 6.0.3 I don't want to take it off of every picture.

Select the photo in your timeline you wish to change, then with Meda/Photo tab open, click the Show Photo Settings button.
In the new window that opens, uncheck Ken Burns Effect.
Matt

In OUT Bound of a Jaxws provider, how can we stop the provider invoking its endpoint and send a response back?

Hi One & All
While we are working on Delegate(provider) for JAXWS client handler in Weblogic10 , we have some technical issues and need some assistance.
Problem Description
In OUTBound of a provider, how can we stop the provider invoking its endpoint and send a response back?
Example:
I have a provider with some handlers configured for both IN and OUT flows. When the Jaxws provider is making a request, the OUTBound Handler gets invoked and in this Handler I would like to stop invoking actual endpoint and send back my own response. That means I should be able to tell the Handler chain to stop further processing of this flow, set a response message into message exchange and invoke the IN flow. How do I do that?
This kind of mediation/interception is possible in standard specifications like JAX-WS, Servlets etc… wondering if Weblogic10 JAXWS provides any sort of this kind.
Also we would like to know who is invoking a provider endpo int in JAXWS stack in weblogic10? Is it an OUTBound handler at the end of handler chain or some other transport component after the handler chain?
Thanks in Advance
Suresh
Edited by: user12494412 on Jan 22, 2010 7:06 AM

I completely agree with this....I have used Windows and Skype for many years. I recently installed an older version of Skype to run on Windows 8.1 because the new version is SO AWFUL. As much as I prefer the older version (6.14), the daily number of SPAM CONTACT requests is rediculous and most are just variations of the same spammer. Maybe it is time to look for a replacement for both?

With the new version of numbers, 3.0, how can I stop the spread sheet from scrolling horizontally without reducing the size?

With the new version of numbers, 3.0, how can I stop the document from moving horizontally? When I scroll up or down I find it annoying that the document might shift to the left, and then I have to scroll it back to the right. The only way I've found to stop it from moving horizontally is by reducing the document down to about 50%, but then I can't read the document. I prefer having the document set at 125%, but then the bottom horizontal scroll bar shows up, and then the document can shift to the left if I'm not exact with my scrolling up or down.

Hi Nels,
Please update your profile. Numbers 3.0 will not run on Mountain Lion (10.8.x)
With the new version of numbers, 3.0
imac, Mac OS X (10.6.3)
iMac, OS X Mountain Lion (10.8.4)
Regards ,
Ian.

How can I stop the intro voice when I play a genius mix

HOw can I stop the intro voice when I play a genius mix?

Hi Diavonex. Yes I was aware of this option.
Subsequently I have done a litle research and downloaded a music app called "Track 8" which has a much clearer interface (larger type) and the abillity to change the background colour to dark or light.
This is much more readable in the car in bright light, and much better at night too.
You can also turn off auto-lock within the application, which is great, as it doesn't affect other apps.
Although this app is really only an interface sitting on top of the music app, it offers a much better experience
in my opinion that the stock player which seems to have devolved rather than evolved.

How can I stop the blinking cursor?

Similar Messages

Maybe you are looking for