How can i stop the started process of downloading ios 8 on my ipad air?plz tell me i dont want to upgrade.

i have apple ipad air 32gb ,ios 7.0.3 , by mistake i have started the process of update on ios 8 , how can i stop this ? plz tell me.

The replies don't address the question: "I started getting bombarded with requests to upgrade to Firefox 5.0. This goes on all day, all night...it never stops. Is there a place I can ask you guys to please stop?"
I have the same problem: I also don't want to upgrade to 5.0 (4.0 messed me up enough and I finally got that straightened out). How do I stop those annoying requests? It should have a "No" option.
Please email replies to [email protected] Thanks.

Similar Messages

How can we stop the Collapse process in process chain.

hi
guys
How can we stop the Collapse process in process chain.if any one know's plz tell me
your regards
suresh

Hi,
All the above post duly suggest a the methods we usually follow to cancel a collapse request i.e sm37 ---> Cancel without core,but these solution only applies if we are running collapse as a seperate variant in the process chain, in case its running as a part of change run the all above process will lead to the locking of the target.
In that case if you could "lock the target" even before the collapse ran will result in the "Stopping of the collapse on the target automatically" .
As far as figuring out the exat job of the collapse, you can directly get the job details in the "display message' , context menu option of the "Collapse variant" in the chain, clicking on the batch monitor and then clicking on the job to get its detail,then going to the specific "Application server " via SM51 and cacelling the job.
Do check wearther the target is unlocked or not in sm12 if not then choose the object in se03 and select "Unlock".
Hope it will serve yoour purpose
Thax & Regards
Vaibhave Sharma

How can I stop the install process?

How can I stop the install process? It tells me my disk is damaged and to restart and repair, but when I restart it tries to install again....it's a never ending cycle. I'd rather keep the system I have than continue this mess.

Hello Serau1s,
It sounds like you are installing Mavericks, and are being prompted to restart and repair your hard drive, but when the computer restarts it goes back to the installation process. The following article should help you get that disk repaired by getting you to the recovery partition, named:
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
Thank you for using Apple Support Communities.
All the very best,
Sterling

How can I stop the extracting process ?

How can I stop an extracting process it's taking hours and I can't wait much longer, the pause and cross symbols won't work. I think I tried to save it to the wrong place.

See if using the system task management is able to shut it down.
PC - Task Manager: (CTRL-ALT-Delete) http://support.microsoft.com/kb/323527
Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/
You can also try shutting down the machine.

HT1222 how can i stop the update processing of ios7 on my ipad. I changed my mind and want to stop it

I need help stopping the apple software that I just started on my ipad...ios7. I changed my mind and want to stop it... HELP

Hi,
As I stated before you do not get iTunes 11 on your ipad. Are you getting a message on your works computer to update iTunes on the computer from version 11 to 11.1? If you select not to update iTunes, can you still sync your ipad to iTunes 11?
Jim

HT204390 voice over is spelling the same word i played on a scrabble game when i put only finger on a word on the app. I deleted the scrabble free game. How can I stop the word ""****" repeatedly being spelled on over my iPad and iPhone

Taco Pasta Salad Recipe from Metabolic Cookbook:http://tiny.cc/Metabolic Ingredients: 1 package (16 ounces) spiral pasta
1 pound ground beef
3/4 cup water
1 envelope taco seasoning
2 cups (8 ounces) shredded cheddar cheese
1 large green pepper, chopped
1 medium onion, chopped
1 medium tomato, chopped
2 cans (2-1/4 ounces each) sliced ripe olives, drained
1 bottle (16 ounces) Catalina or 16 ounces Western salad dressing
Directions:
Cook pasta according to package directions. Meanwhile, in a skillet, cook beef over medium heat until no longer pink; drain. Add water and taco seasoning; simmer, uncovered for 15 minutes.
Rinse pasta in cold water and drain; place in a large bowl. Add beef mixture, cheese, green pepper, onion, tomato and olives; mix well. Add the dressing and toss to coat.
Cover and refrigerate for at least 1 hour.

Just to close out ... the 'supervisor' was clueless as it turns out. Apple does NOT have a deal with UPS on handling the Mini, so the person who gave me the info was wrong. Did he call back? No ... he just let me go out and find out myself.
So I called again, and this time eventually ended up with a manager, who told me that the UPS Store thing wouldn't work, but that a box would arrive and then there would be a 'forced replacement'.
About 10 minutes later he called back and said he discovered that EVERYTHING the supervisor did was wrong ... he didn't actually properly flag for auto-replace, so I would have gone through an identical cycle again! So he had to restart the whole process, meaning I would get TWO 'coffins', but that I would then get an auto-replacement and would see that indicated in my support email.
I got the email, saw 'auto-replace'. Got the box on the 28th and immediately turned it around. Apple got the box on the 31st, and on the 1st I got emails that my Mini would arrive on the 2nd and it also had the new serial #.
Yesterday I grab the box from FedEx and go home to check it out. As expected, it IMMEDIATELY worked on my WiFi without issue ... and has worked perfectly since.
So ...
- it was NOT my home network.
- it WAS a hardware issue with the Mini
- Apple does NOT do proper testing on the Mini to detect what appears to be a fairly common issue.
- non-retail customers ARE treated as second-class by support.
This issue took FOUR WEEKS to resolve, involved FOUR shipments back & forth, and the ONLY reason it got resolved was that *I* did the troubleshooting that Apple either would not or could not do.
For someone who has been an Apple customer for more than 30 years, this has been a sobering experience ... I quite frankly expected much better from them.

How can I stop the mail app from downloading old messages and marking them as new.... repetedly

I have just bought myself my first ever mac, and i've been having a little trouble with the mail function that comes with it. The first time i connected my mail app to my hotmail adress, all my old mails started coming in and they were all marked as unread. i had like 7000 og them, so it took a while for them all to load. after this i marked them all as read, and it was fine for a couple of days.
I am not sure what makes all my e-mails load as "new" again and again, but it happens every so often. This is very annoying because i get a little notification at the top of my screen for every "new" e-mail.
In the beginning i didn't think that much of it, but now it is really starting to annoy me, bacause it has happened so many times, so my question is:
Have any of you experienced this? And how did you fix it?
And i am running the OS X version 10.8.2, if that is relevant

Is it an IMAP or POP account?
For POP accounts, you can select remove from server under the advanced tab of the account.
Apple support article with information on receiving a message more than once:
Mail Problems

When I start Firefox 4 two tabs open one is my homepage and the other is "google toolbar updated", how can i stop the second tab opening?

I have google toolbar installed on my Firefox 4, whenever I start firefox two tabs open, one is my homepage gmail and the other is "google toolbar updated".
How can I stop the second tab from opening?

See these articles for some suggestions:
* [[Firefox has just updated tab shows each time you start Firefox]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Every time I start Firefox, the upgrade/signup page is displayed in one tabe while google, my start;up page s displayed in another. How can I stop the firefox page from loading every time?

Every time I start Firefox, the upgrade/signup page is displayed in one tab while google, my start-up page is displayed in another. How can I stop the firefox page from loading every time?

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

How can I stop the...(icons?)..and .firefox ball from bouncing all around the Start Page?? It's VERY ANNOYING. frustrated dino

How can I stop the little pictures (icons??) and the firefox ball from bouncing all around the middle of the start page, which is my home page (?) It's VERY ANNOYING and DISTRACTING!

If you prefer not to see snippets on the about:home page then you can set the browser.aboutHomeSnippets.updateUrl pref to an empty string on the about:config page.
Delete the storage\moz-safe-about+home folder in the Firefox profile folder with Firefox closed to remove snippets stored in IndexedDB and make Firefox use a default set.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
You can reset the browser.aboutHomeSnippets.updateUrl pref to the default value to re-enable the snippets.

How can I stop the program from going through all of the text previously put in. It is making the process very slow.

How can I stop the program from going through all of the text previously put in. It is making the process very slow.

while True:
and just indent everything else under it
Ends when you press ^C.
if you wish to have a way to break out of the loop, say, when you press enter at the VPC number without entering anything, add the following after your vpc input:
if not vpc:
break
which will break out of the while loop and end your program.
Last edited by buttons (2007-12-14 22:03:06)

PSE remains active in background after exit. How can I stop the program completely?

PSE remains active in background after exit. How can I stop the program completely?
Is there any command line option to force PSE to stop completely after exiting the GUI?
Opening the Windows Task Manager and killing the PSE process is not a solution!
(Context: I want to start PhotoshopElementsEditor.exe from another program with an image filename as command line argument. This other program waits in background until PhotoshopElementsEditor.exe has finished and pops up again after that. Since PhotoshopElementsEditor.exe continues to run silently in background, the other program will never come back.)

Hi - having the same problem with PSE process not ending on exit. Have you had any luck in resolving the issue?
Any advice would be appreciated. TIA

How can I stop the flickering/juddering that appears on my iPhone 5's screen?

How can I stop the continuous flickering/juddering that appears, usually after I switch Wi-Fi on, on the screen of my iPhone 5? It has only started occurring since I updated to iOS 7.0.3. Thanks.

It's happening continuously now!

How can I stop the iWeb welcome movie from appearing

How can I stop the iWeb welcome movie from appearing every time iWeb starts up?
Oh yes and now that we are talking: when I plug in my ipod, I want iTunes to start, not iPhoto.
Who knows these tricks?

iPhoto seems to be viewing the iPod as a camera. Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
OT

In OUT Bound of a Jaxws provider, how can we stop the provider invoking its endpoint and send a response back?

Hi One & All
While we are working on Delegate(provider) for JAXWS client handler in Weblogic10 , we have some technical issues and need some assistance.
Problem Description
In OUTBound of a provider, how can we stop the provider invoking its endpoint and send a response back?
Example:
I have a provider with some handlers configured for both IN and OUT flows. When the Jaxws provider is making a request, the OUTBound Handler gets invoked and in this Handler I would like to stop invoking actual endpoint and send back my own response. That means I should be able to tell the Handler chain to stop further processing of this flow, set a response message into message exchange and invoke the IN flow. How do I do that?
This kind of mediation/interception is possible in standard specifications like JAX-WS, Servlets etc… wondering if Weblogic10 JAXWS provides any sort of this kind.
Also we would like to know who is invoking a provider endpo int in JAXWS stack in weblogic10? Is it an OUTBound handler at the end of handler chain or some other transport component after the handler chain?
Thanks in Advance
Suresh
Edited by: user12494412 on Jan 22, 2010 7:06 AM

I completely agree with this....I have used Windows and Skype for many years. I recently installed an older version of Skype to run on Windows 8.1 because the new version is SO AWFUL. As much as I prefer the older version (6.14), the daily number of SPAM CONTACT requests is rediculous and most are just variations of the same spammer. Maybe it is time to look for a replacement for both?

How can i stop the started process of downloading ios 8 on my ipad air?plz tell me i dont want to upgrade.

Similar Messages

Maybe you are looking for