How can I support big database in redHat linux?

I know in berkeley db, a database is like a table. But if I want to put must data into the table, the database file would bypass 2 gigabytes, which is not supported by the linux os. Is there a method to this?

Yes, OS does not support bigger file then 2G.
Why not berkeley DB use many different files to save
a single database automatically? If so, when a first
file's size if bypass the support of the OS, berkeley
DB will aotomatically create another big file.
ShuanghuaHi Shuanghua,
This feature request has not come up since most file systems can support files that exceed 2 GB. Since Linux has had this support for years, I suggest you look into turning that option on or going with a Kernel version/File system that supports files that exceed 2GB.
If you can come up with a good reason for this feature that would be useful to others than we will consider it for a future release. With the information you provided thus far, it seems like you should simply change your file system/Kernel so you can get around the restriction.
Ron Cohen

Similar Messages

  • How can we position 5 Database Server for a centralized Database ?

    1) We are providing a e governance solution for an organization,where we are providing a  centralized database,Client have provided 5 Database server for the same.how can we position the Database Server? there are 5000 Concurrent users and 25000 users,SAN
    Storage for approx. 60 TB,Database size of 2 TB and growth of 1 TB every year
    2) How many instance can we have for above said Case?
    3) How much RAM Required ?

    Thanks for sharing information!!
    DB size is going to be too huge, you need to check for data archival option along with proper compression option.
    As per requirement, you need good server setup like; CPU: 4 cpu, 12 cores and RAM will be good to start with 256 GB.
    When you say 5 db server, is that it means 5 physical server not db instances rt?
    If that is the case then you can go for SQL Server 2014 to use that in memory options along with so many good support for temppdb, query optimization due to cardinality changes, SSD support etc.
    Intances will be:
    INS1, 2 : main instance and archival instance, using first two servers out of 5 servers.
    INS3: DR server, if it will not be active all the time and then we can easily check for 1/4 load on DR server so you can configure AlwaysOn to check INS1 and DR instance to get all HA DR part too.
    In case of INS4, INS5 can be used for reporting purpose being configured as other replication to act as local DR too.
    Hopefully I have covered all the available objects you have.
    Santosh Singh

  • I build databases with appleworks over 10 years on my ibook, and continue to add to them. Now I have a macbook pro. How can I translate the databases to a compatible program?

    Over 10 years I have built several databases with Appleworks. Now I have a macbook pro. How can I translate these databases to a 10.6.8 program?

    Thanks Joe, but that won't work. I've finally found a site that answers the question: http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
    I can only say that by Apple I have been royally screwed. I'll never buy another mac -- everything I do would simply disappear into cyberspace.

  • How can I use two database in Dataset in SSRS?

    Hi,
    I am using one query to generate my SSRS report. In that query I am using subquery. Now I am pulling data from multiple tales.
    DB used in sub query is different than the rest of the tables DB.(So total I am using 2 DB(Database))
    So I see that in SSRS, I can connect query(In DataSet Properties) to one DATA_SOURCE only, how can I use other database which is I used in sub-query?
    I have to move this SSRS into PROD and I can't hard code that sub-query's DB name in my query.
    Please give me suggestion. Thanks!!
    Vicky

    In SSRS 2008 R2 you can use the Lookup function (http://technet.microsoft.com/en-us/library/ee210531.aspx ) and LookupSet function (http://technet.microsoft.com/en-us/library/ee240819.aspx
    Depending on your security set up, you can reference a table in a second database on the same server using a three part name:  database.schema.table.  This is more likely to work for you if you wrap your SQL command in a stored procedure.
    Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

  • How can I convert a Database Handle from TestStand to LabVIEW?

    I want to use a Database Handle (already created in TestStand by an Open Database step) in a LabVIEW-VI (called from TestStand) to connect it with the "Connection Reference" input of the "Easy SQL.vi"? If I use a directly connection via the "TestStand - Get Property Value (Number).vi" I get back the error message 4101 in LabVIEW. How can I convert the Database Handle?
    Test Engineering
    digades GmbH
    www.digades.com

    The TestStand database step types use the CVI SQL Toolkit to talk to databases. The handle that you are referencing is an internal memory location and not a actual handle that you can directly use. Currently as implemented the handle that is stored in a numeric TestStand property for the connection and the SQL statement are the handle values returned from the CVI SQL Toolkit. So for the connection handle, you could call the CVI SQL Toolkit function
    DBGetConnectionAttribute (
    int Connection_Handle,
    tDBConnectionAttr Attribute,
    void *Value);
    and get the CVI CAObjHandle reference. With this you could then call the CVI ActiveX function
    CA_GetInterfaceFromObjHandle(
    CAObjHandle Object_Handle,
    const IID *Interface_Id,
    int Force_AddRef,
    void *Inte
    rface_Ptr,
    int *Did_AddRef);
    to get the actual ActiveX interface reference. This would have to be converted into a LabVIEW reference.
    You may want to consider just using LabVIEW to open a new parallel reference only using the toolkit.
    Scott Richardson
    National Instruments

  • How can i recover my database after losing system data file.

    hi everyone,
    how can i recover my database in the following scenario.
    1. offline complete backup taken 2 days ago. database was in archive mode.
    2. today i lost my system data file, and also lost my all archived files.
    3. i started up the database but, the following error was generated.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 135338868 bytes
    Fixed Size 453492 bytes
    Variable Size 109051904 bytes
    Database Buffers 25165824 bytes
    Redo Buffers 667648 bytes
    Database mounted.
    ORA-01113: file 1 needs media recovery
    ORA-01110: data file 1: 'D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF'
    4. i copied the system data file from backup and wrote the following statement, to recover the database.
    SQL> recover datafile 1;
    ORA-00279: change 2234434 generated at 07/15/2009 10:52:10 needed for thread 1
    ORA-00289: suggestion : C:\B\ARC00051.001
    ORA-00280: change 2234434 for thread 1 is in sequence #51
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    now i don't have any archive file. is there any chance to recover the database ?
    R e g a r d s,
    Asif Iqbal
    Software Engineer,
    Lucky Tex, Karachi,
    Pakistan.

    now i don't have any archive file. is there any chance to recover the database ?If no archive log files are available you can't recover the datafile.You need to have all the archives from the time of offline backup was taken till the system datafile is lost.
    Anand

  • How can i start oracle databases? i am using Oracle 8.1.6 for linux.

    when i run dbstart,it gives me following message:
    Database "ora4cweb" warm started.
    but when i use sqlplus,it says:
    ORA-01034: ORACLE not available
    i made a mistake ,i shutdown my linux before i shutdown oracle databases,how can i start oracle databases now?thanks in advance.

    try it without the scripts...
    login to linux as oracle
    start server manager
    svrmgrl
    connect internal
    startup
    select sysdate from dual;if that works
    exitcheck listener
    lsnrctl
    statif nothing running type
    start
    exitnull

  • How can i use Unix database in java?

    How can i use Unix database in Java?
    Message was edited by:
    JPro

    I have not a clue about FoxPro, but the db then is FoxPro and not Unix. The better question would be "How do I connect to FoxPro DB running on Unix with JDBC?".
    My answer to that would be, search the Internet for a JDBC driver.

  • How can I combine two databases, from two computers, to have one combined database of messages?

    My old XP computer recently died and I had to build a new Windows 8.1 machine. While I was down I used a laptop as a temporary replacement. Now my new machine is running fine and receiving e-mail, but I now have two databases--one on the new machine and one on the laptop. Both are based on a recent backup, so they are lengthy--except that the new machine's database has a hole in it for the period I was on the laptop and the laptop's database also has gaps. How can I combine two databases into one that includes the messages from both machines?
    Thanks in advance,
    profsimonie

    Thanks for your reply. My profile folder did not contain any MBOX files. I found them in another folder on another drive. The Import-Export tools simply transferred each folder to the current one as a sub-folder. Then I had to use ctrl-a to select everything in the folder and move them manually to the current folder (such as inbox). Then I could use the other utility you mentioned to remove the duplicates. This had to be done, one folder at a time, to combine each folder. It worked, but I had about thirty-five folders to deal with. The whole process took most of two days to complete. I wish there was a simple way to blend everything together in one action, but I could not find an add-on that would do this.
    Frank Simonie

  • How can I get Connection(Database Connection)on my backing bean

    hello guys!
    How can I get the Database Connection on my managed bean?
    I want to use this connection for my reports.
    thanks a lot!
    alvin

    Alvin,
    You can access the data provider through ADF the binding. The data provider represents the business service you use. Once you have a handle to this you can get the connection.
    You don't mention the business service, so I cannot help you more than this. If it is ADF BC, have a look at http://download.oracle.com/docs/html/B25947_01/toc.htm and the stored procedure section. Steve Muench explains a trick to access the "real" JDBC connect used by ADF BC
    Frank

  • How can I create a database connection to Cloudscape database in 9iJDeveloper?

    How can I create a database connection to Cloudscape database in
    9iJDeveloper?
    thanks.

    Hi,
    I assume you have a JDBC driver for Cloudscape.
    1. In the IDE System Navigator, expand the Connections Node.
    2. Right-click on the Database Connection and choose New
    Connection .. .
    3. Click pass the welcome screen.
    4. In Step 1, name your connection and choose "3rd party JDBC
    Driver"
    5. Follow the rest of the steps and provide username/password,
    class name and URL, test and you should be ready to go.
    Good luck.

  • Flex Mobile project - How can I open a database csv?

    How can I open a database with csv flash builder and load the contents into a list?

    STARTUP OPEN;
    Check this link
    http://h50.isi.u-psud.fr/docmiage/oracle/doc/server.817/a82950/ch5.htm

  • Hello i would like to stop using outlook (office 2011) and use instead "mail": how can i transfer the database?

    hello i would like to stop using outlook (office 2011) and use instead "mail": how can i transfer the database?

    Hello Sylviefrombuenosaires, here is a link from macworld that can solve your question. Try reading this.
    http://www.macworld.com/article/158112/2011/02/export_outlook_ical.html
    Carlos

  • How Can I create a database?

    How can I create a database to store registered members info
    (member id, password and other information?) I have the scripts for
    member login, member signup, etc.. I understand that I will have to
    deploy the database, once it is created, in the same folder where I
    have all other scripts (PHP.)
    Thank you, in advance.

    Hey,
    basically you should start with an empty SharePoint 2010 project where you add an List-EventReceiver. This Receiver should point to the url of the list and handle the ItemAdded-Event. In this method you place the code to create the database, for example
    with a SQL-Statement.

  • How can i migrate oracle database  data to DB2 database

    Hi
    how can i migrate oracle database data to db2 database.
    can anyone provide me solution.

    BTW why do you want to migrate oracle database data to db2 database? Any specific project requirement like Parallel run with Oracle database (e.g data replication)? Or any other issues - Cost? Manageability? Availability? Business requirements?
    Do you need to do a day-to-day data transfer or it is for permanent migration?

Maybe you are looking for