How can I switch out graphics in different areas of a movie?

I have a project that I'm working on for a flooring company. They want a Flash movie that allows the user to change the look (product and color) of different areas of the floor.
I have a menu on the left side that designates the three different areas of the floor. I have the two products along with color swatches along the top. I currently have each of the three areas as separate movies that load into a main movie.
These three area movies each contain the color swatches on the top as buttons to change the color of that area using "On Release > Go To Frame Label" actions that displays each of the different colors. These movies each load on a different level based on the selection of the left side menu.
I want the user to be able to go to each of the three areas and change the product/color attributes without losing what they had already done. For instance, if they choose PRODUCT A in RED for AREA 1, then they want to change the product/color on AREA 2, I still want the movie to display PRODUCT A in RED for AREA 1, etc.
The problem I run into is that when you go back and forth between the three areas, the navigation only controls what movie is on the top level and doesn't allow the user to go back to a previous area and change the product/color attribute.
Keep in mind I'm a designer, not a developer. My knowledge of Actionscript is very superficial so don't throw a bunch of "geek speak" at me ;-)

It is not clear how you have the design arranged timeline-wise, but what you should do is get away from using the timeline as much as using movieclips. Have each area as a different movieclip that you control with the selection buttons. That way, changing one movieclip's current frame will not disturb another's.

Similar Messages

How can i find out all the different meanings of User ID Paramtrs (USR05)?

Dear Gurus
How can i find out all the different meanings of User ID Parameters (table USR05)?
Thanks
Nuno Natividade

hi,
   the values are stored in the table tpara and they are used to put the landscape of the system,and to know the log of the system.
FORM DETERMINE_LANDSCAPE .
    SELECT SINGLE * FROM USR05
                    WHERE BNAME = SY-UNAME
                        AND PARID = 'ZLANDSCAPE'.
    IF SY-SUBRC = 0.
      IF NOT USR05-PARVA IS INITIAL.
   REPLACE
      ELSE.
        PERFORM DETERMINE_FROM_CENTRAL_SYSTEM.
      ENDIF.
    ELSE.
      PERFORM DETERMINE_FROM_CENTRAL_SYSTEM.
    ENDIF.
ENDFORM.                    " determine_landscape
FORM DETERMINE_LOG_PARAMETER.
    SELECT SINGLE * FROM USR05 WHERE BNAME = SY-UNAME
                        AND PARID = 'ZLOG_USER'
                        AND PARVA = 'X'.
    IF SY-SUBRC = 0.
      WITH_LOG = 'X'.
    ENDIF.
<REMOVED BY MODERATOR>
venkat.
Edited by: Alvaro Tejada Galindo on Mar 4, 2008 12:47 PM

How can you found out what computers you are home sharing so you can delete some, How can you found out what computers you are home sharing so you can delete some

How can you find out what computers you are sharing with so you can delete some

Oh, have you brought up so many good points. Not to take us off-topic, but I could rant all day about Eloqua consulting firms who let low-level employees (Eloqua skill-wise) loose on clients projects. Just not fair for either the employee or client. There was one company that did this to me a few years ago, and since then dozens of people have asked me about them for a reference. Needless to say, they never get a good one from me, and have likely lost hundreds of thousands of dollars in projects because of this. Not worth it in the long-run to cut corners.
Back to the topic at hand....
You really hit the nail on the head in so many ways. It really all does come down to one thing: hard work. There are no shortcuts. Always keep learning. Embrace every Eloqua challenge you can, and never say never. Never be fearful of being wrong by asking something 'silly', or 'looking stupid'. I remember several times that I've submitted Eloqua support tickets, or tickets to other related vendors about things that I was convinced were bugs/major issues. Turned out to be my mistake. But that's ok. You brush off, stand back up, and learn from them.
And finally, be modest. You will never know everything about Eloqua. Be willing to learn from others, and know that there actually may be a better way to do something than you may have spent days or weeks working on.

HT1689 How can I find out what 5 devices are connected to my itunes account

How can I find out what 5 devices are connected to my iTunes account?

There is no list available from your end.
(78933)

How can I find out what apple IDs are tied to an email address

We are trying to set up FaceTime and got the verification error on the email address. We went in to the Apple ID account and when we verify the email address, it tells us that it's tied to another AppleID. My daughter has 3 other AppleIDs and we've checked each one of them and the email address is not tied to any of them.
How can we find out what apple ID is tied to this email address?
We have used the "Forgot my Apple ID" function and used all 3 of the different email addresses she's used on the accounts and when we access the one that says there's a duplicate, it takes us to the account and it's the one with the email address that I noted above.
Any thougts or help?
Thanks!

Itunes limit includes computers.
http://www.ilounge.com/index.php/articles/comments/managing-devices-in-your-itun es-store-account/

My hard drive is full, i'm being told i have 284.03 GB of other. How can I find out what these files are so i can delete them?

My Mac is telling me that my hard drive is almost full, i have used 7.65 GB for Audio. 16.58 GB for Movies, 9.89 GB for photos, 788.6 MB for Apps and 284.03 GB for Other. how can i find out what "other" is so I can delete it? I hope someone can help me.

If OS X is reporting you need to remove some items you obviously have a more severe issue.
To fix your issue is likely too complicated and lengthy to go into all of it here as it sounds like a OS X issue, it will require the services of person very familiar and experienced with Mac's to first recover your data and then restore OS X back to a functional state which may or may not require new hardware/software installed.
If your under warranty or AppleCare, take it in for service.
You can also hire the services of a local Mac computer support technician experienced in these matters.
Have them look at your Wifi, RAM amount, extra storage and computer backup proceedures in the process.
Good Luck.

How can i find out which apple ids are associated with my ipad

When I sync my iPad I get the message that some songs cannot be updated because only 5 Apple IDs can be associated with an iPad. I am aware of three that we use in my family - mine and my two sons. How can I find out what other Apple IDs are associated with my iPad?

Itunes limit includes computers.
http://www.ilounge.com/index.php/articles/comments/managing-devices-in-your-itun es-store-account/

How can I find out specifically what plugins are missing? Am told missing, then plugin finder tells me no suitable found, I would look for them myself but have no way to find out what exactly need to look for.

I go into a wiki created by my employer, and get the bar at top of page almost immediately telling me there are plugins needed. I click the button offered for finding plugins, and almost immediately am told no suitable plugins are found. Plugin help offered is useless, because I have no idea what plugins I need to look for. How can I find out what plugins are being detected as "missing"?

If there is no LR edits to keep, or if you don't want to keep the existing edits, you could delete the files from LR and import them again.
Since the file names on disk and file names in LR don't match, you will need to manually match them up by hand individually, if you want to keep the existing LR edits.
The easiest approach to this -- without doing any script programming -- is to go into each directory, one at a time:
Select the correct folder in the "folders" pane. Right-click "show parent" as necessary to see the directory tree.
Sort the LR Library by creation date.
Using the details view in File Explorer, sort the files by creation date (add to the viewed columns if necessary).
Assuming no more than 1 image per second, the files should line up.

How can I find out which vi's are dynamic?

I am working on a project made up of hundreds of VIs. I have to make an standalone executable version of it. I was not the original developer. Is there a way I can scan the vi's to find out which of them are dynamic? What should I be looking for as a telltale sign of being dynamic (What makes a vi dynamic?)
Are all vit's dynamic? (I was told by my senior developer to include all vit's in the dynamic section of the build dialog box.)
Message Edited by rashid19672008 on 02-27-2008 03:25 PM

This is not a property of a VI, but rather a way of using it. You can call any VI either way (or both ways), so whether a VI is called dynamically depends on your code.
One way of finding whether a VI does not have static calls is to open all the VIs in the hierarchy at the same time and then go over each of them in a loop, open a reference to it and check its "Callers" property. If the array is empty, it means that this VI is not called by any other VI currently in memory and might be called dynamically. It might also mean that it is an old VI and is not used any more.
Another option is to create a copy of the hierarchy using File>>Save With Options. LabVIEW will only copy the VIs which are called statically and you can then compare the hierarchies for files which are only found in the original.
Try to take over the world!

How can I find out where certain prompts are used in a BI application?

I have 2 questions...
How do I identify all the dashboards where a specific object from my catalog is used in a BI application?
Similiarly, how can I determine all the reports and prompts that use a specific field from my subject area?
Thanks,
Darcy

Open catalog manager and create a report. That report can include column formula(field), table, catalog name and etc and will create a report that you can download to an excel dump giving all the reports and report paths that use those selected attributes.
Open catalog manager--> go to tools--> create report and select all you need
Hope it helps
thanks
prash

How can I find out which table/tables are behind a view?

I tried following with scott/tiger:
SQL> select text from all_views where view_name = 'TAB';
TEXT
select o.name,
decode(o.type#, 2, 'TABLE', 3, 'CLUSTER',
4,
The text after "4," is not displayed in SQL*Plus-Editor. The attribut TEXT with datatype long is not displayed fully on the screen. How can I correct it? Thank You!

"set long 8000" before you run the query I tried it. Thank You for this correct and fast answer!

HT204088 Charges have come up on my bank statement, i have no computer just an ipad, how can i find out what these charges are for?

I dont know how to find out where the charges have come from?
Any thoughts?

The only way that I know of for viewing your purchase history is on a computer's iTunes (via the Store > View Account menu option), though you should be able to see (and manage) if you have any auto-renewing subscriptions : http://support.apple.com/kb/HT4098
For things such as apps, music etc you should have received email receipts from the store.

How can I find out which portal users are logged in portal?

Hi
I need to know where can i find information about which portal
users are currently logged in to portal. Are there any api or
built-in functions which will help me find out this information?
Thank you for your immediate help!!

I too would like to find out which users are loggeg on. We need
to restrict users to one login or session if possible.
Thanks,
Tom Henricksen

Datasheet pasting - how can I figure out where the errors are?

For example, I am trying to paste a fairly large chunk of data into the Datashet view to use in a list. (about 30 columns by 9000 rows, so 270,000 cells.) When I try to page, it tells me that about 800 could not be pasted, but does not tell me WHICH
cells, or even which COLUMNS. I am sure that if I could just figure out which cells were not being pasted, I could easily figure out WHY there is an error. Can anybody give me any useful tips to help me pinpoint which columns/cells are having
the problem? Thanks!

Hi,
According to your post, my understanding is that to paste 270,000 cells data into the Datashet view to use in a list.
Please make sure the view have sufficient columns, otherwise the paste operation will fail.
A paste operation will also fail in the following situations:
Some or all of the destination cells are read-only
Pasting the contents into the selected cells will make them fail the validation rules
Attempting to paste data that does not match the data type of the destination cells
Attempting to paste data into a calculated column
More information:
Bulk copy and paste into a SharePoint List:
http://clintoncherry.wordpress.com/2008/02/27/bulk-copy-and-paste-into-a-sharepoint-list/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I lost my pictures on my phone when I did the back up procedure wrong with my computer. How can I find out if the pictures are on ICloud or on my sims card?

How do I find pictures that are no longer on my phone? I am not sure if they are in ICloud or on my sims card.

If your phone is off, there is no way to locate it other than physically looking for it. It cannot be remotely turned on. Even if it were on, you would have had to have Find My Phone setup/activated/turned on BEFORE you lost your phone to have any hope of finding it.

How can I switch out graphics in different areas of a movie?

Similar Messages

Maybe you are looking for