How can I use two screens to display one window

Before Mavericks, MAC OS allowed you to use two screens (next to each other) in order to display one (big) window of one application.
That would mean that a window would start on your left screen en would continue on the right screen.
With Mavericks, however, this not possible any more. The window of the application can only be seen on ONE of the screens (i.e. the left one).
Can any one tell me whether I've missed certain options or how to adjust my settings in order to get this feature back?

Hey CGNL,
First, if you haven't already, set up the displays as an extended desktop:
Choose Apple menu > System Preferences, click Displays, then click Arrangement.
Follow the onscreen instructions.
Then, use Mission Control preferences to uncheck/turn off the option for "Displays have separate Spaces":
Choose Apple menu > System Preferences, click Mission Control
Uncheck "Displays have separate Spaces"
That should enable you to stretch whatever window you want across multiple displays.
via: OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
and
OS X Mavericks: Mission Control preferences
http://support.apple.com/kb/PH13925
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Similar Messages

How can I use two differant iphones on one itunes

I can i use two differant iphones on one itunes, and keep the content seperate?

You can sync as many iphones/ipod/ipads as you like to one computer.
Each is different and is recognized as such

How can I use two single-dimensional arrays-one for the titles and array

I want to Use two single-dimensional arrays-one for the titles and one for the ID
Could everyone help me how can i write the code for it?
Flower
public class Video
public static void main(String[] args) throws Exception
int[][] ID =
{ {145,147,148},
{146,149, 150} };
String[][] Titles=
{ {"Barney","True Grit","The night before Christmas"},
{"Lalla", "Jacke Chan", "Metal"} };
int x, y;
int r, c;
System.out.println("List before Sort");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);
System.out.println("\nAfter Sort:");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);

This is one of the most bizarre questions I have seen here:
public class Video
public static void main(String[] args) throws Exception
int[] ID = {145,147,148, 146,149, 150};
String[] Titles= {"Barney","True Grit","The night before Christmas", "Lalla", "Jacke Chan", "Metal"};
System.out.println("List before Sort");
for(int i = 0; i < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles);
System.out.println("\nAfter Sort:");
for(int i = 0; c < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles[i]);
Generally you don't use prefix (++c) operators in you for loop. Use postfix (c++).
Prefix means that it will increment the variable before the loop body is executed. Postfix will cause it to increment after.

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can I use two accounts ?

How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

How can I open two screens of Adobe digital editions at the same time?

How can I open two screens of Adobe digital editions at the same time?

I doubt that you can. Doesn't the Sound prefpane require you to select just one output device?

How can I use two monitors to increase workspace?

how can I use two monitors to increase workspace?

Drag the tabs of any After Effects windows you want to the second monitor.

How can I use AppleScript Studio to display an image

How can I use AppleScript Studio to display an image in a dialog?

Add an image well to your window in Interface Builder.
You can also add an image file to the Resources group of your Xcode project and then set the image to be displayed inside the image well directly in Interface Builder. No AppleScript code is needed if the image is contained within your app bundle and can be set ahead of time like this.
If the image is contained in your app's bundle but you need to set or change the image at run time then you can use a line of AppleScript to load it into the image well using just it's filename:
set image of image view "yourImageView" of window "yourWindow" to load image "YourImageFile.jpg"
If you need to load an image from an arbitrary location outside your app's bundle then use a path to the image file...
set image of image view "yourImageView" of window "yourWindow" to load image "/path/to/YourImageFile.jpg"
Steve

How can we use two BOM

Dear all,
my scenario is in this way way-
how can we use two BOM for same material.first BOM for inhouse production. Second one for Subcontracting.(means i have to create Purchase order for partial qty.

Dear
1.Goto MM02-MRP4 view -Maintain two Production Version based on two BOM ( Alternative1 with Routing will be PV1 will be used for production in house where as Alt2 with routing having PP03 as control key for external operation -PV2 )
2.Assign the relavant production Version-PV2 in Subcontracting Info Record in ME11
Now, based on the production version assigned in Info Record system suggests the BOM while BOM explosion in Subcon Purchase Order
REFER : Subcontracting & BOM alternative
Hope this will solve your issue
Regards
JH
Edited by: Jiaul Haque on Sep 29, 2010 1:27 PM

How can I have two itunes accounts on one computer?

How can I have two itunes accounts on one computer?

Not sure what you mean.
An account is a user name and password.
Sign into whichever account you want to use for purchasing.
Authorize the computer for both account to listen to the content.

How can I combine two itunes accounts into one?

How can I combine two itunes accounts into one?

Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased. Apple provides no way to change this.
However, if you wish to put content from two accounts into a single iTunes library, you can easily do so. Use the command File > Add File (or Folder) to Library.

Why sometimes we have to use two message( ) to display one message ?

Sometimes one message( ) function is not working properly ? We have to use two message( ) to display one message ? Why ?

And just to add a little on what dave said:
You can also detect which button the user has clicked and do some action accordingly.
DECLARE
al_id ALERT;
al_result NUMBER;
BEGIN
al_id := Find_Alert('MESSAGE');
SET_ALERT_PROPERTY(al_id, ALERT_MESSAGE_TEXT, 'your message here');
al_result := Show_Alert(al_id);
IF al_result = ALERT_BUTTON1 THEN
... --do some action.
END IF;
END;

How can i sync two different ipods to one computer

How can i sync two different ipods to one computer

How to use multiple iPods, iPads, or iPhones with one computer

Can i use two apple tvs with one itunes account?

can i use two apple tvs with one itunes account?

yes and you can use more then 2
just don't give them the same name

How can I use different iTunes accounts on one iPad?

How can I use different iTunes accounts on one iPad?

You can't, well not easily anyway. The iPad is not meant as a multi account device.
You can Sign Out of your iTunes account in Settings->iTunes and App Stores->Apple ID->Sign Out
However if you sign in with another ID and then download past purchases with it you will lock out the previous ID for 90 days. Which means it will not be able to be used on the iPad for 90 days.

How can I use two screens to display one window

Similar Messages

Maybe you are looking for