How can local user send message to other user via OSX server in mac maverick

I just install OS X server in mac mavericks and enable services such as message, DNS, VPN, etc. I also create local users and local network users. I add some local users from OSX server to Message app in order to message to server, but I cannot send any message to those user, even Bonjour is available but I cannot use it to send message in local network.
I already followed all Server Help in Messages like in this image:
I try to access to my local OS X server via IP address by using other PC, Mac and iPhone and I can get this interface:
I already try in iPhone to send message to local user in OS X server after accessing to OS X server via IP Address, but I don't know how local user can get that message and I see nothing in message_archives of message data of server. Therefore, how each user in OSX server can message to each other across OSX server ? Does Admin have to write some codes or make configuration for providing message services to those users ?
Message was edited by: chhanmalin

Client users need to use XMPP client app to log in to server with account name like in server , then user can send message to other users in server. Client users can use iphone, pc, or mac.

Similar Messages

  • I just updated my MacBook pro early 2011 model to OSX 10.9 and was forced to create a new user(administrator) and ended up with a different configuration. If I login with my original user name everything is back. How can I get rid of the other user name?

    I have two user names with Administrator privelages and my MacBook keeps booting up to the wrong one and I have the wrong configuration since I updated to OSX 10.9. I would like to get back to my original User name which I used to boot up to. When I go to the User Groups and Preferences it doesn't allow me to delete the un-wanted user.
    Does anybody have any suggestions how I can fix this? I can't seem to recover Time Capsule back-ups prior to the OSX upgrade even though I have been faithfully backing up to a Time Machine.
    Help please.

    First of all, open System Preferences > Users & Groups > Login Options, and set your old user account in "Automatic login". By doing this, your computer will always log in with your old account.
    Then, log in your old account, where you will be able to delete the new user that OS X Mavericks forced you to create. Other users have reported the same problem

  • How can I check for keylogger and other malicious software on a used Mac

    I purchased a used iMAC (Late 2012 21.5") and it has OSX 10.9.4.
    How can I ensure that it is clean and doesn't have any password or key logging or other malicious software installed in it ?
    I basically want to ensure I have a clean iMac at the start and not have to worry about security.
    Thanks

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • Why can't I send messages to other desktop users through iMessage?

    I recently started a new job and they use iMessage to talk to each other. I created an account and added a contact that has and uses iMessage but whenever I try to send a message it tells me the message could not be sent because they are not registered.
    When I go to Messages / My Status my options are greyed out.

    Sign out of iMessage, then log out or restart the computer. Try again. If there's no change, launch the Contacts application and make sure you have only one card for yourself.

  • How can I share my ical with other users on the same machine?

    Having recently bought an imac I set up accounts for the family. I'd like to share a generic calendar with everyone that only the adults can read/write, but want to allow everyone to hold their personal calendars at the same time. All the accounts are on the same machine. Can this be done? If so how?

    You can only do this by syncing your calendar to an external server - MobileMe is designed for this but if you don't already have a MobileMe account you can't start one now.
    If you do have a MobileMe account the method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/sharedcalendar.html#publicshare
    If you don't, you could sync to Google Calendar (Google accounts are free) or wait for iCloud which should be out in a couple of months and will probably provide this sort of facility.
    You might like to consider BusyCal which is like iCal Pro - similar to iCal but with extra facilities. It can sync calendars on a Lan and also between accounts on the same machine (you have to have fast user switching enabled).
    There is a free trial available on their website: it's slightly cheaper from the Mac App Store. (I have no connection with this company).

  • How can I add my photo to other users

    In setting up my wife's User account on our jointly owned iMac (Mountain Lion), I chose the cat from the optional images. I'd like to replace this with an image of our own choice, but can't see a way to do that. Suggestions welcome!

    Does Profile Picture: Apple Support help ?

  • How can view/access Enterprise manager to other user?

    Hi,
    We have one request regarding accessing grid enterprise manager console.
    I have create user TEST which privilege required to view/access the db console using this user?.

    Error that you have described above happens when test user connect,if this is the scenario....
    what is the output of this command
    SQL>select username,account_status from dba_users where username='TEST';
    If status of test user is lock then unlock it by following command:--
    SQL>alter user test account unlock;
    And if its grid control then see below mentioned link , Search with keyword privileges:---
    http://docs.oracle.com/cd/B16240_01/doc/install.102/e10953/getting_started_with_em.htm

  • TS2755 Won't let me send messages to other apple devices

    I am receiving messages from other apple devices but I can't send back any messages.

    See:
    iOS: Troubleshooting Messages
    Note yu can only send Messages to other users who have Messages on their iPod touch, iPad or iPhone

  • It won't let me send messages to other people

    It won't let me send messages

    See:
    iOS: Troubleshooting Messages
    Note yu can only send Messages to other users who have Messages on their iPod touch, iPad or iPhone

  • HT1495 How can I send messages to other iPad users when we all have the same aacount

    How can I send messages to other iPad users when we all have the same aacount

    Use different Apple ID's.

  • Can I send notification message to other users?

    Hi all,
    Can abap webdynpro send out notification messages to other users in a portal? If a new user select some employees that have overwritten other same users selection, I need to send out notification message to other users that their selection have been resetted by this particular user. Can this be done in abap webdynpro?

    In NetWeaver 7.0 Enhancement Package 2 there is a new feature called Web Dynpro Notification Service. It lets you send events to any other applications which are listending for that same event id.  In a demo that comes with 7.02 we use this technology to create a chat application.  However this functionality has to be built into each application.  They must have an event handler ready to respond to the event.
    So you could build what you describe into your application - but only as of 7.02.  7.02 for the Business Suite comes with BS7i2010 which is currently scheduled to start ramp-up in Q4.

  • Error message (-51) keeps coming up when I try to send music from iTunes to my iPhone and then the music won't come over.  How can I fix this message?

    Error message (-51) keeps coming up when I try to send music from iTunes to my iPhone and then the music won't come over.  How can I fix this message?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Can't receive text messages from other iphone users but can receive them from non-iphone users

    I had to recently reinstall mavericks to my MacBook and suddenly I haven't been able to receive text messages from iphone users on my iphone.  I can send them but not receive them.  Recently I was able to receive a text from an iphone user who turned off his imessages before he texted me.  That came through. Of course, this would be difficult to ask every iphone user i know to turn off imessages in order text me.  I've also tried to turn off my imessage on my macbook, iphone and ipad and still can't receive them.  Lastly, I've also tried resetting my networking settings and that didn't help either.  Any suggestions???

    I am having the same problem minus the fact that I don't have a Mac computer I just can't receive any messages from iPhone users and I can't turn my iMessage back on at all it keeps just turning it off every time I try to turn it on. any help would be greatly appreciated.

  • How can automatic save file from apex to user local directory?

    how can save pdf file from apex to user local directory on button click?

    >
    Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "940509".
    When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
    With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
    how can save pdf file from apex to user local directory on button click?As Tony points out the ability to do so would represent a major security breach. The normal approach is to present the user with a download link that when clicked prompts them with a Save dialog in which they can select a location for the downloaded file.
    What is the source of the PDF file?

  • How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

    How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

    You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

Maybe you are looking for