How communicate two host in internet ( p to p )
hi
i am developing vedio confirencing application . using jmf & rtp
i need idea how to connect two system in network.
Hi Antonio,
Are you able to ping both network from each other ?
If you are able to ping you Solution Manager from that network you can add that system in solution Maanger and then you can connect that SLD also.
Please also see below link that may help u
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Connect+Managed+Systems+to+SLD
http://wiki.sdn.sap.com/wiki/display/EP/4+SLD+(Post+Install)
Similar Messages
-
How communicate two SLD in different networks together?
Hi,
we have installed a central SLD. Some SAP systems (ABAP and JAVA stacks) send their system data directly to a central SLD. But one java stack (NW 7.0) runs in a separate network and can not communicate directly with the central SLD. But there is a linux server with open connections to both networks. Is it possible to send data from the java stack over the linux server to the central SLD? Which software must be installed on the linux server?
Some technical help or suggestions will be useful for us.
Thanks and regards,
HelmutHi Antonio,
Are you able to ping both network from each other ?
If you are able to ping you Solution Manager from that network you can add that system in solution Maanger and then you can connect that SLD also.
Please also see below link that may help u
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Connect+Managed+Systems+to+SLD
http://wiki.sdn.sap.com/wiki/display/EP/4+SLD+(Post+Install) -
RE: how can two Forte installtion communicate
Hi,
I have similar arrangement here but for "user acceptence test". However,
may I remind you that when some objects/codes got checked out --> overwrite
with new import --> integrate --> check out again. Some funny things ( I
would say corruption ) may happen. I have one time that a normal old piece
of code got compilation error and no one can find out why. The last resort
is that I deleted everything and start from scratch again. Then everything
works.
Thus, I would suggest that from time to time, you should start out with a
new repository instead of using it over and over again in this fashion.
Maybe you can archive the old one as a version backup.
Regards,
Peter Sham.
-----Original Message-----
From: Kalidindi, Ravi CWT-MSP [SMTP:[email protected]]
Sent: Tuesday, February 16, 1999 1:10 AM
To: 'Nick Delany'; 'Jim Rice'
Cc: [email protected]
Subject: RE: how can two Forte installtion communicate
Nick...
We have a similar situation here. We have about seven teams,
each
with their own repositories with interdependent code.
Let me give you a simple scenario to explain how you can
make it
work:
Problem
--Team A is responsible for projects 1,2,3 and use repository RepA
--Team B is responsible for projects 4,5,6 adn use repository RepB.
--Project 2 is a supplier plan to project 5 and project 3 is a
supplier plan
to project 6.
Solution
--each repository is reponsible for some projects and these projects
can be
changed only in that repository.
--each repository also has a workspace called "SlaveProjects"
--This workspace has all the projects that are needed but are not
developed
by this team.
--These projects are checked out so that no one else can change them
-- so, RepB's slaveProjects workspace will have projects 2 and 3
(and other
projects they need).
-- You can also password protect the slaveProjects workspace.
-- When team A thinks they have a new working(or atleast compilable)
"version" of projects 2 and 3, they can trigger of an fscript which
will
export the projects 1 and 2, possibly save it in version control.
-- team B can then trigger another fscript which will pull the code
from
version control, import the projects 1 and 2 into RepB's
slaveProjects
workspace, integrate it and recheck everything out.
Options
-- you can get fancy with the scripts
-- you can add the two scripts together to do the whole thing in one
shot.
However existense of many such repositories can cause integrate
failures and
you might not know where exactly it stopped. You need to log the
output to
keep track.
-- you should probably make the second script actually create a
temporary
workspace, and import projects there and integrate. This is in case
you had
many other projects in the slaveprojects workspace that need not be
integrated and rechecked out each time.
-- you could create an application in forte or VB etc.. to make this
process
more sophisticated.
Hope that gives you a start. Different locations definetly
adds more
complexity to this, but the concept should be the same. If you have
more
questions or need more help, I suggest you call Len Lopez at
612-594-2539
who has played around with this stuff a lot. He put in place a VB
app that
does most of the stuff for us and will probably make a presentation
at the
Forte Forum this year on the same topic.
Good Luck!
-Ravi Kalidindi
Born Info Svcs Group.
> -----Original Message-----
> From: Nick Delany [SMTP:[email protected]]
> Sent: Monday, February 15, 1999 10:27 AM
> To: 'Jim Rice'
> Cc: [email protected]
> Subject: RE: how can two Forte installtion communicate
>
>
> Jim,
>
> Rajiv may not be referring to scenario 1, but I'm involved in
something
> like
> that.
> We're a bi-located team, and while we are trying to split up the
work to
> minimise the geographical dependancies, I'd be interested in
anything you
> might have to say about the best way to share code/repositories.
>
> Nick
>
> -----Original Message-----
> From: Jim Rice [mailto:[email protected]]
> Sent: 08 February 1999 22:38
> To: Rajiv Srivastava
> Cc: [email protected]
> Subject: Re: how can two Forte installtion communicate
>
>
> Rajiv,
>
> Can you elaborate ? I can see your questions leading toward at
least the 3
> following scenarios....
>
> 1. Are you asking about 2 different independent developer groups
which
> have
> only the internet as a possible connection pipe between them,
> or
> 2. Are you asking about 2 deployed applications which are the same
> application but deployed to environment production1 and redeployed
to
> environment production2
> or
> 3. Are you asking about 2 deployed applications whic are different
> applications and each is deployed to either
> 3a. a common deployment environment using the same
"Forte_NS_ADDRESS"
> 3b. two seperate deployment environements using the different
> "Forte_NS_ADDRESS" and therefore may even be on sepearte LAN/WAN's
>
> -Jim
>
> At 11:33 AM 2/8/99 , Rajiv Srivastava wrote:
> >Can somebody tell me that what r the possible way where two
different
> >independent Forte Installation can communicate to each other.
> >and share certain the information.
> >
> >thanking you in anticipation.
> >
> >Rajeev
> >
> >-
> >To unsubscribe, email '[email protected]' with
> >'unsubscribe forte-users' as the body of the message.
> >Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
> >
> Jim Rice mailto:[email protected]
> Partner ConCall @ Feb 17
> http://www.forte.com/events/frameset_partners.html
> Forte Usr Mtg @ May9-12 http://forum99.forte.com
> Partner Tech Specialist Work#: 301-721-1910
>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi,
I have similar arrangement here but for "user acceptence test". However,
may I remind you that when some objects/codes got checked out --> overwrite
with new import --> integrate --> check out again. Some funny things ( I
would say corruption ) may happen. I have one time that a normal old piece
of code got compilation error and no one can find out why. The last resort
is that I deleted everything and start from scratch again. Then everything
works.
Thus, I would suggest that from time to time, you should start out with a
new repository instead of using it over and over again in this fashion.
Maybe you can archive the old one as a version backup.
Regards,
Peter Sham.
-----Original Message-----
From: Kalidindi, Ravi CWT-MSP [SMTP:[email protected]]
Sent: Tuesday, February 16, 1999 1:10 AM
To: 'Nick Delany'; 'Jim Rice'
Cc: [email protected]
Subject: RE: how can two Forte installtion communicate
Nick...
We have a similar situation here. We have about seven teams,
each
with their own repositories with interdependent code.
Let me give you a simple scenario to explain how you can
make it
work:
Problem
--Team A is responsible for projects 1,2,3 and use repository RepA
--Team B is responsible for projects 4,5,6 adn use repository RepB.
--Project 2 is a supplier plan to project 5 and project 3 is a
supplier plan
to project 6.
Solution
--each repository is reponsible for some projects and these projects
can be
changed only in that repository.
--each repository also has a workspace called "SlaveProjects"
--This workspace has all the projects that are needed but are not
developed
by this team.
--These projects are checked out so that no one else can change them
-- so, RepB's slaveProjects workspace will have projects 2 and 3
(and other
projects they need).
-- You can also password protect the slaveProjects workspace.
-- When team A thinks they have a new working(or atleast compilable)
"version" of projects 2 and 3, they can trigger of an fscript which
will
export the projects 1 and 2, possibly save it in version control.
-- team B can then trigger another fscript which will pull the code
from
version control, import the projects 1 and 2 into RepB's
slaveProjects
workspace, integrate it and recheck everything out.
Options
-- you can get fancy with the scripts
-- you can add the two scripts together to do the whole thing in one
shot.
However existense of many such repositories can cause integrate
failures and
you might not know where exactly it stopped. You need to log the
output to
keep track.
-- you should probably make the second script actually create a
temporary
workspace, and import projects there and integrate. This is in case
you had
many other projects in the slaveprojects workspace that need not be
integrated and rechecked out each time.
-- you could create an application in forte or VB etc.. to make this
process
more sophisticated.
Hope that gives you a start. Different locations definetly
adds more
complexity to this, but the concept should be the same. If you have
more
questions or need more help, I suggest you call Len Lopez at
612-594-2539
who has played around with this stuff a lot. He put in place a VB
app that
does most of the stuff for us and will probably make a presentation
at the
Forte Forum this year on the same topic.
Good Luck!
-Ravi Kalidindi
Born Info Svcs Group.
> -----Original Message-----
> From: Nick Delany [SMTP:[email protected]]
> Sent: Monday, February 15, 1999 10:27 AM
> To: 'Jim Rice'
> Cc: [email protected]
> Subject: RE: how can two Forte installtion communicate
>
>
> Jim,
>
> Rajiv may not be referring to scenario 1, but I'm involved in
something
> like
> that.
> We're a bi-located team, and while we are trying to split up the
work to
> minimise the geographical dependancies, I'd be interested in
anything you
> might have to say about the best way to share code/repositories.
>
> Nick
>
> -----Original Message-----
> From: Jim Rice [mailto:[email protected]]
> Sent: 08 February 1999 22:38
> To: Rajiv Srivastava
> Cc: [email protected]
> Subject: Re: how can two Forte installtion communicate
>
>
> Rajiv,
>
> Can you elaborate ? I can see your questions leading toward at
least the 3
> following scenarios....
>
> 1. Are you asking about 2 different independent developer groups
which
> have
> only the internet as a possible connection pipe between them,
> or
> 2. Are you asking about 2 deployed applications which are the same
> application but deployed to environment production1 and redeployed
to
> environment production2
> or
> 3. Are you asking about 2 deployed applications whic are different
> applications and each is deployed to either
> 3a. a common deployment environment using the same
"Forte_NS_ADDRESS"
> 3b. two seperate deployment environements using the different
> "Forte_NS_ADDRESS" and therefore may even be on sepearte LAN/WAN's
>
> -Jim
>
> At 11:33 AM 2/8/99 , Rajiv Srivastava wrote:
> >Can somebody tell me that what r the possible way where two
different
> >independent Forte Installation can communicate to each other.
> >and share certain the information.
> >
> >thanking you in anticipation.
> >
> >Rajeev
> >
> >-
> >To unsubscribe, email '[email protected]' with
> >'unsubscribe forte-users' as the body of the message.
> >Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
> >
> Jim Rice mailto:[email protected]
> Partner ConCall @ Feb 17
> http://www.forte.com/events/frameset_partners.html
> Forte Usr Mtg @ May9-12 http://forum99.forte.com
> Partner Tech Specialist Work#: 301-721-1910
>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Connecting Two PC using internet connection ??
Hi,
I want to develop one software so that I can connect two PC using internet connection means one is host and another is remote.So that I can access remote PC's Hard drive using internet connction.Can any one plz give me some guideline how I can start.Eagerly waiting for someone reply.
Thanks & Regards
BikashThis is not what you have in mind, but it will work.
Create a server that listens for connections from a client. Create a list of commands that can be issued by client to view information. Such a list in your case would be similar to the following:
Open
ChageDir
Rename
CreateDir
DeleteDir
ListDir
Next, you need to implement the processes that will actually do the command on the remote computer. When the client issues the "ListDir" command, then adds a line (the path of the directory to list) the server should then do this (vary simple, but you get the idea):
File file = new File(theDirectory);
if (file.isDirectory()) {
String[] list = file.list();
socketOutputStream.println("Directory " + theDirectory);
for (int i=0; i<list.length;i++) {
socketOutputStream.println(list);
socketOutputStream.flush();
So, you should get the idea from this. For each command, have a method to handle the actual work on the server-side, then have the server send the resulting data back to the client for display. Notice how much this looks like DOS. It's the same idea - a command line interface (called a CLI). -
How do I host multiple domains on a single Messaging Server?
How do I host multiple domains on a single Messaging Server?
<p>
To host multiple domains on one Messaging Server, use the
mailAlternateAddress attribute. If you want to host two domains
(customer1.com and customer2.com) on your server mail1.domain.com,
make sure that:
The various domains (in DNS) point to the installed mail server
(you must have the MX records that
points mail for customer1.com to mail1.domain.com and
customer2.com to mail1.domain.com)
That each person receiving mail at customer1.com and
customer2.com has an appropriate mailAlternateAddress
attribute describing the appropriate email address. For
instance, John Doe can have an email address (i.e. the value
of the 'mail' attribute for the John Doe LDAP entry) of
[email protected] and receive his mail on
[email protected] (the value of the mailAlternateAddress
attribute)
With Messaging Server 3.5, mailAlternateAddress can take the
form of @mail1.domain.com. If jdoe's mailAlternateAddress is
set to @mail1.domain.com, mail sent to [email protected]
will be delivered to [email protected]jaygatsby1123 wrote:
So what exactly am I doing with virtual hosts? There is a place for Aliases... What would I put in the "Aliases" box?
Any other host name that you want to resolve to the specified virtual host. It's quite literally an alias.
if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified. The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol. The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client. One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host. -
How do I get the internet traffic to come to my own server?
If I'm moving from paying a host for coldfusion to using my own license on my own server, How do I get the internet traffic to come to my own server?
You connect the computer to a network. This is pretty much automatically handled by the hardware and the operating system.
You may want to read up on some of the basics of networking and the tcp/ip world.
To have a networked computer tell you its IP address type 'ipconfig' at a dos command line. -
Problem in Rmi in machine with two IP local & internet
I am having problem in Rmi in machine with two interfaces local & internet
i.e..
if I set property java.rmi.server.hostname+ to the one with internet ip address using System.setProperty()
I can not access Rmi through local LAN
if I do not set the property Everything works fine in LAN but I can not access the RMI from Internet
Pls tell me the solutionConsider the code Here and if you can suggest in this code what changes I have to make ,I will be thankful to you
// Class MyHelloServer
package rmi.server;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.net.Inet4Address;
import java.net.InetAddress;
import java.net.MalformedURLException;
import java.net.NetworkInterface;
import java.net.SocketException;
import java.rmi.*;
import java.rmi.server.ServerNotActiveException;
import java.util.ArrayList;
import java.util.Enumeration;
import javax.swing.JOptionPane;
import rmi.bl.HelloImpl;
public class MyHelloServer
static public ArrayList hostList = new ArrayList();
static String hostname=null;
static String SERVER_PORT="9999";
static String MULTIPLE_BIND="true";
static{
startTest();
public static void startTest(){
try {
Enumeration enum1= NetworkInterface.getNetworkInterfaces();
while(enum1.hasMoreElements()){
NetworkInterface networkInterface = (NetworkInterface)enum1.nextElement();
Enumeration enum2 = networkInterface.getInetAddresses();
while(enum2.hasMoreElements()){
Object obj = enum2.nextElement();
if(obj instanceof Inet4Address){
if(!hostList.contains(((Inet4Address)obj).getHostAddress())){
hostList.add(((Inet4Address)obj).getHostAddress());
if(networkInterface.isPointToPoint()){
hostname=((Inet4Address)obj).getHostAddress();
}catch (SocketException e) {
e.printStackTrace();
if(hostname!=null){
System.setProperty("java.rmi.server.hostname", hostname);
System.out.println(System.getProperty("java.rmi.server.hostname")+"<<<<<< New");
public static void main(String args[])
try
HelloImpl storeServer = new HelloImpl();
int port=Integer.parseInt(SERVER_PORT);
String host=InetAddress.getLocalHost().getHostAddress();
java.rmi.registry.LocateRegistry.createRegistry(port);
if(MULTIPLE_BIND.equals("true")){
for (int i = 0; i < hostList.size(); i++) {
System.out.println(hostList.get(i).toString() + " <<<<IP" + i);
Naming.rebind("//"+hostList.get(i).toString()+":"+port+"/STORESERVER", storeServer);
}else{
Naming.rebind("//"+host+":"+port+"/"+"STORESERVER", storeServer);
MyHelloServer.MyThread thread= new MyThread(":"+port+"/"+"STORESERVER", storeServer);
System.out.println("Remote Server started.....");
catch (java.net.MalformedURLException me)
System.out.println("Malformed URL: " + me.toString());
System.exit(0);
catch (RemoteException re)
System.out.println("Remote exception: " + re.toString());
System.exit(0);
catch (Exception e)
System.out.println("Error: " + e.toString());
System.exit(0);
static class MyThread extends javax.swing.JPanel implements ActionListener{
String str="";
HelloImpl impl;
public MyThread(String text,HelloImpl storeServer){
this.impl=storeServer;
str=text;
int timetoWaitForCheck=15000;
javax.swing.Timer timer = new javax.swing.Timer(timetoWaitForCheck, this);
timer.start();
public void actionPerformed(ActionEvent ae)
startTest();
// Rebind
for (int i = 0; i < hostList.size(); i++) {
try {
Naming.rebind("//"+hostList.get(i).toString()+str, impl);
} catch (RemoteException e) {
e.printStackTrace();
} catch (MalformedURLException e) {
e.printStackTrace();
} -
Hi,
I have some problem connecting to database. I want to connect to 9i database from 8i client. Database has two host names(logical partition) sharing one SID (one IP). I have configured host and tnsnames.ora for two hostnames but both connect to same instance. How this can be solved?
Thanks
vgHi,
By registering a developer in service market place we will get a developer key. So it is depends on the customer number in SAP and the SID you are using when you are applying for the license in Market place.
If you use same SID with the same customer number you can use the same developer key for two different installations.
Thanks,
Ven -
How to specify Host Server for Replicated Virtual Desktops within RDVH Collection
My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
Now I wanted to make it easy for my users I build a Connection Broker: RDCB
All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
the running ones from RDS02.
How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
Thanks in advance.Hi Robin,
Thanks for your patience.
After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How do I host a website with server?
How do I host a website with server?
Set up public DNS with a DNS provider pointing to your public static IP address, set up private DNS on your local network (OS X Server requires this) using Server.app DNS services, set up port-forwarding for TCP port 80 and TCP port 443 at your firewall-gateway from your public static IP address through NAT to your private static IP address, establish one or more virtual hosts (web sites) within the web setup of Server.app, and populate the web directories with the contents you wish to serve. Those contents will be the text data and/or images or other data you wish to serve, and may be a web content management system that can store and retrieve the web content and manage the links among pages, the theming and the rest of the baggage.
It's often easier and cheaper for a small-scale entity or a low-traffic web site to be hosted by any of various web-hosting providers. They provider deals with keeping the content management system and the servers current, having enough server and network bandwidth to serve the contents to the Internet, and you can concentrate on the web site contents. -
What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple to approve. We want to host the app elsewhere. How do we host our DPS app on our client's website? Thanks.
Unless I misunderstand the question, you can't do what you're asking to do. Apple doesn't allow you to bypass their store and host public apps on a website. The exception is an enterprise app, which requires an Enterprise account with both Apple and Adobe. This type of enterprise app can be distributed only within the company. If that's what you want to do, you can learn more here:
Digital Publishing Suite Help | Creating viewer apps for private distribution
Distributing enterprise iOS viewer applications with Digital Publishing Suite | Adobe Developer Connection
Another option is to add the development app to several devices and use those for your demo. -
How can I use the Internet on MY I phone?
Don't understand.
Tap the Safari icon. You will be on the internet.
The iphone is designed to always have access to the internet.
What exactly is your issue? -
How can I get safe internet for protect my phone and PC
How can I get safe internet for protect my phone and PC. l lose all internet account I've three year. i lose my phone all app for a day even I safe all informating and apps in ICloud but I lose all my phone information . Like I have new phone and I do not have all my date . For new phone i can not use over 10 apps for my phone
You can't. But if you backed up your computer prior to wiping it out, you should be able to restore your iTunes library, contacts, photos, etc. from that backup. Once you do, you can set the phone up again and just sync everything from your library back to it.
If you didn't back the computer up either, you can transfer items purchased on the phone into iTunes, and if you set up at least one contact in whatever application you sync your contacts to on the computer, it will offer to merge the address books on the first sync, saving those. Any media you'd acquired from sources other than the iTunes store will have to be re-downloaded from the source or re-ripped.
The iPhone is NOT a backup device. -
How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.
Have the project, events and media on one drive which is common to both macs.
You can download FCP X to both macs using the same Apple ID that it was purchased with.
Andy -
How do two users on the same iMac use the same iPhoto library?
How do two seperate users on an Imac, use the same iphoto library?
See iTunes: How to share music between different user accounts on a single computer.
tt2
Maybe you are looking for
-
2 Clock/Time display on Ipod. One on top of the other.
This is only visually available when I have my Ipod docked and when I attempt to input my password. No idea as to how I can remove this. I noticed that 1 time stamp (reads: 6:26) never changes under the current time and I saw a difference after Dayli
-
Is there a reason why the iPhone does not support custom ringtones for calendar reminders, v-mail notifications, and incoming SMS notifications? This is basic functionality which has been present in most other cell phones for the past 10 years. Also,
-
Balance sheet adjustment account getting posted when customer clearing
Hi All, Since lately when clearing CERTAIN customer open items when there is an exchange rate difference, its posting in to the balance sheet adjustment account instead of the gain/loss P&L accounts.... What can be the reason to this? When does the
-
I found the following MSDN registry fix which resolved the issue of IE7 not loading (viewing) .swf flash files. I accomplished BOTH registry changes, however the second one fixed the problem. As indicated below MSDN will have a follow up KN article o
-
How to manage photos saved online
I just started using photoshop yesterday and today i get this message that my online storage is full and looks like i should order more storage for photoshop to work again. I dont want to buy more storage yet i want to learn first how this works. How