How Create a dynamic filter on Segment
Hi guys.
I have already the complete integration between Oracle BIEE and Siebel MARKETING.
So i want to create, in the oracle BI side, a single segment filtered with a System Parameter-->"Campaign origin code".
Because i want define only 1 segment,with a constant load campaign format associated defined and associated to segment only one time, and after use this dynamically during a load campaign process.
For you is possible that this segment take dynamically, without re-save or re-update_count on BI, the correct data filtered for "Campaign origin code". Or is necessary every time change the sementation criteria and saving or making an update count on the oracle BI?
1) if I use the dynamyc filter in the campign origin code on the load format and after define a segment using this load format don't work correctly --> extract nothing.
What i can do About this? Is there some guide or someone that have or had in past the same problem?
Thanks in advance
Best reguards
If you need the kind of advanced dynamic stamp that it seems you want, one that prompts you for data to include in the stamp just prior to it being applied to the page, it will require JavaScript. In particular, it will likely best be done with a custom dialog, which requires some rather arcane scripting. I usually advise folks in your position to find someone to do this for you, at least for the first stamp. Feel free to send a PM if you'd like professional help.
The following book has more information about custom stamps, but lacks much information about the type of dynamic stamp that you're wanting to create: http://www.amazon.com/About-Stamps-Acrobat%C2%AE-Paperless-Workflows/dp/0985614706
That last part isn't a criticism of the book, which is very good. Custom dialogs are complicated, and using them with stamps adds more complication, so the subject really needs a book of its own to be handled thoroughly.
Similar Messages
-
How to retrieve dynamic filter value submitted from control query to broadcast query.....
I'm trying to change the hierarchy version determined by a userexit variable in the broadcast query.
The Hierarchy Version should be dependent on the input filter delivered by the bursting query.
But how do I catch the dynamic filter value which has been submitted by the bursting query,
with other words: where does the bursting query store it's out put while sequentially starting the broadcast query value by value?
BTW: the filter value from the bursting query appears under "dynamic filter values" in the information of the broadcast query...
Any thoughts are welcome!
Edited by: Heinrich Krupp on Jun 24, 2009 1:25 PMFurther information,
Report is used via webi only, not Xcelsius or Dashboard.
Report is consuming BI Web Services.
Although we can pass in prompt values to BI Services, I couldn't find if we could pass a variable or dimension object into this field. Anyone knows? -
Passing Dynamic Filter values to Web template in VC
Hi Experts,
Iam working with a Web Template (which is created using WAD) in Visual Composer Model
I have an input screen ( Variables Form )in VC Iview which has Fiscal Year, Quarter, week and other input fields which need to be entered by a user.
This variables are passed to a couple of queires. Also i have a requirement to pass the same vvariable values to Web template also ( WAD)
I have created a HTML iview in VC Dashboard.and in URL i gave the below URL which is working fine
"pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=YWEB_PLANNING_ADLAYOUT_2"
But i wanted the template to be executed with filter values also
in the actual template i have 4 filters which user needs to enter after the above URL is displayed..
In order to make the template execution dynamic i added the following URL which is not working:
http://Host:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=YWEB_PLANNING_ADLAYOUT_2%26FILTER_IOBJNM%3DZFISCYEAR%26FILTER_VALUE%3D2009%26FILTER_IOBJNM%3DZREP_WEEK%26FILTER_VALUE%3D42%26FILTER_IOBJNM%3DZFISCALQTR%26FILTER_VALUE%3D3%26FILTER_IOBJNM%3ZNSPLITREG%26FILTER_VALUE%3DAS%26FILTER_IOBJNM%3DZRSKOPP%26FILTER_VALUE%3DR
Please let me know how to pass dynamic filter values from "Variables Form" of VC iview to Web template HTML iview
Thanks
P.NavakanthHi,
this is my sample:
'http://**********/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=TESTE1&DUMMY=0&BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING='&DSTR(NOW(),'MMYYYY')&'&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=GLIPM002&BI_COMMAND_2-BI_COMMAND_TYPE=SET_SELECTION_STATE_SIMPLE&BI_COMMAND_2-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=&BI_COMMAND_2-CHARACTERISTIC=GLC000079&BI_COMMAND_2-RANGE_SELECTION_OPERATOR-EQUAL_SELECTION-MEMBER_NAME=****' -
How to use the filter facet on af:column
I have a column in my VO that is defined as a boolean and that shows as a selectBooleanCheckbox in my table. My table has filters on but above the boolean column it shows a regular input field.
I checked the filter facet and i also put a selectBooleanCheckbox in it but i don't know how to set the values so the data will be filtered when the value of the checkbox changes.
<f:facet name="filter">
<af:selectBooleanCheckbox id="cbFilt"/>
</f:facet>For an example that uses a selectOneChoice, easily adaptable to a selectBooleanCheckbox solution, please see:
Re: how create selectOneChoice in filter facet of af:column _ jdeveloper11g.
Regards,
Matthew -
My challenge at the moment is that I need to create a dynamic filter. To explain this is a cascading filter but not your normal cascading filter,
ie, Year/Month/day etc.
Here we have a single Dimension, Organisation. It contains every level of a business,
Site,
Dept,
Company name,
Division
Holding
Strategic Area
From these as a default we have 4 built hierarchies with a different combination of the above.
Activity (Strategic Area, Dept)
Organisation (company Name, site, Dept)
Sites (Division, Site)
Holdings(Holding, Strategic Area, site, Dept)
At any given time we have have additional Hierarchies created within the Dimension, further adding to the hierarchy list.
We now have a challenge where we require our users to be able to in the first filter select the Hierarchy they want to use, ie, Holdings, Site, Organisation
or Activity. This should then cascade to the second filter and contain the relevant hierarchy and levels as a multi select filter. Of course this also needs to be connected to number of graphs, charts and scorecards on the page, dynamically.
I have gone around the houses to get this to work but not having any luck. Tried the variety of filters available, MDX, member selection, tabular,
SharePoint, and attempted to mix and match to get this to work. I cannot find a way but I don't believe this is not possible.
If it is not possible we must look around for another front end solution for our BI Dashboards which I would prefer to avoid. Any response or suggestion
would be much appreciated.
Regards,
ShebHi Sheb,
Please check the articles below and see if cascading filter in PerformancePoint Dashboard can be help:
http://technet.microsoft.com/en-us/library/hh272541(v=office.15).aspx
http://www.dotnetcurry.com/showarticle.aspx?ID=872
Regards,
Rebecca Tu
TechNet Community Support -
Class to Generate Dynamic Filter Function
I have built an ActionScript Class to allow me to create a
dynamic Filter Function for the several ArrayCollections I use in
my Flex Application. It works just as I intended, however, I'm
wondering if it's too verbose, and can be skimmed down to use less
code. For example, is there some way I could extend the Function
class? See a snippet of my Class attached.I have built an ActionScript Class to allow me to create a
dynamic Filter Function for the several ArrayCollections I use in
my Flex Application. It works just as I intended, however, I'm
wondering if it's too verbose, and can be skimmed down to use less
code. For example, is there some way I could extend the Function
class? See a snippet of my Class attached. -
How to add a dynamic filter in query panel
I want to display the data in recent week, is it possible to add a dynamic filter in query panel?
eg. filter--> actionDate >= CurrentDate - 7
BO version: BOX I 3.1We are still trying to get this filter to work. Can anybody give us an example of how it should look on the sensor?
The sensor filter that we would like to create should exclude any source IP, any source port to specific destination hosts on all destination ports (icmp has none) from capturing events and storing them in the event store on the sensor.
This is the filter that we have so far on the sensor. Whats the problem with it?
service event-action-rules rules0
filters edit icmp-w-echo-filter-sensor-sensor-0-D
signature-id-range 2100
subsignature-id-range 0-255
attacker-address-range 0.0.0.0-255.255.255.255
victim-address-range a.b.c.x,a.b.c.y
attacker-port-range 0-65535
victim-port-range 0-65535
risk-rating-range 0-100
no actions-to-remove
deny-attacker-percentage 100
filter-item-status Enabled
stop-on-match False
no user-comment
exit
filters move icmp-w-echo-filter-sensor-sensor-0-D begin
exit -
Creating dynamic filter which shows next 30 days
Hi,
How to create dynamic filter which shows next 30 days?
I've tried greater than or equal to TIMESTAMPADD(SQL_TSI_DAY, 30, CURRENT_DATE) but it doesn't work.Hi,
I think it should be something like below (inclusive of current month)
You may have to test this out
(YEAR("Close Date".Date) >= YEAR(CURRENT_DATE) AND
MONTH("Close Date".Date) >= MONTH(CURRENT_DATE)
) AND (YEAR("Close Date".Date) <= YEAR(TimestampAdd(SQL_TSI_MONTH,11, CURRENT_DATE)) AND MONTH("Close Date".Date) <= MONTH(TimestampAdd(SQL_TSI_MONTH,11, CURRENT_DATE)))
Hope it helps
-- Venky CRMIT -
Hi All,
Suppose I have table, whose structure changes frequently on daily basis.
For eg. desc my_table gives you following column name on Day 1
SQL > desc my_table;
Output
Name
Age
Phone
On Day 2, two more columns are added, viz, Address and Salary.
SQL > desc my_table;
Output
Name
Age
Phone
Address
Salary
Now I want to create an Dynnamic RTF report which would fetch data from ALL columns from my_table on daily basis. For that I have defined a concurrent program with XML as output type and have attached a data template/data definition to it which takes in XML as input and gives final output of conc program in EXCEL layout. I am able to do this for constant number of columns, but dont know how to do it when the number of columns to be displayed changes dynamically.
For Day 1 my XML file should be like this.
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="XYZ" description="iExpenses Report" Version="1.0">
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
SELECT Name
,Age
,Phone
FROM my_table
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_my_table" source="Q2">
<element name="Name" value="Name" />
<element name="Age" value="Age" />
<element name="Phone" value="Phone" />
</group>
</dataStructure>
</dataTemplate>
And my Day 1, EXCEL output from RTF template should be like this.
Name Age Phone
Swapnill 23 12345
For Day 2 my XML file should be like this. With 2 new columns selected in SELECT clause.
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="XYZ" description="iExpenses Report" Version="1.0">
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
SELECT Name
,Age
,Phone
,Address
,Salary
FROM my_table
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_my_table" source="Q2">
<element name="Name" value="Name" />
<element name="Age" value="Age" />
<element name="Phone" value="Phone" />
<element name="Address" value="Address" />
<element name="Salary" value="Salary" />
</group>
</dataStructure>
</dataTemplate>
And my Day 2, EXCEL output from RTF template should be like this.
Name Age Phone Address Salary
Swapnill 23 12345 Madrid 100000
Now, I dont know below things.
Make the XML dynamic as in on Day 1 there must be 3 columns in the SELECT statement and on Day 2, 5 columns. I want to create one dynamic XML which should not be required to be changed if new columns are added in my_table. I dont know how to create this query and also create their corresponding elements below.
Make the RTF template dyanamic as in Day1 there must 3 columns in EXCEL output and on Day 2, 5 columns. I want to create a Dynamic RTF template which would show all the columns selected in Dynamic XML.I dont know how the RTF will create new XML tags and how it will know where to place it in the report. Means, I can create RTF template on Day 1, by loading XML data for 3 columns and placing 3 XML tags in template. But how will it create and place tags for new columns on Day 2?
Hope, you got my requirement, its a challenging one. Please let me know how I can implement the required solution using RTF dynamically without any manual intervention.
Regards,
Swapnil K.
Message was edited by: SwapnilKHi All,
I am able to fulfil above requirement. Now I am stuck at below point. Need your help!
Is there any way to UPDATE the XML file attached to a Data Definition (XML Publisher > Data Definition) using a standard package or procedure call or may be an API from backend? I am creating an XML dynamically and I want to attach it to its Data Definition programmatically using SQL.
Please let me know if there is any oracle functionality to do this.
If not, please let me know the standard directories on application/database server where the XML files attached to Data Definitions are stored.
For eg, /$APPL_TOP/ar/1.0/sql or something.
Regards,
Swapnil K. -
How to create the dynamic report
Hi,
please help me, how to create the dynamic reportHi,
Try this..
DATA: p_temp(30) TYPE c DEFAULT 'ZTEST_REPORT'.
TYPES: BEGIN OF t_abapcode occurs 0,
row(72) TYPE c,
END OF t_abapcod.
T_ABAPCODE-ROW = 'REPORT ZTEST_REPORT.'.
APPEND T_ABAPCODE.
T_ABAPCODE-ROW = 'WRITE: / ''TEST REPORT''. '.
APPEND T_ABAPCODE.
INSERT REPORT p_temp FROM it_abapcode.
SUBMIT (p_temp) AND RETURN.
DELETE REPORT p_temp.
Thanks,
naren -
How to create a dynamic hyperlink which point to a BLOB column
Hello,
I am fighting with the issue for about 2 days.
My purpose is to use Oracle Report Builder to build a report of our employee directory which contains employee's information and also employee's picture. The requirement is that our report is going to generate a html file to our web server. By creating a dynamic hyperlink to the Employee's name in the report output file (the html file generated to our web server), it should then display the corresponding employee's picture which is a BLOB column stored in our oracle database.
I only can create the hyperlink for the employee's name if the link is static, like 'http://www.google.com
But from the Oracle Reports 10g Release2 (10.1.2), about the exmaple 1: Dynamic hyperlink, I refered the link
http://www.oracle.com/webapps/online-help/reports/10.1.2/state/content/navId.3/navSetId._/vtTopicFile.htmlhelp_rwbuild_hs%7Crwcontxt%7Cprops%7Cpi_lay_hyperlink%7Ehtm/
The link gave he following example shows a value for the Hyperlink property that specifies a link to a destination identified dynamically:
'DEPT_DETAILS_' || LTRIM(TO_CHAR(:DEPTNO))
where :DEPTNO is a column value retrieved from the database at runtime.
I tried as the same way to want it dynamcially shows the column :EMP_PHTOT, which is one BLOB column, but it was failed.
Anyone knows how to implement this? Any inputs is appreciated!
Thanks,
JingThis forum is for the SQLDeveloper tool. You might get better responses on the reports forum Reports
-
How to create a dynamic form with bind variables :schema & :table_name
My application has two LOV's, one to select a schema, and the next to select a table within that schema. I then have a button which passes me to a report which displays the data in that table.schema.
I now want to create a link to a form where I can edit the record based on the rowid of that table.schema, but it doesn't appear that I can create a dynamic form where I pass the schema.table_name and rowid. Is this possible? Can anyone advise how I can do this? The form builder only wants a fixed schema/table name.
Thanks in advance.
Stuart.Hi Stuart,
In this sort of situation, you will need to be a bit creative.
I would suggest a pipeline function called as if it was a report.
Then you can pipe out the required fields.
Since you will have a variable number of fields, you could use two of the multi row field names for your field names and values.
Then after submit, you can create your own procedure to loop through the fields (stored for you in the Apex package) and update the table as required.
Not very specific I'm afraid, but it should work.
Regards
Michael -
How can I create a search filter on my muse project?
How can I create a search filter on my muse project like the 'sort by' function of this website? http://trufcreative.com/work
By that I mean be able to narrow down the content displayed on a single page (preferably with an animation) without having the switch pages or reload the browser.
I'm assuming this isn't something Muse can do natively, but if anyone knows the code, and how to make it work with Muse, that would be awesome.
Cheers!yes i have same problem. i couldnt create one. please help me
-
I have 5 tables
of which one table is transaction table which stores all the trasanctions
it has near about 30 colms
from which i need create a dynamic view...
where user have to passed 5, 6 parameters and get the result .
how can i create a precompiled view ..Why do you want to create a dynamic view.
It's a bad practice. You had already all column names.
I think , you can simply create a static view in design time. -
Hi there,
I was wondering whether anybody could tell me how to create a WMI filter in order to apply to machines that have Skype already installed with deploying a newer version of Skype.
Your help would be much appreciated.
Many thanks,
TimbuctooHi,
To create a WMI filter
1.In the Group Policy Management Console (GPMC) console tree, right-click
WMI Filters in the forest and domain in which you want to create a WMI filter.
2.Click
New .
3.In the
New WMI Filter dialog box, type a name for the new WMI Filter in the
Name box, and type a description of the filter in the Description box.
4.Click
Add .
5.In the
WMI Query dialog box, either leave the default namespace (root\CIMv2) or enter another namespace by doing one of the following:
◦ In the
Namespace box, type the name of the namespace that you want to use for the WMI query.
◦ Click
Browse , select a namespace from the list, and then click
OK .
6.Type a WMI query in the
Query box, and then click OK .
7.To add more queries, repeat Steps 4 through 6 to add each query.
8.After adding all queries, click
Save .
In the Query box, type the following WMI query:
Select * from Win32_Product where Name LIKE “%Skype%”
Best Regards,
Erin
Maybe you are looking for
-
First of all, this is not a virus. This is my a bug within windows explorer itself. So, I added the properties button to the QAT, and it displayed it as an expandable menu, like this: ";" but with small arrows like this: ">". didn't want this, I want
-
Xperia so-02c has a black screen since updating
Hello, I agreed to an Android update from Sony on 08/18/2012. It told me I needed to charge my battery before the update, so I did (although not fully) everything progressed fine until my phone powered off. Since then it hasn't powered back on. This
-
Error in process chain pushing step
Hi Experts, We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see th
-
"Went to work on my photos and something popped up that says, file 0ff-line or missing. This has never happened before. Can someone help? thank you!
-
How do I digitally sign DA forms (OS X 10.6.8)
Having problems with this.