How do I activate Iphone 5 --- it would not connect to network and then I did a reset and I can't get passed the hello screen and choose a language --- it just spins and spins -- any ideass??
Activate Iphone 5 --- after reset it won't activate -- just spins and spins and says try back later.
Possibly... but per the terms of use of these forums, discussion of jailbroken devices is not permitted.
<Edited by Host>
Similar Messages
-
How do I find out who my iPhone 4S is locked to? I can't get passed the activation screen.
How can you not know this? Where did you get the phone?
Ask whoever you bought it from or call AppleCare and give them the serial number. -
I am using a very old iPhone and have forgotten my password. Is there anyway to get passed the lockout screen? It says to connect to iTunes but when I do nothing happens. I've read through the user guide and am at a loss.
Bypass & Reset the iPhone Passcode
Disconnect the USB cable from the iPhone, leave the other end connected to your Mac/PC
Launch iTunes
Press and hold the Home and Power button on the top of the iPhone to turn off the device
Press and continue to hold the Home button while you reconnect the USB cable to your iPhone, this will cause the iPhone to turn on
Continue to hold the Home button until an alert message in iTunes appears that an iPhone in recovery mode has been detected
Now that the iPhone is in recovery mode, you must restore the device:
From iTunes, look under the “Summary” tab
Click on the “Restore” button within iTunes -
My Ipad 2 started talking to me. I can't activate anything - can't get passed the opening screen to slide to unlock. I can't get to Settings or any other page. Can you help, please??
If you need more help see:
iPad: Configuring accessibility features (including VoiceOver and Zoom) -
I just pluged in my Apple TV and I can't get passed the initial page that ask what language. My remote won't pair. holding the menu and right button for 6 sec
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
in gamil I can't get off the inbox screen to enter sent mail
hello cdecker22, please try to [[Clear the cache - Delete temporary Internet files to fix common website issues|clear the cache]] & [[Delete cookies to remove the information websites have stored on your computer|cookies from google.com]] and reload the page.
-
Won't load past question mark, MacBook 13 2012
Maybe you should post it in the Mac forum. This is iPhone forum.
-
My iphone 4s will not connect to networks. the button is greyed out and cannot turn on. I have reset the network settings and it still does not work - any ideas?
Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.
-
Hi, My Iphone 4 will not connect to my virgin superhub (netgear). Ive reset network settings with no joy, Reset all the phones settings also no joy. Ive rebooted the hub and none of it works. My ipad has connected to it not problem so doesnt make sense. Ive read that it could possibly be my phones wifi signal reciever may not be strong enough but on my handset it shows as full bars!!! Any ideas would be really appreciated.
ThanksI had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub. -
After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?
Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie -
my iphone 3 when turned on shows a picture of the jack and an arrow pointing to Itunes. I can't get it off this screen. help!
Do what you are being told. Plug the phone into a computer running iTunes and restore the phone.
-
Verizon iphone. how can i get to the home screen without activating it on a plan
how can i get to the home screen without activating it on a plan
Unless it is a 3rd party cord, there is no cord that just goes from the phone to the wall. However, you will need a cord that connects to the computer and the phone. The device is in recovery mode and you will need to restore it. See this support document for the instructions. http://support.apple.com/kb/HT1808
-
Can't get past the activation screen for iphone 3Gs
I am trying to activate the iphone 3Gs after switching from blackberry. When I turn the phone on, I get to the "welcome"screen, I choose my country and then given the option to activate through WiFi or iTunes. When I activate through WiFi, I get a message saying that the activation server is unavailable and to try again in a few minutes ( tried it again and was unsuccessful). I then attempt to activate through iTunes and receive a message saying that there is no SIM card in the phone (when there is). I am stuck here with a phone that is not working! I do not know what to do. I took it into Apple for them to check it out and they can't find the problem. Maybe someone has come across this issue and had it resolved? Please share!
Thanks!
MCHS0000You are asking in a thread that is 18 months old. Whatever.
Here are possible causes for that message:
1. Your antivirus is blocking access to gs.apple.com.
2. Your phone is jailbroken.
3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
4. Apple's activation servers are down (very rare, and never for more than an hour or so).
For 1. try disabling your antivirus.
For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.
Windows: c:\windows\system32\drivers\etc\hosts
Mac: /etc/hosts -
The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white, goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I'm having trouble viewing my account in iTunes, I'm signed in but can't get passed the next login window - any ideas?
carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.
Maybe you are looking for
-
What are the tables to be used in a material cost estimate report????
Hi.. i am creating a product costing report...(similar to ck11n n ck13n) it has two selection screen parameters( matnr and plant)... i need to display 1. cost center 2.total hours per cost center 3.total labor per cost center 4.total overhead per cos
-
Append rows to existing xls file
Hello Friends, I have a problem with gui_download. I am working on ECC6.0. I need to append some rows to existing xls file. I am using gui_download but it not working properly. I am giving append = 'X' also it is not appending rows it is overwriting
-
Creative sound blaster live va
<SPAN class=postbody>so i have a card installed on my pc. 4 speakers sub but when i play audio cds sound only came out of 2 speakers. i tried installing a newer version of the sound blaster softwares but was told to unistall the old ones. when i went
-
N80 new firmware v4.0707.0.7
code: 0527494 , u can check that. And, anyone has updated it? is it gd? does EAP-LEAP/PEAP work in that version?
-
I have Bridge 4.0. Search has suddenly stopped working. Whether I use quick search or Edit/Find, I can't bring anything up unless I type in the exact file and and extention. Saying that I want to search for a certain word that is in a certain folder