How do I add spaces with Yosemite?

I have just upgraded to Yosemite and my spaces went missing. I have two monitors and the current configuration for is one space for each monitor and one for Dashboard. I have "Zoomed to Mission Control" and do not see an option to add spaces, neither an "add" or a "+" anywhere.n How can I add more spaces?
Thank you,
Michael

Slide the cursor over to the top-right of the Mission Control window which should result in an Add button to appear.

Similar Messages

  • IF_IXML : How can i add encoding with value UTF-8 to the document object??

    Hi
    i want to create a xml file with the following content:
    <?xml version="1.0" encoding="UTF-8"?>
    <OpenSearchDescription xmlns="http://...."> 
    </OpenSearchDescription>
    i did this with the if_ixml interface and rendered the content in a file 'D:\usr\sap\IFD\DVEBMGS01\log\TEST_out.xml
    <?xml version="1.0"?>
    <OpenSearchDescription xmlns="http://...."> 
    </OpenSearchDescription>
    BUT the document attribut(?) encoding="UTF-8"?> is missing!
    How can i add encoding with value UTF-8 to the document object?? it should look like:
    <?xml version="1.0" encoding="UTF-8"?>
    *here is my coding.
    TYPE-POOLS: ixml.
    CLASS cl_ixml DEFINITION LOAD.
    DATA: lo_ixml           TYPE REF TO if_ixml,
          lo_streamfactory  TYPE REF TO if_ixml_stream_factory,
          lo_document       TYPE REF TO if_ixml_document,
          lo_parent         TYPE REF TO if_ixml_element,
          lo_ostream        TYPE REF TO if_ixml_ostream,
          lo_renderer       TYPE REF TO if_ixml_renderer,
         lv_rc           TYPE i.
    lo_ixml = cl_ixml=>create( ).
    lo_streamfactory = lo_ixml->create_stream_factory( ).
    lo_document = lo_ixml->create_document( ).
    lo_parent = lo_document->create_simple_element( name   = 'OpenSearchDescription'  "root node
                                                    parent = lo_document ).
    lo_parent->set_attribute_ns( name   =  'xmlns'
                                 value  = 'http://....' ).
    *rausrendern in file
    lo_ostream = lo_streamfactory->create_ostream_uri( system_id = 'D:\usr\sap\IFD\DVEBMGS01\log\TEST_out.xml' ).
    lo_renderer = lo_ixml->create_renderer( ostream  = lo_ostream
                                            document = lo_document ).
    lv_rc = lo_renderer->render( ).
    Thanks for help
    Britta

    Use the following code:
    set an document encoding
      l_encoding = l_ixml->create_encoding( character_set = 'UTF-8'
                                            byte_order = if_ixml_encoding=>co_none ).
      l_success  = l_ostream->set_encoding( encoding = l_encoding ).
    create a xml renderer
      l_renderer = l_ixml->create_renderer( document = l_doc ostream  = l_ostream ).

  • How can I add "Edit with Photoshop CS5" to the Edit With options?

    How can I add "Edit with Photoshop CS5" to the Edit With options?

    I think it has something to do with the order in which the PSE and PS are installed on your machine.
    For me, I can see option for editing in photoshop both in edit menu and from the action bar. I probably had Photoshop installed on my system before PSE

  • How do I add spaces in mission control in mountain lion?

    I use an external monitor on the right side of my mbp, the external monitor (when in use) is my main screen. I want my (auto retracting) dock on the right side of my right screen (the external one). The top right corner is my hot corner for mission control.
    With this setup, when I move my mouse to the right top corner I'll enter mission control, but somehow the "add a new space pop-up button" will not show up. I haven't tried this setup in Lion so I do not know if this is a bug for ML. I really like my dock on the right side of the screen, left is no option and I'm sick of having it at the bottom, but I do want to be able to add spaces, any thoughts how to do this?

    multiple ways,
    go to mission control and:
    hold option, a half of a desktop with a plus will appear, click it.
    drag an application's window next to the spaces there are already.
    put an app in fullsreen mode.
    move mouse over the top left side of the screen, and the desktop with the plus sign will appear to add a new space.

  • How do I add space when repling to an email so it's not so cramped?

    I just updated to the latest version of Thunderbird and now when I reply to an email, there is not enough space between my response and the former message. How do I add more space so I can see what I am typing more clearly? Right now it is cramped.
    Thank you

    I understand I can do it manually, but the old program automatically had space when replying so I'm looking to reconfigure the composition to accommodate this preference.
    Thank you.

  • How do I add contacts with IOS 6

    How do I add contacts to my iPhone 4S with IOS 6?

    My Utilities app only includes Clock, Calendar, Compass and Voice Memos.  I'm wondeing if this has something do with upgrading to IOS 6. I was looking for some way to manage contacts on the phone but it seems like they have to be managed on a desktop and synced from iCloud maybe? 

  • How t o add Link with a button in jsp

    hi,
    I want to add link with a button in jsp. How will i do it? Is there anyone who can help me? Please help me.
    With Regards
    Bina

    Try this,
    <input type='button' onclick='window.location="a.html"'>

  • Trouble in regaining a partition's space with Yosemite

    Hello everyone.
    I have just erased the partition I created for the Yosemite Beta, which had around 50GB of space. My issue here is that I don’t know how to regain that space back to the ‘main’ partition. How do I get my Macintosh HD to get the full 500GB again? Thanks in advance.
    Here’s the deal:

    You won't be able to delete the existing account in order to set up a new one without the password for the old account.  If your father doesn't remember the password, he can reset it as explained here: iCloud: Change your iCloud password.

  • HT201364 how do i add space for start up

    Hi do i add space or remove item on the start up disk

    Sorry, I don't understand.
    Are you trying to install Mavericks and it tells you there is  not enough disk space to install?
    If so, you need to look in your Documents, Pictures, Movies, etc and move any items you don't need onto an external device or delete them if you have no use for them ever again.
    Are you running 10.5.8 or 10.8.5?

  • How do I add space in Thinderbird?

    How do I increase space for Thunderbird, since my disk is almost 3/4 free? The system keeps telling me I cannot download new messages because it lack space

    The best approach is to use the Inbox as an Inbox for incoming messages and not as a general storage. Keep it low in email numbers and compact on a regular basis.
    Please do all the following in the order stated and report back on whether you can then download emails.
    '''1. '''Create folders and organise your emails by moving them into suitably named folders. eg: Family, Friends, Bills, Online Orders, Thunderbird etc.
    '''2.''' Delete any emails you do not want.
    '''3'''. Empty the 'Junk' and 'deleted/Trash' folder.
    * Right click on folder and select eg: 'Empty Junk'
    Also check the 'Sent' folder as this can also get quite large.
    Deleting anything you do not want to keep.
    '''4.''' Then, after doing all of the above, compact all folders to remove the hidden 'marked as deleted' emails.
    * File > Compact folders.
    '''5. '''Archive all older emails, say anything older than a couple of months.
    To do this, set up your Archive Options to store by monthly (If you send and receive several emails each day). Select to keep folder structure. Then Archive emails including the Sent folder.
    Info on 'Archive Options' here:
    * https://support.mozilla.org/en-US/kb/archived-messages
    This will reduce the size of your folders, organise emails and make it less risky.
    Additional good helpful info:
    * http://kb.mozillazine.org/Keep_it_working_-_Thunderbird
    * http://kb.mozillazine.org/Compacting_folders
    I use an addon to help me know how big folders are getting.
    * https://addons.mozilla.org/en-us/thunderbird/addon/extra-folder-columns/
    I have only the 'Size' column displayed, but it also offers Total emails (also useful) and Unread.

  • How do I add space between lines of text in the same cell on Numbers 3.0.1

    I just updated to Mavericks 10.9. In numbers, I used to be able to uncheck a box in the inspector that would make it so the Return key did not move to the next cell, but instead allowed me to add more space between lines of text in the same cell.
    How can I do this in the new version of numbers?

    HI ilb,
    Numbers 3 is a complete rewrite of the application. This preference option hasn't (yet) been included, but N3 is very much a 'work in progress. A word to Apple via Provide Numbers Feedback asking to have this option included in Numbers 3 might be a useful step. You'll find Provide Numbers Feedback in the Numbers menu in Numbers.
    Regards,
    Barry

  • How to design Storage Spaces with a large number of drives

    I am wondering how one might go about designing a storage space for a large number of drives. Specifically I've got 45 x 4TB drives. As i am not extremely familiar with storage spaces, i'm a bit confused as to how I should go about designing this. Here is
    how i would do it in hardware raid and i'd like to know how to best match this setup in Storage Spaces. I've been burned twice now by poorly designed storage spaces and i don't want to get burned again. I want to make sure if a drive fails, i'm able to properly
    replace it without SS tossing it's cookies. 
    In the hardware raid world, i would divide these 45 x 4TB drives into three separate 15 disk Raid 6's. (Thus losing 6 drives to parity) Each raid 6 would show up as a separate volume/drive to the parent
    OS. If any disk failed in any of the three raids, i would simply pull it out and put a new disk back in and the raid would rebuild itself. 
    Here is my best guess for storage spaces. I would create 3 separate storage pools each containing 15 disks. I would then create a separate
    Dual Parity Virtual Disk for each pool. (Also losing 6 drives to parity) Each virtual disk would appear as a separate volume/disk
    to the parent OS. Did i miss anything? 
    Additionally, is there any benefit to breaking up my 45 disks into 3 separate pools? Would it be better to create one giant pool with all 45 disks and then create 3 (or however many) virtual disks on top of that one pool? 

    I am wondering how one might go about designing a storage space for a large number of drives. Specifically I've got 45 x 4TB drives. As i am not extremely familiar with storage spaces, i'm a bit confused as to how I should go about designing this. Here is
    how i would do it in hardware raid and i'd like to know how to best match this setup in Storage Spaces. I've been burned twice now by poorly designed storage spaces and i don't want to get burned again. I want to make sure if a drive fails, i'm able to properly
    replace it without SS tossing it's cookies. 
    In the hardware raid world, i would divide these 45 x 4TB drives into three separate 15 disk Raid 6's. (Thus losing 6 drives to parity) Each raid 6 would show up as a separate volume/drive to the parent
    OS. If any disk failed in any of the three raids, i would simply pull it out and put a new disk back in and the raid would rebuild itself. 
    Here is my best guess for storage spaces. I would create 3 separate storage pools each containing 15 disks. I would then create a separate
    Dual Parity Virtual Disk for each pool. (Also losing 6 drives to parity) Each virtual disk would appear as a separate volume/disk
    to the parent OS. Did i miss anything? 
    Additionally, is there any benefit to breaking up my 45 disks into 3 separate pools? Would it be better to create one giant pool with all 45 disks and then create 3 (or however many) virtual disks on top of that one pool? 
    1) Try to avoid parity and esp. double parity RAIDs with a typical VM workload. It's dominated by small reads (OK) and small writes (not OK as whole parity stripe gets updated with any "ready-modify-write" sequence). As a result writes would be DOG slow.
    Another nasty parity RAID characteristic is very long rebuild times... It's pretty easy to get second (third with double parity) drive failure during re-build process and that would render the whole RAID set useless. Solution would be to use RAID10. Much safer,
    faster to work and rebuild compared to RAID5/6 but wastes half of raw capacity...
    2) Creating "islands" of storage is an extremely effective way of stealing IOPS away from your config. Typical modern RAID set would run out of IOPS long before running out of capacity so unless you're planning to have a file dump of an ice cold data or
    CCTV storage you'll absolutely need all IOPS from all spindles @ the same time. This again means One Big RAID10, OBR10.
    Hope this helped a bit :) Good luck!
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • How can I add subtitles with imovie?

    Can it be done? I'm trying to do something similar to closed captioning for a project I'm currently working on. It is a video I did in spanish, but need to add english subtitles. Any ideas?

    hey appleman,
    i noticed your reply here... it was helpful but i still don't get it. perhaps you could enlighten me?
    first of all, i had to use imovie hd (6.0.3) because imovie '08 wouldn't import my movie clip... i'm frankly baffled at how crippled and useless this newer version is.
    i managed to create subtitles one by one by splitting my movie with cmd-T, typing my title, dragging the slider and checking the preview until the title appeared for the right length of time, and clicking "add". this worked well but was extremely slow, so i looked for a more efficient way.
    then i read your post and tried following your advice. i split my entire movie into clips at the appropriate intervals for subtitles (using cmd-T).
    at this point i got stuck.
    first of all, i notice imovie allows adding multiple subtitles, but i couldn't find a way to sync them to my movie.
    i tried dragging the titles to the appropriate spots, between clips, but unfortunately, imovie fades these titles out before the clip ends!
    if i extend the title's duration by dragging the slider, imovie re-splits the movie to fit the length of the title!
    can imovie somehow be made to understand that the length of the clip is also the length i want the subtitle to be???
    also, what's the point of imovie's multiple subtitle feature? does it work? can i move from one subtitle to the next? how is this done?
    thanks a lot in advance!

  • How do I add files with same name to a folder

    I have photos with the same name and want to add all to the same folder.  I dont want to have to manually change the nams is there an easy way to do this.  In windows I would have the option to keep both and it would change the extn of one of the files.  Gary

    You have to do that manually, but why not set your camera to number photos sequentially?
    However, there is an App called A Better Finder Rename available from the App Store that can rename files.
    Or from here:
    http://www.publicspace.net/ABetterFinderRename/

  • How to remove white spaces with GUI_Download FM

    Hi Gurus,
    I need to download my text file using GUI_DOWNLOAD FM without leading white spaces, can u pls advice me.
    I am giving the code I am using below.
    CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
      BIN_FILESIZE                    =
            filename                        =  l_filename
        filetype                        = 'ASC'
      APPEND                          = ' '
         WRITE_FIELD_SEPARATOR           = 'X'
      HEADER                          = '00'
         TRUNC_TRAILING_BLANKS           = 'X'
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
      WK1_N_FORMAT                    = ' '
      WK1_N_SIZE                      = ' '
      WK1_T_FORMAT                    = ' '
      WK1_T_SIZE                      = ' '
      WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
      SHOW_TRANSFER_STATUS            = ABAP_TRUE
    IMPORTING
      FILELENGTH                      =
          TABLES
            data_tab                        = gt_temp
      FIELDNAMES                      =
       EXCEPTIONS
         FILE_WRITE_ERROR                = 1
         NO_BATCH                        = 2
         GUI_REFUSE_FILETRANSFER         = 3
         INVALID_TYPE                    = 4
         NO_AUTHORITY                    = 5
         UNKNOWN_ERROR                   = 6
         HEADER_NOT_ALLOWED              = 7
         SEPARATOR_NOT_ALLOWED           = 8
         FILESIZE_NOT_ALLOWED            = 9
         HEADER_TOO_LONG                 = 10
         DP_ERROR_CREATE                 = 11
         DP_ERROR_SEND                   = 12
         DP_ERROR_WRITE                  = 13
         UNKNOWN_DP_ERROR                = 14
         ACCESS_DENIED                   = 15
         DP_OUT_OF_MEMORY                = 16
         DISK_FULL                       = 17
         DP_TIMEOUT                      = 18
         FILE_NOT_FOUND                  = 19
         DATAPROVIDER_EXCEPTION          = 20
         CONTROL_FLUSH_ERROR             = 21
         OTHERS                          = 22
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

    hi , try this,
    REPORT  ZMP_SALES_HEDER_DOWLNLOAD.
    types:begin of ty_vbak,
          vbeln type vbeln,
          erdat type erdat,
          ernam type ernam,
          netwr type netwr_ak,
          vkorg type vkorg,
          kunnr type kunnr,
          end of ty_vbak.
    data:it_vbak type table of ty_vbak,
         wa_vbak type ty_vbak.
    select-options:s_vbeln for wa_vbak-vbeln.
    start-of-selection.
    select vbeln
            erdat
            ernam
            netwr
            vkorg
            kunnr from vbak
            into table it_vbak
            where vbeln in s_vbeln.
       CALL FUNCTION 'GUI_DOWNLOAD'
         EXPORTING
    *      BIN_FILESIZE                    =
           FILENAME                        = 'C:/temp.XLS'
    *      FILETYPE                        = 'ASC'
    *      APPEND                          = ' '
          WRITE_FIELD_SEPARATOR           = 'X'
    *      HEADER                          = '00'
    *      TRUNC_TRAILING_BLANKS           = ' '
    *      WRITE_LF                        = 'X'
    *      COL_SELECT                      = ' '
    *      COL_SELECT_MASK                 = ' '
    *      DAT_MODE                        = ' '
    *      CONFIRM_OVERWRITE               = ' '
    *      NO_AUTH_CHECK                   = ' '
    *      CODEPAGE                        = ' '
    *      IGNORE_CERR                     = ABAP_TRUE
    *      REPLACEMENT                     = '#'
    *      WRITE_BOM                       = ' '
    *      TRUNC_TRAILING_BLANKS_EOL       = 'X'
    *      WK1_N_FORMAT                    = ' '
    *      WK1_N_SIZE                      = ' '
    *      WK1_T_FORMAT                    = ' '
    *      WK1_T_SIZE                      = ' '
    *    IMPORTING
    *      FILELENGTH                      =
         TABLES
           DATA_TAB                        = IT_VBAK
    *      FIELDNAMES                      =
    *    EXCEPTIONS
    *      FILE_WRITE_ERROR                = 1
    *      NO_BATCH                        = 2
    *      GUI_REFUSE_FILETRANSFER         = 3
    *      INVALID_TYPE                    = 4
    *      NO_AUTHORITY                    = 5
    *      UNKNOWN_ERROR                   = 6
    *      HEADER_NOT_ALLOWED              = 7
    *      SEPARATOR_NOT_ALLOWED           = 8
    *      FILESIZE_NOT_ALLOWED            = 9
    *      HEADER_TOO_LONG                 = 10
    *      DP_ERROR_CREATE                 = 11
    *      DP_ERROR_SEND                   = 12
    *      DP_ERROR_WRITE                  = 13
    *      UNKNOWN_DP_ERROR                = 14
    *      ACCESS_DENIED                   = 15
    *      DP_OUT_OF_MEMORY                = 16
    *      DISK_FULL                       = 17
    *      DP_TIMEOUT                      = 18
    *      FILE_NOT_FOUND                  = 19
    *      DATAPROVIDER_EXCEPTION          = 20
    *      CONTROL_FLUSH_ERROR             = 21
    *      OTHERS                          = 22
       IF SY-SUBRC = 0.
       MESSAGE 'DATA ULOADED TO temp FILE' TYPE 'I'.
       ENDIF.

Maybe you are looking for