How do i auto load "dhcpcd eth1"?

i have network card in my pc, but i use usb modem for internet. i add eth1="dhcp" in rc.conf, every time i need to type in terminal "dhcpcd eth1" then i can get work my internet. is that edit anything can skip that step?

praxis wrote:
you should have something along the lines of this:
lo="lo 127.0.0.1"
eth1="dhcp"
INTERFACES="lo eth1"
Hrmm... no that's not quite it either... There's no need for 'lo' so you can ditch that along with the lo="blah" statement.  Also, the INTERFACES is an array declaration, so it should look like this:
eth0="dhcp"
INTERFACES=(eth0)

Similar Messages

  • How can I auto load Safari thru a non-Admin user account

    Okay, maybe I don't want to do this - - but can I?
    I have my old iMac setup to turn on at 8am. I would like to access it remotely through LogMeIn.com. But I need Safari running for remote access.
    I'd prefer to have Safari running in a 'Guest' User Account with no Admin rights (then from LogMeIn.com, switch to my user account and I can enter my password manually).
    I know how to auto login to a Guest account, but how do I have that account auto start Safari? Only Administrators can have programs start automatically, right?
    I don't want to auto-login (with password if that's even possible) to my main Administrator account.
    Any suggestions?
    Thanks in advance

    I use iKey to remap the keys. It has a little more function then youpi key. For many years, I used youpi key before switching to iKey.
    In addition, ikey will allow you to run ikey applications when ikey starts.
    !http://farm3.static.flickr.com/2700/4178949301_cea8fa07a2.jpg!
    You might like iKey/youpi key. I have my frequently used applications set to f keys. The same f key starts an application and switches to the application.
    Youpi key is free. It works fairly well for me in MAC OS 10.4 although not officially supported. There is a commercial version you can buy, called iKey.
    http://www.versiontracker.com/dyn/moreinfo/macosx/11485&vid=75326
    I have the common programs that I use assigned to function keys. I have F4 assigned to Firefox. When I want to start FireFox, I press F4. When I want to switch to firefox, I press F4! Starting & switching to an application in Mac OS are the same thing in Mac OS.
    Here is an example of to assign volumn control to a function key.
    http://discussions.apple.com/message.jspa?messageID=10361085#10361085
    Here is a solution with XTool. XTool Uses exact screen addresses. So a movement of an icon will cause you trouble.
    do shell script "/usr/sbin/system_profiler SPDisplaysDataType | grep 'Resolution'" -- get info
    tell the result to set {DisplayWidth, DisplayHeight} to {word 2, word 4} -- get resolution
    --move mouse {DisplayWidth div 2, DisplayHeight div 2} -- center mouse
    move mouse {670, 13} --sound
    click mouse
    move mouse {673, 96} --sound level
    click mouse
    move mouse {555, 282} -- center mouse
    click mouse
       First, there is the XTools scripting addition, which will give AppleScript the ability to move the mouse. 
       http://www.lestang.org/osax/XTool/
       XTool-2.0-src.dmg.tgz 
       Installation :
       Drag
    .osax from insite the image to one of the following locations (create the directory if it does not exist) :
     a : ~/Library/ScriptingAdditions/
       b : /Library/ScriptingAdditions/
       c : /System/Library/ScriptingAdditions/
       I have it in directory /System/Library/ScriptingAdditions/ 
       My other two directories do not exit: ~/Library/ScriptingAdditions/ & 
          /Library/ScriptingAdditions/
    .    Next, you will need to place a script application into your login items (System Preferences > Accounts > Login Items) that will move the mouse when you log in:

  • ODI: How determine if auto load is complete and all data has gone through

    Hi All,
    I am currently executing the below scenario and following http://docs.oracle.com/cd/E26070_11/otn/pdf/integration/E26075_01.pdf for the same.
    SRC: AGILE
    TRG: OBIEE
    As per the above i get out of the box packages which are used and executed , since this is something which comes out of the box how to determine whether my data load is complete and data has gone through from SRC->ODM->TRG?
    My Operator and sessesion show success and secondly i don see any errors in logs as well .
    Any help ? Anybody already experienced above scenario please help .
    Cheers,
    Mak

    So who do I believe?
    Blog:  http://www.jamoroki.com
    James King
    about.me/jamoroki
      <http://about.me/jamoroki>

  • I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

    I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

    garysm99 wrote:
    Not familiar with structure view. How do I go there?
    click in IDVD on this button

  • How do I stop last web pages from auto loading in Safari?

    I find the feature of Lion that auto-loads previous web pages (and previous open applications) annoying. I want to stop this function. I see the checked box that asks if I want to re-open applications when logging out but I want the default to be to NOT re-open the apps. I equally dislike the auto-opening of previous web pages in Safari. I know that I can clear my history but what I want is for my homepage to open when I run Safari and not the last page viewed. Any solutions?
    Found this for Safari in the forums...
    Go to terminal and type in the following:
    defaults write com.apple.Safari ApplePersistenceIgnoreState YES
    If you decide that you rather have the new resume behavior, execute the above commands but change YES to NO.
    You can also do the same for Preview:
    defaults write com.apple.Preview ApplePersistenceIgnoreState YES

    iDrifter: The full command is:
    defaults write com.apple.Preview ApplePersistenceIgnoreState YES
    I was having the same problem and this is what I did:
    1) Closed Safari
    2) Changed the setting (mentioned) above in System Preferences
    3) Enter the "defaults write ..." command into Terminal.
    Now whever I launch Safari it does not load any pages.
    HTH,
    RJ

  • How come a season pass tv show, purchased on my iPad, auto load on my iMac, but cannot load on the iPad?

    Hi,
    I bought Whale Wars on my iPad. I bought a season pass sd version. It no longer appears on my iPad. It auto loads on my iMac. I cannot sync it from my iMac to my iPad. I can view it on my iPad only by sharing with my iMac. but there is a sync of a different year of this show even though I did not set it to sync. Maybe it was guilty.
    I also bought Ice Road Truckers on my iPad. It downloads after authentication to my iPad, but it is displaying two separate IRT icons.
    Flying Wild Alaska does the same with two separate icons.
    The crab fishing show, Dangerous Catch appears under four separate and equal icons.
    This is getting frustrated.
    I have restored the iPad. No change. I restored the iPad as a new iPad and the tv show problem persisted. I restored it back.
    Any ideas out there.

    Hi,
    It is me again. A week has gone by. I got an email saying Whale Wars was ready for download. Click here. Did that. The process asked for my password three times. It then showed it would download Whale Wars and then Flying Wild Alaska to my iPad.
    It took the right amount of time to load to my iPad and then it started to load Flying Wild Alaska. But where did it put it?
    Under videos there was no icon for Whale Wars. There were four icons for the Deadliest Catch, two icons for Ice Road Truckers, two icons for Flying Wild Alaska, and one icon for Mountain.
    I went to the shared menu. There was no icon Whale Wars Season 5. In place was an Ice Road Trucker Icon that had Whale Wars Season 5 but not the latest show.
    Flying Wild Alaska did load on the iPad and it played.
    So I synced the iPad. With a number of spinning circles of death which iTunes solved all but the last one it kind of synced but it did not synch the latest show of Whale Wars. I had to force close iTunes and resynch. This time it synced the show. Now the show is on my iPad but no icon and I cannot see it. The show is on my iMac but it will not let me synch it back to my iPad. I can view the show under a shared selection on my iPad but if I walk out of wifi range forget it.
    Any ideas out there?
    Thank you,
    John Ross
    Ps:  Screen shots, iMac, and iPad available on request.

  • Auto loading of username and password are taking place on one site and only one site and I do not want this to happen but can"t get it to stop.

    As my question states I don't want auto loading on any site and it only happens on this one site. I have went thru tools and options and there are no sites listed for auto loading. There are no saved passwords. If I go to the site using Internet explorer the problem does not occur.

    Ok, no problem i found this help articles:
    https://support.mozilla.org/en-US/kb/how-clear-firefox-cache
    http://www.youtube.com/watch?v=OukBlXfOP8Y

  • PDFmaker addin will not auto-load to Word

    Using Office 2013 and Acrobat Pro 11.0.08. Until this week, the PDFmaker add-In was always enabled in Word. Then there was an error doing a merge to PDF.
    Now every time I start Word, PDFmaker shows as inactive ("load behavior: unloaded") until I go to File | Options | Add-Ins and check the box to load it. Then it works fine until I close Word and have to do it again.
    How do I get it to auto-load?? I can't find a place to set that.

    You can solve this problem by editing the "LoadBehavior" registry entry.  The value needs to be 3 (load at startup).
    With Office 2013, that registry key is at
    HKEY_CURRENT_USER\Software\Microsoft\Office\Word\Addins\PDFMaker.OfficeAddin
    One note - the Add-In was loading when I ran as the administrator but not when I just opened a Word doc.  I checked this same registry key under HKEY_LOCAL_MACHINE and it was set to 3.  I am guessing that is why it worked when run as administrator.  For some reason the LoadBehavior key had been revised to 0 on my HKEY_CURRENT_USER registry key.
    Nevertheless, the fix above will work because I just tried it out on my machine and another here in the office which had the same issue.

  • Stop auto load of account information on Skype new...

    How do I stop my info from auto loading on a skype reinstall[ New ]
    Options 
    2 minutes ago
    I am selling my laptop -
    I have installed Skype and installed it fresh.
    Unfortunately every time I go thru the process, the re-installed Skype also includes my account and all my contacts.  
    How in the heck can I stop this from happening??????
    HELP!!!

    http://community.skype.com/t5/Subscriptions/How-do-I-stop-my-info-from-auto-loading-on-a-skype-reins...

  • TMW: auto loading employee list in time data screen

    Hi all,
    Within TMW one can have an employee list.  I'd like to get the employee selection auto loaded in the time data subscreen.  Without double clicking on the employee selection or using the button "copy selected records".
    Anyone have an idea how to do this?
    Please help!
    Kr,
    Jonathan

    Sakira,
    Thanks for the feedback.  I don't think i was clear enough, sorry.
    The problem i have is in the Time Manager Workplace.  There a user gets an employee selection (we are using the multiple persons view btw).  If the user wants to register absences for his/her crew he still needs to transfer his crew members to the time data screen.
    Standard only the first person of his crew is transfered.  It would be really helpfull if his complete crew was transfered automatically.  So he starts TMW and can immediately start registering absences for his crew.
    BTW thanks for the quick response!
    Kr,
    Jonathan

  • Auto load archassistant with sudo permission

    I want to auto load archassistant after startup as a superuser in my kdemod4 laptop.
    Could someone tell me how to achieve it?
    Thanks

    rc.local won't work because that's boot time and archassistant needs X.
    what you do is run
    sudo visudo
    which will open a vim session. Hit 'i'
    Add this to the bottom:
    your_user_name_here ALL=(ALL) NOPASSWD: /usr/bin/archassistant
    Hit 'ESC' once
    Hold 'Shift' and press 'Z' twice to save your changes
    Then add "sudo archassistant" in your KDE4 control panel to startup applications. It may be under "Sessions" or something. I don't have KDE4 so I can't tell you exactly.

  • Module 'asus-nb-wmi' stopped being auto-loaded after kernel update

    Well, the module 'asus-nb-wmi' which takes care of some FN keys and keyboard backlight stopped being auto-loaded after the latest kernel udpate (3.9.3), so I had to add it to /etc/modules-load.d/ to get it working. This has happened before, between kernel updates and I had to re-install arch to fix it, but now I found that manually adding the module is a nice solution, but I want it to be loaded automatically or at least know why does this happen. Kernel modules, such as this one, should be loaded automatically right?
    Best regards.
    Last edited by DanielRS (2013-07-04 19:54:48)

    I think there is a valid question here;  Same thing happened to me.
    Upon a default install of arch, the module was auto-loaded without the user touching any configuration files
    at some point during kernel updates, the module is no longer auto-loaded
    the user then has to find out what is happening and go add the module to the appropriate config file to force load on boot.
    So the larger question is; without config files being taken into consideration, how does the kernel decide what modules to load?  f
    I know it has something to do with the hardware that it detects, but am unaware if this is something within the RC or systemctl booting system, or if this is part of the kernel.
    I'm going to dig around some more on the internet, as i'm sure the answer is out there somewhere.. but if someone that is on this forum happens to read and know the answer, it would be nice to know
    thanks

  • Is there auto load balance  between 2 active webi services?

    Hi ,
    I have not seen any kind documentation from SAP whether BOBJ can auto load balance requests in round robin fashion between 2 or more webi services.
    The only theory or belief that i see & hear is that upon reaching the max connection threshold  of one webi service, bobj will start diverting the next requests to second webi service.
    So now i am looking for some kind of clarification on whether auto load balance happens between multiple webi services in round robin fashion or not.
    Please share if any one has idea about this.
    Thanks,
    Srikar

    Thanks to everyone who tried to respond to my question.
    But i just got below response from SAP:
    =====================================================
    I would like to inform you that CMS distributes the load (jobs) to
    servers according to the server availability (maximum jobs allocated
    to individual server). This is a generally how load is balanced
    between CMS and various job servers and processing servers.
    =====================================================
    Now i am more confused. I personally did some little testing by creating 2 webi services and tried to view multiple webi reports. What i observed is  it does pick up different webi services only while at the start of report viewing. But once it picks up perticualr webi service, that same user session is sticking to previously picked up webi service and always  goes to the same process for processing.
    But now SAP response is bit more confusing.
    Thanks,
    Srikar

  • NWTAPE.CDM auto-load question

    I have a NetWare 6.5 SP7 server and I am trying the Yosemite Backup software to work with Tangberg_LTO-4 HH tape drive.
    When I load the adpu320.ham driver, I got error: Device TANGBERG_LTO_4 HH has not been tested with this driver. Driver will attempt generic support. Use at your own risk!!
    Then when I tried to do a restore from the Yosemite Backup program, the server abended and I have to cold boot the server.
    I then noticed if I unload NWTAPE before I load Yosemite Backup, it seems to do backup and restore fine. I saw some people have issue with NTAPE after SP7 and the Yosemite backup software is only certified to run on NW6.5SP5. I am checking with their technical support to confirm if I really need to have the NWTAPE loaded for their backup program to run.
    My question how I can stop NWTAPE from auto-load, do I just rename the NWTAPE.* from the C:\NWSERVER\driver folder?
    Secondly, why do I need to load NWTAPE? I saw some posts for Arcserve that NWTAPE has to been unloaded before loading Arcserver.
    Hope someone can help.
    Thanks
    Che

    Hi,
    cche wrote:
    > I am checking with their technical support to confirm
    > if I really need to have the NWTAPE loaded for their backup program to
    > run.
    No. The opposite is true. You have to unload it (or not even load it in
    the first place), and that has always been the case.
    > My question how I can stop NWTAPE from auto-load, do I just rename the
    > NWTAPE.* from the C:\NWSERVER\driver folder?
    Either that, or you can add "set auto load of cdm modules=off" into your
    startup.ncf.
    > Secondly, why do I need to load NWTAPE?
    Above said, you don't.
    > I saw some posts for Arcserve
    > that NWTAPE has to been unloaded before loading Arcserver.
    Nwtape has to be unloaded or not loaded with every backup software that
    doesn't use it, that isn't specific to Arcserve at all. The only two
    products that utilize nwtape are Novells own sbackup, and Syncsort
    Backup Express.
    CU,
    Massimo Rosen
    Novell Product Support Forum Sysop
    No emails please!
    http://www.cfc-it.de

  • How to View the Loaded Data

    Hi,
    I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
    Thanks

    Hi Madhu,
    You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
    Regards
    Hemant

Maybe you are looking for