How do I branch based on validation success or failure?

I am on an edit record page. I want to be able to branch based on clicking on the submit button and whether all of my validations pass (branch to different page) or a single validation fails (return to edit page with error message). I know how to set the validation failure message.
Is there some APEX status field I can query? Or do I have to write every validation as PLSQL and not use any of the built-in validation conditions?
Thanks,
Neal

You can use apex_application.g_inline_validation_error_cnt, but it's undocumented and subject to change
Apex 4.1 wwv_flow.g_inline_validation_error_cnt initialization error

Similar Messages

  • How to stop message processing based on validation?

    Hello experts,
    I have a requirement to stop message processing in the graphical mapping based on validation results. Here is the scenario - messages are translated using graphical mapping and sent to the target system. An RFC lookup will be done to ECC to determine if the data in the message is good. If the lookup returns a negative result, message processing should be stopped right there.
    I guess we can throw an exception from the mapping to force a failure and stop further processing, but that will cause the message to show up as failed on SXMB_MONI and cause alert emails to be sent out in PROD. Another option will be to supress creation of the root node itself, but I think the message will then fail in the subsequent "call adapter" step if the target schema has a min occurence of 1 for the root node (as in the case of IDocs).
    Is it possible to do it without using BPM?
    Thanks,
    Michelle

    Hi Michelle,
       If your requirement, to stop message processing without sending an alert?
    If yes, then you can have a alert rule, not to trigger alerts on a failure (And to raise an exception based on the result from RFC loookup).
    If your requirement is not to make the message fail, then you have to go for the ccBPM route.
    Best Regards,
    Ravikanth Talagana

  • Re: How I would make the Toshiba AC100 successful

    Hi All,
    I post my ideas for improvements here, maybe someone from Toshiba reads this.
    The original blog post is here:
    http://soltesza.wordpress.com/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/
    Please feel free to contribute here or at the blog post.
    The AC100 is an early attempt from Toshiba to create an ARM based netbook (a smartbook) with Nvidia's successful Tegra2 chipset.
    Although, the AC100 looks like proper hardware design, it became only
    mildly successful. Some of the reasons may have to do with the primary
    operating system, Android ([see my earlier article about this|http://soltesza.wordpress.com/2010/06/27/toshiba-a100-smartbook-with-android-but-why/]) but even more can be attributed to the design decisions Toshiba made.
    Since these machines are now available in my home country (Hungary)
    at quite attractive price points (~$250 USD, some people seem to be
    trying to get rid of it soon after purchase) I can't help bumping into
    it all the time. Sinc[View post|http://soltesza.wordpress.com/2011/05/09/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/]e
    I am a gadget fan, I always have my hand trembling seeing those prices
    and I need to cool myself down before doing some impulse-buy I regret
    later.
    What could make me click on the "Buy" button?
    *More memory*
    First of all, 1-2GB of RAM instead of the measly 512MB the AC100
    hosts. Why the heck tried Toshiba sell a netbook with 512MB of RAM when
    ALL of the Atom N450 netbooks seemed to come with 2 GB at that time?
    This amount of RAM would allow to slap Ubuntu onto the machine and not
    worry about running out of memory when loading up OpenOffice. Ubuntu has
    been demonstrated on the AC100 and even looks snappy. (see this [site dedicated to Ubuntu on the AC100|http://tosh-ac100.wetpaint.com/]). Toshiba could easily put 2GB of RAM into the machine without major cost-increase.
    *Desktop OS and/or Android*
    Putting 1-2GB of RAM into the AC100 would open the gate for using a
    proper, netbook-oriented desktop OS which can take advantage of the
    form-factor. They should use Ubuntu, since that could be fixed up on
    this hardware in no time (especially if they purchase some consultancy
    from Canonical).
    I don't think that Android needs to stay on the machine but if
    Toshiba still thinks it is such a good idea for any user-group, they
    could make the AC100 dual-boot, or even better, run both OSes in
    parallel (2GB of RAM would make this absolutely possible). Android would
    be the light-and-easy OS on the device but the user could any time
    switch to a full Ubuntu desktop with an Android launcher icon and start
    using OpenOffice or other decent desktop software. The
    paravirtualization developed by B-labs would be an [instant solution |http://armdevices.net/2011/04/04/android-virtualization-on-ti-omap4-processors-dual-core-cortex-a9/]for this problem and would future proof the machine for a possible Windows8 scenario later.
    *More battery*
    The 8 hour runtime of the AC100 is decent enough but more
    battery-time is always welcome. The enclosure has a LOT of free/empty
    space under the keyboard due to the ultra-compact nature of Tegra2 and
    its supporting circuitry. Toshiba should again take advantage of the
    form-factor and add one or more extra battery docking bays under the
    keyboard which could extend the runtime to 16-24 hours. (Admittedly,
    they would make the unit weight much more but since these batteries
    would be optional, this decision would be up to the user. A 24-hour
    runtime with a 3-battery arrangement would make the AC100 extremely
    appealing for a large-set of users. It would be acceptable that the
    batteries are charged in series (so the recharge process is lengthier)
    so that Toshiba doesn't have to switch to a more expensive power supply.
    (Although the power supply issue is probably not a serious cost
    factor).
    *What else*
    Of course, there would be a lot of things to be improved (more USB
    ports, higher-resolution display...etc) but I tried to draw up things
    which require smaller redesign so that an improved version could be
    implemented faster.
    I believe the AC100 line could be made really successful and Toshiba should take steps to make this happen.

    hi there,
    I'm new here and I need support from someone...
    I buy notebook toshiba ac100 3 weeks before and I suffer major problem...
    something happened with my screen , I press the power button and notebook is running /I can tell from turning on play-multimedia button for music and it plays music/ but the screen is not running !
    I try many many things, like only on A/C , only on battery , pushing button for switch between screen and ext.monitor , but unfortunately - the screen was still black !
    so I connect to flat tv with HDMI cable, and there you go - i have the screen ot the TV , but only there !
    my question is this is problem with the screen or something I do wrong ?!
    thank you in advance.
    regards.

  • Create Branch Based on Parameter

    Hi:
    I need to create a workflow process that branches based on a parameter value passed into the process. Can anyone suggest how I can do this? Basically I want to call different notifications based on the in-coming parameter.
    Thanks!

    A workflow diagram can branch based on the value returned by a completed activity. One possibility would be to create a function activity that queries the appropriate parameter and returns a corresponding result. Then you can define different outgoing transitions from that function activity for the different possible result values.
    See: Transitions, Oracle Workflow Developer's Guide
    http://download-west.oracle.com/docs/cd/B14099_04/integrate.1012/b12161/dfproc01.htm#proctrans

  • Registration Parameters Cannot be Validated Successfully

    Hello all,
    Ran into what might be a simple problem: Jsut installed Essbase V9 and trying to configure EAS and Essbase Server. I entered the user name and pw for the user account as well as shared services and I get the error "Registration Parameters Cannot be Validated Successfully, Please Verify If the Information is correct". Any ideas why this error ?

    Hi,
    1. It should not matter , whether its foreground or background ( but its a different question ,why your services are not able to start at background).
    2. As Atul said, ensure your shared services is up and running ( its pre requisite is openLDAP).
    3.As you have error while configuring with SS , it point out that your SS was down ,while you were configuring.
    Pls do validate , to see what the log in red says
    4. Finally, how to run the services?. To answer that, generally they are 'automatic' in nature and they get started withe OS start( IF you have an issue ,better to start it in the foreground , identify the problem, resolve and start in the background)
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • How to know the balance and validity of internet data in iPad

    How to know the balance and validity of internet data in iPad?

    Sir I m using internet in ipad4 with airtel network
    They provide me 2gb data with the amount of 255 rupees
    And now I inserted the sim in my ipad4
    And start the surfing on safari n all
    And now I wanted to know how much data is balance.

  • How to block calls based ANI for individual user?

    I want to know how to block calls based on ANI for individual user in CUCM?  Lets say if the individual wants to block calls from certain number.
    Malicious call id - softkey will not work for our purpose.
    calls come to cucm via mgcp gateway.  cucm 9.x
    thanks,

    How to block calls has been asked hundreds, and hundreds of times at CSC, a simple search would have provided you with all the necesarry information. Please search before you ask
    https://supportforums.cisco.com/docs/DOC-19628
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • How Redirect browser(client) based on non-negotiable SSL/TLS protocol or cipher

    Hi guys,
    we have a security requirement wherein we have to  force the browsers accessing our asp.net application hosted on windows server 2012 to have atleast tsl 1.1 , but we don't want to simply block the request, instead we would like to redirect the request
    to a unsecured static html page with the instructions on how to get them onto tsl.
    can any one help me here?>? actually i found a similar and exactly same thread on stackoverflow but i think that is probably directed towards linux family.   http://serverfault.com/questions/591188/redirect-browser-based-on-non-negotiable-ssl-tls-protocol-or-cipher
    please help me guys..
    ps: i have posted the same question on IIS forum (http://forums.iis.net/t/1223352.aspx?How+Redirect+browser+client+based+on+non+negotiable+SSL+TLS+protocol+or+cipher+from+IIS)
    and got a reply saying that it can be done at windows kernel level(possibly).

    Hi,
    As far as I know, once SSL handshake fails, no subsequent communication would occur between the server and client.
    Therefore, as the way I see it, the goal cannot be achieved.
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • CFM /TR - how system calculate amount based on rate FX 60A

    Hi all,
    i need to know how system calculates amount based on rate entered upon creating a contract (t-code TX01).
    steps input:-
    1. header - comp code, product type, trans type
    2. partner
    3. purchase curr & amount (eg. IDR 8,345,545,500)
    4. sale currency only (amount system will auto calculate) USD
    5. rate field = 11.553
    6. spot rate will auto pick up from rate
    7. value date
    8. contract date
    upon TBB1 no error. posting log as follows:-
    FX1000+ : 40 8,345,545,500 IDR bank GL acc
                    50 8,345,545,500 IDR clearing acc
    FX2000- : 40 722370.42 USD clearing acc
                   50 722370.42 USD bank GL acc
    but upon TPM18 error occurred as follows:
    DBT_C009 - GL not maintain in acc symbol 5.3.4
    DBT_E039 - no posting spec assigned to update type
    DBT_B018 : 40 0 USD, 431,977,511 IDR gain/loss
                       50 0 USD, 431,977,511 IDR clearing acc
    so, after maintained DBT_C009 as follows still error for DBT_E039:
    40  0 USD, 38 IDR clearing acc
    50  0 USD, 38 IDR P&L gl acc
    what i don't understand is how system calculate and get DBT_C009 & DBTE039.
    what is the function of TPM18?
    thanks.

    Hello Prarnod,
    I have done the first node only for actuals that come from the integration to the internal order.
    I have tried setting up 2 and 3 even though the 3rd one does not make any sense to me
    Thanks,
    Paul

  • How to create Formula based value field in COPA

    Hi,
    I want to know how to create formula based  value field in COPA
    My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
    factor.
    anybody give some light on the same topic or requirement ?
    Thanks
    Nilesh R

    The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
    In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
    Now click the "check formuar"-button. Then save.
    Before you can use the key figure in assessment, execute TC KEUG.
    Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
    I hope this made it clearer.
    Regards
    Nikolas

  • How To Force User to Fulfill validations in view before switch to another view in infopath 2012

    i have a form with different views
    ,, every view has some validations ,, how to validate each view's validations before switching to another view
    if manual how to do that ?

    Hi Ahmed,
    You can use custom validation for verifying all the fields with required data, and write rule in you submit button to disable till all the fields are entered with valid data. Enabling submit or switch view rule after validation will help you on this regards.
    You can also use internal flags for enabling disabling submit button if required, or just make all the fields required OOTB.,
    I usuall use expressions to validate the form for values, this will help to check multiple fields atonce.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/39160c15-2074-4f27-b9bc-5b0a20d2d29e/validate-30-fields-on-infopath-form-before-swiching-view-or-submit-form-data
    here are some links for reference,
    http://office.microsoft.com/en-us/infopath-help/introduction-to-rules-HA010381865.aspx
    http://office.microsoft.com/en-us/infopath-help/add-rules-for-validation-HA101783369.aspx
    http://sharepoint-mattharmon.blogspot.com/2013/03/conditional-validation-rules-infopath.html
    http://www.bizsupportonline.net/infopath2007/infopath-basics-3-ways-validate-data-infopath.htm
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • How to check the Success or Failure of a command

    Hi,
    I have forms 10g in which I made delete button on a tabuler canvas behind the button I wrote DELETE_RECORD buil-In, I want to know how can I make sure the delete process is successful or fail.
    Thanks in advance.
    Khawar

    Hi Francois,
    I will check detail in Help for Form Success and Failure, Thanks for reply.
    Khawar

  • I am planning to take unlocked  iphone5 which is from USA, let me to know how to check the phone is valid ?

    i am planning to take unlocked  iphone5 which is from USA, let me to know how to check the phone is valid ?.How can i check is that properly unlocked, stolen and service.

    IF you can actually yet purchase an unlocked iPhone4 8GB from the US Retail stores is not clear
    They are certainly available from Apple.com but only if you have a US credit card and a US delivery address
    I suspect you do not fit this requirement
    You also have to be careful as the Apple Retail stores sell no contract iPhones these are NOT unlocked
    However if you are able to purchase an unlocked iPhone4 8GB then it will certainly work with the Approved carriers in India

  • How to ... implement characteristic validation forbidden infocube update?

    Hi Gurus,
    I need implement into SEM-BPS a validation so that the update of certain combination of characteristic be forbidden.
    I build up and exit function.It gives an error message when this combination of characteristic be done, but then if the user push save button the information is update into the infocube.
    Someone can help me? how to ...implement this validation forbidden the update into the infocube?
    Thanks in advance for your help.

    Hi,
    I'm using the web Interface. In order to execute the planning function when the save button is pressed I implement the follow how to:
    <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e032e790-0201-0010-8bae-f9bc2b1e5aaa">How To... Run Planning Sequences on Save and other events (web)</a>
    On the other side the message given back for the planning function is an error message.
    Even though I can save data into the infoprovider.
    Since you confirm to me that the standard behavior is the wished one, I'm going to continue by this way in order to obtain the desired result.
    Thanks a lot.

  • How to check my route exam validity?

    i had taken my route exam few days back but its not showing in certification tracking system.
    can cany one tell me how to track my route exam validity.

    Give it a couple of days to get loaded into the system. It will be there within the week and then you'll see your information.

Maybe you are looking for