How do I center a table on the page in Pages?

MSL,
The answer depends on whether your table is Inline or Floating.
If Inline, the Wrap Inspector gives your three options: Left, Center, or Right justified. See the icons on the right, below the Wrap checkbox.
If Floating, and if you have the alignment guides selected in Pages Preferences, just drag the table until the blue guideline appears in the center of the document and drop the table there.
Jerry

Similar Messages

How do I center a table on the page?

I have rotated a table 90 degrees counter clockwise, now I would like to center it on the page. How do I do that?

You can try using the Object edit tool. The steps you are taking or normally done in the creation application, not in Acrobat that does not do such activities well.

How to add an Attachments Table on the Page of a Single Row Region

Dear All,
Please help me with a tutorial or anything that help me adding a an Attachments Table on the Page of a Single Row Region.
I took a look at the attachment in ch4 in the developer guide but it is not explained clearly how to implement it.
Thanks,
Mahmoud Assem
Message was edited by:
Mahmoud Assem

If you follow the dev guide properly, there shouldn't be any issue. Let us know where exactly you are facing the issue.
--Shiv

How to create a temp table in the memory, not in disk?

in sql server, you can create a temp table in the memory instead of disk,
then you can do the insert, delete,update and select on it.
after finishing, just release it.
in Oracle,
I am wonderfing how to create a temp table in the memory, not in disk?
thanks,

Thanks for rectifying me Howard.
I just read your full article on this too and its very well explained here:
http://www.dizwell.com/prod/node/357
Few lines from your article
It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they donâ€™t swamp themselves, and start causing each other to age out back to disk.
Thanks and Regards

How to center a component on the page????

Hi all
i want to center a component on the page
Sorry it may be some thing trivial ???
but i ve a command button i want to center it on the page ????
how???

Hi,
try this steps:
1-surround the command button with panelGroupLayout with layout Horizontal.
2-In panelGroupLayout property select Style tab.
3-in the Text tab set horizontal Align with Center.
4-in Box tab set width with 100 Percent
if panelGroupLayout inside any other component make this palce width 100 percent and its Align Horizontal with Center.
Sameh Nassar

How to create a dynamic table were the JTable columns keep varying

How to create a dynamic table were the JTable columns keep varying based on the input to the jtable

Oooh, I lied. DefaultTableModel has an API for adding and
removing columns. I didn't know that. You should have read
the API.
As for preferring to extend AbstractTableModel rather than
DefaultTableModel, I think it's more correct. DefaultTableModel
is a simple implementation of Abstract for basic cases. It isn't
intended to be extended. I figure most people extending
DefaultTableModel are also extending JFrame, JPanel, and Thread
instead of encapsulating the first two and implementing
Runnable for the third.

How do I center my spreadsheet in the print option

how do I center my work in the print option

Duckie,
I think your best bet is to copy your work to Pages when you get ready to print and center it there. Much easier.
Jerry

How do I center my slide in the window in keynote

how do I center my slide in the window in keynote?
I know I can fit to window, but can I have the slide smaller than my window and centered?
It stays in the upper left hand corner.

You don't say, but I'll assume you mean that this occurs when Keynote is in "edit" mode. The positioning of the slide boundaries snug to the upper left is fixed in Keynote and can't be changed.
Many have looked for ways to add new objects, images, etc., coming from above and/or from the left off-slide. This can be done with some creative steps.
The simplest solution to this is to attach (group) an "invisible" handle to the object and use the handle to move the object out of sight to the left or above. Create an object such as a narrow rectangle, assign it NO FILL, NO LINE and while it is selected, Shift-Click on the object you wish to hide and then Arrange > Group. Now you have an invisible handle that you can use to hide your object off-slide.

How do you rotate a table in 'new' pages?

How do you rotate a table in 'new' pages, all my tables have spun round and I cant put them back?

Thanks I tried to get my original doc back, but it wouldnt open, tried via time machine and that was locked too!
Eventually had to save as a pages 09 doc, then reopen in pages 09 and turn everything back round
Think i will stick with the old verision for now!

How do I add "Save As" to the Pages drop down menu?

How do I add "Save As" to the Pages drop down menu?

It took me awhile but I found what I was looking for. This is posted at http://www.tuaw.com/2012/07/29/get-save-as-back-on-mountain-lions-file-menu-easi ly-and-without/
Option 1. Terminal.app If you are comfortable using Terminal.app, you can add a different keyboard shortcut this with one simple line. First, quit all your apps except Finder and Terminal. Then paste this command (as one line) into Terminal.app (and press Return):
1
defaults write -globalDomain NSUserKeyEquivalents -dict-add 'Save As...' '@$S'
view rawdwrite-global-saveas.sh hosted with ❤ by GitHub
That's it!
Launch TextEdit and open the 'File' menu and you should see "Save As..." back in its rightful spot with its original Command + Shift + S shortcut, as shown in the image above.
Aside: After you enter the 'defaults write' command, you will not see any confirmation that it was entered correctly. Terminal.app is a little terse sometimes. If you want to verify it from the command-line, enter this:
defaults read -globalDomain NSUserKeyEquivalents
and look for "Save As..." = "@$s"; in the output.
Option 2. System Preferences.app If you would rather not use Terminal, it's still very easy to add the keyboard shortcut.
Launch the System Preferences.app, then open the "Keyboard" preference pane.
At the top you will see "Keyboard" and "Keyboard Shortcuts" – click "Keyboard Shortcuts" (labeled '1' below). Then in the list on the left side, click "Application Shortcuts" (labeled '2' below). Then click the "+" button (labeled '3' below):
Once you press that "+" button, a small window will appear asking you to enter the title of the menu item and the keyboard shortcut that you want to use.
Enter "Save As..." in the "Menu Title:" field, and then press the keyboard shortcut that you want to use. In the example below I pressed Command + Shift + S:
Note: It used to be true that you had to enter an actual ellipsis (which you can get by pressing Option+ ; on a US-English keyboard). However, when I tested this in Mac OS X 10.8.2, it worked with three consecutive periods.
Bonus Tip: Hide the "Duplicate" menu item.
In my original article I suggested that you also enter a keyboard shortcut for "Duplicate" and while youcan do that if you wish, you do not need to do that.
However, if you would like to hide the Duplicate menu item, you can do that. There are two steps: first, remap "Save As..." to Command + Shift + S (as shown above). Then the 'trick' is to remap "Duplicate" to Command + Shift + Option + S.
What you will have done is swap the keyboard shortcuts for "Duplicate" and "Save As..." which means that OS X will make "Duplicate" the optional command. If you open the "File" menu and hold down "Option" the "Save As..." command will change to "Duplicate"
(Thanks to TUAW reader 'rbascuas' for pointing this out in response to the original article!)
Important Addendum: "Keep changes in original document"
As we reported in August 2012, the "Save As..." command in early versions of 10.8 had an unexpected and likely unwanted side effect in Mountain Lion: it would save the changes in the new document (created by "Save As...") but would also save the changes to the original document.
However, Apple realized that users might not want that behavior, so in Mac OS X 10.8.2 they added an option "Keep changes in original document" which you can see here:
Option A: If you want to save the changes you've made in the document and then save the document with a different name, then make sure that the box is checked.
Option B: If you want your original document to stay as it was when you last saved it and create a new document based on the modified content of that document, then make sure that box is not checked.
If you do not see the 'Keep changes in original document' box, then the application is probablygoing to give you the "Option B" behavior, but if you are not sure, I would suggest choosing Cancel in the "Save" dialog, then copy and paste the contents of the document into a new file, and save the new file. I know that's several extra-and-less-convenient steps, but if you are worried about preserving the original document, better safe than sorry.
You could also save the file, duplicate it in Finder, and rename the new instance. Open old file and revert to previous save using 'Versions'.
Frankly,I wish that Apple had just left the "Save As..." command alone, but for some reason they didn't ask my opinion. That said, I'm glad that they brought it back in Mountain Lion. I would have paid $20 for that feature alone.
Note: This article was re-written and republished on 2013–02–21. The original process still works, but I wanted to update it to reflect some additional information.

How to add 'Confidential' watermark to all the pages in portal

Hi
How to add 'Confidential' watermark to all the pages in portal.We have ESS/MSS business packages installed 60.1, 60.2.
ECC5, EP SP16 is the environment.
Help will be appreciated
Thanks
Sharath

Hi Sharath,
What about using the theme editor to add a background to either the page or the iView tray?
Daniel

How do I highlight selected text in the Pages, Keynotes?

How do I highlight selected text in the Pages, Keynotes?

To answer your question foor your iOS Device using Pages or Keynote for iOS: You can't highlight as you might in many note taking apps for iPad, etc.
The best you can do at this point is to change the selected text's color by selecting the text > Style Menu (wrench) > Tap on the Font > Tap on the Color Box to reveal choices.
If you would like to join the chorus of folks wishing such a feature were in Pages and Keynote, you can leave feedback for the people at Apple:
http://www.apple.com/feedback/

How can I build a table with the time values of a timer from a while loop

Hi:
I have a question concerning building a table:
Every 100ms I read a value from a sensor (while loop with a timer). I would like to build a table with the actual time and the concerning value. For example:
0msec         1V
100msec     2V
200msec     3V
300msec     4V
etc.
If I use the Express VI for building a table, I always get the date and time, but I don't need the date and the time is in the following format: HH:MMS, which is nonsensical for me as I can't differentiate within msec. Can I change the format anywhere?
Can I also save the table to a file or even to an Excelsheet? How can I do that?
Thanks for your help!

Hi Craig:
thank you very much. To solve the mystery : ) :
I want to drive a stepper motor with a specific frequency. To get the current degree value of the motor I would like to measure the current time (from the beginning of the move on). (With a formula I get the degree value out of the time)
Concurrently I would like to get data from a torque sensor and from a pressure sensor. That's why I asked you about the time and the table. The measurement should start with the movement of the motor. How can I do that? Right now I have different block diagrams (different while loops) (see attachment) and I would like to put them in one.
I haven't done the block diagram for the pressure sensor yet, so there is only the one for the torque sensor and the one for the motor.
I also would like to set a mark in the table when the voltage value of an analog input gets under a specific threshold value. Is that possible?
I'm sorry, I'm a novice in LabVIEW. But maybe you can help me.
Thank you very much!
Steffi
Attachments:
motor.vi ‏238 KB
sensor.vi ‏59 KB

How to mark a customizing table in the list of the SPRO?

Hi all,
I would like to highlight specific customizing table in the list that is presented within the SPRO transaction.
How is it possible?
(The highlighted table name should be sent as an input so maybe by evoking a user event)
Thanks,
Roy

Hi Roy,
I don't know any simple way. But you may try to add and maintain new custoimzing nodes using transaction SIMGH - many things are possible that way. Play around!
Regards,
Clemens

How to insert into 2 tables from the same page (with one button link)

Hi,
I have the following 2 tables....
Employees
emp_id number not null
name varchar2(30) not null
email varchar2(50)
hire_date date
dept_id number
PK = emp_id
FK = dept_id
Notes
note_id number not null
added_on date not null
added_by varchar2(30) not null
note varchar2(4000)
emp_id number not null
PK = note_id
FK = emp_id
I want to do an insert into both tables via the application and also via the same page (with one button link). I have made a form to add an employee with an add button - adding an employee is no problem.
Now, on the same page, I have added a html text area in another region, where the user can write a note. But how do I get the note to insert into the Notes table when the user clicks the add button?
In other words, when the user clicks 'add', the employee information should be inserted into the Employees table and the note should be inserted into the Notes table.
How do I go about doing this?
Thanks.

Hi,
These are my After Submit Processes...
After Submit
30     Process Row of NOTES     Automatic Row Processing (DML)     Unconditional
30     Process Row of EMPLOYEES     Automatic Row Processing (DML)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
50     Insert into Tables     PL/SQL anonymous block     Conditional
My pl/sql code is the same as posted earlier.
Upon inserting data into the forms and clicking the add button, I get this error...
ORA-06550: line 1, column 102: PL/SQL: ORA-00904: "NOTES": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table EMPLOYEES.
Is there something wrong with the pl/sql code or is it something else?

How do I center a table on the page in Pages?

Similar Messages

Maybe you are looking for