How do I change a 5.1 master output to stereo?

I'm working on a project at the moment in which, for some reason, we've managed to set up a 5.1 surround master output, but we only want stereo. How do I change the master output to a 2 channel format?
Incidentally, and for future reference on this subject of 5.1, is anybody out there using Logic 9 with Pro Tools LE hardware (I've got a 003 Rack+) ? Does the surround configuration work as flawlessly as the 8 input/2 channel output settings so far appear to?

David, I've had this happen before, you have to go through every channel in the mixer and look closely, something is in surround mode...some instrument or effect or something. Get rid of that or change it to stereo and your master will go back to normal....
Tom

Similar Messages

How to Track Changes in G/L Master ?

Hi,
I have a requirement to track changes in G/L master either in company code or chart of account.
For this there is a BTE but at the time of BTE calling table CDHDR is not updating, also for this there is no exit or badi exist.
Please suggest.
Regards,
Sooraj Saini

Hi Sooraj
we have GL account settings maintained in SPRO " define Gl account for product categories"
If you are talking about these then they are stored in table bbp_det_account
There you will see all the entries further to maintain the log of the same go to se11
technical settiings and check the below option
Here you will see the Log changes activate it and you would be able to see ..

How to avoid changes in Inactive pernr master data

Hi Expert,
I want to know the best option to avoid the changes in Separated employees master record. Client requirement is to freeze the separated employee History data related to PA, OM,Time, PMS.
can be do it level wise or Period wise?
Thanks,
Akhilesh

Dear Sandeep,
Your suggestion will work if Payroll is in process, in my case one of my client subsidiary having no payroll process in the system.
Client having PA,OM,Training & Event Mgmt. PMS, Time Mgmt. Process in SAP but not Payroll.
Payroll locking is not working as control record not maintained due to No payroll process in System.
there are huge data based of employee master with inactive status & requirement is to restrict the changes in inactive employees data.
can we do it ?
Thanks,
Akhilesh

HT4589 How do I change the audio to dual mono from stereo when using Share to DVD in Final Cut 10.1?

How do I switch the audio to Dual Mono from Stereo when using Share in Final Cut Pro 10.1? Even though the audio is all in dual mono in the timeline, it lists it as stereo in the share box.

Hi rationale1,
Welcome to the Support Communities!
The share to DVD settings in Final Cut Pro X use the Dolby Digital settings which are stereo for DVDs. So this can’t be done directly in Final Cut Pro X.
The link below will explain the Dolby Digital parameters and options in Compressor 4. You may need to research a different DVD authoring software to achieve your desired result.
Dolby Digital - Compressor 4 User Manual
http://help.apple.com/compressor/mac/4.1/#cpsrb71736a2
Dolby Digital
The built-in Dolby Digital settings (in the Create Blu-ray and Create DVD destinations, as well as the built-in AC-3 and EC-3 audio settings) use the Dolby Digital transcoding format. This format encodes Dolby Digital (AC-3) and Dolby Digital Plus (EC-3) audio files that contain multiple audio channels, including 5.1 surround sound. You can also create custom settings that use the Dolby Digital transcoding format.
Note: All files intended for video and audio DVD authoring must have a 48 kHz sample rate as required by the DVD specification.
DVD Video: Choose this option if you’re encoding for use in a DVD video authoring application.
DVD Audio: Choose this option if you’re encoding for use in a DVD audio authoring application.
Tip: For stereo encoding, rates of 192 kbps and 224 kbps are typical and will produce good results. For Dolby Digital 5.1 encoding, a rate of 384 kbps is recommended. For 5.1 Dolby Digital Plus encoding, a rate of 192 kbps is recommended.
Cheers,
Judy

How to get change documents for Equipment Master Records of a document?

Hi experts,
I need a report for changes of Equipment Master for a document.
There is a way to reach this for every document : Environement - > Display Changes. Then I can get a report for "Changes to Object Links". But this can only show me that which equipments are linked to this document. What I want to search is which documents are linked to the equipment. I want to search with equipment number and get the history of changes for documents, Which documents are attached to this equipments and when did these documents attach to the equipment.
Can I get this report with standard SAP queries / reports? Where can I get this informations? From which tables?
PS: If i run a search with Equipment Master Data form CV04N, I can see which documents are linked to this equipment but I can't see when they are attached.
Thanks in advance.

.. but I can't see when they are attached...
In CV04n,in Object Links tab,provide your search input criteria.Once the results are displayed,navigate to Current Layout button.Herein,move the 'Output Date' value to Displayed Column list.
Once done,you should be able to view the date on which the DIR with associated objects(Eg: Equipment Master) was created.Hope this helps!!
Regards,
Pradeepkumar Haragoldavar

How to transfer changes in my Vendor Master Data ? (currency)

Hello everybody,
I replicated my vendors with bbpgetvd and everything was fine. Now, my vendor master data has changed, some vendors were modified in their currency field.
If I run again the transaction "bbpgetvd", the program doesnt identify these changes =(
What can I do in order to update this data ?
Thanks and regards,
Diego

Hi guys,
Thanks so much for your help ! I tried bbpupdvd and it worked fine !
thank you !!!
Regards from Mexico,
Diego

How do I change the margins in Word output?

I'm using RoboHelp 9 as an intermediate format to convert FrameMaker 10 source to old-school 7-bit ASCII text with layout. The whole path is FrameMaker > RoboHelp > Word 2010 > Save as MS-DOS Text with Layout. I have this working with MIF2Go but want to switch it to RoboHelp since that's what the company owns.
The FrameMaker doc's page layout is 8.5" x 11" with .25" margins (8" text column). The text is Courier New 12.
The Word document generated by RoboHelp has 1" margins. Where can I change that?

Have you tried creating your own Word template with the required margins and using this when you generate your Word file from RH? See Peter Grainge's site - http://www.grainge.org/pages/authoring/printing/rh9_printing.htm for details

System preferences in iMac for sound output shows only headphones. How do I change this to get sound through computer? Thanks.

In sound System preferences on iMac headphones is only option for sound output. How do I change this to get sound output through computer, as in a video etc. Thanks.

There is a switch in the jack that may be stuck. Try plugging and unplugging a headset plug into the socket a few times.
You might try dipping the headset plug into some pure alcohol, wiping it nearly dry, and repeating the process to clean/clear the socket.

How can I change the language of my German copy of Master Collection CS6

Hi there,
The full Master Collection Suite v6 I installed this weekend is in German, how do I change that to english for all 20+ applications?
it's driving me bonkers trying to find a fix so if anyone can help big hugz to yoU!
Eva

It turns out I didn't notice that "Deutsch" was ticked in the installation preference screen. I must have read that as "Dutch" and continued with the install. I unisntalled the whole thing and started over.
Thanks both of you for the tips about the language swap option! Right now I need to leave it on Dutch for my course work but after that I will try and swap to English which will be much easier for work.
Thanks so much for your help!
Eva

How can i change my old master card account into my new master card account in app store?

HOw can i change my old master card account into my new master card account?

Howdy Aldringwapo,
Thanks for using the Apple Support Communities.
To change the payment information associated with your Apple ID, follow the directions in the article below.
Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
Have a good one,
Alex H.

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

I don't think Finder does this (I've tried).
iTunes does though. Where you can set artwork or the "poster frame"...
This may not be what you want but if it helps, I know 2 ways do this is
Open the video in QuicktimePlayer7 | View | Set Poster Frame (even then, you might need to save it as .mov (ie in a 'mov container').
Drag the file into iTunes and set the artwork (as in http://www.dummies.com/how-to/content/adding-album-cover-art-or-images-in-itunes .html)
From there, iTunes will use that frame as the "poster frame" ie the photo/frame that shows when you browse your videos. Which is what you want, but limited to iTunes.
When I do either of these above, the frame I set does not show when exploring files in "Finder" (or in the other Explorer tool I use called "Pathfinder").
So it maybe, that exactly what you want, is not possible.

How does attribute change run works for Aggregates and Master data?

Hi
Can anybody xplain how does the attribute change run works for Master data ?
For e.g.
There is 0spelling and it has master data
On Day 1 there are 10 records
day 2 it has 12 records
so with attribute change run this 2 new records will get added....
The values for this 12 records will added seperately in Data load
Is this how it workss
So how about Aggregates which has Master data.????

for e.g.
u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
so do ur aggregates on day1 with same values
now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
with data load u will load the data with version M of modified and is not available for reporting
If u do attribute change run then this modified version is activated to A i.e. active version .
It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
if u roll up aggregate before attribute change run , new data is not avaialable for reporting
if u roll up aggregate after attribute change run, then data is available for reporting
if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
this is how it works

How to change currency in material master

Could you please tell me multiple way to change currency in material master (mm02/mm02). Currency is under Costing2 tab in material master.
Thanks..

Hi,
In <b>SPRO</b>, u can change the Cuurency.
The Exchange Rate Type is used to store currency conversion rates for different purposes, in the R/3 System.
If the R/3 System is to perform exchange rate conversions between a large number of different currencies, it can be simplified by specifying a base currency per particular exchange rate type. Then specify the exchange rates of all currencies in relation to the base currency for the exchange rate type concerned.
In accordance with legal requirements, the base currency (EUR) must be defined as the From currency for currency conversions within the EMU (European Monetary Union). To do this, set the indicator in the field BCurr = From.
<b>IMG->SAP Netweaver->General Settings->Currencies->Check Exchange Rate Types.</b>
Regards,
Padmam.

Change pointer for HR master data is not getting generated in table BDCP

Hi,
I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
Can anyone assist me on how should i debug it.
Thanks
Sunil Singh

Hi Shital,
Thanks for your Reply.
I am not able to find that path in SPRO
Basic Functions-> application Area
And Also My change pointer configuration was working properly and it suddenly stopped working.
I mean to say all the required settings was done previously.
Anyways kindly let me know how should i proceed.
Thanks
Sunil Singh

How can I change excel column header using Labile.

Dear Experts,
                      How can i change excel column header using LabVIEW.
Thanks for any and all help!
M.S.Sivaraj.
Sivaraj M.S
CLD

As I said in my previous post, column headers in Excel are merely row 1 cells. May be I missing something here, so please be more explicit with your question.
I guess you are using the Excel Report tools, and you want to modify an existing sheet. From my limited experience with the Excel Report tools, it is not possible to open an existing woorkbook (except as template...), so the answer to your question should be "Forget it"...
The work around is to use the example I pointed for you before, and either to write the whole new colum headers as a string array, starting in A1, or to write a single string to a given cell in row 1.
Hope this helps
Chilly Charly    (aka CC)
         E-List Master - Kudos glutton - Press the yellow button on the left...

How do I change a 5.1 master output to stereo?

Similar Messages

Maybe you are looking for