How to get change documents for Equipment Master Records of a document?

Hi experts,
I need a report for changes of Equipment Master for a document.
There is a way to reach this for every document : Environement - > Display Changes. Then I can get a report for "Changes to Object Links". But this can only show me that which equipments are linked to this document. What I want to search is which documents are linked to the equipment. I want to search with equipment number and get the history of changes for documents, Which documents are attached to this equipments and when did these documents attach to the equipment.
Can I get this report with standard SAP queries / reports? Where can I get this informations? From which tables?
PS: If i run a search with Equipment Master Data form CV04N, I can see which documents are linked to this equipment but I can't see when they are attached.
Thanks in advance.

.. but I can't see when they are attached...
In CV04n,in Object Links tab,provide your search input criteria.Once the results are displayed,navigate to Current Layout button.Herein,move the 'Output Date' value to Displayed Column list.
Once done,you should be able to view the date on which the DIR with associated objects(Eg: Equipment Master) was created.Hope this helps!!
Regards,
Pradeepkumar Haragoldavar

Similar Messages

How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

How to get wage type for every time record

Hi Pros,
I am using DS 0CA_TS_IS_1, it includes report time type (0REPTT), but not have wage type. in CATSDB, I fied fields for attendance/absence type and wage type. but not every time record has wage type. can you please tell me how to get wage type for every time record? what is relation between reporting time type, attendance/absence type and wage typs?

Hello,
Can you talk to your HR/T&E functional consultant if they populate these values in CATSDB table using standard way or if there are custom fields that are in CATSDB OR any other table which can be used to meed the requirements
Thanks
Abhishek Shanbhigue

How to get change log for z-fields in VBAk(Sales order)

Hi All,
Please help me in this.
My requirement is get the change log for z-fields in sales order.
In the sales order header level we have one tab Additioanl data.
In this we have z-fields, if we change any of the field value, it is accepting the same and updating in data base as well.
But it is not appearing in change log<. I.e. Environment->changes.
How to get the change log for the z-fields.
In data element level enable the check box of change document.
Please help me in this.
Thanks in advance
Jaya,G

Hi Jaya,
For this you need to do some coding. Here is a link which tells you, step by step procedure how to activate Change log for the Z tables.
THe Object that you need to use for Sales Document is VERKBELEG
[https://wiki.sdn.sap.com/wiki/display/ABAP/Maintaining%20Change%20Log%20for%20Database%20Tables]
Hope this helps..
This is Primarily a Technical Consultant Job. Take his help before you make any changes.
Thnks
Srini

How to get change log for fields if change document flag is not maintained?

Hi experts,
My requirement is display the change log details for the transaction FAGLGA32.
In this transaction we have the Field Groups block.if any change is happened for field group we need to capture the change.
the field for the field group is RKAL1-FGFLG1 and the data element is FGFLG.
In the data element FGFLG, the flag CHANGE DOCUMENT is not maintained.
How to get the change log details for the fields for which the change document flag is not maintained at data element level?
Regards,
Ramesh

do a modification for the data element or try Audit Trail (depends on your release)
    Audit Trail (electronic records) / Tx AUT10, AUT01, XX-PROJ-ELR, OSS 564743,517613,564645
        Note 1058984 - FAQ: Audit Trail (Transactions AUT01-AUT10)
        http://help.sap.com/erp2005_ehp_03/helpdata/DE/fc/89683c1b5fb712e10000000a114084/frameset.htm
cheers
carsten

POP-UP message displaying internal note for Equipment master records

In the equipment master data there is a option for entering an "Internal note" to the right hand side of the Equipment description.
We have maintained a few masters with this internal note. The team wants to have a pop-up of this message everytime the equipment is acessed using T-code IE02 and IE03 for information.
Can some one help me achieve this functionality.
Thanks
Murad

Hi
please try following
FM : EXIT_SAPMIEQ0_001 user Exit IEQM0003 or
BADI: Equipment Master Data
enter your coding there by ABPA team ask for pop up
Regards
pratap

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

Change pointer for HR master data is not getting generated in table BDCP

Hi,
I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
Can anyone assist me on how should i debug it.
Thanks
Sunil Singh

Hi Shital,
Thanks for your Reply.
I am not able to find that path in SPRO
Basic Functions-> application Area
And Also My change pointer configuration was working properly and it suddenly stopped working.
I mean to say all the required settings was done previously.
Anyways kindly let me know how should i proceed.
Thanks
Sunil Singh

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

Interface between Legacy and SAP for Equipment Master

Hello
I got a requirement where I need to develop a interface between legacy system and R/3 system for Equipment Master Data update in R/3. I am thinking of getting a Idoc file from Legacy and then update the changes or any new creation of Equipments in R/3. I found a standard BAPI for this BAPI_EQUIPMENT_CREATE/CHANGE. This BAPI use a strcture BAPI_ITOB for data record of IDoc. But I got more data from legacy except what we have in BAPI_ITOB. I got Partner Data, Classification data also for Equipments. I am thinking of copying the BAPI to a Z function module and modify the Idoc structure , message type and all to capture all the data and then do a update in same way as standard transaction IE01(Equipment Create) is doing in Batch Input. Do you think if there is any better way of doing this? I am not used to transaction BAPI . just wondering if we Can use that in someway to include our modification?
Thanks
Harkamal

20,000 is on quite higher side for IDOC.
IBIP help doc says it needs 2 Kbyte for each record, i.e. 40 Mb for 20,000 rec. that should be ok. Since it has structures for Partner & classification data , I don't think u need to modify the BAPI.
Transaction IE01 - Create equipment
Transaction IE02 - Change equipment
Structure - IBIPEQUI Equipment record
                 |->    IBIPNSTA     New status profile if necessary
                 |->>   IBIPSTAT     User status records
                 |->>   IBIPDOCU     Doc. from Doc. management system
                 |->>   IBIPPART     Partner details (comment below)
                 |-->> IBIPTEXT     (see comment below)
                          for long text:          TEXT_MARK = " " empty
                          for internal comment:   TEXT_MARK = "1"
                 |-->> IBIPCLAS    Classification record (eqpmt class)
                     |-->> IBIPFEAT     Classification characteristics,
                                           ie. features for the class
                 |-->> IBIPBDCD     see below (from screen 102)

How to get change date in Production Order ?

Dear Friends,
I want to know it, how to get change date in Production Order "Administration-TAB".
F1-Help, It is displayed with "Change date for Order Master". and Structure table "CAUFVD".
But, CAUFVD is not Transp. Table.
Which table should I read ?
Thanks in advance
Yamazaki-H

Dear Friend
Thank you for an answer.
It was settled.
Best regards.

Enhancement for Equipment master data

Hi all
I want to find an enhancement for Equipment master data. I want to add some customer fields to Equipment data,but i can't find the enhancement.Anybody tell me the Enhancement which be useful for that. thanks.
BR
Chris.

Hi,
you can add new tab on the screen and provide your custom field on that tab. You have to add a new tab for any Technical Object by doing some configuration changes in SPRO. first go to SPRO and in screen sequences add a new tab sequence against the profile. Now in the function group SAPLXTOB you can see this new tab screen. Do your requirements on this screen.
Reward if useful and get back to me if you need any help.
Thanks,
Anil

How to follow data migration for Euipment Master

Hi Friend
We need to use data migration systm to transfer data for equipment master from legacy system to SAP. We require to generate 3000 equipment master in SAP. Can you tell me what should I follow , BDC or LSMW? I am a functional consultant and have no knowldge in ABAP. I even cant get any support in ABAP.
Pls also tell me the steps to execute the migration.
Take Care
Sangeeta
Moved by moderator from the TDMS forum
Edited by: Hilit Fisch on Apr 13, 2009 8:37 AM

Hi Sangeeta,
I would personally go for a BDC but LSMW should also be possible
If you don't know how to do a BDC just drop me a mail and I send you the details.
Hopefully this one is than solved by the EOD.
Regards,
Eddy

How can I change the page size of a scanned PDF document?

How can I change the page size of a scanned PDF document?
I scanned a 50-page document with an HP 5610xi All-In-One using the software that comes with it: HP Scan Pro. Though the physical document has standard 8.5" x 11" pages, the PDF resulting from scanning has page size set to 35.42 × 48.67 inches (according to Preview's "Tools > Inspector". I want to resize the pages to 8.5" x 11". Shouldn't Preview be able to do that with "Tools > Adjust Size..."? When I try, the menu option is grey so I can't select it.
I'm using Preview Version 4.2.

Thanks for the insight; that explains why it's the wrong size. I selected 300dpi scanning (which is the default, actually), but HP Scan Pro evidently created a PDF with 72dpi indicated. I want it fixed because I want to distribute the file to other people and have them able to print or display it without problems.
I still don't know why Preview won't let me change it, but your question about whether I wanted to print it did lead me to find a workaround: "File > Print" and "Save as PDF..." saved it with the correct page size.

How to get change documents for Equipment Master Records of a document?

Similar Messages

Maybe you are looking for