How do I configure OEM Database Control 10g

Hi Gurus,
I have Oracle 10g Release 2 (10.2.0.1) on Windows XP installed. How do I configure Database Control 10g??
Any help is appreciated
Thanks !!!

Use the enterprise manager configuration assistent (emca)
<ORACLE_HOME>\bin\emca
with emca -h you get some help

Similar Messages

  • How To Install/Configure OEM Grid Control On Windows

    Hi,
    I've downloaded OEM Grid Control for windows (32-bit) from oracle site.
    This .zip files has 3 more .zip files eg
    File Size
    3822442.zip 510 MB (535,208,588 bytes)
    3731596.zip 275 KB (282,502 bytes)
    3731593.zip 510 MB (535,047,905 bytes)
    Can you pls tell me which one is actual OEM Grid Control software, and what are the other .zip files ?
    Pls email me at [email protected]
    Your help greatly appretiated.
    Regards,

    You will be needing all three zip files. It will contain all files needed for installation of a repository Database Instance, the Management Server and an Management Agent.
    cheers
    Rob

  • Is OEM database control configured for the DBs?

    Hi
    I have multiple oracle (10gR2) databases running on a linux (5.8) server. How can I check that for which of the databases has the OEM Database Control been configured and on what port is it listening?
    Best regards

    Thank you everyone!
    Here is what I see (I have changed the DB names):
    ==============
    [oracle@vm58-1 install]$ emctl status dbconsole
    TZ set to US/Eastern
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation.  All rights reserved.
    https://vm58-1.com:1158/em/console/aboutApplication
    EM Daemon is not running.
    Logs are generated in directory
    /u01/app/oracle/product/10.2.0/db_1/vm58-1.com_db1/sysman/log
    [oracle@vm58-1 install]$ export ORACLE_SID=db2
    [oracle@vm58-1 install]$ emctl status dbconsole
    TZ set to US/Eastern
    OC4J Configuration issue.
    /u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_vm58-1.com_db2
    not found.
    [oracle@vm58-1 install]$
    ==============
    So it seems that DB Console was configured for db1. When I try to start it, I get following output
    ========
    [oracle@vm58-1 install]$ export ORACLE_SID=db1
    [oracle@vm58-1 install]$ emctl start dbconsole
    TZ set to US/Eastern
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation.  All rights reserved.
    https://vm58-1.com:1158/em/console/aboutApplication
    Starting Oracle Enterprise Manager 10g Database Control
    ========
    And these "dots" just continue to appear and it is running for 15+ minutes now.
    Please advise how to check what is happening.
    Grid Control suggestion - I agree. I believe Grid Control is not free and the client does not seem to be interested to spend more money :-)
    Best regards

  • OEM Database Control and 10g Grid Control

    Can any one tell the difference between OEM Database Control and OEM 10g Grid Control.

    Database Control is the HTTP Management environment and comes installed with the 10g Database. It can be used to manage one database (one target) at a time (standalone). To monitor more than one database, you must create a new console on a different port for each database.
    10g Grid Control is the Enterprise version in that you can monitor different Target from different operationg systems at the same time. These include Application Servers, Listeners, Operation Systems, Non Oracle Database Systems using plugins (from 10gR2).
    So, for someone who was using OEM 9i, there was connection in to Standalone Console (Java) and Oracle Management Server (Java and HTML). In 10g, they are replaced with Database Control (Java and HTML versions) and Grid Control respectively.

  • Do i need to reconfigure OEM Database Control when change ip address?

    Hi all.
    Do i need to reconfigure OEM Database Control after a change of ip address?
    I mean, i have an OEL5 box with 10g Rel2. I have configure the server with a static ip address.
    This server will be sent to another location and it's possible the ip address will be changed. It will remain a static ip, but may change. Since i plan to deliver this server with rman jobs within OEM Database Control. I'd like to know if this will continue working after an eventual ip address change ....
    Regards....!

    myluism wrote:
    Hi all.
    Do i need to reconfigure OEM Database Control after a change of ip address?
    I mean, i have an OEL5 box with 10g Rel2. I have configure the server with a static ip address.
    This server will be sent to another location and it's possible the ip address will be changed. It will remain a static ip, but may change. Since i plan to deliver this server with rman jobs within OEM Database Control. I'd like to know if this will continue working after an eventual ip address change ....
    Regards....!It depends.
    When you created the dbcontrol, the configuration was put in a directory in ORACLE_HOME named something like 'hostname_sid' and there are also files under that where the hostname is baked into either the file name or a property of a configration defined within a file. If it is truly hostname, you might be ok, but if it is actually IP address instead of host name (I have seen that) then you obviously have a problem.
    Over the years (and across several versions) I've found the OEM repository to be rather "brittle", and Oracle to have a rather cavalier attitude about rebuilding it. As a result, I specifically DO NOT have anything important - and very specifically my backup jobs - in the repository. I still schedule my backups through rman, though I know many people use dbms_scheduler. But even that appears to not be the same as an oem controlled schedule.

  • OEM Database control

    Hi Friends,
    I have install 10g on xp2 , and created one database at the time of installation and 2 more database using DBCA afterword...
    But not a single I able to work on using OEM Database control. ...
    When I check in the services their is no service name oraclelistener in the services list....
    Now what to do so that I can use all the three database using OEM....
    Thanks and Regards

    I have install 10g on xp2 , and created one database at the time of installation and 2 more database using DBCA afterword...
    But not a single I able to work on using OEM Database control. ...
    When I check in the services their is no service name oraclelistener in the services list....
    Now what to do so that I can use all the three database using OEM....
    Welcome to OTN,
    OEM configured successfully or not? if not you can create manually
    http://www.akadia.com/services/ora_dbconsole.html
    Edited by: CKPT on Jul 21, 2011 9:16 PM

  • Database control 10g  agent connection to instance down

    I am use oracle OEM of database control 10g ,in OEM home page two instance are seen but when i hv click in switch in instance2 then agent connection to instacne is down
    i hv also check the alert log of OEM but i give not answer
    pls how can solve this problem

    Please provide emoms.trc/emagent.trc and platform info

  • Configurations with database control

    I want to do configurations with database control but when i give servername like
    http://pluto:1178
    i am getting error that page cannot be displayed
    $ more portlist.ini
    iSQL*Plus HTTP port number =5570
    Enterprise Manager Console HTTP Port (test) = 1178
    Enterprise Manager Agent Port (test) = 3978

    Thanks its working but its not showing the options like
    Home
    Performance Administration Maintenance
    only startup and recovery options are there
    Please let me know how to enable b] Performance Administration Maintenance

  • Where is Oracle streams in OEM database control?

    Hi, friends:
    trying to setup streams between two instances, suppose in OEM db control I can find a GUI tool, but can not find out it where, so where is Oracle streams in OEM database control?
    thanks a lot in advance.

    When you say OEM database control it is not clear if you refer to the java gui OEM or the Web EM DB control console, as a de facto standard when you say OEM you refer to the 9i Java based GUI admin tool, on the other hand, when EM Control is mentioned it refers to the 10g web based admin tool.
    If you mean the Java Console, you should consider reading this reference --> Using Oracle Streams to Integrate Your Data
    ~ Madrid

  • OEM Grid control 10g on Linux

    Hello,
    I have installed OEM grid control 10g and able to connect to the console via the sysman user id.
    I am trying to configure email notification, but though I put all credentials properly I am not able to receive any emails.
    I was looking at Oracle documentation and it says....
    The SMTP server is the name of the mail server (for examplemail.acme.com).
    For Linux, the SMTP server must be the local host name.Use the fully qualified host name (including domain
    Does the smtp server need to on the localhost ? can't it work with a smtp server on a different host than the grid control box ?
    Any advice will be much appreciated.
    S.

    The smtp service doesn't need to be on the host you installed grid control, Grid control can use any smtp server as long as it can reach it.
    Regards
    Gokhan

  • OEM Grid Control 10g Deployment

    Hi,
    We are planning to deploy OEM Grid Control 10g (with Diagnostics and Performance Management packs) for management and monitoring of following targets:
    Oracle Databases (9.2.x, 10.x) - 12
    Oracle Application Servers 10g - 6
    OEM documentation states that for smaller deployments (targets < 100); following h/w specs would be sufficient:
    CPU: 1 (3GHz)
    Memory: 4 GB (2GB for OMS, 2GB for OMR)
    Disk Storage: 12 GB (2GB for OMS, 10GB for OMR)
    I want to know:
    i) Will that amount of disk storage will be sufficient?
    ii) What would be the growth rate of OMR (Oracle Management Repository)?
    iii) What other factors should be considered?
    All suggestions are welcome.
    Regards,
    Preet

    Hi Preet,
    We had a 200+ (now 700+) target install in a major Telco and at that time
    the repository database size was just 25 GB. So 10 GB for the database
    itself should be ok. However sounds like you are crunched for space.
    Bear in mind you need space for the installation of the EM10g OMS home,
    the Agent Home and the Database home. So I dont think 12 GB is enough
    for you. Try it out in test.
    Regards,
    Porus.

  • OEM database control for 10.1

    Hello:
    I am just assigned to manage a oracle 10.1.0 database which was set up by another person, from Universal installer, I can see the OEM database control was installed, but I can't see to find it anywhere? from program or oracle_home. I can't fined it's log file either. Can someone help out?
    Thanks a lot.
    Wendy

    Check my response here:
    Re: starting gridcontrol?

  • How to (what to) download and install OEM database control

    Hello
    Can you please tell me the name of the file I should download (Is it still accessible?). I have download many of the oracle product files but don't have the OEM one burned to a CD.
    I want to reinstall my database as I have changed my domain name and the OracleConsole(orcl)
    I.E.
    L:\app\owner\product\11.2.0\db_1\bin\nmesrvc.exe fails to start.
    My situation is that I am using a single instance of Oracle 11G R2 for self educational training and development.
    I am running on Windows XP SP3.

    Hi,
    To create or recreate a database control you need to execute the following commands:
    Create the DB Control Repository Objects and Configuration Files
    $ <ORACLE_HOME>bin/emca -config dbcontrol db -repos create
    ReCreate the DB Control Repository Objects and Configuration Files
    $ <ORACLE_HOME>bin/emca -config dbcontrol db -repos recreate
    Best Regards,
    Venkat

  • OMS Configuration Failed In the Process of Installing OEM Grid Control 10g

    Hi every one,
    i am getting the same problem in the installation Configuration Assistants, OMS Configuration Failed
    I have already installed the Oracle software, created the databse and when i started installation, i selected the 2nd option to use the existing database.
    here is i am getting the error:
    details says that are as follows
    oui-25031 oracle.sysman.emcp.agent.agentplugin,
    so i followed the steps and drop the sysman user with cacade option
    again i got the same error,
    Environment:
    Microsoft Windows XP Professional SP3,
    Oracle 10G 10.2.0.1.0 (Already Installed)
    Dell Inspiron 530
    Intel(R)Core(TM)2 Quad CPU [email protected], 3.0GB RAM
    have enough hard disk.
    Now installing Oralce Enterprise Manager Grid Control 10g release2 (10.2)
    i have seen the error messages in this forum many are on unix environment.
    any views on windows operating system?
    Thank You.

    hi,
    before you install grid, try and patch the database to a later release, 10.2.0.4
    had this issue in work and patching the db resolved the issue.
    I did install database software only, then patch then create database, then install grid
    regards
    Alan

  • How to Schedule Job using Database Control for SQLPLUS script?

    Hi All,
    I am using Database version 10.2. I would like to schedule a SQLPLUS script job using Database control (Not using Grid Control!). The following is the script.
    ========================================================
    define OEM_FRIENDLY=1
    define OWB_BACKGROUND=0
    set serveroutput on
    set verify off
    whenever sqlerror exit failure;
    define REPOS_OWNER='&1.'
    define LOCATION_NAME='&2.'
    define TASK_TYPE='&3.'
    define TASK_NAME='&4.'
    define SYSTEM_PARAMS='&5.'
    define CUSTOM_PARAMS='&6.'
    alter session set current_schema = &REPOS_OWNER.;
    set role owb_d_&REPOS_OWNER., owb_o_&REPOS_OWNER.;
    variable exec_return_code number;
    begin
    -- Initialize Return Code
    :exec_return_code := wb_rt_api_exec.RESULT_FAILURE;
    -- Run Task
    :exec_return_code := wb_rt_api_exec.run_task('&LOCATION_NAME.',
    '&TASK_TYPE.',
    '&TASK_NAME.',
    '&CUSTOM_PARAMS.',
    '&SYSTEM_PARAMS.',
    &OEM_FRIENDLY.,
    &OWB_BACKGROUND.);
    end;
    exit :exec_return_code;
    ===========================================================
    Is it possible to schedule SQLPLUS script with 6 different parameters? If yes then how can I schedule for monday to friday or only for Saturday and sundays.
    Please provide brief steps.
    Thanks for your help in advance.
    - Mehul

    Let me explain to you about scheduler.
    You can schedule a pl/sql stored procedure TEST_S as follows...
    Begin
    dbms_scheduler.create_job(
    job_name=>'MY_JOB',
    Job_Type=>'STORED_PROCEDURE',
    job_action=>'TEST_S',
    start_date=>sysdate,
    repeat_interval=>'freq=monthly;BYDAY=MON,TUE,WED,THU,FRI',
    end_date=>null');
    END;
    You can also also execute o/s script like .bat or .sh. For this job type should be EXECUTABLE.
    Example of converting a .sql script in .bat script...
    insert.sql
    insert into dept values(50,'IT','LONDON');
    exit
    insert.bat
    sqlplus scott/tiger @insert.sql
    Executing now...
    C:\Documents and Settings>insert.bat
    C:\Documents and Settings>sqlplus scott/tiger @insert.sql
    SQL*Plus: Release 10.2.0.1.0 - Production on Thu Mar 1 08:01:00 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    1 row created.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - P
    oduction
    With the Partitioning, OLAP and Data Mining options
    C:\Documents and Settings>
    So first read about DBMS_SCHEDULER and do the work in prompt. Then you can go and schedule it even by database control.
    Scheduling by database control...
    http://www.oracle.com/technology/oramag/oracle/04-jul/o44tech_dba.html
    Scheduler
    http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sched.htm#CIHEHDHA
    PS: By default each job you created is disable state. Please enable it by enable procedure of DBMS_SCHEDULER package.

Maybe you are looking for