How do I create an artificial horizon indicator?

I need to create an artificial horizon indicator to show pitch and roll. Does anyone have any suggestions on how to accomplish this?

A solution is to use a picture indicator as in the attached vi.
The "trackball" is just the cursor of an XY graph placed over a boolean.
You can further improve the display by adding scales (see Functions > Graphic and sound > Picture plots) or making it round-shaped (use a mask).
Enjoy
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Pitch&Roll.zip ‏21 KB

Similar Messages

How can i create a custom control, indicator

This is FredFred,
How can i create a custom control switch with 3 or more options,
OFF
ON
STANDBY
Other than rocker, slide, or toggle switch, are there other switches that we can use, hence, the question of creating a custom switch.
Also, is there a way to create an indicator with two options. Enclosed is a jpeg with an example of what i need
Thanks in Advance
Attachments:
sample switches_displays.bmp ‏720 KB

Hello.
Boolean controls can only have 2 possible values, true or false, and there is no way to add more values to them.
If you need more values, then you must use a numeric control (or a string, but I tend to like numerics better, although strings could be just as useful).
There are several types of numeric controls you could use to provide 3 or more options. Attached is a VI which shows a ring, a knob, and a slide each with 3 possible values. In your code, you would then perform different actions depending on the numeric value of your control.
Hope this helps,
Alejandro
Attachments:
NumericsWith3Options.vi ‏14 KB

How can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi

Hai to all,
how can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi.
as u can see in my block diagram(attached), i can use statistic to read the RMS value for the data but i cant's use it on the FFT Spectrum (mag-Phase).vi .
Thank you for helping.
Attachments:
block diagram.jpg ‏48 KB

hafizzuddin wrote:
thank you for the opinions, for now i am not using any express Vi..
In the long run you will benefit from this. Anyway is your problem solved, or do you need more help?
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

How can I create an empty row on a #TempTable based on an input parameter

So if my Line of Business is 'MC' or 'MG', I have to go over to Oracle and get its data accordingly. Then, when I create my final report result set, I think I'll want to UNION in that result set if my Parameter is 'MC' or 'MG'. I don't think I can UNION
based on the value of the Parameter. So my thought process was to create an empty row on my #TempTable so when I UNION and my parameter is NOT 'MC' or 'MG' then it will have nothing to UNION in. My struggle is how do I create an empty row in my #TempTable
if my parameter is NOT 'MC' or 'MG'
If I am wwwaaayyy off here, please tell me so.
This is my #TempTable Creation SQL...
IF EXISTS
(SELECT 1
FROM [#TempTable_LineOfBusiness_Parameter]
WHERE [#TempTable_LineOfBusiness_Parameter].[RESULT] IN ('MC','MG'))
BEGIN
SELECT *
INTO [#TempTable_Market_Prominence_Member_Data]
FROM OPENQUERY
(RPDMHF,
'SELECT HCFA_NAME_ORG.NAME_ID,
HCFA_NAME_ORG.MEMBER_ID,
HCFA_NAME_ORG.HIC_NUMBER,
MEMBER.NAME_FIRST,
MEMBER.NAME_LAST,
HCFA_DATE.START_DATE,
HCFA_DATE.END_DATE,
HCFA_NAME_ORG.COUNTY_CODE,
HCFA_NAME_ORG.PART_A_PAYMENT,
HCFA_NAME_ORG.PART_B_PAYMENT,
HCFA_NAME_ORG.STATUS,
HCFA_NAME_ORG.ORG_ID,
HCFA_NAME_ORG.PLAN,
HCFA_NAME_ORG.ENROLL_DATE,
HCFA_NAME_ORG.PBP_ID,
HCFA_DATE.VALUE
FROM SC_BASE.HCFA_DATE
LEFT JOIN SC_BASE.HCFA_NAME_ORG
ON HCFA_NAME_ORG.NAME_ID = HCFA_DATE.NAME_ID
LEFT JOIN AMIOWN.MEMBER
ON TRIM(MEMBER.MEMBER_NBR) = TRIM(HCFA_NAME_ORG.MEMBER_ID)
WHERE HCFA_DATE.INDICATOR = ''plan''
AND HCFA_DATE.START_DATE >= ''2015-01-01''
END
If I add an ELSE, it always comes back and tells me the #TempTable_Market_Prominence_Member_Data already exists. As if it's creating it regardless of the Top IF.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
The error came back from your ELSE Statement most probably caused by the reason mentioned in Hoffmann's post.
Regarding your requirement, I would suggest you CREATE the [#TempTable_Market_Prominence_Member_Data] explicitly.
CREATE TABLE [#TempTable_Market_Prominence_Member_Data]
NAME_ID INT,
MEMBER_ID INT,
HIC_NUMBER VARCHAR(99),
NAME_FIRST VARCHAR(99),
NAME_LAST VARCHAR(99),
START_DATE DATE,
END_DATE DATE,
COUNTY_CODE VARCHAR(99),
PART_A_PAYMENT MONEY,
PART_B_PAYMENT MONEY,
STATUS VARCHAR(99),
ORG_ID INT,
PALN VARCHAR(99),
ENROLL_DATE VARCHAR(99),
PBP_ID INT,
VALUE INT
IF EXISTS
(SELECT 1
FROM [#TempTable_LineOfBusiness_Parameter]
WHERE [#TempTable_LineOfBusiness_Parameter].[RESULT] IN ('MC','MG'))
BEGIN
INSERT INTO [#TempTable_Market_Prominence_Member_Data]
SELECT *
FROM OPENQUERY
(RPDMHF,
'SELECT HCFA_NAME_ORG.NAME_ID,
HCFA_NAME_ORG.MEMBER_ID,
HCFA_NAME_ORG.HIC_NUMBER,
MEMBER.NAME_FIRST,
MEMBER.NAME_LAST,
HCFA_DATE.START_DATE,
HCFA_DATE.END_DATE,
HCFA_NAME_ORG.COUNTY_CODE,
HCFA_NAME_ORG.PART_A_PAYMENT,
HCFA_NAME_ORG.PART_B_PAYMENT,
HCFA_NAME_ORG.STATUS,
HCFA_NAME_ORG.ORG_ID,
HCFA_NAME_ORG.PLAN,
HCFA_NAME_ORG.ENROLL_DATE,
HCFA_NAME_ORG.PBP_ID,
HCFA_DATE.VALUE
FROM SC_BASE.HCFA_DATE
LEFT JOIN SC_BASE.HCFA_NAME_ORG
ON HCFA_NAME_ORG.NAME_ID = HCFA_DATE.NAME_ID
LEFT JOIN AMIOWN.MEMBER
ON TRIM(MEMBER.MEMBER_NBR) = TRIM(HCFA_NAME_ORG.MEMBER_ID)
WHERE HCFA_DATE.INDICATOR = ''plan''
AND HCFA_DATE.START_DATE >= ''2015-01-01''
END
Explicitly creating the temp table will offer below benefit in this case.
The ELSE statement is no longer needed, if the no rows get inserted into that table, it has nothing to union an empty table.
With the column datatype defined, you can avoid such conversion error
SELECT NULL AS COL1,NULL AS COL2 INTO #T
SELECT COL1,COL2 FROM #T
UNION
SELECT 1,'ABC'--Conversion failed when converting the varchar value 'ABC' to data type int.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

I NEED HELP! How do you Create a Drop Down Accordion Navi with the child pages remaining expanded

I would like to know how I can create a vertical accordion navigation with some custom modifications.
I need it to function like this sites vertical navigation. (link is below) Click on the parent page "bedrooms" and it expands revealing all of the "child pages" then click on one of the child pages, it turns the font to Underlined and all the child pages remain exposed! (it does not collapse after you click on a child page!!!!!!!) I need my site to do this as it tells the visiter where they are exactly on the site!     Please HELP ME! Thank You!
I would actually like mine to be a little more pronounced. Perhaps having the link turn to BOLD Font indicating you are on that page. And the main Parent page would have a diffrent background color.
Site that has the Navi that I want to Mimic:
http://www.fowfurniture.com/
EXAMPLE: Adhesives IS IN BOLD indicating you are on that page. and it remains open it should remain open until you click on another parent page like Hardwood. (Then the Hardwood child pages (Sub Menu) would expand looking like the carpet sub menus/child pages. All of the accordians i have found seam to collapse after you select a child page (sub menu) and the visitor wouldn't know where he is on the site... Please Help Me accomplish this!
Carpet
                      Repairs
                      Fibers
                      Adhesives
                      Tools
                      Pad
Hardwood
When nothing is selected it should look like this: The cell of "Carpet" is a slightly a diffrent color because it is in the "Hover" state.
Carpet
Hardwood
Tile
Vinyl
Linoleum

Still need help, I could do it for a value lower. contact me at [email protected]

How do I create an xControl with multiple inputs and outputs?

Hello,
i am trying to write a new Xcontrol Element. In the data model I can create data types using the cluster to create compound types, eg an int and an int array. But how do I create an xcontrol which has multiple data inputs and outputs?
Kind Regards

Limping_Twerp wrote:
Alright: I see: An xcontrol is either an input OR an output. How do I achieve an output? Secondly: So you are saying the only Elements that can have multiple inputs and outputs are VIs?
Can you take a few steps back and explain what you are actually trying to do. SubVIs and Xcontrols have nothing in common and it is not clear why you even try to compare them side by side (e.g. in terms of the number of connectors).
Your questions about input or output tell us that you seems to have some misconceptions about xcontrols. Xcontrols are like regular controls, except they have some built-in intelligence that you can program. Most front panel object can be either controls or indicators and the same is true for Xcontrol. You create an Xcontrol, and after placing it on the front panel you can decide if it should be a control (where the code reads the value) or an indicator (were the code writes values to it). When you define the xcontrol facade, you also need to program how the visuals change if it is changed from control to indicator or vice versa.
As a first step, you should opend the example finder and look at some xcontrol examples.
Again, what are you actually trying to do?
LabVIEW Champion . Do more with less code and in less time .

How can I Create a exe file were a tab control on it work`s

I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?"
Attachments:
project7.1.jpg ‏129 KB

Make the tab control a control and not an indicator. If you want to write
to it you need to create a local variable.
"Carlos-R." wrote in message
news:[email protected]..
I have a VI with many controls and indicators,these are spread on a
tab control.This tab control works with out any problems but if i
create a exe file then the tab control is fixed. How can I create a
exe file so that the tab control on it work´s ?"

How do I create overlapping tables in Numbers?

I've been fighting with numbers and so far I've found the users guide and help more frustrating than useful. After much searching, I found out that numbers apparently can't do what I wanted to do (dynamically create the entries in a popup from data on a table. I *DO NOT* want to edit the popup items directly).
So I went hunting for a second choice...which I found an acceptable solution, except there are a few critical details missing. The discussion had this bit in it below. My question is, how do I create this locked table underneath another cell? I've been unable to find anything searching via google, in numbers help, or the numbers users guide and I'm beyond frustrated right now. I need step by step instructions and please don't assume I know anything about numbers.
"The trick is to have a locked table underneath the input cell. The formula will be in the locked table and the input cell will have a transparent Fill so you can see the underlying table content."
The full discussion is here:
https://discussions.apple.com/message/11041900?messageID=11041900

cwolf2k wrote:
My question is, how do I create this locked table underneath another cell? I've been unable to find anything searching via google, in numbers help, or the numbers users guide and I'm beyond frustrated right now. I need step by step instructions and please don't assume I know anything about numbers.
Starting point: A single sheet document with one table. For simplicity, I'll assume the one table is the one inserted on the original sheet, and has not been resized or otherwise reformatted.
• Insert a second table (Table 2"). Choose Plain as the type. (ie. No header rows, No header columns)
     - Use the Column and Row Handle (bottom right corner of the table); drag it up and left to reduce the table to a single cell.
• Edit the contents of this cell to contain the formula you wish.
• Click on the Table 2 icon in the Sheets list at the left to Select Table 2. You will see square handles at the corners (and in the center of the top and bottom edges) of Table 2.
* Drag Table 2 (the table itself, not the icon) into position in front of Table 1 (the original table). If necessary, use the arrow keys to nudge it into position.
• Go to the Arrange menu and choose Lock. The square handles will change to grey x characters, indicating the selected object is locked.
• Click on the Table 1 icon to select Table 1.
• Go Arrange > Bring to Front. Table 2 and its content will disappear behind Table 1.
• Open the Inspector and choose the Table inspector. Find the Cell Background section, and click the Color Well below the popup menu (which should say "Color Fill").
• The Color Picker will open. Move the Opacity slider to the left end of the bar (0). The content of Table 2 will become visible again.
• To hide the contents of Table 2 when an entry is made in the cell in front of it, you will need either:
       a formula in the Table 2 cell that changes its value to "" (a null string) when the cell in front is not empty, or
       a conditional formatting rule that places an opaque white fill in the front cell when it is not empty.
The formula or the conditional rule will depend on the possible values to be placed in the front cell.
Regards,
Barry

How do you create hanging indents in Pages?

How do you create hanging indents in Pages?

Look at the left hand margin indicator -
Compare it to the right-hand one. You'll note that it is actually two stops, instead of just one - a small bar on top of a triangle.
Split them by careful dragging, and you can get what you want -
You may need to do a bit of fiddling until you get it just the way you want it.

How do I create reusable titles in premier elements 13?

how do I create reusable titles in premier elements 13?

thomas
Premiere Elements 13/13.1 Expert workspace
After you create your title in the Titler, close the Titler.
The tilte file will have been automatically placed on the Timeline at the position of the Timeline Indicator.
Open Project Assets, and select the thumbnail for the title file that was placed there also automatically.
With the Project Assets title thumbnail selected, go to File Menu/Export/Title in order to export your title as a prtl file saved to the computer hard drive for future use. This principle also applied to Title Templates edited in the Titler.
Please let me know if you are OK with the details. Please ask if you need clarification on the above.
Thank you.
ATR

How to properly create complex OCI objects (for Annotation Text)

I am upgrading a tool that will upload text objects to a table with a ST_ANNOTATION_TEXT field. The app is a C++ app and I need to instantiate a ST_ANNOTATION_TEXT (using OCIObjectNew??). I actually have 2 questions. First, does anyone have an example of how to accomplish this? I seem to be unable to correctly create the annotation text type in C++ to be able to append to (calling OCICollAppend). Second, since ST_ANNOTATION_TEXT is a complex type (contains an array of annotation text elements), do I need to call OCIObjectNew on not only the main ST_ANNOTATION_TEXT type but also for the ST_ANNOTATIONTEXTELEMENT_ARRAY, ST_ANNOT_TEXTELEMENT_ARRAY, and the ST_ANNOTATIONTEXTELEMENT?
I can't seem to find in info on this so hopefully someone else has been through this.

user3068343 wrote:
I am still having an issue where the sub objects are still NULL.Actually I was mistaken. I must have confused getting an Object from OCIObjectNew with using one of its constructor method in a statement.
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28395/oci18nav004.htm#sthref3438 clearly state the object will have NULL attributes, unless the OCI_ATTR_OBJECT_NEWNOTNULL flag is set on the environment handle.
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28395/oci11obj.htm#i446308 further tells you what the default value for the object members will be.
An older 9i doc http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96594/adobjadv.htm#1008774 also warns about resetting the indicator struct member when you update a member of the object.
user3068343 wrote:
++a) you allocate the object's top-level struct yourself (SDO_GEOMETRY in my case) in C+++
Above you suggest creating the objects top-level struct myself. How do you create that top level object? I have been using OCIObjectNew on that object as well as its sub objects? Is that how you are creating the top-level object?This technique works only on binds, as objects you get back from defines are always allocated from the object cache. I create the top-level object directly on the stack... This is something I discovered worked, but is not documented, so you're probably on safer ground using OCIObjectNew instead.
BTW, the reason I can't easily post OCI example code is that my code uses wrappers around the objects that hides most of the OCI:
Geometry Geometry::make_point(OCIEnv* envhp, OCIError* errhp, float x, float y) {
    Geometry point_geom(envhp, errhp);
    point_geom.set_null(false);
    point_geom.gtype() = 2001;
    PointRef point = point_geom.point();
    point.set_null(false);
    point.x() = x;
    point.y() = y;
    return point_geom;
}The above creates an 2D point-type SDO_GEOMETRY hidden inside the Geometry class, itself deriving from a GeometryRef class. The latter wraps a C++ API on top of the struct pointers for a SDO_GEOMETRY/SDO_GEOMETRY_ind, while Geometry actually composes the OTT generated value/indicator structs by value, and passes addresses to its nested structs to GeometryRef (its parent class). So GeometryRef can manipulate an object irrelevant of where it was allocated, the stack or the object cache. The Geometry class is a value class, but it's useful for binds only, and like I said uses a behavior which appears to work but is not explicitly documented.
Unless you have nested objects by reference, nested objects are composed by value in the OTT-generated structs, so the space for all nested objects is already allocated after the first OCIObjectNew. But the members themselves are not initialized, and thus marked as null in the indicator struct.
In the code above, my Geometry instance is fully allocated (on the stack), but fully uninitialized (the indicator is by default set to all nulls). I first set the atomic flag to non-null, then get the Ref wrapper around its nested SDOPOINT_TYPE to also set it to non-null, and fill in the x/y member (via another NumberRef wrapper, which knows about the member and the indicator for that member, and sets it as non-null when assigned to). Notice how how I return the instance by copy: My point geometry instance doesn't have a pointer-aliasing issue here, only because its two OCIColl* are null. In the general case, you can't copy my value wrappers without making a true deep copy... But I'm getting into the weeds here.
The important point is that OCIObjectNew doesn't init the nested objects unlike what I stated earlier. Sorry for misleading you on that. --DD

How can I enable the Special Stock Indicator in the source list?

Hello Gurus,
How can I enable the Special Stock Indicator in the source list? This can be found in the Maintain source list detail screen, source group and beside the order unit. Even I am in the create or in change mode, still the indicator can't change
Thanks!

OSS note 668764 explains that the special stock indicator field is a display only field and cannot be changed in the source list. it is only taken over from a scheduling agreement.

How do you create Inspection Characteristics?

Hello there,
I had a question.. How do you create Master inspection characeteristics?
Is there a specific Tcode for this?
Are any other assignments needed for this?
Any help would be highly appreciated.
Sincerely,
Aji Kurian Mani

Hi,
You can create Master Inspection Characteristics ( MIC ) with T-code QS21 or use this path
SAP Menu-LogisticsQuality ManagementQuality PlanningBasic DataInspection Characteristics--Create(QS21)
1.Goto T-code QS21
2.Enter Plant & desired code for MIC,then Enter.
3. Here tick for Quantitative Characteristic or Qualitative Characteristic.
4.Maintain control Indicator,catalog,Inspection method,Status,short text,search field.
Then Assign MIC in inspection plan.
Regards.
Raja.

How do you create a 2-d array%3F

How do you create and write a 2-d array?? I have two operations in the same WHILE loop. Each execution of the loop should generate a new pair of values.
However, the BUILD ARRAY function only outputs a 1-d array to the WRITE TO SPREADSHEET FILE.vi.
Perhaps, more broadly, how does one put data into a 2-d array as it is collected? I think I am building two arrays simultaneously below, but, what I really want is to build a single 2-d array. Is this how you would do it? It looks clumsy connecting sequential BUILD ARRAY's together. Is this creating a 2-d array that I can search later by index and return the paired data?
Lastly, why does my front panel indicator only show data in the first column?? How do I make it display the data as it is collected across the rows?
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
forum dec 12_2012 build 2d array.vi ‏13 KB

dav2010 wrote:
Sorry, very simple minded here...how do pairs go as a 1-d array? I thought that (x,y) data must be a 2-d array...a column of "x's" and a column of "y's"? Wouldn't a 1-d array just be all x's? I admit I'm pretty new to understanding arrays.
" build your 1D array from both scalars" --> how do you do this?? I cannot find a "convert to scalar" on the pallette.
Also, here is the vi saved down to 2009, I think.
Dave
Here's a simpler way, just write out your X and Y as a 1D array each iteration. The Write will append your data as a column of X's and a column of Y's:
or generate all your values and then write once:
(fix the broken wire).
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

How can I create JScrollPane in my swing application with scroll bars movin

Hi,
How can we create scrollpanes moving with scrollbars.I tried many times with custom layout.but it does not work if i set custom layout.I hope that I will get my problem solved.
Thanks and Regards,
Rameh RK

This means it is not possible to create a pure unicode file without the byte order mark?
You wouldn't happen to know how a file with byte order mark should read on a Linux system?
Or if this possible or not?
Regards
Christian

How do I create an artificial horizon indicator?

Similar Messages

Maybe you are looking for