How do i cut out high frequencies?

Im fairly new to recording so i apologise for what might seem like a silly question.  Ive imported an acoustic guitar track which i have recorded in cubase to audition.  The only problem is that it has a very annoying bleeping metronome sound which you can hear at the start and at the end of track.  How do i get rid of, or at least minimise this coming through in my final recording?
Thanks

Well, IF there's a solution (see below for why it's an "if") I'd start by trying some EQ with a notch filter.
If you're not up on identifying frequencies by ear, highlight one of the metronome "beeps" and run Audition's frequency analysis tool (under the Window menu by the way) to tell you what frequeny you need to get rid of, then got to Effects/EQ and Filtering/Notch filter.  Set up the frequency you need with a lot of attenuation and go.
However, I say "if" because it's pretty common for beep noises not to be a nice, easy single frequency.  They're often a mix of several different frequencies and, the more you have to notch out, the more of your music disappears too.
Good luck.
Bob

Similar Messages

  • How do you cut out the part of an image in a photo?

    How do you cut out a part of an image on a photo that you have added to Pages. For example, if I have added a picture of a giraffe to Pages how would I cut out the giraffe from the image and get rid of the rest of the image

    You can use the instant alpha tool to make the background transparent.
    FYI: Pages is part of iWork, not iLife.

  • How do you cut out exact figures?

    When I use the lasso tool to carve out a figure and paste it in some other application I get the the figure I cut embedded in a white box. How do I just cut and paste only the figure?

    Thanks that worked!
    Date: Sun, 27 Jun 2010 20:31:25 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do you cut out exact figures?
    System clipboards can be finicky, to say the least.
    Also which operating system and application do you want to paste into?
    The following may help:
    1. With your selection active around your object, right click inside the selection.
        In the menu choose New Layer via Copy. (makes a new layer with just your
        selected object)
    2. Right click on the new layer in the layers pallete and choose Duplicate Layer.
        In the dialog box, where it says document choose new from the drop down menu.
        You can name it or not. Click ok.
    3. A new document should be created with just that layer.
    4. Depending on how big the document is, you could use the Rectangle Marque Tool
       (M on the keyboard) and draw a selection box around your object and then go to
       Image>Crop, then Select>Deselect.
    5. Save your image as a PNG file. File>Save As and choose png from the drop down.
        It should say File must be saved as copy, thats fine.
    6. Open or insert your png into the application of choice.
    MTSTUNER
    >

  • How Do I Cut Out?

    Please can somebody tell me how to take a photo - cut out an object in said photo - and have the newly cut object be its own new entity?
    I just want to cut stuff out of existing photos...I used to have an old Photoshop where I did lots of this - but none of those tools seem to be part of this new version I have...
    please help!!

    You have to make a selection.  The tool many use is the quick selection tool.  Then click refine edege box in tool bar to adjust.  Then use ctrl C to copy and ctrl V to paste.

  • How do I cut out imported objects and make background transparent?

    Illustrator CS3.
    I have embedded a jpeg picture which I need to cut out and make the background transparent. How do I do this? An opacity mask? How do I create a mask the same shape as the object I need to cut out? The object needs central pieces cut out too. Please help!

    Opacity mask of clipping path are the two ways to do this in Illustrator. Photoshop is the ideal program for this task.

  • How do i cut out a car in Premiere Pro CC?

    So i'm making this short film with some friends and i one of the scenes one of my friends needs to get run over by a car. But we filmed it in a stupid angle so i couldn't use linear wipe. I thougth you then just could cut out the car and add some feather to it. But i've searched on Google and Youtube for answers but can't find anything that can do that.
    Is there anyone who knows if there is such an effect in Premiere pro?
    It would help me out alot.
    Thanks!

    In PremierePro stnadlaone, you might be able to do it with some sort of matte:
    Try out three keying effects | Adobe Premiere Pro CC tutorials
    and then use the masking and tracking controls to key out pixels as needed and then track them through the shot
    Adobe Premiere Pro Help | Masking and Tracking
    Or, better yet, use After Effects.:
    After Effects CC tutorial: Rotoscoping with paths | lynda.com - YouTube

  • How do you cut out a part of an audio recording?

    Lets say I recorded a guitar solo but the last note of it didn't sound to good. I want to cut this one little portion of the audio recording off. How would I do this? I've tried double clicking the audio strip, highlighting the part to cut, and pressing delete but sometimes it completely changes the position of the track in the sequencer. Please help me out. Thanks a lot!!!

    RyConn M.D. wrote:
    Lets say I recorded a guitar solo but the last note of it didn't sound to good. I want to cut this one little portion of the audio recording off. How would I do this? I've tried double clicking the audio strip, highlighting the part to cut, and pressing delete but sometimes it completely changes the position of the track in the sequencer. Please help me out. Thanks a lot!!!
    Hi,
    From your post, I see that you are very new to audio recording on a computer.
    I HIGHLY recommend you buy a book on this subject. There are many out there, I suggest this one
    Logic-Pro-Power by Orren-Merton
    I had the one for version 5, and it is very good.
    Cheers

  • How do I cut out a shape within an object in Photoshop?

    I have a circle and want to cut an X with rounded corners out of the circle.
    How do I do this?  In Illustrator I just lay an object on top and subtract it from the image below w/ Pathfinder.
    Again how in PHotoshop?  Mask?  if so I read up on masking but I don't see that exact explanation.  Any help would be appreciate.

    If you want to use paths just create the Path with any of the Path Tools or paste it in from Illustrator and invoke Layer > Vector Mask > Current Path (or command-click the Layer Mask icon at the bottom of the Layers Panel).
    Negative Vector Masks have to be set for the selected Path-elements in the Options Bar accordingly.

  • How should I cut out people on bicycles with a background of a forest?

    Dear Everyone,
    I have an image of three people on bicycles in a forest - I need to cut the people/bicycles out of the background for use in a photo collage. Since the nooks and crannies in and around the bicycle are so small, I am not sure that even the pen tool is the best method to use. What do you suggest?
    Thanks so much!!
    Chava Drummond

    Could you post a lores-version and maybe a fullres-detail (with the camera icon)?
    Clipping intricate stuff out of a richly structured background (as wood probably is) is usually a difficult task, but seeing the image might give a better idea of how bad the situation is.

  • How do I cut out a scene

    I have just got my MacBook and am trying out my iMovie.  I have the disadvantage that I cannot access the help menu through my iMovie program.  I have spoken to Apple and they have tried a lot of things and it cost a lot of money, but I still can't access it.
    I have some clips that have a lot of "dead" scenes which I would like to remove.  Can anyone tell me how to remove a part of a video so that I only have what I want? 
    Ria

    Englishteacher wrote:
    ...  I have some clips that have a lot of "dead" scenes which I would like to remove.  Can anyone tell me how to remove a part of a video so that I only have what I want? 
    editing is vice versa:
    you choose the scenes you want
    select in your Event the part(s) you like and add to your Projects.
    best: start here, watching the tutorials:
    http://help.apple.com/imovie/index.html#button-0

  • How do i cut out a circle?

    i want to remove the background and shadow from a picture of a football, how do i do it so i am just left with the ball??

    This sounds like a question about  general Photoshop CS5 use.  This forum is for people using the FXG  feature with Flash Catalyst.
    I recommend you post this question to one of  the more general Photoshop forums:
    http://forums.adobe.com/community/photoshop
    as per:
    blues4junior

  • How can I cut out paths with another path and just leave short paths (pic examples inside)

    Ok, so we start with this... the "S" is a path (the "S" is just used for example here but could be a star, a heart or even something more complex.
    Then I need to end up with this:
    This was done with clipping mask but that only gives me the "look" I want, not the end results I want.
    I need EACH of those lines to be an independant path that can be manipulated individually later.  So like the 4th row from the bottom would be two separate paths.
    Does this make sense?
    What is the best way to achieve this?

    JustyCase,
    With the horizontal paths on top, you may:
    1) Select all the horizontal paths, Object>Path>Outline Stroke (if they are not outlined to closed paths already), and Object>Compound Path>Make,
    2) Also select the shape to cut up and Pathfinder>Minus Front (hold Alt/Option if needed to make simple paths).
    This should leave you with a Group of simple paths as desired, with no trash.
    Edit:
    Busy with some urgent matters all day, I thought I had reloaded the thread before posting. I never saw posts # 9, 10, 11, 12, 13, 14, & 15, until now. Argh.

  • How do I cut out an image from one photo and paste it in another photo?

    Help!  I did use the scissors and eraser tool to cutout unwanted background, and now I have an image I want to save and copy to another photo.  The problem is that Elements 11 won't let me open up another photo at the same time, or let me copy the selected image to clipboard to paste on a different photo.  Adobe's  info. on how to do this seems to be sketchy.

    Try this:
    Open photo B, the one that you want to add an object to. Minimize this.
    Open Photo A, and using one of the selection tools, e.g. selection brush, lasso tool, make a selection of the object that is to be transferred to B. You will see "marching ants" when the selection is complete.
    Go to Edit menu>copy to place the selection on the clipboard
    Go back to photoB
    Go to Edit>paste
    With the move tool, position the object and resize with the corner handles of the bounding box.

  • How do I cut out a part of a video file?

    I just want to trim off 20 min. of my video that I don't want at all at the end of my movie then burn it to DVD? Please help I'm new at this. Thanks

    Michael0320 wrote:
    I just want to trim off 20 min. of my video that I don't want at all at the end of my movie then burn it to DVD?
    • select the part you want on DVD
    • add to a new project
    • share to iDVD
    http://www.apple.com/ilife/tutorials/imovie/index.html

  • How do I cut out the vocals and keep the instrumentals

    I recorded a track and I just want to keep the instumentals and discard the vocals. Is there a way to break it down and just discard the vocals and keep the instrumentals?

    From a professionally recorded stereo recording (that's not what you originally said) you can possibly reduce the vocals
    http://www.thehangtime.com/gb/gbfaq2.html#removevocals
    A better option would be to find a MIDI file of the song you want.

Maybe you are looking for