How do I determine why my spotlight folder is so huge?

I have about 700 GB of files on a 3 TB hard drive. The .Spotlight-V100 folder is 450 GB in size. I have re-indexed the drive. How do I figure out why the index is so huge?

Never mind. It's the DC-In board because it boots on the battery. No charge light when plugged in. One of the hardest installs but, what the heck. I love a good challenge.
Thanks

Similar Messages

How do I determine why yosemite will no longer shut down?

This is a new problem, not occurring after installing Yosemite. Now my iMac will not shutdown it just has that spinning icon that will go on forever unless I hold down the power button. How do I determine what is causing it?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Outlook 2010 Moves message directly to Deleted Items - How can I determine why this has happened?

Has anyone see this before? – using a PHP script to send mail (uses SMTP authentication). For me it works perfect, for my client (who has Outlook 2010) the email goes direct to the Deleted Items folder. I’ve not seen that behaviour before.
I have Outlook 2007 and it seems fine on that.
Email is plain text, from address is in ‘Always allow..’ list – there is a ‘Reply-To’ header which is set to the email of the contact which is different to the ‘From’ and ‘Sender’ headers which are
set to the clients email address. The conversation has not been 'ignored'.
To muddy the water, script is installed on another server and it works fine from there to my client.
Is there anyway of determining how Outlook 2010 recognises what is Junk and what is not?
Any ideas?
Thanks
Adge

I have the same problem - user has Outlook 2010 on Exchange 2007. Mail goes directly into the deleted items folder. After browsing around the net I found 2 different site with the same potential fix. It seems that when migrating a user from Exch 2003 to
2007 (which we did) some of the configs get set incorrectly. The weird thing is we migrated over 2 years ago, and some others are experiencing the same after a long period after the migration. The fix that was suggested is:
Go to your Exch server, open up Exchange Management Shell and type the following:
get-mailboxcalendarsettings "domain/ou/user" | fl
set-mailboxcalendarsettings "doman/ou/user" -automateprocessing: Autoupdate
My user already had Autoupdate set, but this seems to have fixed it for me...

How Can I Determine the Size of the 'My Documents' Folder for every user on a local machine using VBScript?

Hello,
I am at my wits end into this. Either I am doing it the wrong way or it is not possible.
Let me explain. I need a vb script for the following scenario:
1. The script is to run on multiple Windows 7 machines (32-Bit & 64-Bit alike).
2. These are shared workstation i.e. different users login to these machines from time to time.
3. The objective of this script is to traverse through each User Profile folder and get the size of the 'My Documents' folder within each User Profile folder. This information is to be written to a
.CSV file located at C:\Temp directory on the machine.
4. This script would be pushed to all workstations from SCCM. It would be configured to execute with
System Rights
I tried the script detailed at:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/03/31/how-can-i-determine-the-size-of-the-my-documents-folder.aspx
Const MY_DOCUMENTS = &H5&
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(MY_DOCUMENTS)
Set objFolderItem = objFolder.Self
strPath = objFolderItem.Path
Set objFolder = objFSO.GetFolder(strPath)
Wscript.Echo objFolder.Size
The Wscript.Echo objFolder.Size command in the script at the above mentioned link returned the value as
'0' (zero) for the current logged on user. Although the actual size was like 30 MB or so.
I then tried the script at:
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Script/Q_27869829.html
This script returns the correct value but only for the current logged-on user.
Const blnShowErrors = False
' Set up filesystem object for usage
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
' Display desired folder sizes
Wscript.Echo "MyDocuments : " & FormatSize(FindFiles(objFSO.GetFolder(objShell.SpecialFolders("MyDocuments"))))
' Recursively tally the size of all files under a folder
' Protect against folders or files that are not accessible
Function FindFiles(objFolder)
On Error Resume Next
' List files
For Each objFile In objFolder.Files
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:01", objFolder.Path
On Error Resume Next
FindFiles = FindFiles + objFile.Size
If Err.Number <> 0 Then ShowError "FindFiles:02", objFile.Path
Next
If Err.Number = 0 Then
' Recursively drill down into subfolder
For Each objSubFolder In objFolder.SubFolders
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:04", objFolder.Path
FindFiles = FindFiles + FindFiles(objSubFolder)
If Err.Number <> 0 Then ShowError "FindFiles:05", objSubFolder.Path
Next
Else
ShowError "FindFiles:03", objFolder.Path
End If
End Function
' Function to format a number into typical size scales
Function FormatSize(iSize)
aLabel = Array("bytes", "KB", "MB", "GB", "TB")
For i = 0 to 4
If iSize > 1024 Then iSize = iSize / 1024 Else Exit For End If
Next
FormatSize = Round(iSize, 2) & " " & aLabel(i)
End Function
Sub ShowError(strLocation, strMessage)
If blnShowErrors Then
WScript.StdErr.WriteLine "==> ERROR at [" & strLocation & "]"
WScript.StdErr.WriteLine " Number:[" & Err.Number & "], Source:[" & Err.Source & "], Desc:[" & Err.Description & "]"
WScript.StdErr.WriteLine " " & strMessage
Err.Clear
End If
End Sub
The only part pending, is to achieve this for the 'My Documents' folder within each User Profile folder.
Is this possible?
Please help.

Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

Create a smart collection with criteria "collection" and "does not contain"; and also with criterion Folder contains (or folder contains all)
That works if you are thinking about a specific named collection.
If you are interested in finding photos that are not in ANY collection, the usual trick is "collection" "does not contain" "a e i o u y"

Why is the folder strukture based on the import date, and not on the Creation date? How can i setting this?

Why is the folder strukture based on the import date, and not on the Creation date? How can i setting this?

What folder structure?
If you're referring to how Aperture stores the originals in a managed library then the answer is you can't change it.
If having the originals stored in a specific file structure is important to you you will need to switch to a referenced original setup.

Why is spotlight not finding files in a folder (I know the files are there)

I've been having trouble with spotlight. I've done all the possible means of resetting spotlight folders via pref pane and via command line. Either way I go about it spotlight is not working properly.
My test for this is to search in folder for a file I know is in there. But, spotlight in finder isn't finding the file. Why? What prevents SPotlight in FInder from seeing files that are there? None of my drives are in the privacy section of the spotlight preferences.
Leopard 10.5.6 Mac Pro

this is certainly not normal. it looks like spotlight indexing is choking on something. if this continues you should probably stop it. look in the console log. there may be a record of what it's choking on. you can try deleting the hidden spotlight folder at the top of the drive. this will restart indexing and delete all the current spotlight data. if it keeps doing this I don't really know what to suggest. you can try excluding various folders on the drive from spotlight to see if you can isolate where the problem is.

How can I determine which computer a share is connected to in /Volumes from terminal or a script?

I run a set of virtual machines via Fusion on an iMac that we run automated tests on for our website. There is a folder on each VM called /Automation that is shared.
I have a python script that runs on the host, that will find an open VM, start it up and then mount the VM's /Automation folder. So if there is only 1 VM powered on, the folder shows up in /Volumes as /Volumes/Automation. The problem is when there are 2 or more VM's powered on, because then the shares start being named /Volumes/Automation-1 and Automation-2 etc. So my question is, how can I determine which computer each share belongs to from terminal or a script?
In other words, I'm looking for something like:
/Volumes/Automation = "FirstVirtualMachineName.local"
/Volumes/Automation-1 = "SecondVirtualMachineName.local"
Is there any way to determine which computer a mounted share is connected to? In the past, I've just unmounted all /Automation folders, and then mounted them in a particular order, but that's unreliable and messy in my opinion. If anyone knows a better way, please let me know. Any help is appreciated.
Thanks,

Well I think I have a workable solution. It's not perfect, but I think it will do the trick. I can put a spotlight comment on the folder similar to 'HostName=OSX-Automation-1.local' and can then retrieve that value from our server with the following python snippet:
import subprocess
out,err = subprocess.Popen(['osascript','-e','tell application \"Finder\" to get comment of \"Macintosh HD:Volumes:Automation-1\"'],stdout=subprocess.PIPE, stderr=subprocess.PIPE).communciate()
So I could just loop through each 'Automation*' folder in /Volumes and grab the name from the spotlight attributes on the directories. I don't think I really need to worry about the comments being overwritten, but I may have one of our launch daemons that run on the VM check that spotlight comment once a minute or something to ensure that the correct value is there.
If it ends up not working well in practice, I'm going to give your suggestion about a config script a shot. It would require a little more up front work, but seems as if it would be pretty solid after that.
Thanks again for helping me think it through

Mid-2010 27" iMac with i5 - process for determine why slow

I have a mid-2010 27" iMac with an i5 processor and 12 GB of memory running latest Maverick OS. I mainly use the computer for email, web browsing, light weight spreadsheets and importing/organizing/sharing photos. I understand why my computer would be slow on startup (with reloading Safari pages, updating notifications, updating email, updating iMessage, etc.) but more and more often I see the spinning ball while using the computer. I have run though the basic steps of fixing permissions, etc. and would like to understand what is limiting my computer's performance. A few other things to note...
I have 12 GB of memory (the original 2 GB x 2 and I've added 4 GB x 2). I have heard that mixing memory isn't best.
My 1 Tb hard drive is at 80% capacity. I have heard that ideally this would be lower.
How do I determine what is causing my slowness? Is there a way of finding out which programs are demanding memory and by how much? I have read that my iMac can offically support 16 GB memory and unofficially support up to 32 GB. Not sure if 12 GB is a limiting factor or not. Just looking to get another year or so from this computer without getting frustrated watching the spinning ball. Would a fresh install of Marvericks and then reloading my personal stuff improve the situation?
Thanks in advance!

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

How Do I Determine What WUDFHost.exe is Doing and What It's Associated With?

Since around the time of the installation of Win 8.1 Update 1 I've had a couple of new WUDFHost.exe processes that run all the time. Today I saw one of them accessing data on a backup volume, which I assume was some kind of maintenance
activity - but I'm not sure.
My question is this:
How can I determine what these processes are doing, why they're here, and what they're associated with (i.e., what feature or device has caused them to be running). I don't suspect them of causing a specific problem - my system's running fine
- but I want to know why they're running.
Process Explorer shows them to have been started by these two command lines:
"C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-ae18c507-xxxx-xxxx-xxxx-ce7a84b73fb2 -SystemEventPortName:HostProcess-76f2d2b0-xxxx-xxxx-xxxx-25de41b0af65 -IoCancelEventPortName:HostProcess-52988628-xxxx-xxxx-xxxx-54018fc05bec
-NonStateChangingEventPortName:HostProcess-c981e37e-xxxx-xxxx-xxxx-a8bd344c5791 -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:8472fac1-xxxx-xxxx-xxxx-680353bbbc7f -DeviceGroupId:WpdFsGroup
"C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-af2e6f5b-xxxx-xxxx-xxxx-39a9cc13f6d4 -SystemEventPortName:HostProcess-45e89330-xxxx-xxxx-xxxx-9e76811e37aa -IoCancelEventPortName:HostProcess-3007f65c-xxxx-xxxx-xxxx-c6cdd5617944
-NonStateChangingEventPortName:HostProcess-efca4373-xxxx-xxxx-xxxx-cfc06fd83dee -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:f4aa6ef0-xxxx-xxxx-xxxx-d16f4eefddb2 -DeviceGroupId:WudfDefaultDevicePool
As you can see, their function isn't obvious from what's showing.
What tools can I used to delve further into what these are and why they're here?
Thanks for any help or wisdom you can offer.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

seems to me that you're about to dive down a rabbit hole for this one..
http://en.wikipedia.org/wiki/User_Mode_Driver_Framework
http://msdn.microsoft.com/en-us/Library/Windows/Hardware/ff557565(v=vs.85).aspx
http://blogs.msdn.com/b/iliast/archive/2009/06/09/umdf-debugging-videos.aspx
might need to ask more in the driver dev forums?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do I manage photos using a folder - subfolder type structure?

How do I manage photos using a folder - subfolder type structure as I have done previously within Windows? For example, my photos were stored with a folder for each year and sub-folders for each month whicheach held the photos. Can I do this in iPhoto?

For example, my photos were stored with a folder for each year and sub-folders for each month whicheach held the photos
Why bother?
Check out the search box at the bottom of the Window. (Click on the Magnifying glass, it opens it) Now click on the mgnifying glass in the search box) and select 'Date'. Now you can find all the photos from any day, month or year. If you want to find the photos from a range - say a paticular week - then you can do that with a Smart Album.
Organising photos by date means you have to remember the date the shot was taken, and after a while, and after a few thousand shots, this gets harder and harder to do, so you spend more and more time rooting through folders.
iPhoto offers a range of organising tools and each offers more possibilites to quickly find the shot you're looking for. For instance:
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums extensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 45k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.

How can I determine how many events are in my calendars?

The web version of my iCloud Calendar and subsequently also my Calendar.app did show recently various malfunctions and error messages that were inconsistant. Also, Calendar.app crashed when I was editing events. Finally, Calendar.app did complain that my iCloud account would be out of quota, and did direct me to this KB article:
http://support.apple.com/kb/HT4489
I did not know about these quotas before which are not really high and quite limiting for use over longer periods of time. After checking them, I think that my real data are below these limits. However, there might be one exception:
- Total number of calendars, events, and reminders: 25,000
25,000 sounds a lot, but when you devide by 6 events per day (which is easily reached if you combine family and buisness, and maybe repeated events also count for each repetition at least after editing), one ends up at 4200 days which is not much more than 11 years. I am using Calendar with data since the year 2000 (for some time I used Palm Desktop that took over the (very) old Mac Calendar application and imported/moved the data when iCloud Calendar became available).
My questions:
- how can I determine the number of events in my calendars?
- which events do count in which way for the quota limit?
- what about events from shared calenders - do they count if owned by another account?
- what about repeated events which are partially edited?
Thanks in advance for any hint!

Hi there
I ran into the same problem last year. The solution I used is available here:
http://forums.macrumors.com/showthread.php?t=1693875
Apple don't seem keen to tell you you've reached your limit and if you think that isn't helpful tough luck. I reached due to duplicate events being created. I didn't know what had happened until I eqnuired further on the above forum. Someone needs to create an event counter application. Perhaps they have. Would need to do a search.
However I've now reached the limit again and I'm not sure why, cue more faffing around being required. That's one of the problems of using a Mac computer with an Android phone.
As for the limit, it exists and if you dont like it you need to change the way you work not Apple. That's the impression I get. Alternatively use something else that has more generious limts. I don't know what that would be. I did consider moving my calendars to Google but it would have meant certain functionality would not work in BusyCal, the third part calendar application I use on my Mac computer.

How do I determine what my early termination fee will be?

My phone broke last week. The ear piece is distorted but it still works using a headset. I went into the store to see about fixing it. The don't work on LG Chocolates and I was told the replacement is an LG Extravert. I inquired about getting a new phone and using the value of the Extravert towards the new phone but was told they don't do that. I have been paying insurance on my phone for a couple years now and thought that meant I'd get a phone that was as good as my Chocolate. (removed) Since they would not work anything out with me(a 15 year customer with a family of 4 plan), I had them send me the Extravert. The store clerk said it was going to be there the next day. Apparently next day means over-the-weekend. So I was out of town the beginning of the week and didn't get to open the box until yesterday. The Extravert came incomplete with no battery nor back. It is also clown-red. The specs show it is clearly not an equal replacement for my Chocolate. Whatever... Anyway I got to argue with 2 Verizon reps on the phone about how it was not an equivalent phone for about an hour at one point being told that i had the option of selling the Extravert back to them for, much to my chagrin, $1. I pay $6 a month to insure my phone and they will send me a phone they value at $1!. I asked how much they would sell me the Extravert for and the rep said around $175! So you can probably see why I am not a happy customer. 15 years of loyalty and they can't do a thing to help me and don't seem to care. I realize it is not the person I talk to on the phones company and I am just one person so I am small potatoes. Again, whatever... So after the frustration of the last week, I have decided I need to end my relationship here and move on. So after venting, how does Verizon determine the early termination fee? Thanks in advance for your responses and a big no-thanks to Dorothy (removed) who was one of the exasperating folks I got to argue with for an hour yesterday...
Edited as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

You can't cancel service online. However, if you are moving to another carrier, start service with them and port your number - that will initiate the cancellation from Verizon. You also have to have an active line of service to port your number; if you cancel before starting service with someone else, your number is lost.
Backdating an increased data allowance is preferable and allowed - prorating is why you can't backdate a reduction. It will most likely result in overages in a majority of situations, defeating the purpose of the reduction, so it is simply not possible to do. The reduced allowance will take effect the next billing cycle.

How do you determine what shows are in free video on demand?

How do you determine what to include in the free on-demand shows? The Mentalist was always there before but is no longer. This is especially important for shows like the Mentalist and The Good Wife which come on Sunday nights after sports events. Even if I set my DVR to record 60 minutes over it doesn't always catch the entire episode. Would also like to see Person of Interest there. And last but not least, you should have a way for people to access netflix or other services from your service.

If you go to BROWSE then the FREE folder you will find that everything in there is free viewing. If you go elsewhere and try to watch a paid show, you will get a prompt asking you to purchase. It also shows the amount of the movie before purchase.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

How do I determine why my spotlight folder is so huge?

Similar Messages

Maybe you are looking for