How do I generate documentation for a sequence file hierarchy?

I am trying to generate documentation for all of the sequence files used in my test suite. Some of the tests are kinda complex with nesting to eight to ten levels with hundreds of sequence files. The sequence file documentation tool will only let you document the active sequence file and there doesn't appear to be any way to recursively search for the sequence files in LV or TS. Does anyone have a way to do this?

Hi lars,
For each sequencefile you will need to create a reference to it by use of the Engine.GetSequenceFile() method.
Next create a new context by using the SequenceFile.CreateNewContext(), use the SequenceFileObj reference returned by the GetSequenceFile() method.
Once you have the SeqenceContext reference, use this as the parameter to the second step which calls a dll in docgen.seq, (sorry can not remember what is called at the moment). The at the moment this parameter is ThisContext reference. Probably best to make a copy of this sequencefile (docgen.seq) and make the modification to the copy.
On the second step, open up the specify module dialog and change the ThisContext to your new variable holding your new SequenceContext. Close the sepecify dialog.
Some where in your cleanups you will need to set the New Sequence Context to Nothing and call the ReleaseSequenceFile() method passing it the sequencefile reference. Releasing the reference to the sequence file maybe a bit tricky because if the engine is still using the reference, then it will not be released.
I have tried this and it did generate a document of a sequencefile not previously loaded. My only problem was releasing the sequencefile.
I am not suggesting that this is a usable solution, because you wouldn't want the dialog window opening up for each sequence file. This maybe a starting point for you.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

How to create a documentation for Badi?

Hi All,
how to create a documentation for Badi?
This step is requested in the OSS note, but not explained how to perform it...
Thanks and regards,
Alex.

Hi All,
solved. created in SE18
I noticed, that it is also possible to create such documentation in SE61 *** well,
Document Class Implementation Guide chapter (SIMG)
Chapter SIMG
Also the translation of documentation could be done in such way:
SE63--->Translation--->ABAP OBjects--->Transport object:
R3TR DSYS SIMGbadi_name_goes_here
Regards,
Alex

Generate Documentation for all components in a project

Hi there,
V12.0.8 -- Is there a way to generate documentation for ALL transactions in a project at once. Instead of having to open each one individually?
Thanks,
--Amy Smith
--Haworth

Amy,
No there isn't but it's a good suggestion and I will add it to my list of feature requests.
Sam

How to write professional documentation for java

Hi, I have few application I need to write documentation for. Im ok with the user and serwer technical stuff. But how to write proper documentation for source code? Any tutorial or howto?
Best regards.

Phenom7 wrote:
Hi, I have few application I need to write documentation for. Im ok with the user and serwer technical stuff. But how to write proper documentation for source code? Any tutorial or howto?A pointer: be explicit and specific when writing Javadocs. If your method never returns null, make sure you say so. If it can't accept null as a parameter, be sure to say what the consequence will be if it happens (but it's OK to say the result is undefined!). A well-written method Javadoc will make users of any API you make a lot more happy, rather than keeping them guessing or making them inspect your source code.
It's expected that while the implementation of a method will change, its pre and post-conditions will not. Therefore, having a good method-level Javadoc is critical to both the people counting on your code and the people maintaining your code.

Property Loader - How to set it up for all sequences?

Hi,
I made an attempt to use the property loader for the first time. (TS3.5).
I set it up in the setup section of the SequenceFileLoad and specified few parameters of the FileGlobals.
What happened was a proper operation for the SequenceFileLoad sequence, but as soon as the procedure stepped into the MainSequence, the values return to the original values. I repeated the process with and without import to Run-time sequence only' and it behaved the same.
Is there a way to set it up so ti will apply to all sequences within my sequence file and also to the external sequence files called from the main sequence. In short to replace the parameters of the FileGlobals for the duration fo the test.
Thanks
Rafi

Rafi,
The behavior you are seeing with the SequenceFileLoad engine callback is expected. The SequenceFileLoad callback occurs before the Sequence File is actually loaded. In your case, you are setting the FileGlobals then loading the SequenceFile. When the Sequence File is loaded by the engine, the FileGlobals are also loaded in with the file. So the FileGlobals are reset to their default values. If you want to set the FileGlobals from the property loader, put the Property Loader step in the Setup group of the MainSequence. In this case, you are setting the values of the FileGlobals after the Sequence File is already loaded.
FileGlobals only have a scope that covers a SequenceFile. You will not
be able to load FileGlobals that are accessible to sequences in
external sequence files. You have a few options for getting the data into the external sequences:
(1) Add parameter variables to the Parameters section of each external sequence. When the sequence is then invoked, you can pass the data which will be used by the sequence. This provides the proper data dependency between sequences and avoids confusion on when the data is being initialized.
(2) For each Sequence File or each Sequence, create a separate property file. When each sequence is called, then use the Property Loader step to load in the data.
(3) Use StationGlobals instead of FileGlobals. StationGlobals have a scope that covers all SequenceFiles on a test station. However, this is not a recommended method, because the data is accessible to all sequences. For large applications, it is easy to mistake points in the sequences where data is being initialized and used. In these cases, you may expect the data to be a certain value that it isn't because another Sequence has already changed the data values. That is why it is better to use smaller scoped data variables.
Let me know if you have any further questions.
Thanks,
Tyler T

How can I generate and/or retrieve log files from iPad

How can I generate and/or retrieve log files from iPad?
OBS!
There are NO files apearing in ~/Library/Logs/CrashReporter/MobileDevice/<name of iPad> so where else can i find it?
I want to force it to produce a log, or find it within the iPad.
It is needed for support of an app.

Not sure on porting out the log data, but you can find it under General->About->Diagnostic&Usage->Diagnostic&Usage Data. It will give you a list of your log data, and you can get additional details by selecting the applicable log you are looking for. Hope this helps.

How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?

How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?

"adrianTNT" <[email protected]> wrote in message
news:e6aitv$hkm$[email protected]..
>
quote:
Originally posted by:
kglad
> you're welcome. with your solution loading another mp3,
are you sure it stops
> the download of the first mp3?
> Yes, it seems to work fine, it loads another sound in
same sound (my_sound)
> and it seems to replace loaded progress with the empty
sound I gave and stops
> previous loading.
> I look at traffic icons on task bar and I see that there
is no network traffic
> after I click "stop" before this I could see continuous
traffic while sound was
> loading in background.
Yeah, I remember someone posted that solution a long time
ago. It seems if you load a file with the same name the cache
doesn't
know any better and adjusts the download size to the smaller
one. Maybe it's a good way to do it! Could it be a way to remove an
mp3 from someone's cache after it plays? hmmmm Will have to
do more testing.
tralfaz

How I can make actions for write the file name in front image

Hello All
How I can make actions for write image(file) name in front the image automatically in photoshop cs3.
Thanks

This script tutorial might be helpful:
http://av.adobe.com/russellbrown/CaptionMaker_SM.mov

How to improve the speed for backing up files to time capsule via in hose wifi?

How to improve the speed for backing up files to time capsule via in hose wifi?

via in hose wifi?
Use a bigger hose??
House??
Need to spell this out a bit more..
But speed via 2.4ghz to the TC is restricted by Apple to max 130mbps link speed.. much slower actual transfer.. latest TC and laptops can do 450mbps on 5ghz but you need to be up close.. so place the TC near the device using it.. and force 5ghz connection by using a different name for 5ghz network.

Sequence File Hierarchy Sequence Name Resize

Hello,
Is there a way to resize the sequence name in the Sequence File Hierarchy Call Graph? I have a need to make the sequence names long and it does not fit in the file hierarchy.
Thanks.

There is not a way. The objects that hold the sequence names are a default size. The best way to be able to view the whole name is just to scroll over top of the object.
Jesse S.
Applications Engineer
National Instruments

How to generate documentation for ODI 12c?

Hi,
How to generate documentation of maps for ODI 12c?
Hugs,
Rafael

Hi,
Please go through the below links
Oracle Data Integrator Solutions: Generating Documentation from Oracle Data Integrator (ODI)
http://docs.oracle.com/cd/E28280_01/integrate.1111/e12643/organizing_documenting.htm#ODIDG517
Thanks,
Pratik

How to generate XSL for an XML file to use it for XSLT transformation -SSIS?

Hi All,
Can anybody please help me to generate XSL for my attached XML file?
I need to use the XSL file for XSLT transformation.
Thanks & Regards,
Sri

Hi Vibhav,
Thanks for the response.
I am aware of the process but not sure how to generate XSL file.
Can you please refer me to any tool which can convert XML to XSL? or please can you transform my simple XML to XSL?
Thanks & Regards,
Sri

Can I generate documentation for a JAR ?

HI,
I have the sources in a jar. Can I generate JavaDoc for the package without first extracting the jar ?
If yes, could you provide the command line syntax ?
Thank you,
Vlad Grama.

From the JDiff (http://www.jdiff.org) docs:
JDiff also includes a script to use the classdoc application from
http://classdoc.sourceforge.net or http://www.jensgulden.de, by Jens Gulden,
[email protected], to call a doclet such as jdiff on a .jar file rather than on source.
~Matt

How do I select a database schema to use for a sequence file?

I have multiple database schemas on my TestStand system and when I select a sequence file I need to set the schema so the results get entered into the database correctly.
I use a SequenceFileCallback for DatabaseOptions in my sequence file and in this I set Parameters.DatabaseOptions.DatabaseSchema.Name='xyz' where xyz is the database schema name that needs to be used. This does not work and it reports an error that it can not be loaded or the file may be corrupted. Does this feature work or do I just have an error in what I am setting this equal to?
Solved!
Go to Solution.

Hi plf,
It seems to me you are going about this the right way. The DatabaseOptions callback is called immediately before the process model fetches the schema statements based on the schema name. I was able to change the schema on the fly in the same way you are attempting (using the default sequential model and TestStand 4.1).
Ensure you are using a schema that is defined in the Database Options Dialog (Configure»Database Options»Schemas Tab»Schemas Listbox).
Ensure you are using the exact name of the desired schema (copy it from the Name textbox in the above Schemas Tab).
Ensure that choosing this schema manually works when you run this sequence file (to be sure it is not corrupted).
Check that you are using double quotation marks around the schema name, not single marks as in your post.
Evan Prothro
RF Systems Engineer | NI

How to set PDF version for the output file in ES4

I am using LiveCycle ES4 for converting word docs to PDF. In our client we invoke createPDF method of GeneratePdfServiceClient class. We are using a custom PDF setting in LiveCycle in which we have defined configuration as per the business requirement.
We need the PDF version of the document to be set to 1.4. For this, we are setting the value for compatibility (under File Option) to Acrobat 5 (PDF 1.4) in custom PDF setting template in LiveCycle adminui and in Acrobat preferences. Both these setting are not working and the resulting document has PDF version set to PDF1.5. Can you tell me how the version of resulting document be set to 1.4??

Hi Neelam,
I tried it and did the personalization as the help documentation said.
But I don't know why it doesn't work:(
I followed these steps:
1. open workbook and select a value for the variable used in query
2.click personalized variable and new window pop up then I select the value I chose and added to the selection.
3.click ok and quit
4.save workbook
but next time I open this workbook, the variable selection window still pop up.
BR
Fanchest

How do I generate documentation for a sequence file hierarchy?

Similar Messages

Maybe you are looking for