How do I make ff4 update all currently open browsers when I move tabs around? It used to be automatic. Now I have to close all my brosers and reopen them for the change to take effect.
How can I make FF4 update all currently open browsers when I move tabs in 1 browser. The change used to be auto and applied to all open browsers last time. Now I need to close every open browser and reopen for the effect to take over.
I use that add-on. Works great.
Similar Messages
-
Reload a method for a change to take effect ?
I've got 1 object which has 1 button and 1 label.
The containt of the label is stored in a text defined in the constructor.
When I press the button I want this text to change.
So I change the containt of the variable text in the action of the button. But it doesn't change anything. The text stay the same.
Is there any way to reload the label for this change to take effect ?
I would appreciate your help,
Olivier.try the validate() method. It should redo the gui stuff after it has changed. And read the api too.
-
when making changes to the I/O buffer size( motu-pci 424) it takes an abnormal length of time for the changes to take affect any ideas?
A fully loaded one( keep in mind I have had fully loaded projects in the past, and it did not take this long) this was noticed after installing LP8, also major latencey even at 64 buffer size
-
I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price that I am paying for Photoshop alone?
Contact sales support by web chat. They can cancel your current subscription and transfer you to the new one if you are within certain criteria. Otherwise you may need to wait until your subscription runs out and then sign up later.
Mylenium -
I just updated my Ipad to I0S 7.02 like it asked me too. Now i have a black screen Itunes logo and a picture of the plug in cord. I can't get to my home screen. What happened?
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
I have an Apple Retina Pro Notebook and am looking for the best compatible wireless printer to use with it. Do you have any recommendations?
"WiFi Wireless Printer" seems to give Users the feeling that they somehow print directly from their computer to the Printer. That is NOT how it works.
To make a WiFi Wireless Printer work, you need to make it a participant on your network, by providing the Network_name and the Password. It then becomes a peer of your MacBook on your home Network, and you can create a Print Queue for it in Add-a-Printer.
There is no particular advantage to this over, say, an Ethernet Printer -- except that you don't have a Physical cable to string. -
I was going to download a book off of Itunes and when I went to download it my zip code didn't match my card so I wasn't able to download it. now I have a pending charge on my account from Itunes for the book I never received, will I still be charged?
Digital Editions can open files of .pdf , .epub and .acsm format.
When you click on a download link from an online bookstore, a .acsm file gets downloaded to the "Downloads" folder of your computer. You need to double click on this .acsm file(if Digital Editions is already installed) to get the book. If you still get a message saying that your computer doesn't have a way to open this file, please manually associate Digital Editions to the .acsm file type OR open Digital Editions and drag and drop the .acsm file onto Digital Editions.
Hope this helps. Thanks! -
jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc?jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc? -
I downloaded an iTunes update and when ashen I restarted my pc it locked up. It says client Mac address 001320bead25, PXE E53 No boot file name received. PXE MOF. Exiting Broadcom pie rom. How do I get my pc back!
When you installed iTunes on your work computer, then connected your iPad to that computer, it wiped what was on the iPad, then put the iTunes library (nothing) from the work computer onto the iPad. You can try copying the iTunes folder from your home computer over to your work computer, but since the apps were bought with a different account, they may not load or update properly.
-
Will 'Buy All Episodes' duplicate and charge me for the ones I already own?
I want to buy all the episodes of a TV series on iTunes, however I already bought 2 of them and they're still in my library. If I click the 'Buy All Episodes' button in the iTunes store, will it recognize that I already own some of them and just charge me less - or will it actually buy them again?
It will most likely buy them again.
-
Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?
In v6 airport utility "Join a wireless network" is not available once the TC is setup.
You must reset to factory and try again using the selection options.. and it can fail or not come up.. This is an extremely poor way to setup a TC.. and you should NEVER EVER DO IT.. that is why apple removed it. Since you are joining wireless it makes no difference where the TC is located.. since it would become a dumb AP and turn off its ethernet ports.
Place it right next to your main modem router, plug in by ethernet, and select bridge mode and create a wireless network. Never use Join a wireless network..
However for completeness here is the method.
How do I setup my time capsule with wireless internet?
Never ever do it.
If you need internet by wireless and backup to the TC.. then simply plug the TC directly into the Mac.
Run dual network.. Setup explained here.
Using Time Capsule hardwired to Mac for back-up only. -
I want to upgrade my iphone and want to make sure that all my phone and email contacts get transfered along with my photos, videos and music to new phone. How do I go about doing that?
http://support.apple.com/kb/ht2109
-
How do I get my web pages back to original size? My fonts are all too large and keep reverting after I change them back!
That has not worked. I do it and still it reverts. Isn't there a way to tell Firefox to just go back to default settings?
-
I've updated all my software and Itunes on my Macbook Pro but when I went to open iTunes it tells me it's either corrupted or not installed correctly and to reinstall it. Is there anyway to fix it without reinstalling the whole program?
Here's a previous discussions that seems to have solved a similar issue in the past:
https://discussions.apple.com/message/12209861#12209861 -
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
Maybe you are looking for
-
Calling a jsp page from an if statement??
Hi I am going toexplain what I can do already first then explain what I want to do: 1) I have an html page that has a form. This form requests a userId and password to be entered. Upon submission of this form a java servlet is called 2) the java serv
-
Help :( Skype 7.1 won't stop crashing no matter wh...
Ok so after the "7" update Skype has really gone downhill it continues to crash on start, I have ran troubleshooting= useless. I have downloaded latest adobe= useless. I have uninstalled/reinstalled 3 time now and again = useless... If i could trust
-
Come posso trasformare la mia versione di photoshop c3 extended in photoshop c6?
ciao, ho un abbonamento adobe, prima di avere il computer nuovo avevo photoshop c6 e mi trovavo benissimo, ora ho comprato il pc nuovo e dentro chi me l ha venduto mi ha regalato photoshop c3, solo che quando ho installato photoshop c6 da adobe creat
-
Error in creating SUBscription order
Hi friends, Im creating Subscription order SUB in IS Media through JKK0. Im getting following error. Combination of application J / event DEB001 / company code SPL not maintained Can anyone tell me what could be the reason? Regards, Rajesh
-
Investment Program in Budget Profile
Hi Experts, I would like to know on how to create and assign an Investment program in Budget profile. Is an investment program mandatory for Investment Project and for New Product Development Projects? Will there be any implication if we do not assig