How do I point a site to an IP Address

Hey All,
So quesiton. I have two ip cameras setup on IP address inside of the network. I am trying to add them to my sites list inside of Server Admin. My goal is to go to mydomain.com/camera1 and have it go to 10.0.1.x and mydomain.com/camera2 go to 10.0.1.x:8080.
Any ideas on how to do such a thing?
Thanks for the help!
Kevin

It'd be more typical to have camera1.example.com and camera2.example.com (example.com is an RFC-reserved "bogus" domain name, where "mydomain.com" is a real and registered domain) configured in your DNS, or to allow your web server to embed the displays into a web page on your server.
To access the pages from your web server (assuming you're running one public-facing web server, and want to access through that into the local cameras) then you're going to be learning how to perform an Apache reverse web proxy (see the Mac OS X Server web technologies manual) or an Apache rewrite rule (activate MOD_REWRITE, then catch the /camera1 in the URL and redirect the request to the camera), or (and this is one of the more common approaches) to utilize the nature of HTML and web services, and particularly that the contents of a web page do not need to all be from one web server. (This is how those web pages with galleries of web cameras works.) It's quite possible to embed information from remote web servers within one page, depending on the particulars of the "other" web server. The camera, in this case.
I don't have the HTML code handy to embed the camera feed into a web page, but there should be examples posted around the 'net. Here (and there are some other sites around that have good details, though those web articles also tend to have some links off to materials that wouldn't be appropriate to link to here) or via JavaScript or Java or otherwise. (This is also arriving in HTML5; see here and here for some details.)

Similar Messages

How can I point my iPhones to a specific address book for syncing?

I only want contacts on my iPhones that have phone numbers and not email addresses.
After creating a iPhone address book, how do I point iTunes to that book instead of the regular Contacts book?
Have been able to do that in the past, but cannot do so running OSX 10.8 or 10.8.2.

You'll have to use Wi-Fi to sync, Bluetooth is not supported:
You can use iPhone with the Apple Wireless Keyboard and other Bluetooth devices, such as Bluetooth headsets, car kits, and stereo headphones. Third-party Bluetooth headphones may support volume and playback controls. See the documentation that came with your Bluetooth device. For supported Bluetooth profiles, go to support.apple.com/kb/HT3647
From the manual: iphone_user_guide 5 page 109
Use iCloud to keep Contacts up to date on your iOS devices and computers
Go to Settings > iCloud, then turn on Contacts. See “iCloud” on page 17.
Message was edited by: Ingo2711

How to edit the top sites on safari 7.0.1

The edit button that usually sits at the bottom of the top sites page in safari no longer exists and i can't figure out how to change my top sites or the amount of top sites displayed.

Safari 7
Top Sites Edit button is moved to top left corner the tile from the bottom left corner.
Hover the mouse pointer near the top left corner of the tile,
Edit button and the pin should appear.
Best.

How do I recreat a .mac site at the same address from a crashed hard drive?

Hey folks..i would really appreciate help with this one..its tricky..
I am a pro musician and I use my 3 year old macbook for everything..music, marketing, etc...Well it crashed last month and I lost EVERYTHING..(I know, I know..I'm and idiot for not backing up)
I used iWEB for my website..I bought a domain name from Godaddy.com and had it forward to the long mac address to make it easier for people to find me..the site is still up but I dont have the actual site I made from the iWEB template on the new hard drive anymore. My questions are..
1. Is there anyway to save the current site back onto my new hard drive?
2. If not, how do i rebuild the site in the exact place (mac address)so that when people enter the Godaddy address (gregvarro.com), it forwards them to the new site?
I really would appreciate any help on this issue..thanks in advance!
Greg

peace2009 wrote:
1. Is there anyway to save the current site back onto my new hard drive?
Greg ~ Welcome to the discussions. If you're asking whether it's possible to import your published site on MobileMe back into iWeb on your new HD, the answer is no. Only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb.
You can manually back up the Domain file, or use Backup to back it up.
Paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html
peace2009 wrote:
2. If not, how do i rebuild the site in the exact place (mac address)so that when people enter the Godaddy address (gregvarro.com), it forwards them to the new site?
I may not be understanding your qstn properly, but if you re-create your iWeb site and publish it the same way you did before, your Godaddy domain will point to the new site just as before — as all you would be doing is replacing the old contents of your site with the re-created contents.
...If that answer doesn't satisfy, you could post in this +"MobileMe iWeb and Personal Domain"+ forum:
http://discussions.apple.com/forum.jspa?forumID=1163

How to publish a single site

I have several sites in iweb, including travel, wedding, teaching, and research. However, every time I make a change to a single page within one of these sites, and then publish to a folder, all four sites are published. This wouldn't be so bad, except that my travel site has TONS of photos, and thus it takes at least an hour to publish the site.
Can anyone tell me how to publish just one site to a folder?
Thanks,
Aaron
powerbook g4, ibook g3, imac g4 Mac OS X (10.4.6)

Hold the phone -- since iWeb is storing the Domain info in Users>username>Library>Application Support>iWeb then wouldn't it be reasonable to assume that different users could have different Domain files, and thusly different sites (from iWeb's point of view)?
It would seem to me that an easy workaround would be to create a different User account on your box for each of your sites, and then maintain them in iWeb that way. Of course, you'll want to make sure that your media resources (eg. pictures, movies, sounds) are available to all those users (I keep all my multimedia on a separate hard drive from my OS and applications for exactly this reason, but you can also do it by granting privileges to folders).
I haven't tried this out, but it makes sense on paper.
Dual 1ghz G4 (MDD) Mac OS X (10.4.6)

Point-to-Site disconnect every few minutes

Hi,
I'm using Azure vNet Point-to-Site feature and I can connect from an on-premise server to my Azure Gateway and to a Web Role located in my vNet.
My problem is that the VPN connection get's dropped at irregular intervals (after 3, 6, 12, 20, 21 minutes).
Any advice what I could do?
Thanks
FlorianDemeter
Windows Event Log says:
"The user XXX\XXXXX dialed a connection named WISvNET which has terminated. The reason code returned on termination is 631."
VPN client log says:
Operating System : Windows NT 6.2
Dialer Version : 7.2.9200.16384
Connection Name : CONNECTIONNAME
All Users/Single User : Single User
Start Date/Time : 24.05.2013, 15:55:25
Module Name, Time, Log ID, Log Item Name, Other Info
For Connection Type, 0=dial-up, 1=VPN, 2=VPN over dial-up
[cmdial32] 15:55:25
03 Pre-Init Event
CallingProcess = C:\Windows\Explorer.EXE
[cmdial32] 16:13:56
13 Disconnect Event
CallingProcess = C:\Windows\system32\CMMON32.EXE
[CMMON32] 16:13:56
26 External Disconnect due to Lost Connection
[CMMON32] 16:13:56
14 Reconnect Event
Edit:
PPP-Log when disconnecting (receiving a Terminate-Req):
[1628] 05-27 13:59:15:951: Packet received (18 bytes) for hPort 0
[1892] 05-27 13:59:15:951: >PPP packet received at 05/27/2013 11:59:15:951
[1892] 05-27 13:59:15:951: >Protocol = LCP, Type = Terminate-Req, Length = 0x12, Id = 0x7, Port = 0
[1892] 13:59:15:951: >C0 21 05 07 00 10 5C 64 7D 72 00 3C CD 74 00 00 |.!....\d}r.<.t..|
[1892] 13:59:15:951: >00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1892] 05-27 13:59:15:951:
[1892] 05-27 13:59:15:951: RemoveFromTimerQ called portid=8,Id=0,Protocol=c021,EventType=0,fAuth=0
[1892] 05-27 13:59:15:951: RemoveFromTimerQ called portid=8,Id=0,Protocol=0,EventType=2,fAuth=0
[1892] 05-27 13:59:15:951: FsmThisLayerDown called for protocol = c021, port = 0
[1892] 05-27 13:59:15:951: FsmDown event received for protocol 80fd on port 0
[1892] 05-27 13:59:15:951: RemoveFromTimerQ called portid=8,Id=4,Protocol=80fd,EventType=0,fAuth=0
[1892] 05-27 13:59:15:951: FsmThisLayerDown called for protocol = 80fd, port = 0
[1892] 05-27 13:59:15:951: FsmReset called for protocol = 80fd, port = 0
[1892] 05-27 13:59:15:951: FsmDown event received for protocol 8021 on port 0
[1892] 05-27 13:59:15:951: RemoveFromTimerQ called portid=8,Id=7,Protocol=8021,EventType=0,fAuth=0
[1892] 05-27 13:59:15:951: FsmThisLayerDown called for protocol = 8021, port = 0
[1892] 05-27 13:59:15:951: RemoveFromTimerQ called portid=8,Id=7,Protocol=8021,EventType=8,fAuth=0
[1892] 05-27 13:59:15:951: FsmReset called for protocol = 8021, port = 0
[1892] 05-27 13:59:15:951: RemoveFromTimerQ called portid=8,Id=1,Protocol=c029,EventType=0,fAuth=0
[1892] 05-27 13:59:15:951: <PPP packet sent at 05/27/2013 11:59:15:951
[1892] 05-27 13:59:15:951: <Protocol = LCP, Type = Terminate-Ack, Length = 0x12, Id = 0x7, Port = 0
[1892] 13:59:15:951: <C0 21 06 07 00 10 5C 64 7D 72 00 3C CD 74 00 00 |.!....\d}r.<.t..|
[1892] 13:59:15:951: <00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1892] 05-27 13:59:15:951:
[1892] 05-27 13:59:15:951: LCP Phase: Received Terminate Request
[1892] 05-27 13:59:15:951: NotifyCaller(hPort=0, dwMsgId=1)
[1892] 05-27 13:59:15:951: InsertInTimerQ called portid=8,Id=0,Protocol=0,EventType=2,fAuth=0,Timeout=1
[1628] 05-27 13:59:16:596: PROTOCOL_MSG_LineDown recvd, hPort=0
[1892] 05-27 13:59:16:596: Line down event occurred on port 0
[1892] 05-27 13:59:16:705: FsmDown event received for protocol c021 on port 0
[1892] 05-27 13:59:16:705: RemoveFromTimerQ called portid=8,Id=0,Protocol=c021,EventType=0,fAuth=0
[1892] 05-27 13:59:16:705: FsmReset called for protocol = c021, port = 0
[1892] 05-27 13:59:16:705: RemoveFromTimerQ called portid=8,Id=0,Protocol=0,EventType=3,fAuth=0
[1892] 05-27 13:59:16:705: RemoveFromTimerQ called portid=8,Id=0,Protocol=0,EventType=7,fAuth=0
[1892] 05-27 13:59:16:705: RemoveFromTimerQ called portid=8,Id=0,Protocol=0,EventType=2,fAuth=0
[1892] 05-27 13:59:16:705: RemoveFromTimerQ called portid=8,Id=0,Protocol=0,EventType=1,fAuth=0
[1892] 05-27 13:59:16:721: RemoveFromTimerQ called portid=8,Id=1,Protocol=c029,EventType=0,fAuth=0
[1892] 05-27 13:59:16:721: LcpEnd
[1892] 05-27 13:59:16:721: EapHostPeerClearConnection returned: 0x0
[1892] 05-27 13:59:16:721: Post line down event occurred on port 0
[1892] 05-27 13:59:16:721: NotifyCaller(hPort=0, dwMsgId=26)
[1892] 05-27 13:59:16:721: NotifyCaller(hPort=0, dwMsgId=10)

Florian,
Did you ever figured out how to fix this issue? I have the same problem and I am not able to fix it.
[4088] 01-04 11:21:27:229: Line down event occurred on port 55
[4088] 01-04 11:21:27:229: FsmDown event received for protocol c021 on port 55
[4088] 01-04 11:21:27:229: RemoveFromTimerQ called portid=608,Id=2,Protocol=c021,EventType=0,fAuth=0
[4088] 01-04 11:21:27:229: FsmReset called for protocol = c021, port = 55
[4088] 01-04 11:21:27:229: RemoveFromTimerQ called portid=608,Id=0,Protocol=0,EventType=3,fAuth=0
[4088] 01-04 11:21:27:229: RemoveFromTimerQ called portid=608,Id=0,Protocol=0,EventType=7,fAuth=0
[4088] 01-04 11:21:27:229: RemoveFromTimerQ called portid=608,Id=0,Protocol=0,EventType=2,fAuth=0
[4088] 01-04 11:21:27:229: RemoveFromTimerQ called portid=608,Id=0,Protocol=0,EventType=1,fAuth=0
[4088] 01-04 11:21:27:229: RemoveFromTimerQ called portid=608,Id=0,Protocol=0,EventType=4,fAuth=0
[4088] 01-04 11:21:27:229: RemoveFromTimerQ called portid=608,Id=0,Protocol=0,EventType=6,fAuth=0
[4088] 01-04 11:21:27:229: LcpEnd
[3200] 01-04 11:21:27:229: Stopping Accounting for port 55
[4088] 01-04 11:21:29:241: Post line down event occurred on port 55
[4088] 01-04 11:21:29:241: NotifyCaller(hPort=55, dwMsgId=23)
[3884] 01-04 11:26:13:475: PPPEMSG_LineDown recvd, hPort=56
Thanks,
Adrian Cristea

SCCM 2012 - Change Distribution Point's Site System Properties Site Code

Hello All,
I'm hoping someone can help me out. Here's what I have and here's what I'm trying to do.
SCCM 2012 R1
Each of our offices has a Windows 7 SP1 Ent PC that is a distribution point for that office's 10-20 machines. A number of these offices and their DPs were setup prior to me setting up a number of Secondary Site Servers. So right now, these DPs' site codes
are the primary site server's. I'd like to change these to one of the Secondary Site Servers.
When I go to the Site System properties of one of these Win7 distribution points, the Site Code is grayed out.
So, the question is, how can I change one of these DPs' site codes?
Thanks in advance to whomever helps!!
Bill

That's a strange reason for using Secondary Sites. How many clients are you managing? Have you good WAN links?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to publish to FTP site NOT mobile me???

how do i publish the site to an FTP site that is hosting for me? i don't have mobile me and dont want it if i don't have to. please help. thanks!

As you have posted this in the iWeb 08 forum I am assuming that you are using iWeb 08 which does not have a built in ftp to server option.
In iWeb 08 you need to select the publish to a folder option and your site will be published to your Home Sites folder - there will be an index file, plus the Site folder of the same name that you named your site in iWeb.
Next you need to download Cyberduck free from the internet - this is a dedicated ftp program that you use to upload your files to your server. Open Cyberduck and enter your host, username and password details to connect with your host and then upload both your Site folder and your index.html file to your server. Your Site folder needs to be placed in the public_html folder on your server or whichever folder your server requires you to upload to. The index file needs to sit outside this folder to point into it.

How to custom add web sites to Top 6/12/24 ?

Hi all, how to custom add web sites to Top 6/12/24 ?

Press and hold the + icon in the URL/Address bar and select "Top Sites".
or
Move the mouse pointer to the + icon and do a 3 finger touch on the trackpad, then select Top Sites from the dropdown.
For more info:
https://support.apple.com/kb/PH19263?locale=en_US

How to create valid DW site?

Hi,
What does this mean please?
"You must work within a valid dreamweaver site to use this
extension"
I've purchased Pop Menu Magic, when I click an insertion
point for PMM and then click the PMM button, I get the above
message. How do I make my site a valid dreamweaver site so that I
can use that extension please?
Thanks
Ray

Have you defined a site? SITE | New > Site....
DW is very site-centric. For all of DW's management
conveniences to work,
you need to correctly define your local and remote site.
Please use DW's F1
help to read about sites.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Ray Dar" <[email protected]> wrote in
message
news:fiuclc$57o$[email protected]..
> Hi Murray,
>
> I don't really know what that means. I've built a site
using DW on my
> computer. I edit it on my computer and upload it to the
ftp when I want to
> see
> the changes? I have no idea what a defined site is.
>
> Thanks for the help.
>
> Ray
>
>
>

How to Best Optimize Flash site for performance (not SEO)

I am a newbie to Flash design. I have build this site for my client www.888acolyte.com
I watched a bunch of YouTube Videos on how to stracture a site and then pulled together a lot of features from different learning resources.
I loved Flash for its animation capabilities and used a lot of time line tweening in my site layout. My background has a moving blurry colorful spots animation, my pages come out and assemble themselves as animations, transitions and rollover done as animations.
All of it done via Flash's time line tweening.
As the end result site is stattering in performance rather significantly. I am not sure if it is because of the animations I have employed or because of something else?
I used JPG instead of PNGs as they take a lesser size. I used an 80 quality in them out of Photoshop.
Every JPG is scaled to 75% of its actual size as I expect the site to be bigger on some bigger screens. I set it up to "Allow Full screen"
Flash Tab Settings:
In the export options :
JPG Quality = 80
No Sound
SWF Settings:
Checked "Compress Movie"
Checked "Include Hidden Layers"
Checked "Include XMP Metada"
UnChecked "Export SWC"
HTML Tab Settings:
Dimensions: 100%
Quality: High
I looked up some resources for "how to optimise a flash site" and seems that the best one around would be from 2009: http://www.netmagazine.com/tutorials/optimise-flash-movies
There is also this "magic button" "Save and Compact", which did not seem to have much effect on the final size of an .swf file.
I hope to receive a feedback on how to properly stracture and optimize a Flash site for the best performance.
If to go into details is too complicated perhaps someone can point me to a good learning resource on the topic?

If you're just needing a flash player, have you tried the JWPlayer from Longtail Video? That's what I'm using to view flash video on my site.
http://www.longtailvideo.com/players/jw-flv-player/

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

The me.com website is not designed for or intended to be accessed by iOS devices. Apple provides support in iOS or seperate Apps for accessing all aspects of MobileMe except for the Accounts section.
Use MobielMe as intended and you'll have no problems.
See: http://support.apple.com/kb/ts1673
Even if you use a different browser to get access to me.com on iOS, you'll find most of it is unusable.
Other websites that present you with the mobile version have been programmed to do so by their developers. They specifically look for users accessing from 'mobile' devices and switch to the mobile site. Many such sites provide a link to go back to the 'full' site, if not, there's not a lot you can do except use a browser that can pretend not to be a mobile browser.

How to create a muse site in various languages with multiple domains

I have been asked to create a website for a product. A very simple website with maybe one or two pages and one product for sale for which the client would like Paypal as the payment gateway. Simple right?
No! This client would like to market their product into Europe, they would like to purchase multiple European domains ( .fr, .de for example).
So how on earth can I do this? I will be using Muse for build and Business Catalyst for hosting.
Bearing in mind the client will not want to pay for separately hosted sites. Is there a way of translating the text for each domain. Or could I assign multiple domains but direct them to different home pages within the same site?
I haven’t a clue how to problem solve this.

Hi,
Some links that might be useful,
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Re: How can i create different languages for my page?
How can i create a multilingual website?
how to create a multilingual site
Do let me know if you have any question.

Can't figure out how to keep two different sites...

How can I keep two sites and be able to get to both of them. When I create an iMovie and go to the share tab to share it wants to put it in the last site I created. What if that's not the site I want it on? I can't figure out how to go back and forth to the sites and update them without them writing over each other...

Baldredlion:
Regarding Varkgirls suggestion about iWebSites:
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
Do you Twango?
15 MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.9) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

How do I point a site to an IP Address

Similar Messages

Maybe you are looking for