How do I remove the Output Tray of my HP OfficeJet Pro 8620 e-All-in-One Printer

I cannot remove the Output Tray. I do some printing two-sided (one in color, the other b&w). Removing the Main Input Tray to place the paper for Side 2 is time-consuming. It would be much easier to take the just-printed Side 1 as it's completed, then simply lay it correctly on top of the blank sheets in the Main Input Tray to print Side 2. I am unable to remove the Output Tray. The store's salesman said it should be easy to remove and re-install, but that it may held in place by a piece of tape. I am prone to breaking things I'm trying to work on. I don't want to break my 4-months old printer! Any ideas? Thanks.

The main part of the output tray is not removable. There are a few alternatives: the input tray can be pulled partially open and the printed pages loaded in it - it should not be necessary to remove the input tray completely. The other possibility would be to just print using the automatic duplexer. If you are printing on plain paper or index paper this should work, it would not be suitable for printing on the back side of photo paper.

Similar Messages

I have a brand new hp officejet 6700 premium e-all-in-one printer but my macbook pro is not detecting the printer to even install it or make a print can some one tell me if it is a problem with the printer or the macbook pro?

can some one help me with the question ..

no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...

I am unable to scan using the hp office jet pro 8500 wireless all in one printer from an I-MAC

I have a new I-MAC OS Lion computer and an older HP Officejet Pro 8500 wireless all-in-one printer, scanner, fax, photo. I cannot scan, though I can print and I can fax. The error message says I must be connected to the network, and yet I am connected. The only diagnostic tool available is for MS systems only. Help???

Hi,
Make sure to use any scan method available for Lion.
If you have the HP Scan application installed, be aware that the used software version is not intended for Lion.
Please follow the steps below to find what scan methods may be used on the OS:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01910186&lc=en&cc=us&dlc=en&product=3752459
If there is still any problem while trying to scan, also make sure to install the latest HP Printer Driver 2.9 by clicking the Apple icon and then Software Update.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I am a studio graphic designer needing to purchase a color jet printer to handle small business takes. I am trying to decide on the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelop

I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).
Do you have any recommendations?

I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).
Do you have any recommendations?

What do I do when I get the message my printer is not connected? HP Officejet Pro 8500A e-All-in-One

What do I do when I get the message my printer is not connected when I want to print wirelessly.? HP Officejet Pro 8500A e-All-in-One. I have a macintosh computer using snow leopard. I have used the printer for 6 months. Nothing has changed. I shut off the printer and turned it on. The internet is working altough I will turn it off and on. What do I do next? Thank you.

The easiest and fastest thing for you is to reset the printer to its defaults and then just install the printer again following the instructions in the manual when you received it. If you don't have these you will find this on the HP web site.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I live out in the county where WiFi is not available. I don't have internet either. I have purchased the ipad2 and have been told that I can print from the ipad2 directly to the HP Officejet Pro 8500A eprint all-in-one. Is that true?

I would like to be able to print from my ipad2 or my iphone4 directly to a wireless printer. I don't have WiFi at home or internet. I am able to get my emails and use the internet thru both these at home. Will I be able to use them to print? Any suggestions which printer? I was told that the HP OfficeJet Pro 8500A eprint all-in-one should work and wouldn't have to use a router. I don't want to go purchase this and try to set it up if it won't work thru the 3G network.

kathyfrompalmyra wrote:
I would like to be able to print from my ipad2 or my iphone4 directly to a wireless printer. I don't have WiFi at home or internet. I am able to get my emails and use the internet thru both these at home. Will I be able to use them to print? Any suggestions which printer? I was told that the HP OfficeJet Pro 8500A eprint all-in-one should work and wouldn't have to use a router. I don't want to go purchase this and try to set it up if it won't work thru the 3G network.
Apple says that it will work.

Can I use the old generation rebuilt ink cartridges in my hp 1513 all-in-one printer

Can I use the old generation rebuilt ink cartridges in my hp 1513 all-in-one printer.

phantom3 wrote:
Can I use the old generation rebuilt ink cartridges in my hp 1513 all-in-one printer.
Hi,
Well, your printer simply won't print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I remove the SCCM 2012 client and reinstall SCCM 2007 client on all of our computers

Hello All
We have bit of a problem. Our virtual SCCM 2012 r2 server was deleted and the back solution we had in place keeps failing.
We do have our sccm 2007 server still in place but its only role was imaging as we transferred roles from one to another.
My question is now our support needs to remote into pcs but cant because the CM12 server is gone. How can I remove the 2012 client from all of our companies computers and reinstall the CM07 client so we can remote into computers again.
Thanks in advance!
Phil
Phil Balderos

Run a ccmsetup /uninstall on the clients. You may need to run via PSExec. Then push out the SCCM 2007 client via the 2k7 console.
Cheers
Paul | sccmentor.wordpress.com
Thanks Paul!
I have to do this on over 350 computers and 110 servers. How can I do it on a more massive scale?
Phil Balderos
I would check Torsten's approach first and see if the ccmsetup will uninstall the 2012 version. I'm not sure. Obviously the other way round is fine.
Using PSexec you can script this to call up a txt file of all your servers/computers and run the uninstall.
e.g.
for /f "tokens=*" %a in (computers.txt) do psexec \\%a %WINDIR%\ccmsetup\ccmsetup.exe /uninstall
If your account has privileges on all devices you won't need to add in any username/password credentials. Obviously only devices that are switched on and you have access to will run this.
Cheers
Paul | sccmentor.wordpress.com

Entering a "$" in the SSID password when setting up an HP Photosmart 2710 all-in-one printer

Hello,
I have a Photosmart 2710 all-in-one printer, and I am trying to set it up wirelessly. However, my SSID as a "$" in the password, and I can't find any way to enter this symbol in the wireless setup on the printer. Also, when I try to run the HP Printer setup wizard I downloaded from the HP support site, it says this printer is not supported by the wizard?
Can anyone help?
Thanks,
jmmain1

You must change your wireless password in the router to not conntain any special characters. Once done, go back and input the password in the printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How do I remove the ICloud from my sons IPOD? He is receiving all texts

How do I remove an ICloud account from my sons Ipod? He is receiving my texts...

You can:
- Go to Settings>Messages>Send NAd Receive and log out of the Apple ID.
- Also
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
Create a NEW account/ID for him using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID on him iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want him to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

How can I set the fax prefix no. on HP officejet pro 8600

Greeting.
I have a HP Officejet Pro 8600, and I want to send FAX thru this.
In my office, we need to put '0' to call outside.
However, there is no prefix setting menu on this device.
I have another model HP 1213mf which has Prefix No. menu on it, but I couldn't find this menu on 8600.
Please Help me

Hi Wony,
Welcome to the HP forums!
I understand you're looking for a way to add a prefix on the Officejet 8600 for faxing, and I will do my best to explain what I found on this subject.
As far as I can tell, and I did check with a few colleagues, there is no Prefix No. menu on the OJ 8600 like there was on your LaserJet 1213mf. With that being said, that doesn't mean that you can't use this printer to fax in your office. Anytime you need to dial the fax you would hit the 0 first follow by ##, as that adds a pause to the dialing to then dial the rest of the number. You can also add that to speed dial numbers so that for numbers that are used all the time you don't have to dial the number each and every time.
So just as an example, if you were to fax HP's faxback server (1-888-473-2963) you would dial "0##1-888-473-2963" to get the fax to send.
This may not be exactly what you were looking for, but I hope this is an acceptable workaround Please let me know!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How do I reset the 940 ink cartridge chip on Officejet Pro 8500 Premier?

I have refilled my 940 ink cartridge and now I can't get my printer to print. I get the error message that I do not have enough ink to ensure printer health. My ink is full.

Hi sparkplugYou could maybe try resetting the printer...http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02005923&cc=us&lc=en&dlc=en&product=3752456&tmp_track_link=ot_search Note though, as BikerMike has already pointed out, refills tend to not to have the same reliability as originals...http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00853819&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US... Kind Regards, Ciara

HP Office Jet Pro 8600 e-all-in-one Printer - N9911g won't connect to the internet

I've been trying to set this up for 2 days. I have the software on my computer and connected to my printer, however, my printer isn't getting a connection to the internet. I've tried everything I know. Also, the software on my computer says that the security certificate isn't safe so I installed it and it still doesn't like it.

emarieh,
Your router could most definitely be the cause. You will have to contact your router company and have them open up specific ports on the router. Please take a look here to learn a little more on Security Information and Firewalls.
I found this helpful information from fellow Community Member VisionAiry, please see below:
Incoming ports (UDP) are destination ports on the computer while outgoing ports (TCP) are destination ports on the HP printer.
• Incoming (UDP) ports: 137, 138, 161, 427
• Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500
The ports are used for the following functions:
Printing
UDP ports: 427, 137, 161
TCP port: 9100
Photo card upload
UDP ports: 137, 138, 427
TCP port: 139
Scanning
UDP port: 427
TCP ports: 9220, 9500
HP device status
UDP port: 161
Faxing
UDP port: 427
TCP port: 9220
HP device installation
UDP port: 427
Web Services Ports
UDP and TCP: 80, 443, 5222, and 5223
Bonjour Ports
UDP and TCP: 5353, 5297, and 5298
You will need to contact your router manufacturer and have them unblock these ports, let me know if this helps.
Thank you again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

What is the best airprint for home office? I want an all in one printer with air and e-print

I am looking for aprinter for a new mac book pro, also have i phone, ipad and ipod touch, I want airprint and e print, also photo printer and use as a home office printer. will do a reasonable quantity, so an economical ink source is also a consideration??

I've heard of airprint, but what is eprint?
have you looked into getting an airport express? http://www.apple.com/airportexpress/
and I'm using this to airprint from my iphone to it: http://netputing.com/airprintactivator/airprint-activator-v2-0/
(I'm using version 2.1b2 on Lion).
This would open your selection up a lot more depending on what you're trying to do.

Officejet Pro 8620 won't print the "full pasted image"contained in a Word 2007 document

Just upgraded and installed for Officejet Pro 8620. Running with Windows 7, 64bitWhen printing a page that includes a image that was copy/ paste, using the snipping tool into the word document, it does not print the "full image". In print Preview the full image appears, but when it prints about 15% of the bottom edge and the right edge of the image is omitted. This was not a problem when printing from the Office jet 8600. It is not a problem of page width or length because text is printing just fine.We removed all prior printing software, and re-installed the new printing software, disabled the printer firewall, and problem still occurs.Please advise what other information is needed. Thanks.

Welcome to the HP Community @SandieKeith , I saw your message about the issues you are having when printing from MS Word. If the Print and Scan Doctor did not seem to help any, you can also try the steps and suggestions below! 1. Uninstalling the Printer Software from the Control Panel2. Restart the PC3. Reinstall the Full Feature Driver here: HP Officejet Pro 8620 e-All-in-One Printer4. Try printing from MS Word again5. If there are printing issues, try a Clean Boot and restart the PC6. Try printing again If the issue still continues after the above steps, check out the Microsoft Support sites for help with resolving the Word printing problem:How to troubleshoot printing problems in WordHow to troubleshoot print failures in Word

How do I remove the Output Tray of my HP OfficeJet Pro 8620 e-All-in-One Printer

Similar Messages

Maybe you are looking for