How do I restore my Ipod Nano 6th gen, apple logo won't show up on Ipod when I do a hard reset just a circle with a line through it.

When it shows up in Itunes it said I need to do a restore. When I do that an error 1439 comes up. it is stuck in recovery mode.

Are you using the latest version of iTunes and have all the latest Windows updates and patches installed? It might not hurt to try plugging the iPod into a different USB port, preferably a high powered 2.0 one on the back of your PC.
See here for more troubleshooting.
iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
B-rock

Similar Messages

Which one should I get?iPod nano 6th gen 8 GB or 16 GB?or iPod nano 7th gen?

I want to get an iPod nano and which one should I get?iPod nano 6th gen 8 GB or 16 GB?or iPod nano 7th gen?

If you also want to use it as a watch and like the clip get the 6th Generation.
If you want to have a bigger screen, watch videos, and use Bluetooth without a dongle get the 7th Generation.

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i

Hey, the stand-by button on my iPod nano 6th gen has been randomly stuck/pushed into the ipod were it does no longer work. How do i fix it?

Hey, the stand-by button on my iPod nano 6th generation has been pushed into the iPod, I guess after being pressed a lot, to the point were it doesn't work, what do I do to fix this???

You'll need to take or send the iPod in for service or repair either via Apple or a third party company that does repair work on iPods.
B-rock

Ipod nano 6th generation apple logo flashing

I have an ipod nano 6th generation that when connected to the computer USB it flashes the apple logo. When not connected, it does not turn on at all. I have tried all the reset tricks with no impact. Also, my iTunes does not even recognise it as being connected to the computer. Any ideas I haven't explored yet?

Hi magostin,
Welcome to the Apple Support Communities!
In situations where your iPod nano is not recognized in iTunes, I would suggest the troubleshooting steps in the attached article. Please use the troubleshooting for Windows or Mac in the article depending on what type of computer you are connecting to.
iPod not appearing in iTunes - Apple Support
Cheers,
Joe

IPod Nano (6th gen.): White Screen saying "OK to disconnect." when not connected.

My 6th Generation iPod Nano (Dopi is his name) took an unfortunate ride through my washing machine a few weeks back (one of the draw backs of it being so small and lightweight... it can sometimes elude the quick pre-laundry pocket check). At first, it was okay. I immediately threw it into a ziploc bag full of rice to pull all the moisture out of it. The screen was a little blotchy for a while, but it eventually seemed to work out all the kinks and was back to full operation within 12 hours. I was using it fairly regularly after that for the next couple days with no issues.
A few days later, my iPod was getting low on fuel and had a "Connect to Power" screen on it. So I plugged it into my iMac, and everything was working fine, I started to manage some playlists in iTunes while it charged, and that's when I noticed the screen was odd. Instead of the usual "Do Not Disconnect" screen that I'm used to, the screen had an all-white background, with a black "Do Not Disconnect." message on it. I thought it was odd. But I ejected it, and it said "Ok to disconnect." with a black checkmark. Same white background, black text. (also a black battery life icon in the top right corner) I disconnected, and it just told me to connect to power, again.
Finding that weird, I let the iPod's power completely drain, figuring that would fix the issue. It did not. As soon as I plugged it back in, the white screen came back. I let it power up to full, and after I eject and disconnect it, the "OK to disconnect" screen comes back, even after I've disconnected, and it stays there. I can't operate anything on it.
I've tried everything I know how to do: I've let the power drain, and recharged to full. I've tried resetting it. I tried restoring it to factory settings. And I tried to reset it and put it into disk mode, but the black and white "OK to disconnect." screen comes back before I can even get it into disk mode.
Before I restored to factory settings, I could still manage all the files on my iPod. I could add songs, remove them, make playlists and everything when I had it connected to iTunes, I just can't do anything with the iPod itself. So, my little Dopi is in a coma right now. He's still alive, he just won't wake up. I don't want to pull the plug on him.
Any suggestions? Anyone else have this problem?
It's not easy for me to get to an Apple Store, so I thought I'd try this before I take it to any geniuses.

Hello iamjonnyb1988,
The article linked below, while written for iOS devices, details some useful troubleshooting steps that can help get your computer to recognize your iPod Nano.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

My ipod nano (6th gen)'s screen don't turned on... when resetting it, the screen turns to white.. the most worst is, it doesn't work out...

I really don't know to fix it... What happen was, when i played my ipod nano, it turns to white... i don't know if I accidentally clicked anything on the screen or the buttons at the side of the device... What i did was, I connected it in my laptap because I was thinking that maybe my ipod was in hang mode. When I was able to connect it, the itunes recognized it but I can't played the music and the screen in my ipod screen was still white... SO, I restored it in factory setting... the same thing happen... i don't know what happen, so I need your help...

You can work through the remaining five 5 R's of troubleshooting.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damage part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock

IPod nano stuck on Apple logo; won't boot.

I have an iPod nano that seems to charge, but won't boot. There's no sad iPod logo or anything, just the Apple logo. I can boot it into diagnostics mode, and it seems to be fine. However, it won't go into disc mode.
Any advice?

This tread (http://www.thestudentroom.co.uk/showthread.php?t=723183) is about the same problem you're having. At some point it's said:
"Hold down Select / Menu (to reboot the iPod)
As soon as the Apple logo appears, hold down Rewind / Select until...
...you see a backwards Apple Logo.
At this point, you will have entered Diagnostic Mode. It'll test the RAM, and then tell you to HIT PLAY TO CONTINUE. Hit 'Play'.
You'll be in a menu that you advance by hitting FF (Fast Forward). Advance to the 'DISKMODE' entry.
Hit 'Select.' This will put you into Firewire Disk mode. The screen should change to the familiar 'Do Not Disconnect' mode. At this point, connect it to the computer.
Run the restore utility; it should now recognize the iPod and offer to Restore the factory software. Do so. You'll lose whatever's on it, but you'll avoid having to send it back in to Apple and paying repair fee."
You can also look here: http://www.command-tab.com/2006/03/31/fixing-a-frozen-ipod/ and http://support.apple.com/kb/TS1399?viewlocale=en_US

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen

How to change the passcode of iPod Nano 6th Gen

Just got my iPod Nano 6th Gen replacement of my 1st Gen, but didn't come with Manual or guide, anyone happened to know how to change the passcode u'll be asked when you lock the volume limit?

I think you need to restore through iTunes to change an unknown password. Here is a link to the manual.

I recently purchased an IPOD NANO 6th gen. I have a large library of music on my PC (non MAC). How can I sync my music files from my PC to my IPOD NANO?

I recently purchased an IPOD NANO 6th gen. I have a large library of music on my PC (NON MAC). How can I sync my music library from my PC to my IPOD NANO. I use Windows Media Player to hod my music files.

Install iTunes and import the Windows Media Player library to it.
(63922)

IPod Nano 6th Gen needs a restore every day...?

My iPod Nano 6th Gen works well for arond 24 hours but every morning when i wake up it says it needs to be restored using iTuunes.
When I restore it, it works perfectly. No problems at all. I can fill it to capacity with music and it works all day. The next morning, the battery is still really close to fully charged, but the iPod is in recovery mode. I've scoured the internet but haven't found anyone with a similar problem.
Generally, I've read about iPods that will not restore, or that, even after a restore, will remain in recovery mode, which is indicative of moisture or some other malady.
This Nano has been well cared for and is in flawless condition in every way aside from the condition mentioned. Not even a scratch or smudge. I'm baffled.
Has anyone experienced a similar problem? I love to use the smaller ipod when running or bike riding, but am stuck restoring it each day I choose to use it over my Classic 160's.
Any help is appreciated.

Ok, here is a bit of an update on the issue.
For the last two mornings, when the Nano says it needs a restore, I've hard reset it (holding down both the select/menu and volume down button simultaneously), then, when the apple logo shows, I held down the menu and the volume up button simultaneously, which then restores the ipod back to functioning properly (I think I read that this is supposed to put the ipod into disk mode, which it doesn't do on this Nano, obviously).
Aside from being annoying as all get up, I suppose the ipod is working, so it's a minor victory.
Still, does anyone know why this might be happening every single night? The battery is still completely charged and once I do the aforementioned sequence, the ipod works perfectly until the next day.

Ipod nano 6th gen askinh for resore every time i connect and after the restore not showing the sysnced song on ipod

i have a ipod nano 6th gen, few days back when i tried to add few songs through iTunes it gave me error that it "can't connect to ipod . restore it" so i did and after that i synced al the songs and it showed that my my empty ipod has been up few GB's. after i disconnected , i could not see any song on the ipod . when it connected back the ipod the got same error about restore. i dont know what to do now , please help.

Hello Singhindia,
It sounds like you restored your iPod Nano when iTunes prompted you and it appears to sync. When you disconnect it and look at the content, the songs arent there, and when you plug it back into iTunes you get the same message again. I would recommend these troubleshooting sections from the following article to help isolate the issue to hardware or software:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Verify that iTunes is installed and updated
Restart the computer
Verify that Apple Mobile Device Support is installed
Verify the device's USB connection
Verify that the Apple Mobile Device Service and iPod service are both running
Verify that the Apple Mobile Device Driver is installed
Remove and reinstall iTunes
If the issue continues, gathering iPod Diagnostics may be helpful for you or for support personnel in identifying the issue.
Additional Information
Certain phone connectivity software from vendors such as Samsung, Nokia, Bora, Novatel, and Sony may also cause this issue. If you have such software on your computer:
Uninstall your Samsung, Nokia, Bora, Novatel, or Sony phone connectivity software and test. Contact the manufacturer of this software for assistance in doing this.
Remove iTunes and all related Apple software by following this article (for Windows XP), or this article (for Windows Vista and Windows 7).
After reinstalling iTunes, test the iPod nano.
If you still need your phone connectivity software that was removed, reinstall this software and test your iPod nano to ensure it still functions with iTunes. Contact the vendor of your phone connectivity software if the issue returns.
While the error message is different than you are seeing, the troubleshooting is relevant for you.
Thank you for using Apple Support Communities.
All the best,
Sterling

I have my ipod nano 6th gen. I cannot sync it, and this message appeared to the screen. " The ipod cannot be synced. The required folder cannot be found." how is it? Please help to fix this. thanks

How to fix my newly acquired ipod nano 6th gen? i cannot sync it because it always appear to my screen that it cannot be synced. the required folder cannot be found? how is it?

Is your iPod configured to sync photos? If so, try disabling the syncing of photos and see if the error message goes away.
Anything change with your iTunes library since the last time the Nano was able to successfully sync?
B-rock

How to Clean and Polish iPod Nano 6th Gen?

Hey guys,
I just got a good deal off eBay of a used iPod Nano 6th Gen in the mail today, but it seems quite dirty. Their is much dust and gunk under the clip, the buttons and screens have many smudges, and the the 30-pin connector port and headphone jack are a little dirty on the inside, kinda moldy in too.
Does any one know how to properly clean the ports, and the rest of the iPod before I use it? Thanks.
- Ale47099

See chapter 12 of your iPod's User Guide for the proper ways to clean the iPod Nano.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

How do I restore my Ipod Nano 6th gen, apple logo won't show up on Ipod when I do a hard reset just a circle with a line through it.

Similar Messages

Maybe you are looking for