Ipod nano 6th gen askinh for resore every time i connect and after the restore not showing the sysnced song on ipod

i have a ipod nano 6th gen, few days back when i tried to add few songs through iTunes it gave me error that it "can't connect to ipod . restore it" so i did and after that i synced al the songs and it showed that my my empty ipod has been up few GB's. after i disconnected , i could not see any song on the ipod . when it connected back the ipod the got same error about restore. i dont know what to do now , please help.

Hello Singhindia,
It sounds like you restored your iPod Nano when iTunes prompted you and it appears to sync. When you disconnect it and look at the content, the songs arent there, and when you plug it back into iTunes you get the same message again. I would recommend these troubleshooting sections from the following article to help isolate the issue to hardware or software:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Verify that iTunes is installed and updated
Restart the computer
Verify that Apple Mobile Device Support is installed
Verify the device's USB connection
Verify that the Apple Mobile Device Service and iPod service are both running
Verify that the Apple Mobile Device Driver is installed
Remove and reinstall iTunes
If the issue continues, gathering iPod Diagnostics may be helpful for you or for support personnel in identifying the issue.
Additional Information
Certain phone connectivity software from vendors such as Samsung, Nokia, Bora, Novatel, and Sony may also cause this issue. If you have such software on your computer:
Uninstall your Samsung, Nokia, Bora, Novatel, or Sony phone connectivity software and test. Contact the manufacturer of this software for assistance in doing this.
Remove iTunes and all related Apple software by following this article (for Windows XP), or this article (for Windows Vista and Windows 7).
After reinstalling iTunes, test the iPod nano.
If you still need your phone connectivity software that was removed, reinstall this software and test your iPod nano to ensure it still functions with iTunes. Contact the vendor of your phone connectivity software if the issue returns.
While the error message is different than you are seeing, the troubleshooting is relevant for you.
Thank you for using Apple Support Communities.
All the best,
Sterling

Similar Messages

  • I updated my iPod nano 6th gen firmware 1.1 to 1.2 with iTune but it is not ok because of connection

    I updating my iPod nano 6th gen firmware 1.1 to 1.2 with iTune. But it is ok because an network error has occurred. How can i solve this problem.
    Can I download iPod nano 6th gen firmware 1.2 update file without using iTune?
    I want to offline update with iTune.Can I get firmware 1.2 update file.

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • New ipod nano (6th gen) cannot be identified

    New ipod nano 6th gen replacement for a broken one and when plugged in a message says "An ipod has been detected but cannot be identified properly". How do you connect a new iod to an old playlist?

    See here: iPod nano: Error message saying that iPod 'could not be identified properly'
    B-rock

  • IPOD nano 6th gen recovery problem?

    I am trying to restore my ipod nano 6th gen to factory settings as I was having problems with it.  I followed the promps and now it just sits there saying "Do Not Disconnect" with the flashing circle with a bar through it.  Can anyone help?
    Thank you very much.
    Jeff

    Try posting in the iPiod Nano forum.  This is the iPod touch forum.

  • Question: Problem Syncing some songs in ipod nano 6th gen

    Hi all,
    So I've been having some problems syncing songs over to my new Ipod nano 6th gen. Whenever I try to sync, this message pops up:
    This happened before with another song, and I just ignored it, and after checking my iPod, it had synced anyways. However, some songs do not seem to do this. I've tried changing the file format from mp3 to wav, finding other copies, deleting it from iTunes and then re-loading it. Nothing seems to work. The songs that won't sync work fine on iTunes, and I can play it from my computer, whether from iTunes or Windows Media Player, but it refuses to go on my ipod. >.< If anyone has encountered this problem and knows how to fix it, help would be appreciated. Thanks!

    Did you actually add these songs to your iTunes library and move their physical location or is iTunes referencing them in another location? Sounds like the latter in which case they won't be synced to the Nano.

  • IPod Nano 6th Gen needs a restore every day...?

    My iPod Nano 6th Gen works well for arond 24 hours but every morning when i wake up it says it needs to be restored using iTuunes.
    When I restore it, it works perfectly. No problems at all. I can fill it to capacity with music and it works all day. The next morning, the battery is still really close to fully charged, but the iPod is in recovery mode. I've scoured the internet but haven't found anyone with a similar problem.
    Generally, I've read about iPods that will not restore, or that, even after a restore, will remain in recovery mode, which is indicative of moisture or some other malady.
    This Nano has been well cared for and is in flawless condition in every way aside from the condition mentioned. Not even a scratch or smudge. I'm baffled.
    Has anyone experienced a similar problem? I love to use the smaller ipod when running or bike riding, but am stuck restoring it each day I choose to use it over my Classic 160's.
    Any help is appreciated.

    Ok, here is a bit of an update on the issue.
    For the last two mornings, when the Nano says it needs a restore, I've hard reset it (holding down both the select/menu and volume down button simultaneously), then, when the apple logo shows, I held down the menu and the volume up button simultaneously, which then restores the ipod back to functioning properly (I think I read that this is supposed to put the ipod into disk mode, which it doesn't do on this Nano, obviously).
    Aside from being annoying as all get up, I suppose the ipod is working, so it's a minor victory.
    Still, does anyone know why this might be happening every single night? The battery is still completely charged and once I do the aforementioned sequence, the ipod works perfectly until the next day.

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

    I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

    Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
    Try posting this one in the iTunes forum, they might have a solution for you.
    i

  • Software update for the iPod Nano 6th Gen

    Is there gonna be any software update for the iPod Nano 6th Gen for video playback??

    Re: Software update for the iPod Nano 6th Gen
    There is already new hardware for the nano (7th Generation) and it would take a hardware modification to put video on the 6th Generation Nano so no speculation was needed, Carl had the correct answer.
    My Original iPod Nano received updates beyond it's generation, there is no reason to conclude this would not be possible for other models and generations. Why would the iPod Nano 6G need a hardware modification for video playback? It already can do analog composite video output for viewing slideshows with music and transitions on a TV and can handle full photo resolutions. The iPod Nano 6G seems more than capable from a hardware perspective of video playback, it's just that the screen is tiny small for viewing video realistically for any length of time with comfort. That can be rectified by using the onboard TV out feature, though battery life might be miserable. It has nothing to do with the release of the iPod Nano 7G.

  • Will there be a download for existing ipod nano 6th gen owners?

    I just wanted to know if existing ipod nano 6th gen owners will be able to download an update for the new features?

    There seems to be some confusion about old vs new 6th gen nanos and this update.
    What was announced was ONLY a software update. For those of you that bought your Nano 6th Gen last year, you will get ALL the features noted in the release yesterday.
    The most common confusion seems to relate to the fitness app and using the step count dongle with Nike+. There is NO NEW HARDWARE in the Nano to allow the device to work without the dongle. The folks at Apple have worked their software Mojo to allow the accelerometer to do the job of the dongle that used to get stuck in your shoe.
    Hope that helps,
    i

  • How much will apple charge me for fixing a cracked ipod nano 6th gen screen??

    Well I don't have any warranty and i want to get my ipod nano fixed! So how much will apple charge me to fix a cracked ipod nano 6th gen screen????

    They won't actually "fix" the iPod, but instead will replace it with an exact refurbished replica.  See this page for pricing.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • My ipod nano 6th gen wont charge, turn on or respond to anything i have done i have tried the troubleshooting and nothing works. I have droped it once but it work for about a month after and i havent wet it any tips would be much apriciated! thanks

    My ipod nano 6th gen wont charge, turn on or respond to anything i have done. I have tried the troubleshooting and nothing works. I have droped it once but it work for about a month after and i havent wet it. any tips would be much apriciated! thanks

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod nano (6th gen) keeps connecting and disconnecting itself from my computer can anyone help?

    I have read numerous posts online about the same problem but can't seem to sort mine out. I've tried changing power leads, restoring back till an older version of itunes, resetting the ipod, restarting my computer and tried every USB port in sight but still nothing.
    I have plugged a friends ipod touch into my computer and it connects and appears in itunes fine, but with mine it wont stay connected long enough for me to try and restore anything with it on itunes its literally a 1 second interval between connected and ejecting. I thought maybe it could be the connection terminal on the ipod but i have had it connected to a wall charger and xbox with it staying connected with no problems.
    I am running windows vista on the computer and the nano was previously synced to a different itunes could this be the problem and if so how do I go about fixing it??
    Thanks

    I too am having this same issue. I connect my iPod nano (6th gen), and it appears for anywhere between 1 to 10 seconds and then automatically ejects.
    I'm running a macbook pro with OS X 10.6.8 and the most up to date version of iTunes. The strange thing is that the nano works fine on my old macbook from 2007; which also has the most up to date iTunes but is running OS X 10.5. Another thing is that my iPod touch works just perfectly on my MacBook Pro.
    I have read up on a lot of forums, and have found little help for those who are running into this problem on a Mac. The majority of fixes are for PC. Any help would be greatly appreciated.

  • My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

    My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

    Read the PDF user manual for a possible solution:  iPod Manuals and/or iPod Nano Support 
    Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. 
    If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

  • Ipod nano 6th gen is not recognized by itunes on a PC running Windows XP professional SP3, itunes 10.2

    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes (but it shows on my pc as a hard disk) weirder still, my ipod nano 3rd gen works just fine on this computer.
    Whats wrong? HELP!!!
    I have spent 3 days messing with my pc and have made no real progress.

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

Maybe you are looking for

  • Macbook heating issues

    I experienced where my macbook pro with retina get overally hot underneath and on the od occassions this sound of air gushing out occures as if it cooling it down, anyone else experienced this? wrong title corrected

  • Need help with LR5 catalog which refuses to make workable copies

    LR catalog refuses to make workable copies. error message: Catalog cannot be opened due to unexpected error Is there any way around that? It was working fine then I moved several folders from the main drive to the external HD and saved again. I have

  • Issues with New PFCG role

    Hi Experts, I have created a new Business role ZBP_MKT_MAN and PFCG role ZSAP_CRM_UIU_MKT_PROFESSIONAL. However the authorisations are not getting copied from SAP_CRM_UIU_MKT_PROFESSIONAL to ZSAP_CRM_UIU_MKT_PROFESSIONAL properly. Can someone guide m

  • Sound Blaster cd not recognized; Installed hardware not fo

    Does anyone know if I can down load the installation for the sound blaster li've 24 bit's My computer does not recogniz the cd and though it was installed it can't find the hardware either. HELP!!!!

  • Forwarding Picture Mail to non-Sprint customers

    I am having trouble sending forwarded picture mail messages to users whom aren't sprint customers. Is it possible? If so, please let me know how to accomplish this. TIA, amwashin Post relates to: Treo 755p (Sprint)