How do I run 4000 series ADAM Modules in LabView
I am trying to operate up to 4 ADAM modules (2 x 4024, 1 x 4012 and 1 x 4060) through LabView 6i running on Windows XP.
I have tried to download and use a copy of the Advantech 32-bit LabVIEW driver from a foreign, non advantech website but when installed the VI's are not accessable on the functions pallet as discribed in the accompanying literature. I am able to talk to the modules using the ADAM utility software (Version 1.53). I am also able to access the modules on Advantech Device Manager though I am not able to OP correctly using the test function.
I am fairly new to Labview and would appreciate a step by step procedure as to where/how I should access the correct drivers and how to install them and to ac
cess the ADAM modules. I belive that once I can get the correct VI's loaded and working I will be able to go from there. Thanks
Attached is a VI that generates the string needed to set all relays of the ADAM 4060 using one command...
Follow the same pattern (i.e. header format etc.) when you implement the rest of the needed commands.
MTO
Attachments:
A4060_SetAll.vi 22 KB
Similar Messages
-
How SAP standard run the interest calculation in AR module
Dear expert,
would like to seek for your advise, how SAP standard run the interest calculation in AR module ?
Also advise,does the interest calculation generate the interest base on the dunning run?What are relationship between interest calculation generate ?
What are the T-code for running the interest so that able to generate the interest posting according to baseline due date?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
Between, do you have any ideal the Interest Indicator ZB stand and reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
Please help.
Regards,
KarenHi,
Thank you for the promtp reply.
I still have query would like to seek for your advise.
1.Does the interest calculation generate the interest base on the dunning run?For example, the interest is only can be post/generated when there is dunning run and vise versa.
2.What are relationship between interest calculation generate ?Does interest generation depand on the dunning run?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
3.Between, do you have any ideal the reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
4.For posting use F.2B and that will calculate interest on open items of customers. Does this posting is post as noted item or posting document? Beside, do we every day need to run this posting F.2B in order to update the AR interest calculation report and post the interest for the overdue invoice?
5.Do you have any reference link/document /SAP notes on calculate interest on arres F.2B?
a)How the program calculate those overdue invoice for example: does sap calculate the interest base on interest + due amount until the customer made the payment?
b) If customer made payment on the due amount and not the interest and vise versa? How theF.2B program logic work on the calculation ?
Please help.
Regards,
KH -
How do I run multiple channels in the same VI?
I am trying to analyze two signals, one temp, the other strain. I have configured my two tasks using MAX, and written separate VIs which work fine when run independently. Now I want to measure the two signals and output the data on two separate graphs within one VI, but when I run the VI I keep getting an error stating that the "resource is already reserved" (or something to that effect). I tried adding a channel to an existing task, and building the VI but that didn't work (both signals showed up on both graphs). I also tried using two separate tasks but that when I get the aforementioned error. How do I get each channel to show up on different graphs?
I am using: M-Series DAQ card 6259, SC-2345 and SCC modules, with Labview 8.0Does the following VI come close to what you wanted to do ?
Attachments:
demo-signal-split.vi 108 KB -
How can I run a packet sniffer on a Router or Switch
I have on my network several router 1700 series and switches Catalyst 2950 and I want to know how can I run ethereal on those babies to monitore what comes and goes
The two most common methods would be (the old way) insert a hub (not a switch) in-line between the devices withthe traffic you wish to monitor or (the new way, for Cisco anyway) using port mirrroring.
A hub (not a switch) will repeat every pulse that passes on the line to the analyzer.
Since finding a new hub these days is virtually impossible (even some of the things sold as hubs are really switches), the more common way, at least in Cisco environments, is to "SPAN" (aka Port Mirroring) the port of the device whose traffic you'd like to monitor.
Here's the setup guide for a 2950:
http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_19_ea1/configuration/guide/swspan.html
Good Luck
Scott -
How can I run a BW Function from EXCEL-IN-PLACE (BPS)using VBA??? Please give any example.
I would like to run my function module ZMY from EXCEL-IN-PLACE using VBA and get a result.if you are using excel in place in the web application environment I doubt you can, you've never really had any macro functionalty there.
If you are in the gui environemnt (Planning folders) it will depend on how you want to invoke the module... -
How can I run a servlet with Sun Java System Application Server PE 8?
I've created a package with a TestServlet.class inside, used the deploytool to create a WAR and deployed this using the autodeploy folder.
The filestructure has been generated and I find the TestServlet.class in
[installdir]\domains\domain1\applications\j2ee-modules\testProject\WEB-INF\classes\[packagefolderstructure]\TestServlet.class.
The context root is working fine, but I have no clue how I can run the servlet directly via the URL.
I've tried many things like
http://localhost:8080/testProject/TestServlet
http://localhost:8080/testProject/servlet/TestServlet
http://localhost:8080/testProject/servlet/[packagenamewithpoints]TestServlet
http://localhost:8080/testProject/servlet/[packagenamewithslashes]TestServlet
etc etc
Can somebody tell me please how to write URLs to deployed servlets? Or send me an example url and xml descriptor files?
Thanks a lot in advance!in web.xml use servlet mapping
<servlet-mapping>
<servlet-name>TestServlet</servlet-name>
<url-pattern>/doit</url-pattern>
</servlet-mapping>then use http://localhost:8080/testProject/doit -
How can i set a series of measurement's by time?
im trying to run a series of temp measurments which should be done every 5 cm , how can i set this kind of test?
Solved!
Go to Solution.If you ask a better question, you might get a better answer.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks -
How to get the Grand Total in Module pool Screen
Hi Frds.
How to get the Grand Total in Module pool Screen
Example i have 10 different materials
for each matarial has different moving . But in my case matarials is doesnt matter here
10 material Moving Average price to do Frand total and display in one column...
Please Help me out Frds.
Regards,
KabilHi
You need to calculate the total in a module of PAI (or PBO) event:
PROCESS PAI.
LOOP.....
ENDLOOP.
MODULE CALCULATE_TOTAL.
MODULE CALCULATE_TOTAL.
GRAND_TOTAL = 0.
LOOP AT ITAB,
GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
ENDLOOP.
ENDMODULE.
In this way the grand total will be calculated as soon as the user presses enter or another command.
You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop, -
Mac Pro OSX 10.8.3 HP 4000 series scanners are not detecting.
Well..I think, I did everything. I have followed all instructions recommended by HP. I have updated and installed latest drivers. I have even searched the warez sites to find a trick. Useless, useless and useless.
Hardware is retina display with 256 GB SSD, 1600 mGz 8 GB ram and I7 processor. OSX version is 10.8.3
HP 4000 series scanners are not detecting by this machine. Vuescan is detecting but the scanning quality is also terrible.
Strange. I have nothing to say.For the Scanjet 4850, follow the link below and click on the instructions tab. It looks like you have to get the software and drivers for 10.6 and run a patch to make them work with 10.8. That should get the scanner installed and working.
Scanjet Software Patch to Use OS X 10.6 Software and Driver on OS X 10.7 and 10.8
For the Scanjet G4050, all you should need to do is install the driver from the link below to be able to use the scanner with image capture and other similar products.
HP Scanjet ICA Software for Mac OS X 10.6.8, 10.7 or 10.8
Let me know what happens.
I am a printer tech for HP. -
How do i run windows programs on mac
How do i run a windows program on my mac? Is there a particular application for it? or do i need to download and install a virtual windows software? - if so, can anyone suggest any names for software. I've heard about virtual box.
Why ask here instead of the ones for Macbook series, or for Windows on Mac, aka Boot Camp.
VirtualBos is just the VM free for running Windows as guest OS under Mac OS, and then why exclude what or type program? Maybe game that needs to run natively, or that your notebook would have troubke with disk spa e, RAM, or your processor.
Windows runs hotter, too, so that is another concern.
Mire Q's than answers. -
How do I run a full process from SSIS ???
Hi all
I run BPC 5.1 SP3, and I need to automate a series of jobs, but the system is giving me problems and I hope someone can help out.
I need to automate a full optimize and then a full process of our AppSets.
I know that in SP3, the Appsets are taken offline for the full optimize and are then left offline, so in-between I run the "SystemAvailableTask" to set the Appsets back online.
Additionally, all dependencies are removed from the FACT table for the optimized AppSets, which are only rebuilt by performing the full process afterwards.
Anyway, the problem I have is that the optimize is running quite happily from SSIS, as is the SystemAvailableTask.
Up to this point in the job, everything works as intended, so I now have a fully optimized Appset, which is available for users to access.
However, the Full Process job then fails.
I have run the Full Process as a standalone job from SSIS and it takes 2m36s to run, but fails to rebuild any dependencies.
When I ran it from the SAP Admin program, it took 9m57s to run and rebuilt everything correctly.
I am currently only offered 1 option in the SSIS package, which is to run a Full or an Incremental process, so I select Full.
However, on the right-hand side, there are various other options available (such as bApplicationProcess, PROCESSMODE (set to "3"), PROCESSOPTION (set to "1"))
Should I be changing any of the settings on the right to make the job run properly, or should I be doing it differently.
Obviously, I need to make this work from SSIS, as I can't schedule a full process any other way, so I would be extremely grateful for any help that you can offer.
Thanks
Craig
Edited by: Craig Aucott on Aug 25, 2009 10:21 AMThe easiest way to do this is to write a Tuxedo server (i.e., using only
ATMI and no CORBA stuff) that does the following:
1.) In tpsvrinit(), the last thing that it should do is a tpacall to the
service contained in this server (and nowhere else) with the TPNOREPLY
flag.
2.) In the method that implements the service, do your database work, sleep
for a little while, do another tpacall to itself with the TPNOREPLY flag,
and return.
Hope this helps,
Robert
Ram Ramesh wrote:
Hello folks:
How can I run a background process that runs under WLE's control.
What I am looking for is a way to have a process that runs in an
infinite loop and polls the database to see if there is any background
work that needs to be done. But I still want the process to be managed
by WLE for fault tolerance.
Thanks,
Ram Ramesh
[email protected] -
How to get running Daqmx task handles
HI,
We are creating a TestStand module using CVI 8.5, in that module we have to close all the running Daqmx tasks, please provide help on how to get running Daqmx task handles. We could not find any API function which can return list of running Daqmx task handles so that we can close one by one.
Thanks in advance for the helpI just had a similar issue. Stumbled on this forum in the hopes of getting an answer and found no reply to the original message. I think this is what we are both looking for DAQmxGetSysTasks.
I havent used it yet. Still in the excited I found something stage. -
Hi, I bought HP dm1-4310nr netbook from US and run into a problem.
As you know US uses different keyboard layout than we here in Europe.
I was hoping to replace the keyboard from my pc by buying nordic version from ebay.
Only flaw is that there isn't any version of this precise keyboard model in market though.
Is some other 4000-series's keyboard compatible with this one?
This question was solved.
View Solution.Hi,
You bought a special edition (suffix nr) therefore you can't find keyboard in other region. You can easily find keyboard for your region if you bought a normal dm1 machine as shown on page 43 of the following document:
http://h10032.www1.hp.com/ctg/Manual/c02666702.pdf
For your machine, pleae check page #55 on the first manual of the following link:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=5328049
You may want to try part from the first document, this may or may not work.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How do i run a servlet??????
running servlets:i downloaded jsdk but how do i run a servlet? i got the error
C:\WINDOWS\Desktop>javac HTTPGetServlet.java
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/tools/javac/M
ain
when i tried to run my servlet, please help
thanksAs mentioned in another post in the thread, servlets run from within a web server that has pre-loaded the jvm and serves web requests. Often they are called 'sevlet containers' as they act like a wrapper program for the actual vm. Tomcat is such a web server, quite a popular one for running servlets, and is considered the reference implementation for a sevlet/jsp server. you can read up on it at...
http://jakarta.apache.org/tomcat/index.html
To get you started, this is what i did to set up tomcat. Im using RedHat Linux at home, so this may differ to what you have to do initially.
First, make sure you have at least the jsdk and jsdk ee installed and the appropiate JAVA_HOME and J2EE_HOME environment variables set.
I am using the Apache web server to handle web page requests on my box. If the request is for a context containing a servlet or jsp file (context is a tomcat term for a particular location or path in the url) then apache passes the request to tomcat via a apache module and a special protocol. Tomcat then runs the .class file or .jsp file, returns the output to apache which then returns the output back to the browser. So initially you should set up and have the apache web server running.
Next download and install the jserv or tomcat module for apache, which apache uses to communicate with tomcat via a special protocol, and the tomcat rpms from...
http://jakarta.apache.org/builds/jakarta-tomcat/release/v3.2.3/rpms/
...Im using 3.2.3 which works fine. you may try the later versions if you like.
Install the tomcat rpms. They should dump a whole lot of stuff in a /var/tomcat directry, including some nice sample and admin apps. if you had downloaded and installed the tomcat-manuals rpm you can find lots of helpful information in the /usr/doc/tomcat-{your version here}/ directry. This is what you should probably read through now!
Once that is done, its simply a matter of adding a reference in your httpd.conf file to the tomcat.conf file in the tomcat/conf dir (if you want to have complete control over the tomcat module and contexts) or tomcat-apache.conf (in the same directry) if youd like tomcat to handel its own configuration of apache. something like...
include /var/tomcat/conf/tomcat.conf
...should do.
then run tomcat start (in /usr/bin/) and apache and away you go. You should be able to point your browser to your.server.com/admin/ and get the tomcat admin tools. This allows you to add view and delete contexts to your server (say for separating different server-side applications). your.server.com/examples/ has some nice stuff as well.
Hope this helps. I warn you im not an expert and haven't looked at this stuff for some time. I probably have something wrong so please, experts, if you see something stuffed up let us know. -
[SOLVED] How to automatically run modprobe vboxdrv?
Hi,
I wonder how to automatically run at startup module vboxdrv such as for example always before running VirtualBox I have to type sudo modprobe vboxdrv and would like to improve this was done automatically. Please help and thank you
Last edited by formoza (2014-07-28 18:22:46)see the wiki for kernel modules
Maybe you are looking for
-
Using the Case clause with Model clause
Hello PL SQL gurus I've used some scripts I've found on these forums to create a mortgage amortization statement. What I am trying to accomplish is getting the script to run a calculation or use a value within a table based upon the value in that tab
-
Additional suggestion for iTunes 11.1.4 re-install
Like a lot of people, I also hit the same wall with update to iTunes 11.1.4. Big props to turingtest 2 and others on the board, who gave great instructions to help folks re-install the new version of iTunes. Many were able to reinstall after followin
-
Good name (or maybe a pattern) for a client-side data accessor
Hello, I am building a client/server app, the client is a Swing application. The client needs to read/write information to the server. I have a set of "DAO" classes that encapsulate remote acces: package myapp.client; public class OrderDAO { publ
-
Hi, I have Imac 10.8.5 and Aiport Express 802.11n wi-fi. I need a airport admin utility that I can't download. How do I do? Help me, please!
-
Here is the question... Assuming an existing tablespace with the same datafile name as a new one being created for a different instance. Is is possible to corrupt the existing datafile by using the SAME datafile path in the create tablespace command