How do I send SQL statement to SQL Server and return data without using Database Connectivity Toolkit?
Hi, I've been trying to figure out how to pull data out of my SQL Server databases and from reading some posts and doing some tests with examples, I can kind of get data connecting into my SQL server, but so far nothing that helps. Is it possible to actually get data out of a SQL Server database without using the Database COnnectivity Toolkit? and if so, how? are there whitepapers and/or examples of this? So far, I cannot find anything that works. thanks.
I haven't ever done it before in LabVIEW and don't have the time to do much of the research right now.
That having been said, you will want to look for either a .NET library or an ActiveX control. Aside from the toolkit, you aren't going to find a native solution to LabVIEW - which means using other libraries. A quick google search returns this:
http://msdn.microsoft.com/en-us/library/ms810810.aspx
which may help.
Similar Messages
-
Need Guide to create a table in SQL Server and Process data for JDBC
Dear All,
Scenario:JDBC to JDBC
I need to practice JDBC to JDBC scenario and for that i need to create a table in SQL server for sender ,receiver and update i have installed SQL Server and no idea about creation of table and Connection string for PI.
I want you to explain each and every step for the Table Creation ,Driver and connection string.
Thanks in Advance.Try searchin in the forum and then google. This forum is not for teaching the basics.
VJ -
Hyperion11.1.2.2 Sql Server and Essbase data load error
Gentlemen,
i have issue on loading data in Essbase via sql server , while loading data it was fine and all of sudden i see that i get network error 10054
network error 10054 failed to recive data / send data
unexpected essbase error 1042013
even when i try to load manully it says Data Load Fails error Data load buffer [9999] does not exist Unexpected Essbase error 1270040
and in logs
Received client request: MaxL: Execute (from user [admin@Native Directory
*Error writing to server*
Also tried with maxll its the same issue
is .esm is loacked?
any issue with ODBC?
or any orphan link which is connected to sql and hyperion unable to process another ?
let me know your thoughts
thanks.Can you try limiting the query to return some records? Try adding a where clause and see whether that works?
Regards
Celvin
http://www.orahyplabs.com -
How to Set Distinct SQL Clause on View Object without using Expert Mode.
Hi to all Actually i have a View Object usign 3 entities
if i use expert mode in my VO, it generate
QRSLT WHERE
instruction and force to include all columns on my dynamic where clause on select statement i can't include columns because get me duplicate rows
How i can include disctinct clause without usign expert mode or any other solution?
Note that in normal mode without expert mode QRSLT WHERE is not generate and all work fine
For example
select * ( select id , name from table) QRSLT WHERE loc = ..
if i use expert mode it generate QRSLT WHERE and if loc is not predicated colums get me and error :
( ORA-00904: invalid identifier )
in simple mode of View Object all work fine..
Any suggestion on It will be appreciate.....
TnxMy problem is that when use expert mode
it's change simple select statement for a select that use
select * from (select column....)
qrslt WHERE (column=somevalue)
this kind of select force me to include all where conditions of qrslt on my select columns and this get duplicate rows
thats beacuse i need include distinct without use expert mode
Anny Help on this? -
SQL Query Works in MS SQL Server 2008 but not when using Database Toolkit
I have this SQL query:
DECLARE @DataTypeTable TABLE (
Name varchar(128),
TypeID INT)
--Add comma delimeted data type names to temp table
INSERT INTO @DataTypeTable (Name)
SELECT * FROM WhatWeShouldDoRead.func_Split(@DataTypeTrimmed,',')
SELECT Name FROM @DataTypeTable
Which takes a comma delimited string and returns the string as a table. It works correctly in Microsoft SQL Server Management Studio. When I run this as a stored procedure I get back nothing. There are no errors, SQL or otherwise. I've verified that I am connected to the correct database and that the stored procedure is loaded by changing the no error string that is reported from this stored procedure (that code is not shown in the above example). Has anyone seen this problem before, or have any experiance with SQL/Labview interfaces to tell me what I'm doing wrong?
Thanks in advance.
Solved!
Go to Solution.After doing some more research it appears that the database toolkit cannot interface with any table results from any type of temp table. It may have to do with the fact that MS SQL 2008 stores temp tables in a seperate database (tempdb) and not the database you are currently connected to. See this link for a good artical on temp tables:
http://databases.aspfaq.com/database/should-i-use-a-temp-table-or-a-table-variable.html
If possible, I'd like a someone to prove me wrong, but for now will have to settle for exporting the contents of a temp table through a string. -
How to create a new page in SRM5.0 and return data
Hi,Everyone,
I want to create a new page,for example:
when user select a po item,and then we want to create a custom button at po item basic data screen,when user click the custom button,
we want to pop up a new page for our custom logic.at the pop up page,when user complete some data selection, and then the data should return or refresh to po item.
And now,I have a question for that:
How can i return or refresh data(for example,the price) to po item. I have create a bsp page for our pop-up page.
Thanks.
andyHI,Masa,
Thanks for your reply. and it's a very useful ways.and i will consider for that way.
But i think if there have any other way ?
for example: i create a bsp page for our new page,and through the custom button of po basic item page. and that can realize.but how can i return data to the select item.
Thanks.
Regards,
Andy -
How to connect MS-sql server with SAP BW
hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful... -
How to call a sql server stored procedure from oracle
Hi all,
Please anybody tell me how to call a sql server stored procedure from oracle.
I've made an hsodbc connection and i can do insert, update, fetch data in sql server from oracle. But calling SP gives error. when I tried an SP at oracle that has line like
"dbo"."CreateReceipt"@hsa
where CreateReceipt is the SP of sql server and hsa is the DSN, it gives the error that "dbo"."CreateReceipt" should be declared.
my database version is 10g
Please help me how can i call it... I need to pass some parameters too to the SP
thanking youhi,
thank you for the response.
when i call the sp using DBMS_HS_PASSTHROUGH, without parameters it works successfully, but with parameters it gives the following error
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC SQL Server Driver]Invalid parameter number[Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index (SQL State: S1093; SQL Code: 0)
my code is,
declare
c INTEGER;
nr INTEGER;
begin
c := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@hsa;
DBMS_HS_PASSTHROUGH.PARSE@hsa(c, 'Create_Receipt(?,?)');
DBMS_HS_PASSTHROUGH.BIND_VARIABLE@hsa(c,1,'abc');
DBMS_HS_PASSTHROUGH.BIND_VARIABLE@hsa(c,2,'xyz');
nr:=DBMS_HS_PASSTHROUGH.EXECUTE_NON_QUERY@hsa(c);
DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@hsa(c);
end;
Create_Receipt is the sp which requires two parameters.
please give me a solution
thanking you
sreejith -
How much memory does SQL Server 2008R2 Standard use on Windows Server 2008 R2 64-bit?
Hi,
can anyone tell me how much RAM will really be used by SQL Server?
72 GB are currently installed. As Windows is only able to use 32 GB is SQL Server able to use the other 40GB + the unused part of the first 32 GB?
Thank you very much!
BR MatthiasSorry, I don´t understand your post ?!
Maybe the question is if SQL Server is able to allocate more memory than the installed Windows Version is able to?
Since your OS is Windows Standard edition(X64) it cannot use or a process running cannot use more than 32 G of memory.
Now SQL server can use as much memory possible but it is now limited by Windows as your OS can only see 32 G.So it would be good part from your side to go to sp_configure and set 25 G for SQL server and can leave rest for OS( it just a figure not a actual
value i have given,actual you have to calculate by yourself or refer to below link) .
http://mssqlwiki.com/2013/04/22/max-server-memory-do-i-need-to-configure/
As Andrew said after 32 G what ever memory you put it is waste.
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?please post you question on failover clusters in the cluster forum. THey will explain how this works and point you at scipts.
You should also look in the Gallery for cluster management scripts.
¯\_(ツ)_/¯ -
I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?You are trying to implement manually what should be happening automatically in the cluster. If the primary SQL Server becomes unavailable in the data center, it should fail over to the secondary SQL Server automatically. Is that not working?
You also might want to run this configuration by some SQL experts. I am not a SQL expert, but if you have both hosts in the data center in a cluster, there is no need for replication between those two nodes as they would be accessing
the database from some form of shared storage. Then it looks like you are trying to implement Always On to the DR site. I'm not sure you can mix both types of failover in a single configuration.
FYI, it would make more sense to establish a file share witness in your DR site instead of placing a third node in the data center for Node Majority quorum.
. : | : . : | : . tim -
How to connect to SQL Server from Forms 10g?
Hello all,
How do we connect to SQL Server database from Forms 10g?
In Oracle Metalink site they have suggested using Transparent Gateway for SQL Server as a solution.
But is there a way we can connect directly to SQL Server from Forms using an ODBC connection
without installing anything on the database server?
Pls help!
Regards,
SamHello all,
I was able to connect to SQL Server from Oracle using Generic Connectivity (HSODBC).
Transparent gateway was not required.
Followed metalink note 109730.1
So, after I created a dblink to SQL Server, I created a synonym for the dblinked SQL Server table.
When I used the synonym as the table source in Oracle Forms, I got the following error while querying.
"ORA-02070 - ROWID is not supported in this context."
This is because Forms has an invisible ROWID field and when data is fetched from SQL Server table
no Rowid is fetched since SQL Server table doesn't have one.
Is there a way to overcome this issue or do we have populate the block manually using a SQL query ?
Pls suggest.
Regards,
Sam -
How to insert into SQL server table form oracle forms
I created a form with oracle as my database. But there one trigger where I need to insert the data into a sql server table.
Is this possible. If so can any help me out.
Thanks in advance.
AshaHi,
You can insert into sql server database using the following steps
Note: Check wether you are using Forms 32 bit drivers. If not the Odbc data source will not work.
step 1: Create ODBC data source for SQL server(one time creation);
step 2: Logout from Oracle and login to SQL server giving the user name,password and host string as odbc:<odbc datasource name>;
step 3: use EXEC SQL statement to insert the values into the SQL server and then logout and login again to your oracle database.
Second Method.
Check the sql server documentation to insert the values using command line parameters. Then you can call the host command to execute this.
Third Method.
Write a VB exe to enter the values in the sql server making two connections one to oracle another to SQL server and then getting values from Oracle and putting in the SQL server database. You can call this exe using the Host command.
Hope this will help You.
Regards
Gaurav Thakur -
How to find out sql server administrator account in sql server 2008 R2
how to find out sql server administrator account in sql server 2008 R2
adilthere is any way to find out actual administrator
because i forget that user i used to logon to server and installed sqlserver
adil
Hi adilahmed,
According to your description, you forgot the account which was used to install SQL Server. SQL Server service account information is stored in Windows Registry database. You can get this information from Services Console or SQL Server Configuration.
For example, to get account information from Services Console.
1. Go to Start > Run > Services.msc
2. Right Click on SQL Server Service, i.e. “SQL Server (InstanceName)” and go to properties
3. The account information is available under Log On tab.
Or you can get the information by using DMV and so on.
SELECT servicename, service_account FROM sys.dm_server_servicesGO
If you now log in SQL Server by using sysadmin account, you can check all login names in security and find the original account to login.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
How could I create a "Linked Server" link from SQL Server 2008R2 64-Bit to Oracle Database 11.2 64-Bit?
Let's say the SQL Server and Oracle Database are in the same Company Internet Network.
I have the code, but I do not know how to use it. Such as what is System DSN Name? Where could I get it. What does it look like?
Do I need to install any Oracle Client Software in order to link from SQL Server to Oracle? Or SQL Server has the built-in drivers installed already that I can directly create a Linked Server from SQL Server to Oracle?
I need to know details. Thanks.
USE master
go
EXEC sp_addlinkedserver
@server = '{Linked Server Name}'
,@srvproduct = '{System DSN Name}'
,@provider = 'MSDASQL'
,@datasrc = '{System DSN Name}'
EXEC sp_addlinkedsrvlogin
@rmtsrvname = '{Linked Server Name}'
,@useself = 'False'
,@locallogin = NULL
,@rmtuser = '{Oracle User Name}'
,@rmtpassword = '{Oracle User Password}'You need an OLE DB provider for Oracle. There is one that ships with Windows, but it only supports very old versions of Oracle. Oracle has an OLE DB provider that you can use. I don't know if it's part of Oracle Client or how it is bundled.
You should not use MSDASQL or any DSN.
Erland Sommarskog, SQL Server MVP, [email protected]
Maybe you are looking for
-
How to add a list view from a parent site to a subsite
I have a custom list in a parent site, and I would like to display that same list (perhaps with a different view) on a page in a subsite. Is there a straightforward way of doing this?
-
Trouble with booklet printing -- InDesign CC 2014
I'm having trouble printing booklet with new CC 2014. I print to postscript, but then PDF is not correct. I see it's using Acrobat 8 driver; how do I change that to Acrobat XI?
-
HT1976 Iphone 4s signal dropping to no service
My iphone 4s giving me no service I have to restart phone every 5 min When I restart i get full signal and after few second It start dropping and stop on 2 bar and after few more seconds it give no service. What cloud be the issue ? Its hardware (if
-
Which graphics card am I currently using?
Which one is it?? I've been playing BF3 on my retina these days and I've noticed that it's gotten a bit slower
-
I am having an issue using InCopy and the macro section. I am a new user to InCopy, and I'm trying to figure out how to: Use a code that means something. For example: AB = $5.00 On my document, I at all times want AB to be there until I tell it to in