How do i set hd video resolution?

I am confused... what is this talk of HD video recording on my 4th generation iPod Touch, when the resulting videos are 568x320? I cannot find a place to set the resolution.
What am I missing?
chris

Well, that was helpful. There were a whole bunch of resolutions in there, and ironically, UHD30 was at the top of the list (like it was Preferred or something).
I changed the res and the mouse movement immediately became smoother. However, after about 9s, the screen went dark for about 2s, therm came back. I'm going to have to see how stable this turns out to be. But it looks really good right now.
I may grab the EDID, parse it, and but some insights about it here. I did searches for UHD and 3840, but did not find anything useful. And there should be
-n-

Similar Messages

How do i set up video call between two huawei y550

how do I set up video call to two huawei y550

Hi,
When you go into the contact you want to call is there not a little portrait icon/phone as this would be your video calling button.
Thanks,

HT1498 How do I lower my video resolution using my apple tv

How do I lower my video resolution using iTunes on Apple TV?

how you lower your resolution when you run your appletv?
or how you lower your resolution when you airplay mirror from your computer or ios device
if the former then in the settings of your appletv

How can I set multiple videos to "TV Show"?

I'm importing an entire season and they all default to "Movie". So, I know that I can set the video type to "TV Show", but if I select more than one video, there is no "Video" tab. Does anyone know how to set the types of multiple videos at once?

This is a good question and I haven't found a method yet either. This seems to be an oversight on Apple's part.
Message was edited by: Conal Ho

How can i set photoshop image resolution

how can i set image resolution so that opening an image into photoshop CS5 the image will always be at a certain resolution, such as 240ppi?

never mind. i must have overlooked it 20 times while going thru preferences.
need more caffeine.

How can I set a custom resolution on a MacbookAir for an external monitor?

I've been trying to set a custom resolution on my macbook air for an external monitor but the only options displayed are 1280x1024 and 800x600. How can I bring up more options? Thanks!

Your Mac sets those resolutions (and the display NAME) based on the information your display provides when a query is sent at Startup. If those are the only resolutions shown, then your display has said that is all it can do.
What display is this, and what Interface is being used?
This pane will tell you more about what the display has reported:

How can I set a video transition at a default length ?

I want to set the length of a video transition at a 2 second default. How can I do this /

Depending upon the version, Edit > Preferences >....."
Only transitions applied after the change will be affected.

How can I set the screen resolution ?

hello brothers.
my program works ultimately at 1024/768 screen resolution.
since I want to make sure that peaple who using that program will see it correct, I want to explicitly change the resolution of the screen.
how can I do that? please..

I believe you use the setDisplayMode() method of the GraphicsDevice object to do this.
If you go to http://www.scottshaver2000.com/ and download the source code to H.E.A.T., you will find a nice example of video mode switching. His game pops up a window showing the available configurations, then lets you select the one you want and switch to it.
The applicable classes are in his com.sas.gui package: FullScreenJFrame.java and VideoModeSelector.java.
Rick

How do i set Preset "High Resolution" in save as EPS script

Hi,
I am writing my own Illustrator scripts to automate the workflow.
I haven't been able to fix a Preset "High Resolution" in the transparency section of the EPS-option dialog.
Is there a way to set that option by script?
It would be great if anyone help an idea of how to solve it.
MOhan

Thanks.
My issue is as per my workflow need to supply PDF to clients.
Same is converted from Adobe Illustrator>Concert to EPS>Distill and PDF is ready.
While converting through Script process some of the text's converting in pixels.
Same if converted without script it comes in good quality.
Please advise.

How do I set the 4k resolution?

I have a MacPro with dual D700 and 6xDP and HDMI1.4. The latter is limited to 4k30 (UHD24-30 and C4K24) by the standard. I have connected this port to a Samsung 40HU6950 4k TV that supports all four HDMI 4k modes.
The MP is defaulting to C4K and thus outputting 4096x2160 at the only supported refresh rate of 24Hz. I would rather run it at UHD30 (3840x2160p30) because (a) the refresh rate will be 25% higher and (b) I will reduce the scaling artifacts that the 6.6% reduction from 4096 to 3840 may be causing in the TV as the panel is really UHD.
The displays Control Panel for the Sammy does not give me any options, only "what is best for this TV" and five Scaled options (which are all zoom modes). However, the latter is still using the C4K resolution. I would rather the output be UHD30 with chosen Scale level, but that's not how the system operates (yet). Regardless of how the visual elements are scaled, I should be able to choose between the timing formats.
The reason for this is the mouse movement is laggy and non-fluid. When vendors start selling DP-to-HDMI2 dongles in a couple months, this nightmare should be over and I can output 60Hz. But I really want it to be UHD so every incoming datum matches with a screen element (fixing 'b' above).
Theoretically, I could remove the EDID from the Samsung and reprogram it to NOT have C4K, but this is extreme and not what you would do while still under warranty. It also presupposes that the EDID is not embedded in the silicon and can be removed. An alternative would be to use a "golden EDID", which is where the data structure is held within the Mac itself and the one in the TV is ignored. This is used when TV's is wrong or bad
Thoughts?

Well, that was helpful. There were a whole bunch of resolutions in there, and ironically, UHD30 was at the top of the list (like it was Preferred or something).
I changed the res and the mouse movement immediately became smoother. However, after about 9s, the screen went dark for about 2s, therm came back. I'm going to have to see how stable this turns out to be. But it looks really good right now.
I may grab the EDID, parse it, and but some insights about it here. I did searches for UHD and 3840, but did not find anything useful. And there should be
-n-

How do I maintain consistent video resolution in primary and tablet views?

I have a module that includes a screen shot, followed by a video demo of the screen scrolling, followed by another screen shot. Everything flows smoothly in the primary view. However, things change in the tablet view. When showing the scrolling video slide, the tablet view increases the resolution to show the entire recorded screen. This differs from the screen shots on slides before and after that show just what can fit in the tablet view. Is there any way to reduce the resolution of the video demo slide to match the rest of the slides?
Thanks,
Darin

aggro
What version of Premiere Elements are you using and on what computer operating system is it running?
This sounds like a split screen effect to me.
If so, one view on Video 1 and the other directly above that is the other view on Video 2.
Then crop each so that each occupies 1/2 the Edit area monitor screen.
(generalized since I do not know your program version, see effects Transform/Crop).
I wrote the following in 2011 for a Premiere Elements 8 user in another forum
Your basic tools to achieve your goal are Crop Video Effect and Horizontal Flip Video Effect.
Video ONE on video track 1.
Video TWO on video track 2, directly above Video ONE.
Highlight Video ONE on video track 1, Edit Mode/Effects/Video Effects/Transform/Crop, followed by adjusting the crop under Edit Effects (see bottom of Effects Panel) so that Video ONE occupies the left half of the screen.
Do the same for Video TWO on video track 2, Edit Mode/Effects/Video Effects/Transform/Crop etc. so that Video TWO occupies the right half of the screen. BUT end with Edit Mode/Effects/Video Effects/Transform/Horizontal Flip.
Highlight the video on either side to make adjusts in the Properties Palette and appropriate Panel (position, cropping, etc). But, remember that if you make changes in the "flipped" right side of the screen, Edit Effects/Crop Panel right option will be for left and left option will be for right.
You may or may not need the "flip" part of the effect.
Please review and consider. If I have misinterpreted your question, please let me know with details and I will rethink what you seek.
Thanks.
ATR

HT5019 how do i set display / video mirroring to be default?

I've got a TV connected to my Mac, and when I boot up, I have to manually set display mirroring. Can this be configured as a default setting?

There's an add-on for that.
Usually I suggest this one, but it's not yet updated for Firefox 5:
[https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/ New Tab Homepage :: Add-ons for Firefox]
So you could try this one:
[https://addons.mozilla.org/en-US/firefox/addon/newtaburl/ NewTabURL :: Add-ons for Firefox]

Retrieve what video resolutions(quality) a youtube video has, with youtube api or packet analysis

a youtube video is usually with multiple video resolutions (quality) like 240p, 360p,720p,etc how can I retrieve what video resolutions(quality) a youtube video has are there any youtube api which can get this information
I think If I capture the packets when I'm watching a video, by analysing the packets, definitely I can know what resolution this video provides but I don't know which part the packet provide this information does anyone know this? thanks!

I am no iPhone expert, but I believe it has to do with what connection you are using.
I noticed this the other day, I watched a YouTube vid the other day connected to my home wifi, and it looked amazing. Then I went to show a co-worker the same vid while on the 3g network. It looked like crap, all large pixels and blury. Anyway that is what I noticed.

Setting video resolution

Hi everybody.
I have an ipod touch 4th generation, 64 GB
I wanna know if it's possible to set video resolution of camera. If so, how I can do. If not, what's the default resolution?
Thank you in advance
Have a nice day

You can't change the video resolution. The resolution is 720P

How do i set hd video resolution?

Similar Messages

Maybe you are looking for