How do I set up multiple websites with different web addresses?

I created a website several years ago using iWeb and purchased a domain name from GoDaddy. I am creating another website still using iWeb and I have already purchased the new domain name. How do I separate the two websites in iWeb? I am using my mobile me account and have plenty of space.
Any help is greatly appreciated.

Asked & Answered in the proper forum :
https://discussions.apple.com/thread/3123362?tstart=0

Similar Messages

How do I set up multiple users with different configurations

I have a Mac Pro that is shared by multiple users. Some edit using Avid Media Composer 6.0, and some edit using Final Cut Pro 7. Our client monitor is connected using a Matrox MX02 Mini. When I install the latest drivers for the Matrox MX02, I can use the client monitor with Media Composer, but not Final Cut Pro 7. When I back-rev the drivers to support Final Cut Pro 7, I can't use the MX02 in Media Composer.
Is there a way to set up two users -- one for Avid editing and one for Final Cut editing -- that will each load different sets of drivers?
Thanks!

Not in one boot system. The only way I can think of doing what you want is to dual-boot - ie, either partition a single drive with two volumes, one for each configuration, or, if you can, use separate physical drives. The Matrox drivers are loaded at the system level, not the user level.
If you have a spare drive, you would just clone your system across using Carbon Copy Cloner / SuperDuper, then boot to the second system and adjust the drivers as necessary.
Matt

How do I send docs to multiple signators with different email addresses on Echo sign ?

How do I send docs to multiple signators with different email addresses on Echo sign ?

Thanks man...the problem could be on the signators side.
Rick Schell...Realtor, ABR
www.rick-the-realtor.com
Cell 615-804-3085
Crye-Leike Realtors
Office 615-373-3513
Fax 615-373-5228
Quoting Echosign-Rob <[email protected]>:
Echosign-Rob created
the discussion
"How do I send docs to multiple signators with different email
addresses on Echo sign ?"
To view the discussion, visit:
https://forums.adobe.com/message/6395941#6395941
>

How can I pin multiple instances of Firefox to the taskbar in Windows 7 with different web addresses

I pinned Yahoo Mail to my taskbar by dragging it down from the desktop. When I try to do that with a second address, it doesn't pin the second address, only a second copy of Yahoo mail.

I just set Safari's option to None. That is I right clicked on the dock, selected options, and chose none. Also, in Mission Control's tab of System Preferences I clicked Off When switching to an application, switch to a space with open windows for that application. That let me open a new Safari window no matter what desktop I was in. But I had to do both. Just setting the desktop option to none didn't seem to do it. Finder seems to work okay with just the none option set.

How to I set up multiple devices with iMessage so I don't have multiple conversations?

My family has two iTouchs and 2 iPhones. I have all 4 set up on the same apple ID so when purchases are made from the app store or iTunes then is comes from one account. The problem I am having is texting. When the iPhones text either of the iPods it comes from the email address linked to the apple ID. Therefore the iTouch users can't tell which phone it came from (ie mom or dad). Sometimes however it will show up on the iTouchs from the iPhone phone numbers. Sometimes when sending a message from iPhone to iPhone it will show up as sent from the email address associated with the apple ID. My questions is is there a way around this or do I need to set up a different apple ID for each unit?

Not in one boot system. The only way I can think of doing what you want is to dual-boot - ie, either partition a single drive with two volumes, one for each configuration, or, if you can, use separate physical drives. The Matrox drivers are loaded at the system level, not the user level.
If you have a spare drive, you would just clone your system across using Carbon Copy Cloner / SuperDuper, then boot to the second system and adjust the drivers as necessary.
Matt

How we set up multiple websites on OSX Server

BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!

OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John

How do I set up multiple iMessage emails with one Apple ID?

We have one Apple ID and many family members with iPads, iPhones etc... As it stands we all receive all incoming imessages and this is impracticle moving forward.
Other than setting up multiple Apple ID's how do we set up each user with an individual iMessage address?
I understand how to do this using a phone numbers but cannot stop all users getting imessages sent to the Apple ID email address. I have tried inputting secondary email addresses but get error messages advising "account already in use".
Long story short.....Can I set up all family devices on the one apple ID but designate each member with an individual email address that precludes them from receiving iMessages sent to the "master" Apple ID address?
Phew
Thanks

To my knowledge, yes, this is impossible. Your primary iMessage account is your AppleID account, so as long as you all share the one AppleID, then all messages will appear on all iOS 5 devices using that AppleID for their iMessage account.
The only thing to do is have people set up their own iMessage ID. They can stil then set up unique "receive at" addresses, but these are really additional addresses for messages to go to, and do not get around the fact that the account itself is defined by the AppleID.
P.S. there is nothing stopping you from using the one, common AppleID for the iTunes and app store, then setting up a new one and just using that for iMessage.

How do i set up a slideshow with pictures from multiple iphoto libraries?

How do i set up a slideshow with pictures from multiple iphoto libraries? One library is in my Macbook Harddrive, the other 2 libraries are in an external harddrive. Thank you!!

You can't, simply. An iPhoto Slideshow can only draw from a single library, so you'll need to get all the images into one.
Alternatives to iPhoto's slideshow include:
iMovie is on every Mac sold.
Others, in order of price:
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $99
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

How can I set up multiple spaces (desktops) on my new MacBook Pro 10.9.5? I have six set up on my other computer MacBook Pro 10.8.5 but can't find how to do it on this new one. Would appreciate help on this. Cheers.

How can I set up multiple spaces (desktops) on my new MacBook Pro 10.9.5? I have six set up on my other computer MacBook Pro 10.8.5 but can't find how to do it on this new one. Would appreciate help on this. Cheers.

It's not completely obvious. What you have to do in Spaces is to position your cursor to the upper right of the screen, after which faint + (plus) sign appears in that area. Click that, upon which another Desktop will appear.
The + may be difficult or impossible to see with some desktop backgrounds (black, for instance):

Created multiple websites with iwebsites, now need to save multiple domains

I have created multiple websites with iwebsites on iweb 06, now I want to save these sites so in case there is any problems when I upgrade to 08. How do I do this?

Hello Paul,
You need to locate the Domain files for each website. You should find these under your account (the house icon in the finder)/Library/Application Support/iWeb.
Vonz.

How to send notifications to multiple person with same role and with result

How to send notifications to multiple people with resultout as approve/reject?
We are looping the notification by attaching a cursor query to find the different emp nos to send for approval.
I cannot associate a role because these emp nos are sub-set of a role which I have created and i am getting thru the cursor query.
For FYI notification there is no problem, but for approval notification, I am not unable to send approval notifications to all the people.It stops at the first person in the loop.Pls suggest alternate way. Thanks in advance.

Manju,
I would use the cursor to populate the API for creating an ad-hoc role within the workflow process as a function. Then set your notification performer as the ad-hoc role.
Here is an example function:
create or replace procedure sample_emp_fill(itemtype in varchar2,
itemkey in varchar2,
actid in number,
funcmode in varchar2,
resultout in out varchar2) as
cursor get_name is
select ename from scott.emp where mgr = 7839 and empno != 7566;
role_name varchar2(50);
names varchar2(500);
begin
if (funcmode = 'RUN') then
role_name := 'ad_hoc_role_'|| itemkey;
for row in get_name loop
names := names || row.ename || ' ';
end loop;
WF_DIRECTORY.CreateAdHocRole( role_name=>role_name,
role_display_name=>role_name,
language=>'AMERICAN',
territory=>'AMERICA',
role_description=>role_name,
notification_preference=>'QUERY',
role_users=>names,
email_address=>' ',
fax=>'',
status=>'ACTIVE',
expiration_date=>'');
resultout := wf_engine.eng_completed||':'||wf_engine.eng_null;
return;
end if;
end;

How do i set a multiple colors for a panel

hi all,
how do i set a multiple colors for a panel .pl desperately need a solution.
regards
bhaskar

Iam contradicting self !
Hope this helps !
java.lang.Object
|
--java.awt.Component
has the paint method ! Take the Graphics Object and call Graphics.setColor( Color.red ) .. and u can draw regular shapes like fillRoundRect. blah blah.. u need t count on the pixels .. I guess..
An easier choice could be adding labels or panels with a layout of ur choice ..
venu

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How do i set up multiple iCloud accounts on the same mac?

how do i set up multiple iCloud accounts on the same mac?

Interesting - I was sure I'd seen a note somewhere that it was only Mail, but this article:
http://support.apple.com/kb/ts4020
does say
Your secondary iCloud accounts can be set up and viewed in Settings > Mail, Contacts, Calendars on your iOS device, or Apple () menu > System Preferences > Mail, Contacts, Calendars on OS X Lion. You may choose to do this if you have a second iCloud account and need to access its Mail, Contacts, or Calendar data.
Note: While you can configure multiple iCloud Mail accounts in iOS, Push mail will only work for the primary iCloud account in iOS. Secondary account(s) will check for mail based on the settings in Settings > Mail, Contacts, Calendars > Fetch New Data.
It's not something I can test - I suppose the second account's data gets added to the lists in iCal and Address Book?

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How do I set up multiple websites with different web addresses?

Similar Messages

Maybe you are looking for