How do I share a custom PDF export setting?

I have a PDF export setting that I use for a specific printer in my shop and I want to provide it to a customer.
I'm on a Mac running Maverick (OSX 10.9.4)
Where does the setting file live and how does my customer install it?
thanks

Hi pdndesign,
Check the location: Hard Drive > Library > Application Support > Adobe > Adobe PDF > Settings
Regards,
Rave

Similar Messages

Custom PDF export changes colour from CMYK to RGB!

I've created a custom PDF output setting (based on the preset "Press") for hi resolution output. The files are created in inDesign CS5 - CMYK and several spot colours too. I can check the output-preview and it looks OK. When I check the output preview of the PDF (or the film/plate seps ahhh!) they have been converted to RGB. How do I keep the separations in CMYK?

Over the years I've learned plenty of lessons the hard way, and they're the ones that really stick.
In theory when sending an ad to various publications I'd try to send something that correct to each, but in practice that's essentially impossible, so I tend to convert everything to SWOP 2 (you'd be amazed how many newspapers use SWOP 2 COATED as the working profile in this country), admit that colors will never be perfect or match across multiple pubs because my clients can't afford the costs of making that happen, and leave out the profiles. I'd rather have crisp type than slightly better color from a conversion, but that's me.
But I do now include the profiles and I use the profile the printer tells me to use - the only way I'd get rich black type, I think, is if the printer ends up using a different profile than what they told me, right?
That's correct. If that happens, it's time to get another printer.
Including the profiles - I thought - would somehow let the prepress know "actually this file was made for a different print process".
I suppose it might, if they look and if they care.
Why is the option to include profiles there?
I think this is really intended for when you DON"t convert colors during export, as with PDF/X-4. If the colors are not yet converted, you need to know the source profile to get the destination color correct.
I don't want to give anyone the idea that it would be a mortal sin to include profiles as a matter of routine. I just want to point out that doing so MIGHT cause unexpected results in some circumstances and that it's important to know what can go wrong. Also, there is no guarantee that leaving colors unchanged and including profiles is going to get you good color on the far end. It all comes down to the skill level of the person doing the prepress.

Where are custom pdf exports stored?

I have a new computer and migration assistant was too assisting. I have many custom pdf exports for various uses. I am having trouble finding them on my old mac. Can anyone tell me where to look?

You can check at the below location it may help :-
Users > [yourname] > Library > Application Support > Adobe > Adobe PDF > Settings
The Users library folder could be hidden on Mac 10.7, if so :- http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html
this might help

How do I cancel my ADOBE PDF export subsciption

How does on go about cancelling a PDF export subscription?

If you feel you need a refund, you should contact customer support. Go to the contact support page:
http://helpx.adobe.com/contact.html?product=acrobat-com&topic=signing- in-to-my-account
Click the "I still need help" button. I'd recommend Chat ( http://www.adobe.com/support/chat/ivrchat.html ) if it is available. It is usually faster than phone support.

How do you include date in PDF export from Keynote 6.2.2

In Keynote '09, I used to be able to insert the date in the bottom of a PDF export. Now that I upgraded to Mavericks, Keynote (6.2.2) appears to only have the option to "include name and date".
That's a useless combination. Those are 2 different things: (1) the filename, and (2) the date. At best, those should be two separate checkboxes.
I miss the feature to add ONLY the date to the PDF generated. I haven't upgraded to Yosemite yet but don't have my hopes up that this feature exists.
Am I missing something? How can I include the date in a PDF exported/printed/saved from a Keynote presentation?

Events are purely automatic, and will only organise on the date and time.
Make an Album of the photos and then you can drag them to any order you want.
Regards
TD

How do I share or upload pdf to google drive

I have a Google Drive account that I store work related PDF's to. My PDF's are sent to me via my employers website. I have tried to figure out how to download and save the actual PDF to my IPhone 4 and then upload that same PDF to my Google Drive acct. Cant figure it out.
I am new to the IPhone. I have an IPhone4. I moved over from Android as my employer got us these phones so wasnt given an option.
Issue 1: How do I save a local copy of my PDF to my IPhone 4? Every time I click the link, it opens a browser. When I hold the link, it asks me to open in new tab or copy link url. It gives no option to save the link as a pdf. Is this possible to do?
Issue 2: I have tried to upload other things like pictures to my drive. When I click on the "Share" button, Google Drive is not listed in options. Is there a workaround for this?
I have searched for help on the web but theres too much info to sift through.
I would appreciate some input on this. Thanks
TL
PS if this question is in the wrong forum, I apologize. Feel free to move it to the approriate location

Hello jazmezzer,
Thank you for using Apple Support Communities.
For more information, take a look at:
iMovie '11: Publish a movie to YouTube, Facebook, Vimeo, or CNN iReport
http://support.apple.com/kb/ph2279
Have a nice day,
Mario

How to select color space for PDF export in Aperture 3

If you're exporting a book layout as a PDF for printing by a third-party album company, you may need to specify sRGB as the color space for images in the PDF. That's OK if your book is composed of JPEGs that are already in the sRGB color space. But, if your images are RAW, Aperture will export them into PDF using the Adobe RGB color space by default. Sending aRGB images to an sRGB printer will result in flat, unsaturated colors, as I learned the hard way. Apple tech support was unable to tell me how to handle this, but I stumbled on the answer myself. Select the book in the Library pane. Select File > Print Book. In the resulting printer dialogue window, pull down the Color Profile menu (default: No Profile Selected) and select sRGB or whatever target color space you desire. Then, click the PDF button and select Save as PDF. Presto! Your PDF images will now be in the appropriate color space.

Hi again, here some updates.
the issue is still there.
From Aperture, I tried to export to PDF the single images, and they look good (no posterization).
Furthermore, I created a photo book from iPhoto with the same pictures, and exported it to PDF. It also looks fine.
Also opening/exporting to PDF from photoshop does not show any problem.
The problem occurs only if I try to print the book from Aperture (option "print book" -> "save as PDF"), or if I make a book preview before placing the order (I suppose it's the same action).
Is anybody aware of what exactly Aperture does in these particular cases?
Please consider that:
1. my monitor (iMac 24") is hardware calibrated
2. the source pictures are in RAW (so no color profile on them) and (just a couple) in TIFF (16bit, Adobe RGB). I also tried reimporting in the album jpg converted versions, with no better results.
3. OS and Aperture are updated to the latest versions.
This problem is blocking me from placing the order...
Someone could give some help here?
thanks in advance
marco

How do I share an Interactive PDF via CC

I'm trying to share a pdf interactive file of an ipad magazine that I created in Indesign. Please let me know if there's a way to share it using Creative Cloud Connections File Folder or any other route

Yes you can share a pdf file. Upload the files to the Files page at https://creative.adobe.com/files and then use the Send Link to share it. You can enable download or not. There is multi-page preview from the browser.
You can also upload the file using file syncing (what was called Creative Cloud Connection previously).

How do I get Forms Central pdf export to include header image?

I made it work once, but I can't seem to make my exported form retain the jpg image i placed in the header. Any ideas?
~joel

Hi Michael,
Sorry for the confusion. The Contact Us link at the bottom of that page offers several different contact options (either chat or phone). For your convenience, here is the phone number: 800-833-6687.
Best,
Sara

What PDF export settings to use for highest possible resolution printing?

I use indesign to create a roughly 68-page marketing booklet. The document is landscape and setup to print on 8.5" x 11" as a landscape book with facing-pages. I upload a PDF to a professional printing company to print a full bleed booklet. The book usually includes roughly 15, full-page, high resolution images as well as numerous other high resolution images throughout so it is important that the resolution is as high as possible and the images come out clean when printed.
On my old computer, I had a custom PDF export preset that I used to produced hi-res, print quality pdf's that were approximately 528MB in size. I recently got a new computer and I lost that old Preset... Now, when I use the "high quality print" default setting, the file size is about 74MB, much lower than what the documents used to be. I have played around with some of the settings, but I still cannot get the files to come out near as large as they used to be.
Is this an Indesign doument setup issue, or an export issue? What settings should I use in order to produce the largest, highest-quality, highest-resolution PDF possible?
Thanks for an input and guidance!

The size in mb is pretty much irrelevant and is going to vary with the number of pages and the type and quantity of graphical content.
The HQ Print preset downsamples raster art to 300 ppi if it's over 450, and uses jpeg compression to reduce file size. This is usually more than adequate for commercial printing. For fine art printed at a 200 lpi screen you might want to change the downsampling to 350 or 400 ppi and use zip compression (lossless) or no compression at all. I suspect your custom preset used no compression, and might not even have downsampled, but there's no advantage to sending more image data than the RIP needs to process the image.

Accessing Custom Controller from setter and Getter methods

Hi Gurus
How can we access the custom controller from setter and getter methods,is there any way to do that.
Thanks & Regards
Rajasekhar

Hi Steve.
Thanks very much for valuable information, the main controller class is getting tracked in mo_owner which is declared as CL_BSP_WD_VIEW_CONTROLLER, and I'm getting the reference through
mo_owner ?= owner. (since mo_owner = owner is not getting converted of type mo_owner ). After doing this on whatever the contexnode class (say zl_xxxx_xxx_cnxx) the corressponding context node values are getting turned as <#ERROR IN METADATA.
I mean when I'm checking the configuration in bsp_wd_cmpwb configuration tab -> Available Fields->Enlarge the contex node->BTSTATUS (say for Example) there the values are showing as <#ERROR IN METADATA , After executing the above procedure
I cross checked several times before and after redefining the context node method IF_BSP_MODEL~INIT, before redefining this method UI is working fine, after redefintion UI is throwing below error .
Exception Details
CX_SY_REF_IS_INITIAL - Dereferencing of the NULL reference
Method: CL_BSP_MODEL=>IF_BSP_MODEL_BINDING~IS_ATTRIBUTE_VALID
Source Text Row: 13
Thanks & Regards
Rajasekhar

How do I get a refund on Export PDF that has ALREADY been agreed

On 1/21-1/22 I tried to 'renew' a subscription for Export PDF. By some error (maybe mine - I just dont understand the whole thing) my Bank was immediately charged for two subscriptions, each at a different price. I immediately "chat"ted with several reps (it was difficult to get onto the chat and find out how to cancel) and was assured that both would be cancelled and refunded. They weren't!
I waited a week. Was again frustrated by the chat hookup, and tried the 'cloud' retail product tel #, assuming it was wrong but that I could be switched to the correct one. Had a very pleasant chat, was assured that both would be cancelled and refunded, received 2 e-mails confirming the cancellations, each with a seperate "Case #". Felt pretty good! It had only taken me a week of reasonably diligent effort to get a very simple thing done! IT WASN"T DONE! (Yes, I apologize - I know I'm loud - but by now I've got steam coming out of my ears!)
Today I got an e-mail, telling me that the refund had been processed and the case # would be closed. I looked at my bank, and only one had been refunded! I reviewed all the other e-mails and the notes from the telephone calls and chats to be sure I hadn't misunderstood something. But, no I hadn't. I went to my Adobe on-line and looked up 'my orders' history. Sure enough one had been invoiced and refunded ( the lesser charge of the two) but the other had ONLY BEEN INVOICED - NOT CANCELLED. And it seems that every piece of this transaction generates a new "order" , "case" or some other "reference #" - none of which are tied together, except by the invoice amount, when it is mentioned - which it typically IS NOT.
My question, then, is : How can I get past this absolute frustration over every aspect of my interaction with Adobe and GET THIS TAKEN CARE OF?????????

Hi Stacy,
    What frustration? (Just kidding !)
    As I mentioned, one of the two charges has been refunded. Credited by
Adobe on Jan 28, I believe I received it in my bank on Jan 30.
    The other charge, $25.37 of order # AD011017507, has not been received
by my bank yet. But this can't be that much of a surprise, and has nothing
to do with "10 business days" for refunds to post.
    To this minute, "My Orders" on Adobe website shows that the order #
AD011017507 was invoiced on January 22, but that no credit invoice has been
posted against this order to this moment!
    Can you begin to understand the frustration of being unable, through
all attempts to untangle this mess, starting within one hour of the original
order, with I believe nine different "Chats", telephone calls and, finally
a "problem" posting, stretching over more than thirteen days. Of course
it doesn't make much sense to devote this much attention to less than $50
worth of stuff, but I do not let things like this dangle.
    And can you imagine how loathe I am to deal with Adobe for fear of
some real problem?
    At any rate, I would certainly be pleased if you can suggest a way for
me to extricate myself from this. Any help would be GREATLY appreciated!
    Thanks for your time and any trouble,
    Stephen Ellis
    <removed by admin>
In a message dated 2/3/2014 4:08:59 P.M. Eastern Standard Time,
[email protected] writes:
Re: How do I get a refund on Export PDF that has ALREADY been agreed
created by StacySison (http://forums.adobe.com/people/StacySison) in
Adobe ExportPDF - View the full discussion
(http://forums.adobe.com/message/6082008#6082008)

How can I share PDF documents in Ibooks

How can I share PDF between my Apple devices with Ibooks? I have on my Ipad a lot of PDF manuals that I want to see on my other devices so I don´t need to download them to Ibooks on every device. Sync is on in the setup but it seems only to work with books and not PDF.

No - it will not work with PDFs. You might consider another cloud service such as Box, DropBox, or Google Docs.

How do I share a new project on imovie if the export option is greyed out and not an option?

how do I share a new project on imovie if the export option is greyed out and not an option?

nicoleking wrote:
... I heard that if you bring in your old iPhone, they will give you a new one with some kind of fee, but I don't know how that works.
https://discussions.apple.com/message/22920500

How to insert a pdf export button in a module

Hi,
I would propose a way for my students to realize easily a pdf export of one screen. The goal is that students save a file with a drag and drop exercice in order to re-use after.
So, I tried :
- Use a shape and execute Javascript, window.print(). I had think to say students to use pdf export instead of print. In my case, print works only in html5. In flash, only the background is displaying.
- Use the print widget of captivate. It works but it's hard to use it. Student needs to edit properties to choose layout / paper size. Otherwise, some part of the screen are not displaying.
So I'm looking a solution to insert a pdf export button. Idealy a student clicks up the button and screen will be export in pdf format. I try this wdiget (http://captivatedev.com/2012/07/25/adobe-captivate-6-x-widget-dynamic-pdf-export/) but we can export only variables.
Anyone has a good idea to share ?
Best regards.
Clément

Thank you Pat. The thing is that i can´t upload any document to the web server because it belongs to "Jimdo". They give the option with a kind of Plugin and the Pdf comes directly from your browser to be download from the visitors, but it look ugly. That´s why I inserted a link to go to another page (different server) where I can upload documents. I think a need someone who know Jimdo.
Thank you

How do I share a custom PDF export setting?

Similar Messages

Maybe you are looking for