How do you get an iPad 1 to work through a projector?

I have the special cable that connects the iPad to the projector but unlike with a laptop, where one presses something like F6, I don't know what to do to make the iPad and the projector see one another.  Any ideas?  I am simply trying to run Keynote as a presentation.
Thank you.

To the best of my knowledge - and this is just with using the TV attachment for my Touch, as soon as you plug them in the ipad should be sending the image out. Have you checked the input on the projector? Made sure it's set to the right input?

Similar Messages

  • How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

    How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

    If you have iOS 5 installed on it, you don't need a PC.  simply turn it on and set it up.
    if you don't have iOS 5 then you'll need a computer.

  • How do I get my iPad to work. It won't slide to unlock

    How do I get my iPad to work. It won't slide to unlock

    Push harder! 
    Seriously...
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How can i get the ipad to work because my little brother put a password on it and it now is blocked and cant get into it ???

    how can i get my ipad to work because ,y little brother put a password and cant get into it ???

    You must restore the iPad with iTunes.

  • My ipad 2 just shows itunes and plug icon my computer wont take new version of itunes too old how do i get my ipad 2 working do not care about saving data just want to use this very expensive useless item!

    My ipad 2 just shows itunes and plug icon my computer wont take new version of itunes too old how do i get my ipad 2 working do not care about saving data just want to use this very expensive useless item!

    My iPad2 works great now after IOS 8.1 Update
    I did my iPad2 update thru iTunes on my iMac and it was sucking the iMacs memory very low during the update. Safari froze before loading the first web page and I did a hard boot and went fishing as I saw where it was going to take a long time to recover. When I tried again it wasn't quite right and then did one more hard boot and then did a Reset by going to General-Reset-"Reset all Settings" and it works real well now without loosing any data and in-home wi-fi clocks at 17Mbps download. Probably like most of you I’m sticking with OSX 10.9.5 Mavericks as it gets the job done very nicely and don’t need all that extra fancy stuff that probably will slow things down.

  • HT4623 How do you get your Ipad out of restore mode

    How do you get your Ipad 3 out of restore mode? I ended up there by mistake.

    Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • How do you get your ipad unlocked if you forgot your password and it became disabled?

    How do you get your ipad unlocked if you forgot your password and it became disabled?

    The instructions on this page should let you reset your iPad : http://support.apple.com/kb/HT1212

  • How do you get the radio to work ?? - says no radio signal but headphones are plugged in ??

    How do you get the radio to work?  Is another app or download required?  Its a new Ipod nano - 8G, box doesn't say anything about "generation" ?? Appreciate any help
    cr8tivsolutions

    ok, I see now the plug has to be pushed in really tight until the white is flush with the nano

  • How do you get gif's to work on a mac

    how do you get gif's to work on a mac

    Here yah go.
    Install the software at the link below
    This will allow you to view animated gifs in preview
    click on the gif to select it and then press the spacebar
    http://sourceforge.net/projects/animgifqlgen/

  • For OS X 10.3.9 Panther how do you get Flash 9 to work after downloading it?...

    For OS X 10.3.9 Panther how do you get Flash 9 to work after downloading Flash 9 ?... for the link at
    http://www.universalhub.com/node/24494
    "To watch this video you need Flash 9
    You have an old version of Flash. Fortunately we can upgrade
    your computer to Flash 9 without without any hassle. Just click on the
    upgrade button - you don't even need to leave the page!
    [ Upgrade now! ]
    After Flash 9 is downloaded, you'll need to restart your browser.
    [ Download and install manually. ]"

    Hello Again Don,
    It appears you have been struggling with this issue since November of 2008.
    Have you considered upgrading to a newer version of OS X instead?
    11/20/08 What workarounds are there for OS X 10.3.9 users on websites with flash
    4/12/09 How do you get the current Flash to work with OS X 10.3.9 ?...
    5/25/09 After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...
    8/9/09 How can OS X 10.3.9 users view Flash on websites?...
    8/9/09 How do you get Flash 9 to work with OS X 10.3.9 ?...
    ali b

  • How do I get my ipad charger working when i've only had it for 3 months

    I plugged my ipad in when it said low battery. Then it got very hot and said unable to support this device. Then i thought it might be the outlet, so i plugged it in somewhere else. When I left in alone for about, 5 minutes and came back to check on it, The ipad was dead plugged in. I got this ipad in November and the charger came with it, the ipad was brand new and not used! So i have no idea why it is not working! and if anyone has any idea please help. Also I am unable to go to a store to see what the problem is, because of the current snow storm!
    Thank you,
    LOLAJEAN7

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/http://www.apple.com/retail/geniusbar/
    In the meantime....
    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.htmlhttp://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.htmlhttp://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abouhttp://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging-http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipahttp://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.htmlhttp://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.htmlhttp://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-iphttp://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipadhttp://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xzhttp://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.htmlhttp://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • How do you get your volume to work on video?

    Please help! I can't get my volume to work on video or listening to a video but it works every where else?

    Did you set it up correclty? Have a look - this is for iMessage.
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    for FaceTime
    http://www.trickyways.com/2011/04/set-up-facetime-on-the-ipad-2/

  • How can you get a java program working on a cell phone?

    I was thinking of making some stuff for cell phones so i was wondering how you get a normal java program to work on cells.

    its all j2me - midlet package....Huh? The jsr-118 MID profile alone has 11 packages, one of which is javax.microedition.midlet. Notj2me - midlet.
    works best on nokia phones.Sez who? You seem to be confusing Java ME with Symbian C.
    you can use net beans midlet packge add-on.Only it's called the NetBeans Mobiliity Pack.
    Its easy to use and has lots of tutorials.Ditto for the Wireless toolkit for CLDC.
    just search on google.Yes, but with which keywords?
    @OP:
    NetBeans mobility pack comes with a short tutorial and several samples, you also need to download the latest WTK as the ver. 2.2 which comes bundled with NetBeans is just too buggy to work with. Then there are the manufacturer-specific SDKs from Nokia, Motorola, Sony Ericsson and (maybe) others.
    If and when you get started in Java ME aka j2me, it will be appropriate to post any questions you might have on the mobility forums, not here.
    Google "j2me tutorial" for many good hits.
    luck, db

  • How do you get Oracle 8i to work with j2sdkee 1.3 B

    I had the j2sdkee1.2.1 working with Oracle 8i and I had the following line in the ~conifg/default.properties files
    Here's what worked:
    jdbcDatasources=jdbc/EstoreDB|jdbc:oracle:thin:@localhost:1521:ORCL|jdbc/InventoryDB|jdbc:oracle:thin:@localhost:1521:ORCL|jdbc/jcampDB|jdbc:oracle:thin:@localhost:1521:ORCL
    In the j2sdkee1.3 beta 2, the resource configuration file format seem to have changed and I am not sure how to get oracle to work. I have tried modifying the new format but it does not seem to work. Can anyone tell me where set drivers for Oracle 8i or any place I can look to figure how to.
    jdbcDataSource.5.name=jdbc/Oracle
    jdbcDataSource.5.url=jdbc:oracle:thin:rmi:??;create=true
    jdbcDriver.0.name=COM.cloudscape.core.RmiJdbcDriver
    jdbcXADataSource.0.name=jdbc/XACloudscape
    jdbcXADataSource.0.classname=COM.cloudscape.core.RemoteXaDataSource
    jdbcXADataSource.0.dbpassword=
    jdbcXADataSource.0.dbuser=
    jdbcXADataSource.0.prop.createDatabase=create
    jdbcXADataSource.0.prop.databaseName=CloudscapeDB
    ==============
    Any pointers on how to get Oracle 8i to work with j2sdkee1.3 b2 will be appreciated. thanks.
    --pvt

    You are right. It seems the format has changed.
    However, now there is and admin tool that comes with J2EE SDK 1.3 Now you don't have to touch the config file by hand.
    You can use this tool to get the configuration done.
    To add JDBC driver the command is...
    j2eeadmin -addJdbcDriver oracle.jdbc.driver.OracleDriver
    and to add a data source the command is...
    j2eeadmin -addJdbcDatasource jdbc/Oracle jdbc:oracle:thin@rtc:1521:acct
    Read details about this and other configuration you can do using this toll in the file %J2EE_HOME%/doc/release/ConfigGuide.html

  • How do you get face time to work with shared email adress

    I have 2 computers sharing the same email address. I recieved for xmas a new i touch with face time. I can connect with the thrid computer not using the same email address as mine. How do I get the other 2 to accept the incoming calls?

    You have to add a unique calling email addres to Settings>Facetime and delete the common email address.  Yu need to do the same thing for Messages.

  • HT4623 How do you get your phone to work again after the iTunes update?

    I did an update on my iPhone from iTunes and now the I only have one screen on my phone that has a picture of the iTunes app and the USB cord.  I have plugged and unplugged my phone.  I have tried to turn it off.  I have turned off my computer, but I only get the same screen.  What can I do to get my phone to work properly again?

    That app should have a video on how to do that.  IF not look at their support site.

Maybe you are looking for