How do you move automatically to the next field of a form after scanning a barcode?

Hi, I have been playing around with a barcode scanner (by the way I dont have a clue) and I've converted a form into a PDF document. I'm trying to move to the next field after the data has been populated in a previous field automatically. I'm not sure if this is done within Adobe Acrobat it self or on the scanner.
The scanner has several different modes, TERMINATION CHAR - CR, TERMINATION - LF, TERMINATION CR+LF and DISABLED.
I believe one of them put a ENT after the data from a barcode and one of the others doesnt. Any ideas?

Are you using a handheld scanner and scanning the barcode on screen and wanting the focus to be in the next field after scanning the barcode?
Otherwise, I am not sure what you are asking. The scanner itself won't do this for you if you actively filling out a form. The field which receives the scanned data could have an exit event which has a setFocus method taking you to the field it specifies. (haven't tested this in a long time, so my presumption is once the data is received it will exit, but focus could remain. In that case, another event would be needed. However, A manual <TAB> will force an exit of the field, and the setFocus() function will excute taking you to the field specified in the method.

Similar Messages

  • How do you move and divide the Library in Aperture 3.5?

    How do you move Aperture 3.5 library back to it's original location. I have a folder on my desktop in which I keep photos that i am going to convert to HDR. When I opened it today to trash some of the unwanted photos, I discovered my Aperture library there! this is a large library of over 300 G. How do I move it back to it's proper place? Should I split it? I am using referenced files. Thanks for any suggestions.

    Where do you usually keep your Aperture Library? In its default location in your Pictures folder? You can drag the Aperture Library.aplibrary from the folder on the Desktop to the folder where you want to keep it. As long as the destination folder is also on your system drive, the size of the library should not matter.
    Are your referenced original images also in the wrong folder? The originals should not be moved manually. Use Aperture's built-in command "Fle > Relocate Originals" to move the original image files for selected images to a different folder.
    Regards
    Léonie

  • How do you move music from the new iTunes to your iPod?

    I've downloaded the latest version of iTunes, but can't figure out how to move music and playlists from the iTunes library onto my iPod.  In earlier versions, you only had to drag a playlist onto the iPod.  That doesn't seem to be an option now.

    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.
    To sync to your iPod go to iTunes>Help>iTunes Help>Syncing your iPod....>Sync You Device and follow the instructions.

  • How do you move ebooks from the cloud to the device using Kindle app on an iPad?

    I have purchased ebooks from Amazon and they are showing on my iPad under the Cloud on the Kindle app.  I have tried syncing but I cannot get the new books to move to the device.

    If they are showing in the Cloud tab in the Kindle then you should be able to download them either by tapping on the book, or if you press and hold the book you should get a popup with a couple of options on it, one being 'Download' - they should then show in the Devices tab for reading. Is that what you've tried and it's not working ?
    Or if you login into your account on Amazon's website then you should be able to send them to the Kindle app : http://www.amazon.com/gp/help/customer/display.html?nodeId=201244880.

  • How do you sort numbers in the same field in excel 2010 the same for access 2010

    Hi,
    Is there a way to sort data horizontally in the same field in excel and for access, or is there an addin that can do this
    or  function code
    field data    6-4-25-23-11-45
    sort order 4-6-11-23-25-45
    Regards,
    Rudolf
    rudolfelizabeth

    sort data horizontally in the same field in excel
    Does "in the same field" means that the string "6-4-25-23-11-45" is located in one cell?
    In that case you have to use an UDF. Paste this code into a regular module:
    Function SortNumbersPrim(ByVal What As String, Optional ByVal Delimiter) As Variant
      Dim Arr, Temp
      Dim i As Long, j As Long
      Arr = Split(What, Delimiter)
      For i = LBound(Arr) + 1 To UBound(Arr)
        Temp = Val(Arr(i))
        For j = i - 1 To LBound(Arr) Step -1
          If Val(Arr(j)) <= Temp Then Exit For
          Arr(j + 1) = Arr(j)
        Next
        Arr(j + 1) = Temp
      Next
      SortNumbersPrim = Join(Arr, Delimiter)
    End Function
    Then use a formula like this:
    =SortNumbersPrim(A1,"-")
    Andreas.

  • How do you move songs from the 'iTunes library to 'Jenni's iPod Selection'?

    I have 2 folders with songs in them: iTunes Library and Jenni's iPod Selection. Whenever I download music, they are automatically saved in the 'iTunes Library' folder. But when I hook up my iPod to download them into the iPod, the songs are downloaded from the 'Jenni's iPod Selection' folder. Most of the songs are in the iTunes Library folder... Can someone help me?

    Song that are imported from CD or downloaded into iTunes are always going to be in iTunes music folder. Can't change this.
    Any reason you don't want this and you have music stored in "Jenni's iPod Selection"?
    Why not add it all to the iTunes music folder and create a playlist called "Jenni's iPod Selection".

  • How can you move screens within the workspace?

    Dragging screens around to get them out of the way only to have them go back when you release the mouse.  Not working for me, help???

    Are all the palettes locked?  There was another post along those lines earlier today.  What OS and version are you on?

  • Just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

  • In trying to edit a track - I want to "Delete and Move" the track to automatically fill the area that I deleted - However, after selecting a section to delete - the "Delete and Move" option is grayed out. How do I fix this?

    In trying to edit a track - I want to "Delete and Move" the track to automatically fill the area that I deleted - However, after selecting a section to delete - the "Delete and Move" option is grayed out. How do I fix this?

    Thank you for your attempt to help me. I appreciate that.
    I think I figured out how to fix it-
    I found that if I only delete a small amount at the beginning and at the end of the section that I want to remove - and then highlight that section - Then (and only then) does the "Delete and Move" function work to remove the unwanted section and automatically close the gap between the surrounding sections. I was trying to select a whole section and could only delete it - and then manually move it.
    Problem solved.

  • How do I get numbers to automatically add the next date down a column in numbers?

    How do I get numbers to automatically add the next date down a column in numbers?

    Hi Dd,
    If you want the next date automaitcally  filled in when you add a row to the bottom of the table, you can use a formula.
    Here's an example, done in Numbers 2.3 (Numbers '09). The method is basically the same in Numbers 3.
    Formulas in row 3:
    B3: =B2+1
    C3: =C2+7
    D3: =D2+14
    These have been filled down to the last row of the table.
    The same table is shown below after three rows have been added by dragging the Row control handle (below the tab for row 7) down. No changes other than adding thse three rows were made by the user.
    Note that rows 1 and 2 are header rows, and that row 2 contains the starting date for the seraies of date in each column. In the formula, the number at the end tells Numbers how many days to add to the previous date to get the next date.
    Autofill of the formula requires that every non-header cell located above the cell into which the formula is to be filled contains the same formula.
    Regards,
    Barry

  • I have acrobat professional and photoshop elements. New Mac arrives next week how do I move these from the old machine  as I cannot find the product codes

    I have acrobat professional and photoshop elements. New Mac arrives next week how do I move these from the old machine  as I cannot find the product codes

    You cannot move or copy software between computers. You must reinstall. You will need the serial number. Check your account details on Adobe's site if you registered.

  • How do you move itunes and iphoto to an extrernal drive, and have them still recognized on the computer

    How do you move itunes and iphoto to an extrernal drive, and have them still recognized on the computer.

    Step 1 - copy the relevant folders to your external drive.
    For iTunes, that would be yourusername/Music/iTunes (and everything underneath it, exactly as is).
    For iPhoto that would be yourusername/Pictures/iPhoto Library
    Step 2 - next time you start iTunes (and iPhoto) hold down the Option key while you click the application icon.  You will get a question box that will allow you to point iTunes (and iPhoto) to the new location on your external drive.
    Step 3 - after verifying that everything is working correctly with the libraries on your external drive, delete them from your internal drive.  Be sure to empty the trash.
    As always, it is best practice to always have a backup copy of your data ... just in case something goes wrong.

  • How to move floats to the next page?

    Hi All,
    Can anyone help me on this?
    How to move floats to the next page the same position?
    Thanks in advance

    @Learner – you can duplicate the object to the next page and remove the original.
    If the original one is anchored you also have to account for its position, because duplicating an anchored object will move it.
    Here an example for duplicating a selected object to the same page.
    //DuplicateAnchoredObject_SELECTION_SNIPPET.jsx
    //Uwe Laubender
    * @@@BUILDINFO@@@ DuplicateAnchoredObject_SELECTION_SNIPPET.jsx !Version! Fri Apr 12 2013 07:53:31 GMT+0200
    var sel = app.selection[0];
    var x = sel.geometricBounds[1];
    var y = sel.geometricBounds[0];
    //The duplicate() method without an optional argument:
    var dup = sel.duplicate();
    //NOW: the duplicated objects is at the inner border of the page
    //To move it to its original position we need the following:
    var xd = dup.geometricBounds[1];
    var yd = dup.geometricBounds[0];
    dup.move(undefined,[x-xd,y-yd]);
    That snippet can be enhanced for duplicating to a certain page, because the duplicate() methods can take arguments like "Page", "Layer", "Spread" etc. For details see the DOM documentation at:
    http://www.jongware.com/idjshelp.html
    One caution here: to make that work the way you want with facing pages, you have to take into account, that your coordinate system must be changed to "per page" by the property "RulerOrigin" of the ViewPreferences.
    This said, here is a working example for duplicating a selected object to page 3 of the current document:
    //DuplicateAnchoredObject_TO-DIFFERENT-PAGE_SELECTION_SNIPPET.jsx
    //Uwe Laubender
    * @@@BUILDINFO@@@ DuplicateAnchoredObject_TO-DIFFERENT-PAGE_SELECTION_SNIPPET.jsx !Version! Tue May 14 2013 10:11:29 GMT+0200
    var d=app.documents[0];
    var oldRulerOrigin = d.viewPreferences.rulerOrigin;
    var sel = app.selection[0];
    var x = sel.geometricBounds[1];
    var y = sel.geometricBounds[0];
    //In case of facing pages we change the ruler origin:
    d.viewPreferences.rulerOrigin = RulerOrigin.PAGE_ORIGIN;
    //Duplication of selected object:
    var dup = sel.duplicate(d.pages[2]);
    //NOW: the duplicated objects is at the inner border of the page
    //To move it to its original position we need the following:
    var xd = dup.geometricBounds[1];
    var yd = dup.geometricBounds[0];
    dup.move(undefined,[x-xd,y-yd]);
    //Restore the original ruler origin:
    d.viewPreferences.rulerOrigin = oldRulerOrigin;
    Of course, thiese snippets are working also with not anchored objects…
    Uwe

  • How do I set AUTOMATOR to go to a folder, get a picture, attach it to an email, send it, move on to the next picture, send it and repeat it till no more pictures are available?

    I have about 5000 (yes, five thousand!) JPG files I need to post to a blog via email.
    So, how would I go about setting AUTOMATOR to create an email, attach only one of the JPG files to this email, send it off and move on to the next; repeating this  till all pictures have been emailed off?
    Any help would be appreciated!
    Thanks,
    MP

    Here's a barebones workflow, tested under Snow Leopard.
    You'll need to get red menace's Dispense Items Incrementally action: http://automator.us/leopard/downloads/. (I hope it still works under Yosemite!)

  • I was downloading a movie on my iPad and I stopped downloading it and I want to delete it and it won't. How do you delete it in the iTunes for iPad

    I was downloading a movie on my iPad and I stopped downloading it and I want to delete it and it won't. How do you delete it in the iTunes for iPad.

    If you tap and hold down the icon - and the X does not appear on the icon - you will not be able to delete it without totally downloading it. Finish the download and then delete it.

Maybe you are looking for