How function @DESCENDANTS is working?

Hi ,
I am doing calculation scripts exercise.I am going through the @DESCENDANTS function. The @DESCENDANTS function returns all the descendants of specified member.
Here is my hierarchy:
Account
_ac1
__ac11
_____ ac12
________ac13
________ac15
on Location pune their is no any data on member ac13,ac15.
But for the same member the data is present in Mumbai Location.
I am going to copy the data from mumbai to pune location for member ac13,ac15.
The bellow is my calculation script.It is executed successfully but data is not copy for these 2 member.
Please let me know where I am going wrong so because of that data is not copying.
FIX ("FY13","Jan","Actual","base","Local",@DESCENDANTS(ac12))
"Pune"="Mumbai";
ENDFIX
instead of @DESCENDANTS(ac12) i have put @DESCENDANTS(ac12,4) or (ac12,5) the data does not copy for these 2 members.
Please help me out from this.
Thanks
Edited by: 949936 on Mar 21, 2013 11:26 PM
Edited by: 949936 on Mar 21, 2013 11:27 PM
Edited by: 949936 on Mar 21, 2013 11:28 PM

If you are just using Pune=Mumbai, then why not use DATACOPY.
This will make sure that blocks are created (unless you have a setting for not copying missing blocks)
I don't think @desc is the problem. Read about that in techref.

Similar Messages

How Function module MD_SET_ACTION_PLAF works?

Hi all
I created z4 action control with ( /Sche/ZZZ1/ZZZ3) Actions and put it in MRP view in material master.When I run function module MD_SET_ACTION_PLAF for mass change of given planned order and put actions in above mentioned order( in TMDACCTO table entries (Sche/ZZZ1/ZZZ3) it gives Error (Z4 / / ZZZ1 is an invalid combination or action code not allowed).
If I enter Actions one by one in TMDACCTO it would be OK but I don't know how I should enter Actions (Mass) in TMDACCTO Entries.
Thanks
Babak Bolourchi

Hi,
is it possible to rework this link, because it doesn't work and perhaps it could help me also.
Perhaps I have a similar problem with the same function "MD_SET_ACTION_PLAF". We use this function in an internal developed report. Now after switching the hosting partner we get for this function the error: "01 / APCH / BOME is an invalid combination or action code not allowed".
But when I run this report just with this one material, where we get the mistake it is working very well.
Perhaps you could help me/us with this issue.
Thanks a lot.
kind regards,
Oliver

How to open and close files from UIwindow my function doesn't work

Hello guys!
I am trying to create a simple ui-interface.
I made one button so far.
but my function does not work.
if I run the function without dialog box it works perfectly!
when I running the function in the dialog window, picking a file and open, nothing happens why?
please help me with a correct code.
also how do I write 2 functions that also closing a file and saving a file?
here is my simple code.
var w = new Window ("dialog");
button.onClick = function () {
OpenMyFile();
w.show ();
function OpenMyFile(){
var myFile = File.openDialog();
app.open(myFile)
Thank you in advance.

Well, to answer your first question, you've added an event listener, but you haven't actually added the button itself.
try this:
var w = new Window ("dialog");
b = w.add("button", undefined, "Click me!");
b.onClick = function () {
OpenMyFile();
w.show ();
function OpenMyFile(){
var myFile = File.openDialog();
app.open(myFile)

How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

Sorry I had to reply through your profile Gail from Maine, my PC has java issues. In any event, when I delete them directly from my device everything is perfect and cool. However, in the rare instance I want to add new music that I actually buy in stores (I know, quite the unique and old-fashioned idea...but hey Im an audiophile) once I upload the tunes, everytime I sync my library it re-adds everything that I spent hours deleting. In a perfect world, I thought I could maintain a massive iTunes Library, and add or delete (remove) songs from my iPhone to save both memory or keep my iPhone selections more current/apt to my musical "tastes" at that time. I know about the whole playlist thing, but thought there might be an easier way. ie - checking/un-checking the little box next to the song name, and then doing a sync. Again, everytime I do this however, whether everything is checked or un-checked it adds the entire library! So frustrating. Any suggestions. Thank you graiously in advance for your help.

The autorotation function has stopped working in my text message app. only. It is working for all other applications. What has happened? How can I fix it. The autorotate is on.

The autorotation function has stopped working in my text message appnly. It is working in all other apps. The autorotation is turned on! What has happened? How do I correct this?

1. Try quitting the Messaging app
Double tap the Home button, hold the app icon until it wiggles, tap the red dot, tap the Home button twice
Relaunch
2. Reset: Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears

How can I sum up raws? the sum function seems to work for columns only and right now I have to create a separate formula for each raw

How can I sum up raws? the Sum function seems to work only on columns. Right now I have to create a separate formula for each raw

Hi dah,
"Thanks, but can I do one formula for all present and future raws? as raws are being added, I have to do the sum function again and again"
You do need a separate formula for each group of values to be summed.
If the values are in columns, you need a copy of the formula for each column.
If the values are in rows, you need a copy of the formula for for each row.
If you set up your formulas as SGIII did in his example (shown below), where every non-header row has the same formula, Numbers will automtically add the formula to new rows as you add them.
"Same formula" in this context means exactly the same as all the formulas above, with one exception: the row reference in each formula is incremented (by Numbers) to match the row containing the formula.
Here the formula looks like this in the three rows shown.
B2: =SUM(2)
B3: =SUM(3)
B4: =SUM(4)
That pattern will continue as rows are added to the table.
Also, because the row token (2) references all of the non-header cells in row 2, the formula will automatically include new columns as they are added to the table.
Regards,
Barry

My search function does not work. How can I fix it?

Hello
I need help I just bough a macbook 13 inch, with snow leopard
and the search function does not work.
The window opens but when I write the name i searh it gives me no results.
How can i fix it?
Do i need really to re install all snow leopard?
thanks
pt

Hello paola t & welcome to the forums
I need help I just bough a macbook 13 inch
It may be that Spotlight hasn't completed indexing just yet - is there a dot (indicates busy) inside the magnifying icon top right?
Also, check System Preferences/Spotlight to see what if any exclusions are configured, etc.

How do I stop a tool from functioning on my work after I finish using it?

How do I stop a tool from functioning on my work after I finish using it?

Switch to another tool?
I really don't know what you mean by "stop functioning". The Zoom tool will always work when selected.
Is there a specific example you have in mind? Give us the exact version of Photoshop you are using, and the version of Mac OSX or Windows.
A screenshot outlining your problem is best.
Gene

I purchased an additional audio function for the apps ＂baby monitor＂today, but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

I purchased an additional audio function for the apps ＂baby monitor＂today， but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

Refund
http://www.apple.com/emea/support/itunes/contact.html

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

On my laptop when I open up a pdf file and do a search for a particular
text phrase it prompts me to run a character analysis. Whereas on my mac
mini, when I try to engage the same process it just says it couldn't find
the phrase and doesn't even try and run a character analysis. I tried
clicking on the tool bar and the recognize text tab but nothing there seems
to do anything.
In trying to figure out the issue on my own I noticed one thing. I run a
small law firm in St. Louis and I scan in all my files to which are
subsequently emailed to my outlook account where I will save them as pdf's
to their respective folders. On my laptop when I open up an email from my
scanner I see the image of a acrobat document next to the attachment
paperclip symbol. However, when I open up the same email on my mac mini I
notice instead of an acrobat file image it shows a Preview file image (the
program used to open up pdf's before I installed acrobat).
Hope this helps!
Sincerely,
Jonathan McAllister

HT1212 My iPhones screen is broken(a black screen and the touch function does not work). I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

My iPhones screen is broken(a black screen and the touch function does not work).I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

i don't see a way for you to back up your phone, because it will require you to unlock the phone.

X1 Carbon 2014 Function keys not working in windows7

Hello.
I have a brand new X1 carbon(model: 20A7-005KMD) that was installed with our company image, running windows 7.
Alle drivers in device manager has been installed, and system update is updated.
The carbon has the "touch" function keys and they only partly work.
When booting the computer i can swap between the different functions, but when i get into windows, its is "stuck" with only the options F1-F12. The F keys work, but i cant change settings by pressing the FN key on the left side og the touch display, and get sounds/brightness settings etc.
as said, this works just fine during the boot.
Any ideas what can be causing this and even more important - a fix?

Hi Guys,
We are currently having the same issue on the X1 Carbon 20A7 models (20A7000LAU). In BIOS or during boot the function changing works without issue (limited to two (2) function screens how-ever), it stops working once you log in. If you then lock the computer you can change the functions, but then once you unlock the device, it stops working.
When the drivers are installed and the device is restart we get the above behaviour, if we uninstall the drivers the function keys will function as expected till the device is restarted. This is very strange behaviour.
On a device received by Lenovo there are 4 function changes/screens in total, we can only make two work temporarily as listed above. We have tried the following.
1. MDT 2013 Delivered Windows 8.1 x64 image image. All drivers/software components installed from the lenovo website. We receive above issue and cannot resolve by uninstall/reinstalling.
2. Vanilla Windows 8.1 ENT x64 image installed from Microsoft Volume Licensing portal, installed all drivers supplied from the Lenovo Website. The same behaviour is seen as above and is reproducable.
3. We have als compared all drivers/software installed on the factory supplied model to a manually built device, still the above behaviour is witnessed.
4. We have manually exported drivers from the X1 Carbon device from lenovo and injected them into the vanilla Windows 8.1 ENT or PRO newly imaged device, still the same behaviour above.
Please let me know what I'm missing, I'm certain this is a bug in the drivers for this model.
Regards,
Nic

The to_date function doesn't work ?

Hello
I don't know why my to_date function doesn't work on my pc.
my statement is pretty complex so i just tried simple one
select to_date('10-Jan-2006','dd-mon-yyyy') from dual;
but even this one doesn't work it says it is invalid month
howcome?
is it because my Windows XP (not english version) doesn't recognise month Jan?
i tried it another place it worked
so is there any language pack / patch i need to install? ?
so does OS matters?
or how to fix this..please help me

By default SQL Developer picks up it's language settings up from (on Windows) the Regional and Language Options. You can see what it has set by querying the NLS_SESSION_PARAMETERS view.
Assuming you don't want to change to using DD-MM-YYYY formats for your months or change your regional settings on your PC, you need to tell SQL Developer which language you want, which you can do by adding the following lines to the file sqldeveloper\jdev\bin\sqldeveloper.conf:
AddVMOption -Duser.language=en
AddVMOption -Duser.country=US

Two Exact Functions Are Not Working (long)

I am making a portfolio website. The way I have structured my code is that I have an action layer that takes care of global actions such as how the user would navigate through the website. For each page of the website, I would have a seperate layer that would load the content of that page onto the screen. The content would be added as a movie clip which is attached to a scroll pane component.
I am having trouble calling one of my functions. What I am trying to do is that when the user navigates to 'My Work' section of my website, they can select from one of the examples of my works. Doing so will pop-up a movie clip which will display photographs and provide an explanation for my work. The problem I am trying to fix is that when the user tries to navigate to another page on my portfolio, the pop-up will not remove itself. I have created a function which is attached to the close button so if the user presses it, they can manually close the pop-up movie clip. I have also tried using this closing function with the main navigation buttons of my website so that when the user tries to go to another secion of the website with the pop-up open, the pop-up will automatically close itself, however, it is not constantly working. My 'works' page is seperated into several catagories (web, graphics...). This auto close function is only working on one of the five catagories and I do not understand why. I have copied everything exactly for one catagory to the second catagory, but Flash keeps on giving me the error that "Error #1009: Cannot access a property or method of a null object reference".
My flash files can be downloaded here. Once downloaded, you would want to open up website14.fla. I know my coding is not exactly organized, and I am sorry as this is my first time I have really used a lot of ActionScript at once. I'll try my best to walk you guys through my coding to my error.
To navigate through my website, you would click on the sink, toilet, or shower handles X amount of times. 1 time would bring you to 'about me', 2 for 'resume', 3 for 'contact', and 4 for 'work'. Once on the work page (press 4 times), click on the 'web' catagory and select one of the thumbnails. A pop-up window will appear. Don't close the pop-up window, and instead navigate to another page by pressing one of the handes a few times. Notice that the pop-up window automatically closes itself. Now navigate back to the 'work' page, click on the 'graphics' catagory and select a thumbnail. Now navigate to another page by pressing the handles a few times. Notice how Flash produces the error 'Error #1009: Cannot access a property or method of a null object reference'. In addition, notice how the pop-up window doesn't dissapear, and the new page is layed overtop.
To navigate in the Flash file to my error, I'll try to guide you there. In the root timeline, scroll over to Frame 1 Layer 'Action' and look at the actions panel. On line 72, I have two If statements checking for frames 30 and 31. These two frames are where my work is displayed. I have also used a try/catch statement to check for errors. Now going to frames 30 and 31 and clicking on the workContent layer and looking into the actions panel, I am bringing my movie clip onto the stage by using the function createScrollPane. The function createScrollPane is located in frame 1 in the Action layer on line 13. This function just takes the movie clip and wraps the scroll pane component around it. Going to frame 31 on the main timeline, select the workContent layer and pull up the actions panel to see the code. you will see that I am loading workGraphics_content movie clip onto the page. Find it in the library (content/content/workGraphics_content) and open it by double clicking on it. There you will see another movie clip (workGraphics_content2) fading from alpha0 to alpha1. Double click on it and look at the action script in frame one layer 'action'. On line 93, I have the function external_workFrame_exit which is called whenever the user navigates from the 'work' page to another page on the website. For some reason, Flash keeps on giving me an error whenever that function is called. Oddly enough if you scroll up to line 78 you will see the function workFrame_exit which is none the less exactly the same as external_workFrame_exit. workFrame_exit is called when the user manually clicks the closing X button on the pop-up window to close it. If you want, you can open up another movie clip (content/content/workWeb_content) and double click on that movie clip to open up workWeb_content2 and take a look at its action. Looking on line 86, I have the external_workFrame_exit function and this one is the exact same one as the external_workFrame_exit function (which works fine) found in workGraphics_content2.
What I am confused about is how I have two exact functions being called in pretty much exact same situations in the exact same way, and one of them fails to work. Is there a solution to my problem? Feel free to ask any questions if any of my explanations were difficult to follow.
Again, the flash files can be downloaded here. Once downloaded, you would want to open up website14.fla.

Sorry about the long post. I just thought that I would include all the details. To sum things up:
You navigate through my website by clicking the sink, toilet, and shower handle X amount of times. By clicking it 4 times you will end up on my 'work' page. My 'work' page has several categories. Select the 'graphics' category, click on one of the thumb nails and a pop-up will appear. Now navigate to another page without closing the pop-up by clicking on the handles. Notice how the pop-up doesn't go away, and the new content is displayed over top? Now if you go back to my 'works' page and click on one of the thumb nails under the 'web' category, then navigate to another page, notice how this pop-up goes away.
I am using the exact same functions to make both the 'graphics' category and the 'web' category to go away, but for some reason the 'graphics' one is not working.
Again, you can download my files from here.

Scan function no longer working on my Printer

Recently moved locations and had to re set up my PC. Since then the scan function no longer works. I get the error message "Scanner reported an error", "Failed to open a session on the device". I have uninstalled and reinstalled the HP drivers, i have checked the internet connections and all are working. Actually have had a lot of troubles earlier with the rinter and the scanner re wireless connections but hoped to have finally overcome these.
Not part of the problem but a real gripe as to what is the purpose of wireless devices when they never work as well as the ethernet connected devices, someone really needs to get this sorted <gripe over>.
Can anyone help me please to get my system back up and running. I surgent now as currently on paternity leave and need to get some administrative issues doen from home in the next couple of days.
Many thanks,
This question was solved.
View Solution.

StevieDoug,
Thank you for trying my recommendations, I believe this is a wireless issue. Let's go ahead and start troubleshooting the network:
I would like you to shut down the Router, Printer and Mac in that order. Wait atleast 60 seconds, then power on the items in the way they were shut down. Re-attempt the scan. Was this successful or are you still getting the error message?
If you are still getting the error message, let's try Pinging the Mac and testing the connection, click on the link below:
How to Ping on Mac OS
If pings are successful the issue is not likely communication, instead it is probably a firewall blocking the scanning communication. Continue below:
To turn on firewall protection:
1. Choose Apple menu > System Preferences, click Security, and then click Firewall.
2.   Open the Firewall pane of Security preferences   
3. Click the lock icon to unlock it, and then type an administrator name and password.  
4. Click Start to turn on Firewall.
To allow only specified applications and services to connect:
1. Click Advanced.  
2. Click the Add (+) button, and then select the application or service in the dialog that appears.
Are you able to complete the scan? Please let me know the results!
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How function @DESCENDANTS is working?

Similar Messages

Maybe you are looking for