How i could access my client sys CF server?

hi
i have CF in my system. and also i am successfully accesing
CF administrator also.
now howcan i connect to the my Client CF server using the my
CF administrator.
is there any way to acess it.?
i mean i want to connect to the my client CF server through
my cf adminstrator.
is it possible?

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • How to keep track of client in rmi server

    how can I keep track of a disconnected client in a rmi server ?
    And what logic do I use to disconnect a client fro mthe server ?

    When a RMI client receives a stub to the remote object, RMI client runtime sends a dirty() call to the RMI server runtime which in turn helps the RMI server runtime in updating the client references to the remote object. Client reference is nothing but a unique identification generated by client RMI runtime for that instance of JVM. RMI uses a reference counting algorithm for destroying unreferenced remote objects. Once all references (all clients who are holding the stub to this remote object) to a remote object drops to zero, local garbage collector takes care of freeing this remote object.
    RMI client runtime initiates a TCP connection with the remote object only when a method is invoked on the stub. RMI transport layer uses a simple connection pooling mechanism to use already established TCP connections with server objects in further remote method invocations. Let's say the client is invoking a remote method on the remote object's stub fetched from the registry service. Now RMI transport layer initiates a TCP connection with the remote object (exported at ("host1", 4567)). After completion of the remote method, RMI client's transport layer keeps the connection open for some time (some configurable value) to take the advantage of the already established TCP connection in future remote method invocations on remote objects exported on the same host and port ("Host1", 4567"). RMI transport layer also takes care of closing these connections if the connections are idle more than configured value of connection open time.
    From the RMI server's perspective, once the RMI server runtime receives a remote method invocation request from the RMI client, it creates a new thread and try to dispatch the method on the designated remote object. After returning the results of the remote method to the client, RMI client's transport layer may not end this conservation with this remote object to take the advantage of this TCP connection in future remote method invocations. So the same thread may be used for dispatching another remote method in future. This is actually the side effect of re-using the established TCP connections on the client side.
    RMI server maintains client's reference in the client's reference set of the remote object as long as the client holds a normal reference to remote object's stub in its JVM. Once the client relinquishes the reference to the stub (goes out of the scope or setting it to the null), RMI client automatically sends clean() call to the RMI server runtime to update client reference set of the remote object. There is no public API to lookup or manipulate the client references for a given remote object, but you can always unexport the remote object even some clients are holding stubs to the remote object. Next time when the client invokes the remote method using this stub, client will receive a "connection refused exception" from the server because the remote object is already unexported. Let's say if the RMI server is started again (remote object is exported and registered with registry service), the client once again obtains the stub to the remote object from the registry service instead of using earlier stale stub. (This time remote object may have been exported on different port, so the port details in the old stub may not be valid any more).
    At any point of time there can be more than one established TCP connection with the RMI client. This may be the temporary condition; RMI client's transport layer automatically closes these connections if it does not receive any remote method invocation requests with in a pre-determined interval of time (default: 2 min). You can always find out RMI client's host in a given remote invocation by using getClientHost(), but how can you semantically define a "disconnected client in a rmi server" in your application context ? You can always force all the clients to fetch the stub again in future remote method invocations by unexporting the remote object in RMI server. I hope this information helps ...
    -- Srinath Mandalapu

  • How do I access the Client Tools?

    I've installed the Oracle9i client. How do I start the applications.
    Thanks.

    HI
    Use "netca" for Network Configuration
    "oemapp worksheet" for client
    If u dont find command
    got to <Oracle_Home>/bin and execute
    Dhanaji

  • How to load images from client to oracle server

    Hi
    I want to load the image in oracle. when i tried to laod the iamge from my client(windows) to oracle server(linux)
    it is giving error. i wrotea pl/sql program to store the images in oracle database.
    but the server not reconzing the path of image wich is client. how to overcome this probelm. as iam new to oracle
    i dont know apex and DAD. can any help me with an example
    thak you

    In addition to Solomon, please read:
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:6894565006210, that explains (again) why servers can't see clients and points to an sqlldr example @ http://asktom.oracle.com/pls/asktom/f?p=100:11:2928066747837319::::P11_QUESTION_ID:624423639385

  • How to copy image from client machine to server machine?

    Hi ,
    Im doing a project in web applications...im using tomcat 5.0....when clients (using different machine) upload a image i need to make a copy of that in my "webapps" folder...can u help to solve it?
    The following code is working only in my machine..but not working when i upload from remote machines....
    can u sort out?
    try
                   FileInputStream input = new FileInputStream(fileSource);
                   byte b[] = new byte[input.available()];
                   input.read(b);
                   input.close();
                   fileDest.mkdirs();
                   FileOutputStream output = new FileOutputStream(new File(fileDest, fileSource.getName()));
                   output.write(b);
                   output.flush();
                   output.close();
              catch(IOException e)
                   System.out.println(e);
              }

    Hi,
    I having same problem. did you find solution for your issue.
    Can you please give your source if you dont mind?
    Thanks

  • How to upload file from client machine to  server machine?

    i am developing one web application.I have one html file with browse option. client can browse any type of file. what ever file the client will browse it going to be stored in server machine. for storing the file want to use servlet. my html form is of multipart type.
    can any one send me the servlet code? i am using tomcat 5.5 as web server.

    [http://commons.apache.org/fileupload]
    Start reading 'User Guide' and 'Frequently Asked Questions'.
    Good luck :)

  • How can I access an EJB in JBoss Server?

    I'm using JBoss 3.0.3 and I have two Jboss servers. I trying access an EJB Entity in B by an Session in machine A. What should I do for it?

    just define the different server path in the description xml file
    <jndi-name>jnp://serverA(B)/....</jndi-name>

  • How to dynamically connect Extend client to proxy server?

    Hi,
    Is it possible to do programmatically? My client should decide at run time to which node it will connect.
    Thanks, Denis.

    Hi Denis,
    Yes you can do this, you need to write an implementation of com.tangosol.net.AddressProvider which provides your client with the InetSocketAddress it should connect to. Your implementation of AddressProvider can then work out the end-point however it likes. You configure your remote-cache-scheme or remote-invocation-scheme to use the Addressprovider instead of putting in socket-address entries.
    E.G. instead of this...
    <tcp-initiator>
      <remote-addresses>
        <socket-address>
          <address>192.456.789</address>
          <port>10000</port>
        </socket-address>
      </remote-addresses>
    </tcp-initiator>you do this...
    <tcp-initiator>
      <remote-addresses>
        <address-provider>
          <class-name>com.jk.MyAddressProvider<class-name>
        <address-provider>
      </remote-addresses>
    </tcp-initiator>If you need to parameterise your AddressProvider you can add init-param entries to the config in the usual way.
    JK

  • How can I connect many client in  one server ?

    Hello, My name is Fabio, i live in Brazil.
    I need that two or more conect the ane server socket.
    Who can help me ?

    Hello, My name is Fabio, i live in Brazil.
    I need that two or more conect the ane server
    socket.
    Who can help me ?Do you mean the common idiom?
    // server code
    while (true){
      Socket s = serverSocket.accept();
      new Thread(new ClientHandler(s)).start();
    class ClientHandler implements Runnable{
      Socket soc;
      public ClientHandler(Socket so){
        soc = so;
      public void run(){
        // do io using soc's io streams
    }

  • Access, execute mof from pull server using release management

    I have created a DSC pull server and deployed a mof to this server.
    I could access the mof from pull server using below script and it executed successfully from powershell ISE.
        1. 
    Configuration
    C_Pull_Webserver
        2. 
        3. 
    LocalConfigurationManager
        4. 
        5. 
    AllowModuleOverwrite=$true;
        6. 
    ConfigurationID
    = "db00cf80-cb0e-4537-8344-90e3906e0b34";       
        7. 
    RefreshMode
    = "Pull";
        8. 
    DownloadManagerName
    = "WebDownloadManager";  
        9. 
    RefreshFrequencyMins
    = 15;
        10.
    ConfigurationModeFrequencyMins
    = 30;
        11.
    ConfigurationMode
    = "ApplyAndAutoCorrect";
        12.
    DownloadManagerCustomData
    = @{
        13.
    ServerUrl
    = "http://myserver:8080/PSDSCPullServer/PSDSCPullServer.svc";
        14.
    AllowUnsecureConnection
    = "TRUE" }          
        15.
        16.
        17.
    #Create MOF to push
        18.
    C_Pull_Webserver
        19.
    #push the MOF: this will engage pull mode
        20.
    $FilePath
    = (Get-Location
    -PSProvider FileSystem).Path
    + "\C_Pull_Webserver"
        21.
    Set-DscLocalConfigurationManager
    -ComputerName "CHN-AERO-VM13"
    -Path $FilePath
    -Verbose
    I removed the below lines from the above script
    19.
    #push the MOF: this will engage pull mode
    20.
    $FilePath
    = (Get-Location
    -PSProvider FileSystem).Path
    + "\C_Pull_Webserver"
    21.
    Set-DscLocalConfigurationManager
    -ComputerName "CHN-AERO-VM13"
    -Path $FilePath
    -Verbose
    andand tried  to access it from release management and i get the below error
    System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.AggregateException: One or more errors occurred. ---> Microsoft.TeamFoundation.Release.Common.Helpers.OperationFailedException:
    Perform operation 'Invoke CimMethod' with following parameters, ''methodName' = SendConfigurationApply,'className' = MSFT_DSCLocalConfigurationManager,'namespaceName' = root/Microsoft/Windows/DesiredStateConfiguration'.
    Failed to apply configuration in the DSC script to the computer. Consult the Logs below for details of the error.
    System.Management.Automation.RemoteException: Unable to find the mof file. Make sure you are generating the MOF in the DSC script in the current directory.
       at System.Management.Automation.PowerShell.CoreInvokeRemoteHelper[TInput,TOutput](PSDataCollection`1 input, PSDataCollection`1 output, PSInvocationSettings settings)
       at System.Management.Automation.PowerShell.CoreInvoke[TInput,TOutput](PSDataCollection`1 input, PSDataCollection`1 output, PSInvocationSettings settings)

    Don't know. How did you generate the MOF?
    When I run this it works just fine:
    Configuration C_Pull_Webserver{
    LocalConfigurationManager{
    AllowModuleOverwrite=$true;
    ConfigurationID = "db00cf80-cb0e-4537-8344-90e3906e0b34";
    RefreshMode = "Pull";
    DownloadManagerName = "WebDownloadManager";
    RefreshFrequencyMins = 15;
    ConfigurationModeFrequencyMins = 30;
    ConfigurationMode = "ApplyAndAutoCorrect";
    DownloadManagerCustomData = @{
    ServerUrl = "http://myserver:8080/PSDSCPullServer/PSDSCPullServer.svc";
    AllowUnsecureConnection = "TRUE"
    C_Pull_Webserver
    ¯\_(ツ)_/¯

  • Kicking out a client from rmi server

    I have a few clients on a rmi server .
    how can I disconnect a client from the server?
    the client is an applet.
    I treid calling a method containning System.exit(0)
    from the server on to the client but it throws a
    java.securtiy .. exception?
    so how can I close down the client applet from the server?
    thanks

    please help
    shall I throw a remote exception on the server

  • How do I access group calendars on 10.8 server from a calendar client?

    Hi,
    I have a brand new installation of 10.8.2 . I installed the server app and started Calendar, Contacts, DNS, File Sharing, Mail, Open Directory and the Wiki services. I created a group with some users in it. I also created a group wiki and enabled the calendar for that wiki. The user group has r/w access to the wiki. The web interface to the wiki works from a client 10.8.2 client system. I can edit the group calendar through the web interface. I created an account in the Calendar application that connects to the server and shows the users' calendar. I altered the server path to /principals/__uids__/wiki-GROUPNAME/.
    The calendar shown is still that for the user and not the one of the group. Hence my question: how do I access group calendars on a 10.8 server from the calendar application on a client?

    yrmomsadic wrote:
    Forgot to mention, you can techinically force it to work, but iCal breaks it for some unknow reason, taking it back to the users account after a day or two.  The best work around has been to create a new user, named the group name, and then allow delegates to access the calendar.  This however screws things up with the iphone calendar, as it didn't/doesn't handle delegates.  Again, hoping Apple comes to their senses on this.
    You can still delegated calendars on iOS, but the setup is a little tricky.  You have to add an entirely new calendar account, and enter the full ugly url with the users uuid.  It would be so nice if iOS just supported CalDav delegation.

  • I brought up my itunes through a friends laptop. I signed out thinking I could get on my home computer and still have my iTunes accessible, how do i access them from this computer? HELP

    I brought up my itunes through a friends laptop. I signed out thinking I could get on my home computer and still have my iTunes accessible, how do i access them from this computer? HELP

    Copy everything from the old computer or your backup copy of your old computer, to your new one.

  • I use a web site called ACRIS- up until yesterday I could access all parts of the site, including calling up images of deeds. Now I can no longer get the images via firefox, but can them via windows explorer. Why? How do I fix this?

    I use a web site called ACRIS- it allows me to access NYC Finance dept records- specifically images of deeds. Up until yesterday I had no problem. Then without any apparent reason I could access all parts of the site, but could not access the deed images. First I thought it was a problem on their end, which sometimes happens, but after waiting 24 hours I was still having the problem. Then I tried windows explorer and it worked without any problem. How do I fix this?

    Hi jeffbeal,
    First question I would ask is what has changed recently? Did you add any new extensions or add-ons?
    I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
    Hopefully this helps!

  • In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

    In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

    Hi JohnDory,
    The information side-bar from iPhoto has been removed in Photos App, and so it's been converted into a pop-up window showing both the exposure, aperture and so technical photo parameters, as well as the comments, faces and LOCATION for that photo.
    This small floating window is shown whenever you click the button in the app title bar, right clicking a specific photo or pressing ⌘i
    If you open the albums view (clicking in the name of the album list, NOT an album name, you can see in your left sidebar - which can be shown or hidden) and press ⌘i without selecting a specific photo the Info pop-up will show the map for your whole library (as well as the total amount of photos, videos, GB used, etc)
    So, I'm afraid the "Locations" view (which I really loved) from iPhoto has been ripped off... and we can only get "some sort of locations view" by this method.
    As for locations... there is no option for manual geotagging (so, setting location to a specific photography which doesn't have it yet)... that really ****** me off 
    Regards,
    braincasualties.

Maybe you are looking for