How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover
How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover.Please help I just deleted all doubles did allmy artwork Etc..
Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store
Similar Messages
-
How do I keep the iPad 2 on while using it so it won't go off, making have to push the buttons to get back to where I was?
Open the Settings app > General > AutoLock - set to Never. You will, howver, want to get in the habit of manually putting it to sleep with the on/off button.
-
Why when my music was matched to the CLOUD did my music become the clean/censored version and how the **** do I get back my original music?
Why when my music was matched to the CLOUD how did my music become the clean/censored version and how the **** do I get back my original music?
-
Firefox 4 wont even start up now. how do i uninstall firefox 4 and install previous version
want to know how to uninstall firefox 4 and install previous version. also where to get download of previous version
Your problem is caused by the Ask Toolbar which you have installed. There are compatibility issues between Ask and Firefox at the moment.
Please do the following to ensure a clean installation.<br><br>
#Use Internet Explorer to download Firefox 4.0.1 from this link: [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and choose "'''Save'''" when you see the prompt. Then save it to your desktop. ''Do not choose "Run"''.<br><br>
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
#Finally run the installation file you downloaded to the desktop earlier.<br>
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.<br>
Next, click the Firefox button and go to Add-ons, then Extensions. Find the Ask Toolbar in there and click "Remove".
If you would still prefer to use the previous secure version, use this download link instead of the one to v4.0.1: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.17] Otherwise the installation procedure and removal of the Ask Toolbar is the same. -
how can i remove unwanted bookmarks from bookmark bar on MAC I'm using firefox 4.0.1 and on previous version Ff 3.6 I had organize bookmark button on this version I don't
http://support.mozilla.com/en-US/kb/Deleting%20Bookmarks?s=delete+bookmark&as=s
follow the above link it explains it all -
I am new to the MAC world but I am very familiar with Lightroom on a PC. This weekend I was weeding out the pics I do not want on my MAC and now I have a ? by all my folders. How do I recover/get back to where I was 2 days ago?
These instructions will help you fix the problem: Adobe Lightroom - Find moved or missing files and folders
-
I haven't had my phone 4 for a while and i need to unlock it asap, but forgot the password, How do i simply get back in? asap HELP
Hi
Check this:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212 -
I have multiple Windows Server 2008 R2 machines in which I am attempting to do an in place upgrade to 2012 R2, and it is repeatedly failing.
Setup gets all the way through, and it says Getting ready, followed immediately by an error saying: Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
I am attempting to install:
Windows Server 2012 R2 Datacenter (Server with GUI)
x64 Date modified 3/18/2014
I have found several posts, many discussing how disk space can be an issue, I have increased disk space so it shouldn't be an issue. I have also made sure the only only partition on disk 0 is C: and system reserved.
I have disabled all unessential services and went through and removed all unessential applications, and extras. Still getting the error.
Here is the update log
2014-11-24 08:20:20:715
888 ed8
AU AU initiates service shutdown
2014-11-24 08:20:20:715
888 ed8
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:20:20:840
888 ed8
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:20:20:840
888 ed8
Service *********
2014-11-24 08:20:20:840
888 ed8
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:20:20:840
888 ed8
Service *************
2014-11-24 08:23:27:265
892 9a0
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0500) ===========
2014-11-24 08:23:27:281
892 9a0
Misc = Process: C:\Windows\system32\svchost.exe
2014-11-24 08:23:27:281
892 9a0
Misc = Module: c:\windows\system32\wuaueng.dll
2014-11-24 08:23:27:265
892 9a0
Service *************
2014-11-24 08:23:27:281
892 9a0
Service ** START ** Service: Service startup
2014-11-24 08:23:27:281
892 9a0
Service *********
2014-11-24 08:23:27:635
892 9a0
Agent * WU client version 7.6.7600.320
2014-11-24 08:23:27:635
892 9a0
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-11-24 08:23:27:635
892 9a0
Agent * Access type: No proxy
2014-11-24 08:23:27:635
892 9a0
Agent * Network state: Connected
2014-11-24 08:24:14:827
892 9a0
Report CWERReporter::Init succeeded
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-11-24 08:24:14:827
892 9a0
Agent * Prerequisite roots succeeded.
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing global settings cache ***********
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS status server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * Target group: (Unassigned Computers)
2014-11-24 08:24:14:827
892 9a0
Agent * Windows Update access disabled: No
2014-11-24 08:24:14:951
892 9a0
DnldMgr Download manager restoring 0 downloads
2014-11-24 08:24:14:981
892 9a0
AU ########### AU: Initializing Automatic Updates ###########
2014-11-24 08:24:14:997
892 9a0
AU # AU disabled through Policy
2014-11-24 08:24:14:997
892 9a0
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-11-24 08:24:15:043
892 9a0
AU Initializing featured updates
2014-11-24 08:24:15:043
892 9a0
AU Found 0 cached featured updates
2014-11-24 08:24:15:397
892 9a0
Report *********** Report: Initializing static reporting data ***********
2014-11-24 08:24:15:397
892 9a0
Report * OS Version = 6.1.7601.1.0.196880
2014-11-24 08:24:15:397
892 9a0
Report * OS Product Type = 0x00000007
2014-11-24 08:24:15:428
892 9a0
Report * Computer Brand = VMware, Inc.
2014-11-24 08:24:15:428
892 9a0
Report * Computer Model = VMware Virtual Platform
2014-11-24 08:24:15:428
892 9a0
Report * Bios Revision = 6.00
2014-11-24 08:24:15:428
892 9a0
Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-11-24 08:24:15:428
892 9a0
Report * Bios Release Date = 2013-07-30T00:00:00
2014-11-24 08:24:15:428
892 9a0
Report * Locale ID = 1033
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU AU finished delayed initialization
2014-11-24 08:24:20:865
892 6a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:187
892 9a0
AU AU initiates service shutdown
2014-11-24 08:55:38:187
892 9a0
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:55:38:250
892 9a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:297
892 9a0
Service *********
2014-11-24 08:55:38:297
892 9a0
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:55:38:297
892 9a0
Service *************
Any ideas on how I can resolve this, or further troubleshoot?I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!. -
cant sync my iphone contacts with yahoo, it says "unknown error (4)" and tells me to come back later, been doing it for months. Any ideas on how to kill it?
Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
Delete version resource and its previous versions
I try to delete a versioning resource but I do not succeed. I create a version resource, when I delete it from the repository, xmldb delete it, but it don’t delete the previous versions. If I try to get a previous version by RESID I get it (why they not have been cancelled?). How can I cancel the resource and its previous versions? After many operations the occupied space increases but the repository is empty.
I use 10g (10.2.0.1.0) whit XMLDBI have found that the table xdb.xdb$resource contains contains all the resource, also the cancelled resources. I find it by the query
select extractvalue(value(p) ,'/Resource/CreationDate') pp, extractvalue(value(p) ,'/Resource/DisplayName') dn
-- ,abspath(9999)
from xdb.xdb$resource p
I find also all version resources. How can I really delete the resources?
thanks -
How i able to get back my pre-install software in ...
Hi everyone,
I accidently format my memory card, how i able to get back pre-install software in the memory card??? My phone is E66. Thanks.download preinstalled softwares from the following link
http://europe.nokia.com/get-support-and-software/product-support/nokia-e66/software
and from here for more softwares.
http://europe.nokia.com/find-products/devices/nokia-e66/downloads
¨Arm yourself because no one else here will save you¨ -
Attempting to download IOS6 onto iPad2. Two minutes after download began, the screen went black. Over two Hours since download began and I still cannot get the device to power back on. Battery was 90% when download began. Is there a way to force the power on?
worked for me, then general software update showed "ios 7.0.4" is up to date. awful long and frightening update but all well that ends well. this Sleep/wake AND Home worked to shut off.
SergZak
Currently Being Moderated Re: black screen wont turn on
Oct 10, 2013 3:44 AM (in response to Apfelwurm)
The following is how to do a proper reset of an iDevice:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally. -
Why does it kick me off the webpage to my desktop? I have to click on Safari or Chrome to get back to where I was.
Also, I loose the sound.Hello,
I would like to strongly recommend that you update your version of Flash Player to our currently released version (17.0.0.169) and enable auto updates. The version you are using is insecure and opening your computer (and all of your data) to being easily exploited by bad guys.
As for the error you are receiving, this is most likely a restriction from the website. Each developer is able to specify what the required minimum version of Flash and require their users to have at least that version installed. The detection that is occuring and the message that you are seeing on the website isn't part of Flash Player, but instead part of the website's code.
If you go to this page and click the "Check Now" button, what is displayed (OS, browser and version number)? Do you see the "tree" animation playing below?
Flash Player Help
Thanks,
Chris -
what is the best way to charg my ipod tuch is it bad to kill the batery fully our leve it in the red pleses get back to me asap thxs
pleses i dont want to distroy my ipod thxs
chadWhatever you do in terms of charging will not destroy your iPod.
Many people charge when it's convenient. Others just connect the iPod for syncing to the computer and leave it charging overnight, regardless of the ramaining charge level. Life of modern batteries is measured in full charge cycles. A charge cycle is either a full charge or any combination of small charges that adds up to 100% charge.
The only real recommendations I've seen (including from Apple) is to keep the batteries away from heat and have a full charge once a month. For this, discharge the battery to about 20%, then fully charge. -
I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]
Maybe you are looking for
-
Hi Experts, I have created a custom pop-up which acts like a search for contracts. This opens when i click a custom button on the standard screen. But I need to display some information on the pop-up on how to enter the search criteria and if ther
-
SInce I did the last software upgrade, I cannot open ITUNES and also SKYPE. The softwares crash when trying to open them, I've also tried downloading again both softwares but do not work. Please, advise on solving this problem.
-
- I created a panel with a titled border. - I have a background image. - There is a gray rectangle around the title in the border that I don't want to have because I want to see the background image. How can I handle this?? With panel I used setOpaqu
-
Defective mp3 - horrible cust serv
I wish i had read some of the horror stories with sony customer service BEFORE I purchased something from them! I purchased an MP3 player as a present in the beginning of december. When opened it was non functioning and I went to the web site and ope
-
When I try and purchase from itunes I receive the following message: Your Purchase Could Not Be Completed For assistance, contact iTunes Support at www.apple.com/support/itunes/ww/. I have contacted Apple support on 4 occassions and each time they te