How to accelerate the depreciation posting for the desired usefull life

Hi,
we are having issues in accelerating the depreciation on some assets, we want these assets to depreciated based on the revised usefull life
For example: if the asset CAP date is 01/01/2009 with usefull life 3 years
we change the useful life on assets from 3 years to 2.5 years (As we want this asset to fully depreciate in May 2011), how can we do with out using ABAA. these assets should be fully depreciated on the desired period as mentioned above.
We don't have smoothing turned on, but system is not calculating correctly, either it is fully depreciating the total amount earlier or later than expected period.
any help is truely appreciated.
Thanks
Smitha

Hi Ajay,
Thanks a lot for your response!
We just went live in Sept 2010 and our company doesn't want to go for unplanned depreciation option/ transfering the assets,
as in the legacy system they were able to enter the remaining usefull life on the asset and the assets were depreciating as intented.
we have given the above options but they were requesting for some other ideas.
what is the use of expaired usefull life in asset master record, we were changing the expired usefull life but it is not at all effecting the depreciation calculation.
Please advice
Thanks
Smitha

Similar Messages

Depreciation posted for the wrong asset class

Hi Experts
An asset was posted for the wrong asset class. Invoices for this asset were already posted and depreciation was posted for several months. Now we realize the mistake and want to correct it. How can we reverse the origanl documents including the depreciation and post it to the correct asset class accounts?
Thanks
Ofer

Hi Ofer,
you can transfer the depreciation to the new asset. Why you want to reverse th edepreciation?
Generally depreciation can not reversed. If you want to reverse the depreciation you can enter depr. key "0000" and make a repead run. In that case the depreciation will be reversed (posted oposite) for alle open fiscal years.
regards Bernhard

IMovie appears to be picking a random frame from a project that it assigns as the Thumbnail/Poster for the final video that is shared via iMovie Theater. How does it choose this frame, and is there a way to change this? I cannot find this anywhere.

This question was posted back in 2013, and I'll having it today. Anyone know what the deal is with the system selecting a theater image with NO way to change it--better yet--has anyone figured out a way to change it? Not a clue, do you know wherethe theater files are located on a MAC?

I can't answer your first question.
The default location for the imovie Theater.theater package is in your user / Movies folder.

Urgent:Restart the Depreciation posting Period

Hi,
We are having a problem. We are working on 4.7 version using the depreciation program RAPOST2000. The user executed the depreciation run for the period 01.2008 . The was not successful, subsequently they closed the periods and opened the 02.2008 period.Now the user is trying to execute the depreciation program for the period 02.2008, and they got the error " Restrat the last terminated program".
   I suggested the business to open the period to process the posting in period 01.2008. Business is reluctant to open the period , which will effect their business.
   Can any one suggest me a way , so that without opening period , how to do the unposted amounts in the current period i.e. 02.2008.
   There is no batch input session created for the depreciation runs.
   Please advise me how to go about it. Many thanks in advance
Thanks
   Lakshmi Narayana

Hi
If the business is not interested to reopen the peiod then u run the dep with unplanned posting run then.
I hope it will suffice ur requirement.
Regards
madhav

Account posting for the GR of subcontract PO

Hi experts;
We have a special requirement about the account posting for the GR of subcontract PO, 3POP process is used here means we create the SO, PR is created automatically. then convert to PO (Account assignment 'E', subcontract PO) . Basically now when the account document is created upon GR of the PO (101 E for FGI, 543 O for Component), the posting is like below:
Itm PK CoCd Account Account short text     Amount in LC LCurr         Amount Crcy      LC2 amount Trs
    1 89 1000 792000   Finished goods inven        100.00 EUR          100.00 EUR                  BSX
    2 96 1000 191100   Goods Rcvd/Invoice R         90.00- EUR           90.00- EUR                  WRX
    3 91 1000 893010   Cost of goods sold          100.00- EUR          100.00- EUR                  BSV
    4 86 1000 417001   Purchased services           90.00 EUR           90.00 EUR                  FRL
    5 99 1000 300000   Inventory - Raw Mate         20.00- EUR           20.00- EUR                  BSX
    6 81 1000 400020   Raw materials consum         20.00 EUR           20.00 EUR                  GBB
Then the requirement is that the line item 3,4 should be combined together and 10.00- value posted. (Maybe then the transaction is BSV or PRD?)
Anybody know how to fit this gap? kindly telll me. Appreciate!
Hoping for a positive & prompt response

Hi Gaito,
Thanks! but this configuration is not the right one. This is for the different posting like below. But can't conbine BSV and FRL into together.
Posting schema without price differences:
Stock account FERT : 400 +
Stock change : 400 -
GR/IR clearing acct : 250 -
External service acct : 250 +
Compon. stock account : 100 -
Consumption account : 100 +
Posting schema with price differences:
Stock account FERT : 400 +
Stock change : 350 -
Price difference : 50 -
GR/IR clearing acct : 250 -
External service acct : 250 +
Compon. stock account : 100 -
Consumption account : 100 +
Regards
Jimmy

How to get actual Hours Posted for Particular Month?

Hi,
I am trying to write a report which should extract the hours posted for the selected month by phase code
What I did is retrieved AUFPL from AFKO by giving Project number in PRONR
Later went to AFVC took OBJNR and the went to COSS and by entering Value type :04 (Actual Costs)
I got entries..I see entries in MEG001 ,MEG002....
but i am confused becasue it is until MEG016 ...
Our fiscal year starts in OCt 01.. so where do they post on Oct 01?
will it be MEG001? or MEg013?
Right now Septemeber values are posting in MEG012...
Rgds
Vara

Use CN48 T code.
If you watned to track cost which has been posted vai CATS & watned to go for the development than better approach is to start from CATSDB and further tables....
With Regards
Nitin P.

How to 'force in' the Depreciation Area for an Asset after it was created

Hi,
When I created an new asset under a new asset class, I forgot to set-up the depreciation area for that class. Now after I have saved/created the asset, I get this error : No depreciation areas have been defined for asset 1012500000-0. How do I 'force-in' the depreciation area now after it has been setup.

try and read docu to tcode AFBN
(if your problem is in production, consult SAP-OSS)
A.

How to get the depreciation areas for an asset in particular period

Hi frndz,
how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
Thanks and regards.
Harisumanth.Ch

Try table ANLB, then read ANLC.
Regards.

Posting an unplanned depreciation run for the previous period

Hi SDN forum,
May I just ask if it's possible to run an unplanned posting run for a previous period wherein the depreciation run has already been executed?
The scenario is more like a "repeat unplanned posting run"
I can't seem to include this unplanned depreciation whenever I select the repeat run for the previous period.
Please help.
Thanks

Hi
Through T.Code: ABAA you can able to post unplanned dep for previous period.
Executing AFAB for previous
1 - open FI Periods (OB52)
2 - Post Unplanned Dep T.Code: ABAA
3 - Run AFAB with Repeet run & Test run
you feel it is ok with test run execute production run
Regards
Viswa

How to revrse the documnt posted through the Depreciation run AFAB

Hi,
Please advise, how to revrse the documnt posted through the Depreciation posting using tcode AFAB.
Thanks & Regards
Jai

Hi JayChandra
Hope I gave my reply vide your earlier todays thread Re: How to reverse the document posted through AFAB(Depreciation run)
Please check The answer is
You can not reverse
Make your correct changes in Asset Master/Depreciation data and rerun AFAB
System posts the difference

Depreciation - Post in the Previous Year

Hi,
I am trying to post the depreciation for Jan 2010, but the system is giving the error that I need to post in the preious year first.
However when i am trying to post the depreciation for the previous year, its giving the error that previous year is closed. Can anybody help me how to resolve this issue. Thanks.
Regards,
S.Sumana.

Hello Sumana,
I have encountered similar issue in one of my clients. What you need to do to remedy the situation is that you need to open the Asset fiscal year in OAAQ and then post depreciation month wise till the current year start. For posting depreciation you also need to open the old accounting period but if there were no asset postings in previuos years then you do not have that risk of anything getting posted in books(which are already closed) in those prior fiscal years. This was from books point of view you maintain status quo.
Close the previous asset years and posting years once you are done with depreciation posting for a particular year.
After you come upto date you can run the depreciation normally in current year.
Regards,
Vijay

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to get the loaded cost for the Parked Purchase Order Invoices.

Hi,
Could any one of you please help me out to find out how the loaded cost is calculated for Parked Purchase Order Invoices which have not been posted. The problem is that if the invoice is posted the ekbe-wrbtr field contains the total amt for any particular line item, i.e. the (material cost + unplanned costs + taxes ).
But for the documents which are not posted ekbe-wrbtr does not have all the key data fields as that of a posted document. Is there any way out to find the total cost for the line item which is not posted.
Please try to help me..
Thanks & Regards,
Sanjay.

in that case u have to get the document amt of that accouting Document of PO invoice.
how --->
get the IR number from EKBE
CALL FUNCTION 'FI_DOCUMENT_RECORD'
    EXPORTING
      I_AWTYP            = 'RMRP'
      I_AWREF            = W_AWREF1----->IR of Po
      I_AWORG            = W_GJAHR1----->year
    I_AWSYS            = ' '
    I_AWTYP_INCL       = ' '
    I_AWTYP_EXCL       = ' '
    I_BUKRS            = ' '
    TABLES
      T_DOCUMENTS        = T_DOC.--->here u get the accouting document number.
Regards
Prabhu

How to create an marketing attribute for the busines partner

hi guys,
can any body help.
how to assign/create the marketing attribute set to the business partner.
is there any function module which to create the marketing attribute for the business partner by passing the BP GUID.
if any body is having an sample code can u please post it.
regards
viswag

Hi Viswa,
In CRM 4.0, marketing attributes set can be created at T-code [CRMD_PROF_TEMPL]
The created attribue set can be assigned to BP at T-code [CRMD_PROF_BP]
The other way you can open the BP, in marketing at marketing attributes tab your can assign the created attribute set.
regards
satish kumar
*-Reward points if found helpful.

How do you show thumbnail images for the contacts?

How do you show thumbnail images for the contacts on the iPod?
-Thank You

In another thread I posted a suggestion to try when the iPhoto app in the Application folder will not work:
after upgrading the OS, iPhotos (and Aperture for that matter) should still be in the Applications folder...
And running well in 10.10.3.
If it stops running in a next "update" do not throw it away: most apps will continue running as follows:
In the Applications folder "rightclick" (CTL+click) the iPhoto app, then "show package contents", then click the MacOs folder open: you see the real app (dark grey), rightclick this and choose "make alias", an alias is made, move this alias to the Applications folder and use it to run iPhoto.
Same for Aperture.
In older OS this survived several upgrades....
Lex

How to accelerate the depreciation posting for the desired usefull life

Similar Messages

Maybe you are looking for