How to access CIN tab in BDC for xk01

I am developing a program using BDC of xk01,but the CIN tab which holds PAN in this transaction is not being accessed if I run the bdc in N mode.When I am running it in A mode,upon manually clicking the CIN tab the further proceedings are working fine. Please suggest how do I automate the access for CIN tab.

Dear Pratik Ranadive   ,
1. Go to XK01.
2. Go to CIN tab which holds PAN number.
3. Check F1 details for that particular Field. Note the Program Name & Screen Number (for Batch Input)
For eg : see the fig,
4. Now go to your BDC report, locate the recording regarding for above fields.
PERFORM bdc_dynpro      USING 'SAPMV45A' '4003'.
PERFORM bdc_field          USING 'BDC_OKCODE'
                                        '=T\05'.
Here, '=T\05' stands for Tab number 5. Count the tab number in your CIN screen. If it comes at position 6. then Change the above line of code as follows.
PERFORM bdc_dynpro      USING 'SAPMV45A' '4003'.
PERFORM bdc_field          USING 'BDC_OKCODE'
                                        '=T\06'.
Regards,
NG

Similar Messages

How to activate CIN tab in Vendor Master

How to activate CIN tab in Vendor Master

Hello
Goto T.code OMT3E
Select 'User screen Reference'
Click New Entries
Enter the *SAP user name and give ' * ' in SRef: user and save the entry*.
Maintain all the user names for whom you want the CIN Details Tab in Vendor master.
Regards
Gregory Mathews

Question How to switch between tabs automatically? for example every 30 seconds

Question
How to switch between tabs automatically? for example every 30 seconds

Tab Mix Plus has that feature.
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

How to add new tab after reason for rejection tab using tcode va01

Hello,
how to add new tab after reason for rejection tab using tcode va01.

Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM

Problem in doing BDC for XK01

Hi all,
i am doing BDC for XK01 with Line Item for Bank Details(Table Control..)
With 3 Internal table
IT_dummy to get the flat file
IT_vend for Header details
IT_bank for Item Details
in this there is a Nested loop
Loop at it_vend.
perform bdc
loop at it_bank.
concatenate................
endloop.
endloop.
because of the above nested loops..it's bit slow..
& i am trying to do with a single internal table..
The problem is..
with the header data it's not picking all the item data(it's picking only one..)..help me in resolving the problem..
Below the code..
REPORT ZMM_BDCTC1 NO STANDARD PAGE HEADING LINE-SIZE 255.
PARAMETER:P_FILE TYPE RLGRAP-FILENAME.
DATA BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF IT_DUMMY OCCURS 0,
 TYP,
 DES(255) TYPE C,
 END OF IT_DUMMY.
DATA:DELIMITER VALUE ',',
 cnt(4) TYPE N,
 L_FNAM(30) TYPE C,
 FILENAME TYPE STRING.
TYPES:BEGIN OF TY_FINAL,
 N(4) TYPE C,
 LIFNR TYPE RF02K-LIFNR,
 BUKRS TYPE RF02K-BUKRS,
 EKORG TYPE RF02K-EKORG,
 KTOKK TYPE RF02K-KTOKK,
 NAME1 TYPE LFA1-NAME1,
 SORTL TYPE LFA1-SORTL,
 LAND1 TYPE LFA1-LAND1,
 AKONT TYPE LFB1-AKONT,
 FDGRV TYPE LFB1-FDGRV,
 WAERS LIKE LFM1-WAERS,
 M(4) TYPE C,
 BANKS TYPE LFBK-BANKS,
 BANKL TYPE LFBK-BANKL,
 BANKN TYPE LFBK-BANKN,
 KOINH TYPE LFBK-KOINH,
 END OF TY_FINAL.
DATA: IT_FINAL TYPE TABLE OF TY_FINAL,
 WA_FINAL TYPE TY_FINAL.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
 PROGRAM_NAME = SYST-CPROG
 DYNPRO_NUMBER = SYST-DYNNR
IMPORTING
 FILE_NAME = P_FILE.
 FILENAME = P_FILE.
 CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = FILENAME
 FILETYPE = 'ASC'
 tables
 data_tab = IT_DUMMY.
START-OF-SELECTION.
LOOP AT it_dummy.
 IF it_dummy-typ = 'H'.
 SPLIT it_dummy-des AT delimiter INTO WA_FINAL-lifnr "Populating Header Table
 WA_FINAL-bukrs
 WA_FINAL-ekorg
 WA_FINAL-ktokk
 WA_FINAL-name1
 WA_FINAL-sortl
 WA_FINAL-land1
 WA_FINAL-akont
 WA_FINAL-fdgrv
 WA_FINAL-waers.
 WA_FINAL-N = WA_FINAL-N + 1.
 WA_FINAL-M = WA_FINAL-M + 1.
 ELSEIF it_dummy-typ = 'I'.
 SPLIT it_dummy-des AT delimiter INTO WA_FINAL-BANKS
 WA_FINAL-BANKL
 WA_FINAL-BANKN
 WA_FINAL-KOINH.
 APPEND WA_FINAL TO IT_FINAL.
 ENDIF.
ENDLOOP.
LOOP AT IT_FINAL INTO WA_FINAL.
WRITE:/ WA_FINAL-N,
 WA_FINAL-LIFNR,
 WA_FINAL-BUKRS,
 WA_FINAL-EKORG,
 WA_FINAL-KTOKK,
 WA_FINAL-NAME1,
 WA_FINAL-SORTL,
 WA_FINAL-LAND1,
 WA_FINAL-AKONT,
 WA_FINAL-FDGRV,
 WA_FINAL-WAERS,
 WA_FINAL-M,
 WA_FINAL-BANKS,
 WA_FINAL-BANKL,
 WA_FINAL-BANKN,
 WA_FINAL-KOINH.
ENDLOOP.
data: WA_FINAL1 like line of IT_FINAL.
clear WA_FINAL1.
******************BDC STARTS***********************
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = 'ZMM_BDCTAB'
KEEP = 'X'
USER = SY-UNAME.
Clear wa_final.
LOOP AT IT_FINAL INTO WA_FINAL.
WA_FINAL1 = WA_FINAL.
CLEAR BDCDATA[].
AT NEW N.
cnt = 1.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
 'RF02K-KTOKK'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'RF02K-LIFNR'
 WA_FINAL1-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
 WA_FINAL1-BUKRS.
perform bdc_field using 'RF02K-EKORG'
 WA_FINAL1-EKORG.
perform bdc_field using 'RF02K-KTOKK'
 WA_FINAL1-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'LFA1-LAND1'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'LFA1-NAME1'
 WA_FINAL1-NAME1.
perform bdc_field using 'LFA1-SORTL'
 WA_FINAL1-SORTL.
perform bdc_field using 'LFA1-LAND1'
 WA_FINAL1-LAND1.
perform bdc_dynpro using 'SAPMF02K' '0120'. "ERROR CLEARED
perform bdc_field using 'BDC_CURSOR'
 'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
 'LFBK-KOINH(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
ENDAT.
*ENDON.
IF WA_FINAL1-N = WA_FINAL1-M.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO L_FNAM.
perform bdc_field using L_FNAM
 WA_FINAL1-BANKS.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO L_FNAM.
perform bdc_field using L_FNAM
 WA_FINAL1-BANKL.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO L_FNAM.
perform bdc_field using L_FNAM
 WA_FINAL1-BANKN.
CONCATENATE 'LFBK-KOINH(' cnt ')' INTO L_FNAM.
perform bdc_field using L_FNAM
 WA_FINAL1-KOINH.
*ENDDO.
cnt = cnt + 1.
ENDIF.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
 'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
*AT NEW LIFNR.
perform bdc_field using 'LFB1-AKONT'
 WA_FINAL1-AKONT.
perform bdc_field using 'LFB1-FDGRV'
 WA_FINAL1-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
 'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
 'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
 'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'LFM1-WAERS'
 WA_FINAL1-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
 'RF02K-LIFNR'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
AT END OF M.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'XK01'
TABLES
DYNPROTAB = BDCDATA.
ENDAT.
CLEAR WA_FINAL1.
CLEAR WA_FINAL.
ENDLOOP.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
*********************BDC ENDS***********************
 Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
 Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
 CLEAR BDCDATA.
 BDCDATA-FNAM = FNAM.
 BDCDATA-FVAL = FVAL.
 APPEND BDCDATA.
ENDIF.
ENDFORM.
Flat File is..
HAAA45,1000,1000,0002,NAME45,N,IN,31000,A1,USD
IIN,1000,1021,Name45
IIN,1000,1022,Name45
HAAA50,1000,1000,0002,NAME50,N,IN,31000,A1,USD
IIN,1000,1023,Name50
IIN,1000,1024,Name50

Regarding avoiding the loop I have a suggestion, though I have not tried this .
SAP help says " Using the internal table bdc_tab, you can provide any number of screens of the called transaction with input and user actions. " .
Above implies you can load all records in the itab bdc_tab when doing call transaction. Say, your bdc_tabl has 30 records for 1 pass of the transaction. You need to update 10 vendor records. You simply load up all 300 records into bdc_tab. After every 30 record loads, you simulate a 'SAVE' press in your program but do not leave the transaction. Rather you simulate the keystroke that takes you to the first screen of XK01 after the save if not aready there, and start loading up the next transaction.

HOW TO HANDLE MULTIPLE VALUES IN BDC FOR A PARTICULAR FIELD.

I THINK IT IS HANDLING OF TABLE CONTROLS IN BDC
PLEASE LET KNOW WHETHER THESE TWO ARE SAME CONCEPT OR NOT
HOW TO HANDLE TABLE CONTROLS IN BDC
Moderator message - Please do not use all caps. Please do not ask interview questions - post locked
Edited by: Rob Burbank on Jun 26, 2009 10:02 AM

Hi,
To handle table control in BDC you will have to enter at least one record in the table control and there after use the index number to increment to the next line item.
Say you run a recording for a transaction which has a table control (ME21), here after you have completed the recording, you'll see the code which will have sometjing like <fieldname>(01) and the entered value. that valeu has been entered as the first line item (01 being the index).
You will have to replace the hard coded line item index with a variable and inside a loop increment the item index. Once you reach the maximum allowed line items on your screen juct press the pagedown button (or insert new row) and reset the index to 1.
Following is a code snippet I used while uploading data for ME31K (vendor contract). It is not the complete code but does show how your code needs to be changed with using index for line items.
Here we assumne that the maximun number of lines displayed at a time on the screen is 14.
<< Unformatable code removed >>
Hope this helps.
Regards,
Sachin
Edited by: Rob Burbank on Jun 26, 2009 10:03 AM

I need to restore a calendar to my iPad. I checked Itunes but the iPad is not listed as I ahave never sync'd it before. I do have iCloud but not sure how to access to sync. Thanks for any help.

Need to find out how to get a calendar back on my iPad. Pretty new to Apple. Only one pf my 5 calendars was deleted. Do have iCloud backup just not sure how to access. iTunes has never been sync'd with iPad. Thanks for any help.

No problem. See the restoring topic of:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

How to access Master Data in ERP2005 for SD

Hi All,
I installed ERP2005 in my system with MS SQL.
I do not know how to Access the Master Data in the system for SD.
Can anybody guide me.
Thank you,
Ravi.

Hi Ravi,
Firstly, have you created any Master Data. If yes, you will be able to access the same.
Sales Order Management Transactions Codes:
GENERAL ORDER MANAGEMENT
Reviewing Document Flow VA03
Searching for a Customer Sales Order by Serial Number ZV11
Order Inquiry ZV33
SALES ORDER PROCESSING
Creating Sales Order VA01
Maintaining a Sales Order VA02
Displaying a Sales Order VA03
Releasing an Order or Delivery from Credit Hold: Non-Flooring VKM1
Releasing an Order or Delivery from Flooring Hold ZKM1
Manually Pre-authorizing Blocked Credit Card Orders Z.14
Display List of RMAs by Customer VA05
Confirm RMA Goods Receipt VL02
Generate list of open return orders for deletion VA05
Display Customer returns eligibility MCSI
Removing a Billing Block (Approving Credit/Debit Requests) V.23
PRICING MASTER DATA
Create Pricing VK11
Creating a Sales Deal VB21
Maintaining a Sales Deal VB22
Displaying a Sales Deal VB23
Maintaining Prices VK12
Displaying Prices VK13
MATERIAL MASTER DATA
Creating Material Substitution Master Data VB11
Maintaining/Deleting Material Substitution Master Data VB12
Displaying Material Substitution Master Data VB13
Creating a Bundled Master MM01
Creating a Sales BOM CS01
Maintaining a Sales BOM CS02
Displaying a Sales BOM CS03
CUSTOMER MASTER DATA
Creating Partner Records XD01
Maintaining Customer Master Data XD02
Displaying Customer Master Data XD03
Deactivating a Partner VD06
CUSTOMER CREDIT INFO
Creating/Maintaining New Customer Credit Information FD32
Displaying Customer Credit Information FD33
Blocking or Unblocking a Customer VD05
SHIPPING
Creating a Delivery VL01
Displaying a Delivery VL03
Deleting a Delivery VL02
Shipment Inquiry / Display VT03
Adjusting Transfer Order - Confirmation Quantity LT12
Collectively Confirm Transfer Order LT25
Batch Shipment Confirmation VL19
Creating Service Provider/Carrier Master Data XK01
Maintaining Serive Provider/Carrier Master Data XK02
Displaying Service Provider/Carrier Master Data XK03
Maintaining Product Master/Serial # Profile/Unit of Measure/Shipping Unit MM02
IDoc Inquiry WE02 / WE05
Workflow Instructions
BILLING
Invoicing a Customer Shipment VF01
Reprinting an Invoice VF31
Releasing a Sales Order for Billing V.23
Creating an Invoice by Using the Billing Due List VF04
Checking Open Billing Documents VF05
Create Credit/Debit Memo FB01
A/R
Controlling Total Debit/Credit bkgs F.03
Generate FI Account balance F.08
Generate Month-to-date Inv. register F.02
Process payments FBZ1
Rqst Individual Customer Corresp. FB12
Generate Customer Correspondence F.61
Enter Batch totals under Control ttl FB07
Display G/L Acct. totals FBL3
Reverse Posted Amounts FB08
Customer Refunds FBL6
Customer Refund to other than Payer FB05
Clearing Debit/Credit on Cust. acct. FB1D
Customer Balance in Local Currency F.23
G/L Account Balance Report F.08
Create Invoice - legal entity adjust FB01
Generate Cust. Acct. statements F.27
Generate Dunning Letters F150
Generate Billing Due List VF04
Generate Blocked Billing Doc list VFX3
Inq. via Credit Release Screen VKM1
List orders by partner VA05
Past Due invoices by customer FD11
Check number info by G/L account FBL3
Display customer Line items FBL5
TREASURY - CASH APPLICATION:
Post Customer payments FF68
Verify if A/R is updated FB03
Hope The above details helps you.
Regards,
Rajesh Banka

How to add long text in bdc for transaction fb01 ?

IN the existing program of bdc fb01
i have to add a long text field
but it gets stuck while i process in sm35
is there a fm to add the field directly
thanks in a advance

Hi
You can upload the Long texts separately into the transaction using the CREATE_TEXT fun module
Need to pass the correct parameters like OBJECT,ID, OBJECTNAME and LANGuage with the proper declarations.
see the sample code and do accordingly
REPORT zmm_longtext_sm
 NO STANDARD PAGE HEADING
 LINE-SIZE 255.
Description : This Program is used to Upload the Service Master
 : Long Texts using the Fun Module CREATE_TEXT
Internal Table for Upload of Long Texts Data
DATA: BEGIN OF itab OCCURS 0,
 asnum like asmd-asnum, " Service No
 text LIKE tline-tdline, " Long Text
 END OF itab.
To create Long Text lines for CREATE_TEXT function module
DATA:BEGIN OF dt_lines OCCURS 0.
 INCLUDE STRUCTURE tline. " Long Text
DATA:END OF dt_lines.
Variable declarations for CREATE_TEXT function module
DATA : dl_name TYPE thead-tdname, " Object Name
 dl_lan TYPE thead-tdspras. " Language
Constants
CONSTANTS:
Object ID for Long Text of Service Master
c_best TYPE thead-tdid VALUE 'LTXT',
c_material TYPE thead-tdobject VALUE 'ASMD'. " Object
Parameters
PARAMETERS p_file LIKE rlgrap-filename.
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = syst-cprog
 dynpro_number = syst-dynnr
 IMPORTING
 file_name = p_file.
Start Of Selection
START-OF-SELECTION.
*To Upload Flat file
CALL FUNCTION 'UPLOAD'
 EXPORTING
 filename = p_file
 filetype = 'DAT'
 TABLES
 data_tab = itab
 EXCEPTIONS
 conversion_error = 1
 invalid_table_width = 2
 invalid_type = 3
 no_batch = 4
 unknown_error = 5
 gui_refuse_filetransfer = 6
 OTHERS = 7.
Upload the Texts
SORT itab BY asnum.
LOOP AT itab.
 dt_lines-tdformat = 'ST'.
 dt_lines-tdline = itab-text.
 APPEND dt_lines.
 dl_lan = sy-langu.
 concatenate '00000000000' itab-asnum into dl_name.
Call the Function Module to Create Text
 CALL FUNCTION 'CREATE_TEXT'
 EXPORTING
 fid = c_best
 flanguage = dl_lan
 fname = dl_name
 fobject = c_material
 save_direct = 'X'
 fformat = '*'
 TABLES
 flines = dt_lines
 EXCEPTIONS
 no_init = 1
 no_save = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
 WRITE:/ 'Long Text Creation failed for Service No'(001),
 itab-asnum.
 ELSE.
 WRITE:/ 'Long Text Created Successfully for Service No'(002),
 itab-asnum.
 ENDIF.
 AT END OF asnum.
 REFRESH dt_lines.
 ENDAT.
ENDLOOP.
Reward points for useful Answers
Regards
Anji

How to access the compass in maps for ipad

How do you turn on the compass in the new Maps app for the iPad?

For some reason the the compass app is not included in the pre installed apps on the iPad. You might like to try Compass 54 instead.
http://itunes.apple.com/gb/app/compass-54-pro/id458958949?mt=8

How to rearrange (sort) tabs in Firefox for Android?

On Firefox for Android, is it possible to rearrange or sort open tabs? On Chrome for Android, it is a simple drag and drop process. I've spent way too much time trying to figure this out and, so far, it does not seem possible to me (which I find hard to believe).

HI, Sorry right now, firefox don't have that option.
You can provide your feedback, so it will helpful to add this features to upcoming firefox version
*https://input.mozilla.org/feedback/

How To Access Variables In Process Model For Use In Main Sequence

Hi everyone, in my sequence file I callback the PreUUT sequence file. I want to be able to use one of the local variables I assign in this callback sequence in my main sequence. In my main sequence this variable will trigger if I should run some tests or not in my main sequence. Is this possible? How would I do this?
Thanks so much!

U need to make a parameter in your Callback, parameters are seen outside of sequences, then in PreUUT u will make statement to update parameter, or use the parameter in your callback directly
Parameters.MyPara=Locals.MyLoc
etc

How to Access Font on Mac Floppy for PC?

I have a MacBook Air and an iPad personally and a bunch of Dell deskstops running Windows 7 at work. I have a Mac 3.5" floppy containing a TrueType font that I need to use in the PC environment. I don't know if the floppy is 800K or 1.44MB. This font is not otherwise available. What hardware and/or software either on the Mac or PC side do I need to purchase to be able to make this happen?

Someone.....anyone, please please guide me on the above mentioned issue....

BDC for XK01

Hi All,
iam creating & updating Vendor master details through BDC Recording by following syntax
      DATA :lt_bdcmsgcoll1 TYPE STANDARD TABLE OF bdcmsgcoll.
      DATA opt TYPE ctu_params.
      opt-dismode = 'N'.
      opt-updmode = 'X'.
      opt-cattmode ='N'.
      opt-defsize = 'X'.
      opt-racommit ='X'.
      opt-nobinpt = 'X'.
      opt-nobiend = 'X'.
      CALL TRANSACTION 'XK01' USING bdcdata OPTIONS FROM opt
                                             MESSAGES INTO lt_bdcmsgcoll1 .
i have given opt-dismode = 'N' then vendor are NOT getting created.When i give opt-dismode = 'A' or 'E' then vendors are getting created / updating .
can any one suggest me how to proceed ?
regards
Fareed

Hi Fareed
>
Shaik Mohd Fareeduddin wrote:
    opt-updmode = 'X'.
The update mode should be either:
A, S, L or blank.
Please see help excerpt below:
The UPDATE addition determines the processing mode for batch input processing. You can specify a character-type object for upd. Its possible content and its effect are displayed in the following table. Without use of one of the additions UPDATE or OPTIONS FROM, the effect is the same as if upd had the content "A".
"A"         Asynchronous update. Updates of called programs are executed in the same way as if in the COMMIT WORK statement the AND WAIT addition was not specified.
"S"         Synchronous processing. Updates of the called programs are executed in the same way as if in the COMMIT WORK statement the AND WAIT addition had been specified.
"L"          Local update. Updates of the called program are executed in such a way as if the SET UPDATE TASK LOCAL statement had been executed in it.
Kind regards,
Robert

How add new tab after reason for rejection tab using tcode va01

Hello,
How to add new tab after Reason for Rejection tab using tranzaction code VA01.
pls suggest solution.

I don't think you can add a tab after reason for rejection tab. There are custom tab, which you can use for your convenient, given by SAP. You can look into the below details:
Program : SAPMV45A
Screen: 8459(Item) and 8309(Header).
Kuntal.

How to access CIN tab in BDC for xk01

Similar Messages

Maybe you are looking for