How to access CQ configuration settings using CQ HTTP client?

Hi,
I am trying to access CQ configuration in my application using CQ HTTP client. I am able to access through ConfigAdmin, but not directly.
Please suggest a way to access the configuration directly by CQ HTTP client.
Is CQ proxy settings directly available to CQ HTTP client? if so, how do we access it?
Thanks

Yes it is directly available. The proxy does not need to be explicitly configured for each HttpClient since it is done automatically when the com.day.commons.osgi.wrapper.commons-httpclient gets activated. Make sure your bundle imports [1] and call as HttpClient client = new HttpClient();
[1]
org.apache.commons.httpclient,version=3.1.0 from com.day.commons.osgi.wrapper.commons-httpclient (xx)
org.apache.commons.httpclient.methods,version=3.1.0 from com.day.commons.osgi.wrapper.commons-httpclient (xx)

Similar Messages

Need quick TIP: remove "Copy access and configuration settings" from added package

I added a modified package in APPVMAN with the option "Copy access and configuration settings".
Package is unpublished. But shows AD groups as a current package because I used the option "Copy access and configuration settings"
QUESTION:
How to Remove (and then add) the option "Copy access and configuration settings" from added package.
Cannot find it.
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

sorry for the panic :)
before publishing an updated package to existing groups of initial package I hit the option
"Copy access and configuration settings".
But first I wanted to test it for TEST group. Didn't think that AD settings will be applied (do it first time).
Just to confirm:
1. I will remove current groups from updated(unpublished package)
2. Will add Test group and test the package.
3 In case it is OK I can then add removed(needed) groups.
I want to be sure that after removing and adding needed groups all other settings will be intact.
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

How to configure JSS 4 with Firefox 21.0 to to use with HTTPS client authentication? It´s supposed that JSS allows an applet to access Mozilla user´s cert

We are trying to use HTTPS client certificate based authentication to access a Java Applet in Firefox v21.0. We have followed the instructions as per the below two urls to enable JSS 4 -
https://developer.mozilla.org/en-US/docs/JSS/Using_JSS<br />
http://docs.oracle.com/javase/6/docs/technotes/guides/deployment/deployment-guide/keystores.html<br />
http://download.java.net/jdk8/docs/technotes/guides/deployment/deployment-guide/keystores.html
We are using JRE version 1.7.0_25-b16 Java HotSpot(TM) Client VM in Firefox v21 but we are getting - <br />
security: Accessing keys and certificate in Mozilla user profile: null<br />
security: JSS is not configured
followed by SSK handshake failure when trying to load the client certificate.
<pre><nowiki>javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure
at sun.security.ssl.Alerts.getSSLException(Unknown Source)
at sun.security.ssl.Alerts.getSSLException(Unknown Source)
at sun.security.ssl.SSLSocketImpl.recvAlert(Unknown Source)
at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.connect(Unknown Source)
at sun.plugin.PluginURLJarFileCallBack.connect(Unknown Source)
at sun.plugin.PluginURLJarFileCallBack.retrieve(Unknown Source)
at sun.net.www.protocol.jar.URLJarFile.retrieve(Unknown Source)
at sun.net.www.protocol.jar.URLJarFile.getJarFile(Unknown Source)
at sun.net.www.protocol.jar.JarFileFactory.get(Unknown Source)
at sun.net.www.protocol.jar.JarURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFileInternal(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.getJarFile(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.access$1000(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.ensureOpen(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.<init>(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.deploy.security.DeployURLClassPath.getLoader(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath.getLoader(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath.getResource(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
at sun.plugin2.applet.Plugin2Manager.initAppletAdapter(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)</nowiki></pre>
The client cert based authentication is working when using IE v8 and IE v9 with the same JRE version (JRE version 1.7.0_25-b16 Java HotSpot(TM) Client VM)
Any help to resolve this issue will be very much appreciated.

Thank you for your response.
Yes we have added the client certificate file (.pfx) in the Firefox browser Certificate manager / Store. It's also showing the certificate in the View Certificate window. We could not resolve it yet.

How to access .asmx Web Service using JAVA? Newbie

Hello Experts,
Currently, I have a project where in I have to access a ,NET web service. It is made of C#. I just want to ask how will I start the accessing process? I made this simple equation on how my project is.
Java Project + C#.Net Web Service = Integration
1. Do i need to create a Web Service too for the Java Project? If yes, What are the necessary tools needed for the creation of this Java Web Service?
2. The .NET Web Service is available online. (It is made by other people).
3. Based on the equation, what is the equivalent technology for the + sign?
4. Can you site a concrete example for accessing a web service?
5. I'm new here. Totally I have no idea where to start.
6. Thank you experts.
Edited by: Benedict.Aluan on 05 30, 08 1:38 PM
Edited by: Benedict.Aluan on 05 30, 08 1:39 PM

Hello
Thanks a lot for your help ...
I am developing simple J2EE based web service client using IBM WSAD 5.1. I have used the following code to call .asmx web service in Java
String url = "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl";
     String namespace = "http://tempuri.org/";
     name = request.getParameter("txtName");
     try
          System.out.println("In Internet Service");
          ServiceFactory factory = ServiceFactory.newInstance();
          Service serv = factory.createService(new URL(url),new QName(namespace,"TempConvert"));
          System.out.println("Got Service......");
          Call obj = (Call)serv.createCall();
          System.out.println("Got Call......");
          obj.setProperty(Call.ENCODINGSTYLE_URI_PROPERTY,"");
          obj.setProperty(Call.OPERATION_STYLE_PROPERTY,"wrapped");
          obj.setTargetEndpointAddress(url);
          obj.setPortTypeName(new QName(namespace,"TempConvertSoap"));
          obj.setOperationName(new QName(namespace,"FahrenheitToCelsius"));
          obj.addParameter("param1",XMLType.XSD_STRING,String.class,ParameterMode.IN);
          obj.setReturnType(XMLType.XSD_STRING);
          System.out.println("Parameters Set.....");
          Object[] params = new Object[]{name};
          k = (String)obj.invoke(params);
          System.out.println("Result: "+k);
     catch(Exception e)
        System.out.println("Exception is : "+e);
    }But this code is throwing exception that
Invalid Address "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl"I have also tried this URL with Java Proxy. But it showing the same error.
Plz can u tell me how to access .asmx web service ?
Waiting 4 reply.

How to access Call Back Functions using *.dll in the Labview?

Hai,
I am Pavan Ram Kumar Somu.
I am new to Labview, currently I am working on MVB Interface.
I need to access the API functions from *.dll file in Labview, as of now , I am doing this with Call function Library node in Labview but it does not support the following data types like
    1. Pointer Arguments(To which memory it points in Labview)
    2. function pointers Arguments
    3 .pointers in structures and pointer structures in structures and many other data types.
Please Answer the below queries also:
1. How to pass pointer arguments to API functions in DLL and how to collect pointer
    return types from API functions in DLL
2. How to pass structure arguments to API functions in DLL and how to collect structure
    return types from API functions in DLL
3. How to use callback functions(nothing but function pointers) in Labview and how to
    collect callback fuctions return types from API functions in DLL
I need your help while passing these datatypes to API functions in DLL from labview.
Suggest me if there is any other alternative for implementing this task.
I am referencing some examples here:
Examples:
I)
Unsigned short int gf_open_device(void *p_device_config, unsigned long int client_life_sign_timeout, unsigned short int *device_error)
void *p_device_config: How to access/pass these arguments in LabView and to which memory location it points in LabView.
II) #include <windows.h>
     #include <process.h>
     HANDLE rcvEvent0, rcvEvent1;
/* Function call*/
CanGetReceiveEvent(handle[0], &rcvEvent0);
Above is a piece of C code, Now I want to use HANDLE datatype which is windows based, how to use these type in the LABVIEW.
With regards
Pavan Ramu Samu

"Somu" <[email protected]> wrote in message news:[email protected]...
Hai,
I am Pavan Ram Kumar Somu.
 
I am new to Labview, currently I am working on MVB Interface.
 
I need to access the API functions from *.dll file in Labview, as of now , I am doing this with Call function Library node in Labview but it does not support the following data types like
    1. Pointer Arguments(To which memory it points in Labview)
    2. function pointers Arguments
    3 .pointers in structures and pointer structures in structures and many other data types.
 
Please Answer the below queries also:
 
1. How to pass pointer arguments to API functions in DLL and how to collect pointer  
    return types from API functions in DLL
 
2. How to pass structure arguments to API functions in DLL and how to collect structure
    return types from API functions in DLL
 
3. How to use callback functions(nothing but function pointers) in Labview and how to
    collect callback fuctions return types from API functions in DLL
 
I need your help while passing these datatypes to API functions in DLL from labview.
 
Suggest me if there is any other alternative for implementing this task.
 
 
I am referencing some examples here:
Examples:
I)
Unsigned short int gf_open_device(void *p_device_config, unsigned long int client_life_sign_timeout, unsigned short int *device_error)
 
void *p_device_config: How to access/pass these arguments in LabView and to which memory location it points in LabView.
 
II) #include <windows.h>
     #include <process.h>
   
     HANDLE rcvEvent0, rcvEvent1;
 
/* Function call*/
CanGetReceiveEvent(handle[0], &rcvEvent0);
 
Above is a piece of C code, Now I want to use HANDLE datatype which is windows based, how to use these type in the LABVIEW.
 
With regardsPavan Ramu Samu
Search the forum (forums.ni.com) for callback, pointer or handle, and you'll find that it is all possible, but not very easy.
e.g.: http://forums.ni.com/ni/board/message?board.id=170&message.id=88974&requireLogin=False
Regards,
Wiebe.

How to install and configure OID using 11g R2 installers

Hi,
I need to install and configure OID, I am having installers of Oracle Identity and Access Management 11g (11.1.2.1.0).
Please let me know how to install and configure OID.
Thanks

Use the R1 IDM package. R2 is only for IAM.

How to access the Approvals task using url

Hi,
Please let me know how to access the approval tasks in BPM using the url.
I need to access the approval tasks from outside BPM
Thanks

Hi Latha,
There are many ways to pass parameters to 2nd page.
However try using hashmap.
1st page code in processformrequest:
import com.sun.java.util.collections.HashMap;
HashMap hashmap = new HashMap();
hashmap.put("var_enpid",enpid);
pageContext.forwardImmediately("XX_SECOND_PG", //Function Name of the 2nd page
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hashmap, // put Null if no parameters to pass thru hashmap
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO
2nd page code in processrequest:
String empid = (String)pageContext.getParameter("var_enpid");
Regards
Sanu

How to access to configuration page of the router through the windows phone 7 ?

Hi all
I'd like to know if there's a way to access to configuration page of the router through my windows phone 7.
I usually access the router by laptop as following: "192.168.1.1". but sometimes when I'm on my phone I need to reboot the router through my phone other then the laptop which is not near me...
I looked up for applications that should do the work, but unfortunately I got no positive result, so I'm reaching out to this very forum in order to find help and tricks so that I can figure it out
thank you in advance

Hi Happydz,
For help using Windows Phone please post in the Windows Phone forums on
http://answers.microsoft.com .
The MSDN Windows Phone Development forums are for developers to discuss writing their own Windows Phone apps.
That said, I'd expect you could connect to 192.168.1.1 from the phone's browser the same way you would from the laptop's browser.

How to access SOAP header without using SOAP message handler

I have a requirement to retrieve SOAP header information within each web services operation. So I can't use SOAP message handler. Is there any way to do that? BTW, I am not using workshop.
Thanks.

Howeve how can I put data into soap header in UDF? DynamicConfiguration won't work for soap header, right?
Which data do you want ot put into the Header section.
ASMA or Dynamic Configuration is used to read/ put the details from/ into the header elements.....
Refer: http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/frameset.htm
From the help section:
This information is not located in the payload of the message, but in additional message header fields.
Regards,
Abhishek.

How to access ports in windows using JDK 1.5 or later

Hi,
My task is to read an input from the parallel port and use a modem to dial a phone number connected to a seril port .
At the same time i am generating an SMS depending on the input i read from parallel port.To run this SMS program i need a new version of java.
I've been searching for days to find a way to access serial port in a new version.I managed only 1.1.8.
Please..
If someone has any idea may i know how to copy the necessary files (dll and packages) to JDK 1.5 or later please let me know.
I'm using windows platform:(
Thanks
goodnews
If anyone needs info about Accessing ports in windows using jdk1.1.8 just post below..I'll give what i have.

user12858801 wrote:
Hello,
Has there been any development with this post?after 3 years, what do you think?

How can i get the port used for https

Hi All,
does aynbody knows how can i get in the portal the port used for https connection, cause the link send by e-mail notification, when user has been invited in a room doesnt work...
i tried to use the command netstat -ao and i tried use the port that i get there.. but then i get message, when click on the link: "The page cannot be displayed"
we have following settings:
server port: ??
Web Protocol: https://
Thanks for suggestions!
Karol

Hi Karol,
by navigating to:
Content Administration -> Collaboration Content -> (Room Administration -> Related Topics) -> Configure Backend Properties for Rooms
you can change the Webprotocol to http:// and set server port to 50000 (default port).
To see the SSL Port you can go in the Visual Administrator to Services -> "HTTP Provider Services".
http://help.sap.com/saphelp_nw04/helpdata/en/a2/f9d7fed2adc340ab462ae159d19509/frameset.htm
Hope this helps,
Robert

Configurational settings for calling HTTP from ABAP

Hi,
I need to call HTTP from ABAP.
Other than ABAP code, what configurational settings (and functional settings, if any) I need to do for this scenario..
Please help...
Thanks,
Shivaa...
Moderator message - Duplicate post locked
Edited by: Rob Burbank on May 7, 2009 3:44 PM

Hi All,
I have a problem to pass a file.txt in a parameter of a web service.
Iam using CL_HTTP_CLIENT and I am passing the parameters (user, password and file):
clear wa_form.
wa_form-name = 'user'.
wa_form-value = '33333333333'.
append wa_form to it_form.
clear wa_form.
wa_form-name = 'password'.
wa_form-value = '11111111'.
append wa_form to it_form.
clear wa_form.
wa_form-name = 'file'.
wa_form-value = data. ---> "data" is a type string with the data of the file.txt.
append wa_form to it_form.
r_client->request->set_form_fields( fields = it_form ).
I have not problem with the user and password parameters.
Thank.

Problem accessing company resources remotely using Cisco VPN Client

I connect to my company's network remotely using Cisco VPN client both from a PC (v 4.0.1) and from a MacBook Pro (v 4.9.00)(same configs), and use Remote Desktop to connect to my work computer, and now i'm able to use Citrix to run applications on the company server.
The problem occurs on the Mac when I'm connecting from a location that uses the same private domain IP as our company's private domain. Our company's private domain is 192.168.1.x, so when I'm using the Mac on a WiFi router that happens to be set to 192.168.1.1, the Mac can connect using VPN but the remote desktop cannot connect to my work computer. Presumably, the Mac doesn't "know" that I'm trying to go through the VPN for the connection and not connect to something locally.
This problem seems to be unique to the Mac. Every Windows machine with the same client installed has no problems no matter what WiFi I've tried. The Mac works fine on any WiFi that is not 192.168.1.x.
However, since 192.168.1.x is very common (hotels, airports, etc., its a major problem with the Mac.
Suggestions are greatly appreciated!
Also, now that we're moving to Citrix, our administrator has created a webpage on the intranet that we launch applications from, but the Mac cannot find that page when connected to VPN from 192.168.1.x. Same problem.
Thanks in advance.

Hi,
I presume you have split-tunneling activated.
1. Make sure the 192.168.1.x is on the protected networks and on the MacBook client, disable "Allow local LAN access"
2. Create a separate group for the Mac users and assgn them a different pool (192.168.100.x )and advertise it in your company to point to the VPN Concentrator.
3. Use the NAT feature on your VPN concentrator.
If this helped, please rate.
Regards,
Daniel

How to access Oracle Apps from Linux or Unix Client

I want to access Oracle Apps 11i from a linux client or Unix client, but I don't have jinit for linux or Unix
regards,
Jonathan

Hi,
That is not a problem just you can get in to linux inet browser and put the hostname.domainname.com:portnumber/OA_HTML/US/ICSINDEX.HTM
So that you can get the apps sign on screen will be launched up and available to access in to Oracle applications.
The work could be done in solaris browser and linux browser is possible.
Thanks and Regards
Riyaas
Oracle Applications DBA
[email protected]
Kuwait

How to access (or configure) the web based Oracle Beehive workspaces client

Hello,
In the one of the Oracle Beehive online trial, there is a demo about working with workspaces using a web interface:
https://beehive-ondemand.oracle.com/Documents.html
I've been searching the documentation how can I access this web client on my installation, but I hadn't find the URL.
I'm wondering if this web client is included in the 1.4 version, if so, how can I access it? Do I have to configure it or install it? How?
Thanks for your help.
Edited by: user3585264 on Oct 18, 2008 9:33 PM

Hello
this client is not provided with the 1.4.1., but it is expected with the next release (in a couple of month normally, that's what great weith beehive releases, every 2-3 month you get a lot of news !! )
Stay tuned on MGMT - Kids, that's Oracle new anthem (or it should be :D, that song was everywhere during OOW, along with Time to Pretend)

How to access CQ configuration settings using CQ HTTP client?

Similar Messages

Maybe you are looking for