How to access Enter prise portal

Hai Friends,
EP is implimented in our co., I am new to EP. How 2 login 2 EP and how to Access plz tell me the procedure clearly.
I hope that I ll get spontanious answers from ur side.
Regards
Jaggu

Hi Jaggu,
Before you access EP you had to know the portal link and have portal logon information already.
For example:
http://<fully qualified computer name of EP server>:5<Instance number>00/irj/portal
If EP server name is test.domain.ext and instance number is 00, then
http://test.domain.ext:50000/irj/portal
After you enter the portal link on IE browser, a logon page will be comes up.
Then you can login if you have portal user account.
Best Regards,
Jacky

Similar Messages

How to access DMS through portal

Hi
We are planning to implement SAP DMS and also EP.
I want to know how to connect sap dms from r3 to EP, so that we can upload documents from KM to the content server.
I think the DMS to KM connector provides only read/display functionalities.
Please give me any useful documents/ links on this
Thanks in advance
Prasad

Hi Prasad
I will need same usage in future on a new project. DMS to KM provides only read/display really? And if you have documents can you send to me please.
Thanks

How to edit a standard Portal page in NWDS

I'm looking for a guide explaining how to pull a standard Portal Web Dynpro in to Netweaver Developer Studio, make changes to it, and deploy the changed copy to the Portal.
I have experience with the Portal and with adding ABAP Web Dynpros to it, but I'm new to NWDS and Java Web Dynpros.
I've searched online extensively but haven't been able to find a guide explaining how to access the standard Portal Java content.

Hope you mean to edit WebDynpro java application in NWDS. In this case, You need NWDS (on your desktop) and NWDI (to be configured on java server) to modify any standard WebDynpro java application.
Read the below help to understand better:
http://help.sap.com/saphelp_nw70/helpdata/EN/45/68d64260752a78e10000000a155106/frameset.htm

How to access a web service(.wsdl) from portal component.

Hi ,
Is there any document/tutorial available on how to access a webservice from portal component ?
I have found this linkhttps://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/g-i/how to access a web service.htm...
but the urls in the link are not working...
i want to know the steps to access webs service and sample code if some body has already done that..
Thanks for the help.
Lakshmi

Hi Lakshmi,
See the links below:
http://help.sap.com/saphelp_nw04/helpdata/en/f0/581140d72dc442e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a3/918340d990ce62e10000000a155106/content.htm
Hope this helps.
Regards,
Pooja.

How to access BAPI in enterprise portal perspective?

hi,I am venkat new to the portal.can anyone plz tel me how to access BAPI in enterprise portal perspective?is done through JCo or any other database connection?I hav not seen in System Landscape about BAPI access.plz give guidance about BAPI interface in enterprise portal.Hope u will understand the question and answer the query.
thanx in advance.
Regards:
Venkataramana.

Guys,
Herez how you call a BAPI:
     public void buildConnection(){
          try {
                    System.out.println("**** DI2 *****");
                 //      Add a connection pool to the specified system
                 //    The pool will be saved in the pool list to be used
                 //    from other threads by JCO.getClient(SID).
                 //    The pool must be explicitely removed by JCO.removeClientPool(SID)
                   com.sap.mw.jco.JCO.addClientPool( SID,         // Alias for this pool
                                         10,          // Max. number of connections
                                         "040",       // SAP client
                                         "USERNAME",   // userid
                                         "PASSWORD", // password
                                         "EN",        // language
                                         "IPADDRESS",// host name
                                         "40" );
                 //      Create a new repository
                 //    The repository caches the function and structure definitions
                 //    to be used for all calls to the system SID. The creation of
                 //    redundant instances cause performance and memory waste.
                   repository = com.sap.mw.jco.JCO.createRepository("MYRepository", SID);
                    JCO.Client client = null;
                    client = JCO.getClient(SID);
//                 Get a function template from the repository
                    //IFunctionTemplate ftemplate = repository.getFunctionTemplate("BAPI_CUSTOMER_GETDETAIL2");
                    IFunctionTemplate ftemplate = repository.getFunctionTemplate("YGGLB_BAPI_YGGLB9PRK_PRKDOCU");
//                 Create a function from the template
                    JCO.Function function = ftemplate.getFunction();
//                 Get import (of Function Module) "Parameter list"
                    JCO.ParameterList input = function.getImportParameterList();
//                 Set inputs for import parameters
                    //input.setValue("0000009000", "CUSTOMERNO");
                    //input.setValue("0248","COMPANYCODE");
//                 Get import (of Function Module) "Structure list".
                   //JCO.Structure importStructure = function.getImportParameterList().getStructure("CUSTOMERADDRESS");
                    JCO.Structure importStructure = function.getImportParameterList().getStructure("IM_DOCUMENTHEADER");
//                 Set values for import parameters (of Function Module) "Structure list"
                    importStructure.setValue( "SA", "DOC_TYPE" );
                    importStructure.setValue( "20080910", "PSTNG_DATE" );
                    importStructure.setValue( "20080910", "DOC_DATE");
                    importStructure.setValue( "BHARDWS", "USERNAME" );
                    importStructure.setValue( "2008", "FISC_YEAR" );
                    importStructure.setValue( "FRE1", "COMP_CODE" );
//                 Get import (of Function Module) "Table list - 1".
                    JCO.Table orderPartners = function.getTableParameterList().getTable("TBL_ACCOUNTGL");
//                 Set values for import parameters (of Function Module) "Table list - 1"
                    //Append Row -1
                    orderPartners.appendRow();
                   orderPartners.setValue("0000000001", "ITEMNO_ACC" );
                     orderPartners.setValue("0000400100", "GL_ACCOUNT" );
                    orderPartners.setValue("H", "DE_CRE_IND" );
                    orderPartners.setValue( "ANYTHING", "ITEM_TEXT" );
                    //orderPartners.setValue( "AG", "PROFIT_CTR" );
                    orderPartners.setValue( "AIG0000007", "COSTCENTER" );
                    //Append Row -2
                    orderPartners.appendRow();
                   orderPartners.setValue("0000000002", "ITEMNO_ACC" );
                    orderPartners.setValue("0000400100", "GL_ACCOUNT" );
                    orderPartners.setValue("S", "DE_CRE_IND" );
                    orderPartners.setValue( "NOTHING", "ITEM_TEXT" );
                    //orderPartners.setValue( "AG", "PROFIT_CTR" );
                    orderPartners.setValue( "AIG0000007", "COSTCENTER" );
//                 Get import (of Function Module) "Table list - 2".
                    JCO.Table orderItems = function.getTableParameterList().getTable("TBL_CURRENCYAMOUNT");
//                 Set values for import parameters (of Function Module) "Table list - 2"
                    //Append Row -1
                    orderItems.appendRow();
                   orderItems.setValue("0000000001", "ITEMNO_ACC" );
                    orderItems.setValue("USD", "CURRENCY" );
                    orderItems.setValue( "2000", "AMT_DOCCUR" );
                    //Append Row -2
                    orderItems.appendRow();
                   orderItems.setValue("0000000002", "ITEMNO_ACC" );
                    orderItems.setValue("USD", "CURRENCY" );
                    orderItems.setValue( "2000", "AMT_DOCCUR" );
//                 Execute client
                    client.execute(function);
//******************Start to work on fetching values now********************************
//                 Get export (of Function Module) "Structure list".
                    /*JCO.Structure returnStructure = function.getExportParameterList().getStructure("CUSTOMERADDRESS");
                    JCO.Structure returnStructure2 = function.getExportParameterList().getStructure("CUSTOMERGENERALDETAIL");
                    returnStructure.getString("NAME");
                    returnStructure2.getString("ENTERED_BY");*/
//                 Get export (of Function Module) "Table list"./// Create a new template if fetching table data from a different function module than above
                    //IFunctionTemplate ftemplateTable = repository.getFunctionTemplate("BAPI_CURRENCY_GETLIST");
                    //JCO.Function functionTable = ftemplateTable.getFunction();
                    //client.execute(functionTable);
                    JCO.Table table_return = function.getTableParameterList().getTable("RETURN");
                    Vector tbl = new Vector();
                    Vector row = new Vector();
                    Vector colNames = new Vector();
                    //Loop over all rows
                    do {
                    //Loop over all columns in the current row and add all those colums values to the current row
                    for (JCO.FieldIterator e = table_return.fields();
                         e.hasMoreElements();
                         JCO.Field field = e.nextField();
                         row.add(field.getString());
                         System.out.println(field.getName() + ":\t" + field.getString());
                         } // end for
                         //Add this newly built row to the table
                         tbl.add(row);
                         } while (table_return.nextRow());
                         table_return = null;
                         table_return = function.getTableParameterList().getTable("RETURN");
                         table_return.nextRow();
                         for (JCO.FieldIterator e = table_return.fields();
                         e.hasMoreElements();
                         JCO.Field field = e.nextField();
                         colNames.add(field.getName().toString());
                    //DefaultTableViewModel dtvModel = new DefaultTableViewModel(tbl, colNames);
                    //beanObj.setModel(dtvModel);
                         System.err.println("getting value for you from session in Get Data 1:-");
                         JCO.releaseClient(client);
                    //     return dtvModel;
               catch (JCO.Exception ex) {
                 System.out.println("Caught an exception: \n" + ex.getMessage());
               }catch (Exception e){
                    System.out.println("Final Message" + e.getMessage());

How do I access the AF Portal with SCR331 reader in Mac OS 10.5.6

I have searched every website known to man and I am unable to find a way to access the AF Portal using a CAC reader issued to me. It is an SCR331. It shows up just fine in Keychain Access and I am successful in adding a new identity for the website. But when I go to the website www.my.af.mil and hit the button to access using my CAC card, it says that I have hit the Cancel button.
Any ideas?

To All,
I encountered the same problems you describe with the Air Force portal. Followed all recommendations to no avail. After lots of trial and error this is what I did in my setup and worked:
1. close all open programs. Open keychain access, connect the reader, insert CAC, select CAC keychain by clicking on it once, you will see a list with 3 certificates and 3 private keys to the right.
2. double click on the certificates and find the one that shows "Usage Digital Signature, Non-Repudiation" and Purpose #1 Smartcard Logon, Purpose #2 Email Protection, Purpose #3 Client Authentication". This is the right certificate for online CAC authentication.
3. control-click the CAC certificate identified as the right one in step 2 and create an identity preference for each server addresses that the AF Portal has:
https://www.my.af.mil/EAI_JUNCTION/eai/
https://www.my.af.mil/EAI_JUNCTION/eai/auth
https://www.my.af.mil
I had to create an identity preference for each; for some reason if I don't use all three, login fails.
If you also want to access the virtual MPF, also create an identity preference with the following server: https://w20.afpc.randolph.af.mil/afpcsecurenet20/
Note that these server addresses are case-sensitive and you need to put the "/" just as I did above.
4. verify the identity preferences were created by selecting the login keychain, you should see them in there.
5. open safari and enter: https://www.my.af.mil in the safari address bar. Enter PIN number if requested. I have noticed that sometimes it will work flawlessly and sometimes the server will reject the certificate and ask you to select a different one. If I select the one that says DOD EMAIL CA-15 and hit enter (sometimes repeatedly) it will then work. Don't know why this happens but have read is a USAF server-side issue.
Once you are able to access the portal, logout and try the vMPF by entering https://w20.afpc.randolph.af.mil/afpcsecurenet20/ in the Safari address bar
hit OK if presented with a consent screen. You may be given a username/password screen, reenter https://w20.afpc.randolph.af.mil/afpcsecurenet20/ into the address and try again, you should be in AFPC secure.
I tested this in a 2008 white macbook with an OmniKey 3121 USB reader and an Oberthur ID One v5.2 CAC card. My OS is 10.5.6.
Please let me know if this helps.
R Burgos

How to access the webservice in portal component

hai
how to access the webservice in portal component.
anyone knows give the solution
Rds
Shanthakumar

Hai
Please check this link.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/connectivity&
Regards

How to access the portal database ?

Hi ,
1. How to access the portal database from an abstract portal component program ?
2. How to insert data to the Table from the abstract portal component program ?
Please provide me some direction to proceed .
plz send me the steps how to access the Database using SQL.
Thanks
Smita
Edited by: Smita Mohanty on Nov 14, 2008 9:21 AM

Hi Smita,
In case your portal has MS SQL server as its databse, then I am giving the step by step directions to achieve 90% of what you wish to do. Rest 10% you can try on your own.
Go through my article given below:
[How to Create a Web Service using Enterprise JavaBeans|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/b00917dc-ead4-2910-3ebb-b0a63e49ef10]
First go through pages 1-12 which will help you to create user/table in MS SQL database as well as create a data source in Visual Admin. Page 19 will give you the code which you can use in your Portal component to access the tables you have created in your SQL database.
I hope your problem gets solved.
Bye
Ankur

How to access survey and poll portal?

hi,
i got through the document and that say, this is the out of box facility. how can i make a portal link, by clicking that i can access the survey and poll facility?
please give me steps?
dhananjay

You have to add the "Sruvey builder" portlet to an existing page to allow for creation of survey's polls. During creation, you can choose a page to publish the survey to.
Otherwise, you can create a page and add the Survey FORM portlet to it. Then edit the portlet to display your created survey/poll.
See the portal admin guide for additional info.

How to accessing portal services

Hi All
         I am saravanan. i have doubts. Can u plz solve my doubts?.
1). How to Accessing Portal Services from a Webdynpro application?.
2). Portal Eventing with Webdynpro and other Applications?.
3). single signon from Webdynpro applications?.
     These are my doubts. Could u plz solve my problem.
If u have any material or PPT or PDF files kindly send my mail.
This is my mail id : [email protected]
Thanking You
Saravanan

Hi Swathi
I'm trying to do exactly the same, i have a webdynpro application and i'm trying to access KM libraries to get the full list of metadata properties. But i'm getting and error while trying to get the service on the following code:
Property propertyAux = null;
IResourceFactory resFactory = ResourceFactory.getInstance();
IRepositoryServiceFactory serFactory = resFactory.getServiceFactory();
IPropertyConfigurationService propConfigService = (IPropertyConfigurationService) serFactory.getService("PropertyConfigurationService");
IMetaNameListIterator i = propConfigService.getMetaModel().nameIterator();
     while (i.hasNext()) {
     IMetaName metaname = i.next();
     if ( metaname.getDocumentPatterns()!= null){
     propertyData.setId(metaname.getName());
     propertyData.setName(metaname.getLabel(locale));
     propertyData.setNamespace(metaname.getNamespace());
     propertyData.setDescription(metaname.getDescription(locale));
     propertyList.add(propertyData);
The error on the trace is this one:
System.err#sap.com/KmmsListEAR#System.err#Guest#2####30a27fa0cbfa11dbace30018de0545f1#SAPEngine_Application_Thread[impl:3]_29##0#0#Error##Plain###Configuration Framework error: unable to create an IConfigClientContext instance from an EP5 userInitialConfigException: The configuration service locator could not be initialized for any of the environments. The configuration framework is not available.#
System.err#sap.com/KmmsListEAR#System.err#Guest#2####30a27fa0cbfa11dbace30018de0545f1#SAPEngine_Application_Thread[impl:3]_29##0#0#Error##Plain###InitialConfigException: The configuration service locator could not be initialized for any of the environments. The configuration framework is not available.
Could you please give me a hand on this one?
Thanks in advance

How to access the User's login portal ID?

Hi all,
     How to access the user's portal login id??
   Thanks,
   Anirudh.

Hi
Try this
String loginuser="";
     try{
          IWDClientUser wdUser = WDClientUser.getCurrentUser();
          IUser user = wdUser.getSAPUser();
          if(user != null)
               IUserAccount acct[] = user.getUserAccounts();
               if(acct[0] != null)
                    loginuser = acct[0].getLogonUid();
                    strUserid = strUserid + acct[0].getLogonUid();
}catch(Exception e){
Kind Regards
Mukesh

How to access Portal URL outside of the LAN

Hi Experts,
Our J2EE engine is hosted on one machine and R/3 is installed on other machine (IP address is different). We have configured Web Dynpro ABAP iVIEW's and Transaction iViews in my portal. To be able to access these two iViews I have to maintain the IP addresses of both EP server and R/3 server IP's in every client host file.
Hence my client system is in LAN it is working with no issues, but we want to access the URL form out of LAN which is not possible at the moment.
Could anyone please advise me how to access the URL without maintaining the IP address in host file
and
able to access the URL out side of the LAN.
Thanks
Murthy

Hi Murthy,
Directly its not possible at all, For this you need to publish the Portal Server on Internet.
Once its published on internet then you can access the URL without maintaining the
IP address in host file.
In this your Basis Team and Network team will help you.
Regards,
Piyush

How to access to SSO username and password from JPDK

Hello
Does anybody know how to access, from Java PDK, to SSO username
and password of user, currently connected to portal.
Thank's,
Tomaz Podbersic

The portal user's password is one way hash algorithm (MD5) that
cannot be reversed.
What you'll have to do is setup a "External Application" and
save an alternate username/password profile in that area. It
requires the user to first enter that data (but only 1 time) the
first time into that application.
===========================================
<HELP NOTE>
If anyone knows of an API to populate those tables when seeding
or creating the user names to also seed or create the "external
applications" user /pass this would be helpful.
============================================
JSP java code:
====================
PortletRenderRequest portletRequest = (PortletRenderRequest)
request.getAttribute (HttpProvider.PORTLET_RENDER_REQUEST);
ProviderUser myUser=(ProviderUser) portletRequest.getUser();
=====================
From this object instance you can get the user's name, and other
Portal session info. NOT password.
The External Application username & password is a bit more
tricky to get.
see:
SQL Login Problems

Memory Problem on 790fx-gd70 - how to access DDR Voltage in BIOS?

I have been getting memory related problems on a 6 month old system. I could only boot from one stick of RAM (Corsair TW3X4G1333C9A) but even then system was not stable for gameplay or stability test though this stick did pass overnight memtest. I returned the board, cpu and memory for them to test. They diagnosed faulty RAM and replaced. Well it worked OK for 24 hours then I started getting BSOD "PFN_List_Corrupt" and "Memory_Management" crashes.
I tested the new sticks and one fails memtest after a few seconds with 2378 errors and the other, although it passes memtest with 20 passes, crashes out straight away on Prime95 Blend Test (i.e. the one that stresses RAM).
They suggested I enter DDR Voltage manually rather than relying on Auto but no matter what I seem to enable this option is greyed out. Does anyone know which settings need changing from defaults so I can get at the voltage section?
I have tried swapping around the dimms but they are all the same regardless so not a slot problem. Now of course, I don't see it as a RAM problem either unless I am the unluckiest person to keep getting bad sticks. So now I think maybe something on the board or CPU is causing damage to the RAM or at least causing it to mis-report. Could a fault in the memory controller be doing this and if so how can I test for this?
At my wit's end here. Hope someone has some ideas - either on how to access DDR Voltage in the BIOS or get to the cause of my problem.
Many thanks.

OK thanks for explaining a bit more . This power unit did get some very good reviews in the sub $100 from many sites and from these I thought it would suit my needs. I have arranged to try a friend's 650w next week.
I think I am maybe not being clear. I have had the system running OK for six months. I had had no need to test the ram and didn't bother with stability tests at that stage. I am not a gamer and use my machine more for video and graphics work. One thing I did notice from the start was the couple of games I do have on (Call of Duty and Fallout3) would give occasional freezes. I put it down to my now rather old hot GPU which I would get around to replacing in due course.
Now the real problems started recently when I got round to replacing the stock cooler with a Titan Fenrir. Trouble with this is it overhangs Dimm1 but in moving around the memory sticks I seem to have opened a real can of worms. I could only get it to boot from one of the sticks. This stick passed memtest but would crash out of prime95 and games would freeze within a couple of minutes.
Now, the retailers here in the UK told me to send back board, cpu and RAM. They tested all 3 but they only replaced the memory and as you can see from my first post the memory related problems have continued. The memory by the way is in Corsair's list as "100% tested compatibility". Is it possible that something about the CPU/Board that is damaging the RAM? If a stick is failing memtest (it failed another test too called Windiag) is that definitive? It is bad for sure or board/cpu misreporting? Am I right in thinking memtest86 does cannot distinguish faulty RAM from faulty memory controller? Is there a test I can do to check if the CPU alone is faulty?
I don't know if this means anything to you guys but when I ran the prime95 (Blend) recently with both sticks in it failed straight away on 2 cores but went on running on the other 2.
One of my other frustrations is I don't know anyone else with am3 board or memory so swap things around.
Any suggestions for pinning this down would be much appreciated. Just don't assume my knowledge is as great as yours . But I do learn. I never knew v x a=w for example. And I now know how to change DDR Voltage in the BIOS - I had been expecting a sub-menu where Auto was greyed out and in fact it was just sitting there waiting for me to press + and -. Very embarassing that I spent hours trying to change this when the instructions on what to do were right there in the help column!

How to access the global data in user exit.

Hi All,
How to access the global data in user exit.
the question is that when we were writing a code in the FM. i need to read data from the standard program like newly created documen and this document number need to be accessed in my program.
this document number is not imported to the FM i needed to access for frther proceed.
Thanks in advance.

Hi,
See the below PDF file by Jeff Goldstein. There you can find all the details about accessing data outside of the exit.
[SAP User Exits and the People Who Love Them|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8]
This will help you to solve your problem.
Regards
Karthik D
Edited by: Karthik D on Dec 2, 2008 4:18 PM

How to access Enter prise portal

Similar Messages

Maybe you are looking for