How to access source code for checked in .sca files in the dev environment

Hello,
I am trying to do some CRM E-commerce development. The basis personnel has checked in all the relevant SCA archives listed in the setup documentation. He has since given me the Servername and port for accessing the NWDI that I can set in the Development Environment. I can log on to the system and see the repository browser with all the branches.
For example:
CustomerConfig -> CRMEXT -> sap.com_SAP-CRMWEB -> dev -> active
CustomerConfig -> CRMEXT -> sap.com_SAP-CRMWEB -> dev -> inactive
How ever there is no code there to sync. Is there something missing in our setup for the NWDI so I can sync the CRM E commerce projects to the local system and modify them.
Is there anything we have to do either in NWDI or in the IDE to see the source code to extend it.
Thank You for your help in this matter.
Sumit.

Hey Pascal, Thanks for the help. We did a batch check in and the code did not go through. After we tried the check-in in the non-batch mode it worked.

Similar Messages

How to write a code for open new txt file in swing

hai all,
now i do one project in java.that project's GUI is Swing. But i don't known swing (basic).So how to write a code for open new txt file and "Open window " in menu item on swing.that means when i click the "New" on menu that time open a new txt file. open also like that type.
plz give me that code ! very urgent
Advance Thanks !
RSK

Swing Tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
Since you don't know the basic of swing read the tutorial, it is for your own good because it is useless if we provide you with a code you don't even understand and how it works.
If you want a menu read the tutorial about using menus and for opening a file read using JFileChooser.
note: don't use the word urgent because it implies that your problem is more important than others.

How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
   Paul

i get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First           : 0x4001c001
DLL Last            : 0x41c7c0d8
Physical First      : 0x84001000
Physical Last       : 0x863bbdec
Num Modules         :        294
RAM Start           : 0x863c0000
RAM Free            : 0x863d5000
RAM End             : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files           :        116
Kernel Flags        : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start   : 0x00000000
Driver Glob Length : 0x00000000
CPU                 :     0x01c2
MiscFlags           :     0x0002
Extensions          : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18    0x9     0x25    0x0     0x0     0x0
Row 1: 0x26    0xd     0x28    0x0     0x0     0x0
Row 2: 0x27    0x24    0x23    0x0     0x0     0x0
Row 3: 0x0     0x0     0x0     0x0     0x0     0x0
Row 4: 0x0     0x0     0x0     0x0     0x0
Row 5: 0x0     0x0     0x0     0x0     0x0     0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
        Height = 0x280
        Width = 0x1e0
        HSW = 0x20
        HFP = 0x8
        HBP = 0x17
        VSW = 0x1
        VFP = 0x4
        VBP = 0x3
        DVI is not enabled
        PixelClkDiv = 0x7
        LogClkDiv = 0x1
        ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed.

How obtain complete source code for applet demos?

I would like to obtain the source code for all the class files for the applet demos, especially the molecule viewer. Some of the class files do not have corresponding java files made available. Who can help me out?

Which class files are missing?
If you go to this site, select the applet of interest, the link at the bottom of the page (that is, the page with the running applet in it) takes you to the source. The file at that link includes all of the classes in the applet.
http://java.sun.com/j2se/1.4.2/docs/relnotes/demos.html
-John

How to get source code for commands like diff or cat

Hi all
I'm learning c programming and i'd like to read some code for the basic commands on the linux system
I remember apt has one such option that allows getting pakcage source code
is there a similar one for pacman ?
or do i have to search those source code myself ?
and also in BSD system all the codes are availeble in a code repository
thx

diff and cat. Or was that too literal?
Last edited by Ghost1227 (2009-04-18 23:57:55)

Library or any sort of source code for replacement of selcted frames in the video

for my video steganography application i have to replce the embedded frames with the orignal frames of the video i am using avi file library but it is not working it is giving exceptions ....so i need any other suggestions or help

This forum supports setup of the .NET Framework.
You appear to have a question about .avi file editing. Assuming you are developing a .NET application, this CodeProject article may be of some use to you:
http://www.codeproject.com/Articles/7388/A-Simple-C-Wrapper-for-the-AviFile-Library
For further help (assuming, again, that you are developing a .NET app), I suggest you ask here:
For VB:
http://social.msdn.microsoft.com/Forums/en-US/vbgeneral/threads
For C#:
http://social.msdn.microsoft.com/Forums/en-US/csharpgeneral/threads

How to include source code in web dynpro java deployment

Hi,
We dont have NWDI.
We are creating ear files out of web dynpro applications packaging them as sca files and deploying them in server.
But the source code is not included in ear.
How to include source code with your ear/sca , so that when anyone downloads the sca file later, they are build the Project in the studio.
How would they typically download? Do they require NWDI ,
Right now we dont have NWDI in place, but we want to do is parcel the applications such that the source code should be available at a later time for download.
This is possible with .par files , but what about web dynpro?
Thanks,
Deb

If you are not using NWDI use the _comp file.

Source Code for Asset Business Package

If anyone customized I would like to know how to get to the Java source code for Asset Business Package
Regards
Mike

Try the SCSL release:http://www.sun.com/software/communitysource/j2se/java2/download.xml

Where to find source code for PDK

for example, source code for AbstractPortalComponent.

Hi Han,
To get the source code of the PDK, first download the pdk either from SDN or portal from java developer> PDK download>jar files and save netweaverlib.zip.
Unzip it and you will find more jar file.
Now if you rename the .jar file to .zip and open you will find .class file. Use a decomplier to get the java classes. For abstract portal component rename and unzip prtapi.jar.
PS: If helpful award points
--Deepak

Is there any differnce between the Numeric Limit Test source code from TestStand 3.0 to TestStand 3.1? How to get the source code for the Numric Limit Test for both the versions?

I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
Jeyan

Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How to get full source code for Oracle ADF?

Hi,
I 'm referring to the following URL http://download-west.oracle.com/docs/html/B25947_01/intro003.htm and it has mentioned that full source for Oracle ADF is available :
"Full source for Oracle ADF is available to supported customers through Oracle Worldwide Support. The full source code for the framework can be an important tool to assisting you in diagnosing problems and in correctly extending the base framework functionality for your needs."
Does anyone know how to obtain such information from Oracle support? Is this from metalink

One possible snag in the process is that you will have some legal paperwork to sign. Depending on your company's policies, this could pose a problem.
Erik

How do I see the source code for 'NI Example Finder'?

At the LabView Express demo, the rep showed us how to view the source code for 'NI Example Finder' (started with Help, Find Examples...). Please refresh my memory.
--todd

There are a couple of VI's that shipped with LabView 7.0, but you can't see the diagrams.
C:\Program Files\National Instruments\LabVIEW 7.0\resource\system\HelpServer.llb\Run Example Finder__NATIONAL INSTRUMENTS.vi
Press Ctrl-E on this VI and it prompts you for a password.
This VI is run by C:\Program Files\National Instruments\LabVIEW 7.0\resource\system\HelpServer.llb\HelpServer__NATIONAL INSTRUMENTS.vi
There's also C:\Program Files\National Instruments\LabVIEW 7.0\help\_exfinder.llb\Example Finder Launcher.vi.
Tyring to open this VI starts the NI Example Finder. Note the taskbar icon which is different from the normal VI icon.
It seems like NI is trying to keep us out, even if it used LabView to develop the Example Finder.

How can I download the full source code for the Java 3D package

how can I download the full source code for javax.media.j3d
especially I need the Transform3D.java class.
thanks a lot
Meir

thank you guys I'll try to do so, I suggest you to
join me.From the one of the (ex-!)Java3D team:
"I'm glad to see that Sun has decided to officially support an
open source Java/OpenGL binding, JOGL. Perhaps they will
eventually decide to make Java 3D open source. However, be
careful what you wish for. The Java 3D source is huge and
complex. There are native sections for Solaris, Windows/OpenGL,
and Windows/Direct3D, plus common code. I don't know how you'd
open source a build process that requires different pieces of
the code be built on different machines running different
operating systems."
Sounds scary - I hope we're ready for it :)

How to get source code and build files for Eudora 7, and price?

Looking for source code and build/make files for Eudora 7 to port to Win7 and Ubuntu 14. Where is a source for this and what is the cost?

You best ask qualcomm. It is their intellectual property.
Eudora OSE was based on Thunderbird and the source code for the Penelope add-on is open source (that is what made Thunderbird over to OSE)

How to access source code for checked in .sca files in the dev environment

Similar Messages

Maybe you are looking for