How to activate sale order type in CFM1

Hi,
I want to include Sale order type in CFM1 transaction to restrict specific Sale order types along with Plant.Is there any report or Tcode which will enable this field or we can only achieve through exit.
Thanks
Venkadesh

Hello,
Please check BAdi CIF_INT_MODEL method MODIFY_OBJECT_LIST Modifying list of filter objects.
BAdI solution although it fulfills the general selection options.
Also refer consulting note 902968 - No user exit/BADI to influence selection in CFM1
Best Regards,
R.Brahankar

Similar Messages

How to exclude sales office for combination sales order type/division?

Hi experts,
I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

Hi
Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
Thanks
Indranil

How to configured pricing procedure to sales order type

Dear Sir,
Please tale me how to configure / change pricing procedure to sales order type. we have required to change pricing procedure from a to b for particular sales document type.
Regards
BK GAIKWAD

HI
Create a new document pricing pricedure
SPRO>sales & distribution>basic functions>Pricing>Pricing Control-->Define And Assign Pricing Procedures
and in the same path assign to your document
and assign it to your document and also then to your Pricing procedure determination in OVKK
regards
Prashanth
Edited by: Prashanth@SD on Jan 29, 2011 11:00 AM

How to fill conversion table TAUUM in BW for conversion of Sales Order Type

When importing sales order data from SAP ECC to SAP BI, conversion routine AUART can be used to convert Sales order Type from its internal representation to an external representation. (For example, the standard sales order has an internal Sales Document Type code TA, and an external code OR).
The standards SAP conversion routine AUART uses table TAUUM as a lookup table. This table has lots of data in SAP ECC, but it is empty in SAP BW.
How can we copy data from table TAUUM in ECC to table TAUUM in BW?
Do we have to create a maintenance view on the table, and type in the entries? Or is there a more automated way?

Hi Jay,
Make sure the extract structure is active. You can check the same from LBWE > 11: SD Sales BW> MC11VA0STI is active.
If the extract structure is active. Inorder to fill the setup table. First delete the setup table for the application area 11 from SBIW transaction. Then fill the set-up table for the application area 11 as you did for deliveries.
Then check whether data source is pulling data.
Let me know if there is an issue even after following the above steps.
Thanks & Regards,
Namrata

How to block sales order creating manually for a sales order type

Hi SD gurus,
My client wants for EDI orde type, the sales order should not be processed manually
how can i restrict this. I know to i can restrict this by not giving authorization
I want globally to maintain this.
thanks

Hi.
I think that the best way to do this is to create a field exit to data element AUART.
You will need an ABAP'er to create this field exit and associate the field exit to program SAPMV45A.
Doing this, you need create a customized table to maintain the sales order type permitted to manual creation.
You can use the program RSMODPRF to see all active field exits.
I believe that EDI orders in your process are created through BAPI, correct?
Waiting for response.
regards.

How to CIF Z Sales Order Type?

Dear Experts,
I am facing a huge problem.
All my Z order types are not being CIFed to APO.
Is there any extra configuration?
Do I need to code any BADI, Exit?
Thanks a lot in advance,
Thiago

I accidentaly removed Thiago's last reply.
Here it is:
Mr. Sai
One more question...
I have a custom delivery type that is generated by a custom sales order type.
Nor the custom sales order type neither the custom delivery type has individual requirements.
Anyway, I need to send the Custom Delivery to APO once I want to plan a shipment to it in TP/VS.
Debugging EXIT_SAPLCSLS_002 I can see the CT_DOC and CT_REQ (CT_DOCX and CT_REQX) filled with all my Sales Orders and Deliveries that have individual requirements.
Looking in the other structures available in this User-Exit we can find:
CT_DOC_CUS = Customer Enhancement Structure for CIF_SL_DOC
CT_REQ_CUS = Customer Enhancement Structure for CIF_SL_REQ
It is not clear enough what it would be the purpose of these structures.
My goal is to send that Custom Delivery Type to APO.
How should I implement this User-Exit?
What does need to be filled?
Should I have to fill CT_REQ?
Should I have to fill CT_REQ_CUS?
Should I have to fill CT_REQX?
Do you have any example of code?
Thanks!!

How to 'fix' an special procument key according to sales order type ?

Hi Gurus,
I need some help to solve an issue: how to "force" MRP to use a special procurement key (SOBLS) when the demand was originated by sales order type = "XYZ".
Limits:
- this is a MTO scenario, so MRP area is not an option (as far as I know)
- due to the huge quantity of materials we cannot consider create new materials.
Scenario:
1. 'Plant A' and 'Plant B' can produce material 'AAAA'
2. Only 'Plant A' is allowed to invoice.
3. Material 'AAAA' produced in 'Plant A' cannot be sold, they will be used as components to other materials.
4. Any external demand (sales) of material 'AAAA' must be handle by 'Plant B'.
In other words: If a sales document (order type 'XYZ') ordering 10 units of material 'AAAA' is posted, my MRP (on plant 'A') must undestand that a purchase requisition (stock transfer, special procurement key 'Z1') needs to be created. All other demands will create Planned Orders (to be converted to Production Orders).
I already tried to evaluate BADIS: MD_CHANGE_MRP_DATA, MD_ADD_ELEMENTS, MD_MODIFY_SOURCE, MD_PLDORD_CHANGE and MD_MRP_PARAMETERS ... with little success.
Any clue will be appreciated.
Regards,
Jone.

- "material AAAA" is a spare part and, also, an item BOM of "FG 1010"
Lets imagine that:
- "material AAAA" has MARC-BESKZ = 'E', MARC-SOBSL = '' and MARC-SBDKZ = '1' in both Plants,
- no stock is avaliable,
- there is a MTO Production Order of 'FG 1010' is demmanding 3 units of "material AAAA",
- there is a sales order (spare parts) is requesting 7 units of "material AAAA".
After a full MRP running (with RM61X-BANER=3), we would like to have:
Plant A:
Sales order segment 1 (MTO from 'FG 1010'):
- Planned order of 3 units
Sales order segment 2 (Spare parts sales Order):
- Purchase Requisition of 7 units.
Plant B:
Sales order segment 2 (Spare parts sales Order):
- Purchase Requisition of -7 units.
- Planned order of 7 units.
Sales org does the invoicing not the plant and you can set the delivering plant as plant B directly in the material master. But that's not feasible. Right now I would suggest you try creating (if they don't already exist) two special procurement keys first 40 and assign it in material master for plant A. Then other 52 assign it in item detail for the component in the BOM for the FG since it is MTO. For plant B not SPK is required from what you mentioned.
Edited by: Jeevan Sagar on Jan 11, 2012 3:49 PM

Sales order type creates a project. How do I change this?

When I create a certain sales order type, it prompts me to enter a network type and a standard wbs. I do not want this to happen. How do I change this? Can any one help me with this?
Edited by: Esi Ojior on Sep 1, 2011 2:02 PM

Hi,
Please check the incompletion procedure in VOV7 for your item category and go to OVA2 and navigate to the procedure under sales-item group. Mark those fields (WBS element, network) as warning / remove the fields.
But please make sure that this will impact all other item categories too which uses this incompletion procedure.
Regards,
P Gomatheeswaran

How to Block Customer from Sales Order Type

Hello Gurus!
I was wondering if there was a way to block a specific customer from a sales order type?
We have 4 Sales Organizations, and 2 of them use this customer, with different sales order type for each sales organization. So I only want to block this customer for 1 sales organization and a sales order type.....is this possible. If so, please advise!
I just want to block a customer from a sales order type.
Thank you for your time!
Best regards,
WC

Hi,
I have an wild idea just check it works or not--
Create a dummy customer pricing procedure.whenever u want to bleck a customer for any particular order type assign this dummy pricing procedure in customer master(Sales Tab).
Do not define any pricing procedure in SPRO against this customer pricing procedure
The moment user will try to process any order type (which u want to block for a customer), the system will not determine any pricing procedure & consequently it will not allow to save the order.
Hope it will solve the problem.
Regards
Sanjay

Disable Availability Check Based on Sales Order Type

Hi All SD experts,
Usually ( correct me if i'm wrong ) availability check is set via schedule lines item type. Is there any way that I can disable the availability check based solely on Sales Order Type ? Meaning no matter what item category or schedule lines assigned to materials, availability check will still be disable.
Besides setting in schedule lines type, what are others config that might trigger availability check ? MRP settings ? Movement type ?
Any valuable feedback will be great and much appreciated. A big thank you in advance.
Warmest Regards,
Edie

HI EDIE
    In order for the availability check to happen,the following configuration settings are required.
Availability check:
     a) you have to define requirement class & requirement type.
     b) you have to activate at scheduline category level
     c) in deleviry item.cat ,there is availability check off field,,,,, if u dont mention any values here,then system checks for availability.if u mention 'x' here,then system dont check for availability.
    d) you define checking group and checking rule ,these determine how availability check is going to be performed
MRP:
   MRP determines how material is planned,whether it is inhouse production or external procurement.MRP also determines the time taken for the material to become available for ready use.When ever an order is rised,the requirement is passed to MRP through transfer of requirements(TOR), here MRP determines the inhouse production time or external procurement time.
Movement Type: Movement type determines the type of material movement ,whether it is Goods Issue ,,, or ,, Goods Recipt,,,,, stock transfer between two plants etc.Movement type is determined in schedule line category level.
                  Award points if it is useful
                    Prasad.G

Question on Search Help and Authorization Check for Sales Order Type

Question 1:
When I go to VA01 and click the search help, it shows only order type that are not blocked.
However, when I have sales order type in select-options of a Z program,
S_AUART FOR VBAK-AUART
I click on the search help, it gives all the sales order types. How can I have a list with unblocked sales order type only?
Question 2:
I want to check whether a use can extract data from a sales order type (e.g. OR and RE)that he/she authorized to use.
I have include the following in my program:
AUTHORITY-CHECK OBJECT 'AUART'
ID 'AUART' FIELD 'OR'.
It always returns SY-SUBRC = 12.
But order type 'OR' is granted to the user (he/she can create order with type OR in VA01)
Please kindly give me some ideas, thanks.

hi,
ad1
use following code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR auart.
PERFORM auartGet.
FORM auartGet.
    CALL FUNCTION 'RV_HELP'
         EXPORTING
              KEY            = VKORG
              KEY2           = VTWEG
              KEY3           = SPART
              KEY4           = '0'
              NUMBER         = '008'
              FIELD_IN       = AUART
         IMPORTING
              FIELD          = AUART.
ENDFORM.
ad2.
example:
   AUTHORITY-CHECK OBJECT 'V_VBAK_AAT'
         ID 'AUART' FIELD 'OR'
         ID 'ACTVT' FIELD '01'. "01-create order, 02-change, 03 display
check sy-subrc eq 0.
regards,darek

How to stop sales orders from contracts from qualifying for Rebates.

We have set up rebate agreements for customers and they are working as expected.
Now our sales people want to start using contracts for some special deals for certain customers and products. But they DO NOT want these sales orders from these contracts to qualify for rebates.
Does anybody know how we can set this up or if it is at all possible?

Hi Zoya,
I got one more idea and so try it out.If it sounds foolish please ignore.Instead of going for userexits its better you go for a different sales order type whenever you refer to a contract.And make sure you assign a different pricing procedure which does not contain the condition type BO03 at all.Ofcourse this new sales document should have a different document pricing procedure.
Regars
Ravi Kiran

How to Activate a Condition Type in the Tax OCde for A/P -- Very Urgent

Hi Peers
I'm creating a new Tax Code in T.Code FTXP, while creating, One Condition Type is Deactivated, say JM01, How to activate that condition Type. I know how to activate the Condition Type in A/R side but I want to know it in A/P side. Plz help. Its very urgent.
Regards
Rajaram

Hi Rajaram,
U pls Check ur configuration. First u check the calculation procedure (F.A- Tax on sales & purchase-Basic setting-Check calculation procedure _ Define procedure) In the procedure field u check JM01 is activated or deactivated otherwise u created in condition Type.
I think its usefull otherwise u let me know
Thanks
R.Manigandan

Which is better Different Distribution channel or different sales order typ

Hi
My requirement can be met with three config options. Kindly go through these options and suggest which one is best and why
1. Keeping one distribution channel and different sales order types.
2. Configuring different distribution channel but single sales order type.
3. Configuring different distribution channel and different sales order types.
Kindly suggest
Regards
Gaurav Jain

Hi there,
Without telling what the requirement is how can we suggest you something?
All the below options are possible in SD. Depends on the scenario to choose which is the best 1.
Regards,
Sivanand

New Sales Order Type

Hello,
I would like to ask either it is neccessary to have a new division for new sales order type.
Thanks for your time.
Your fruitful answer will help me to move one step forward
Sherry.

Hi,
If you created new division then you have to maintain sales area
IMG >> enterprise structure >> assignment >> SD >> assign division to sales organization and set up sales area
How is it possible for the Y109 to be assigned to the new division. How to make it default
Y109 is not assigned to division rather it can be assigned to sales area
IMG >> sd >> sales >> sales documents >> sales document header >> assign sales area to sales document type >> Assign sales order types permitted for sales areas
Kapil

How to activate sale order type in CFM1

Similar Messages

Maybe you are looking for