How to add and configure a usb device driver in SRSS for Sunray?

Dear Sir,
If I want to use a usb device on Sunray 2 (the usb device is plugged into Sunray's usb port), and I have been developed a usb driver on Solaris 10. Can I install the same driver in SRSS host to active the usb device in Sunray? If it can, how do I configure SRSS and where is the location of SRSS drivers? Can I use add_drv similar command to add my driver to SRSS?
The second question is when I plug-in a usb device to Sunray, can I see device information (VID, PID, and so on) in any log file or by any command as "prtconf -v" on Solaris?
Thank you very much.
Best Regards,
Steven

What sort of USB device do you want to use ?
The peripherals chapter in the SRSS admin guide tells you how to use supported USB devices.
http://docs.sun.com/source/819-2384/dev.html
Drivers written for Solaris devices will not work with Sun Ray devices. If you want to write a device driver for Sun Ray, it is recommended you use libusb for a userland driver. See libusb notes on same chapter mentioned above.
There is currently no SRSS utility to list Sun Ray device parameters like prtconf does.
You could write a libusb application to do this, or use the test program described here:
http://libusb.sourceforge.net/doc/examples.html

Similar Messages

How to add and configure an additional hard drive.

I will like to know how to install and configure an additional hard drive. I will like to know how to configure the server so the services will start using this additional space. Intel based Xserver. late 2009.
Erik.

Your question is a little vague... "services will start using this additional space..."?
Let's see, where to start.
You don't say how many drives you currently have in your server. If all three drive bays are used then you'll probably need some kind of external array. There are many to choose from.
If you have a spare bay (or two) then you can buy a new drive bay (ADM - Apple Drive Module) (several online vendors still sell them), but you can't just put a bare drive into an empty bay since the blank trays lack the electrical connectors to support a drive.
Once you work out your drive options (internal vs. external, capacity, etc.) you can work out a plan to use them.
The specifics of that will depend on what services you're using. Are you web serving? file serving? home directory serving? or maybe mail? database? something else.
In general, once a drive is attached and initialized (via Disk Utility.app) it's up to you to configure the individual server components to use the space. That typically involves changing some kind of configuration parameter (e.g. httpd.conf for apache, /etc/my.cnf for MySQL, or various options in Server.app for other services) to tell them to use the new volume.
If you want to migrate the entire server to the new drive (e.g. the new drive is larger/faster) then you can clone your existing OS drive to the new drive and just reboot.
So, you see, there are many ways to do this. Everyone's situation will be a little different.

How to add and delete content on device from iTunes

I cannot find the way to add and delete content on my devices from the new iTunes. I don't understand why they changed the way it worked without any tutorials or hints at how to use the new iTunes app. I can see my device, I can see that music is on there, but I cannot unselect songs or content to get rid of it. Also, my apps do not show up on the apps list, I can see the screens with the apps on them and can delete them from that but the list is not working. I am using Yosemite and iTunes 12.01

If you select your device in iTunes then on the left-hand side of iTunes you should see a Settings heading with categories below it which you can use to select what to sync from your iTunes library to the device, and below that an On My Device heading with categories below it listing what is on the device.
For the Apps tab, the listbox of apps on my Mac's iTunes doesn't always populate until I've scrolled up/down the window. If yours doesn't populate then you have your apps downloaded and stored in your Mac's iTunes library - the listbox shows what you have in your computer iTunes library, if your library is empty then the listbox will remain empty.

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

Thanks alot, that helped me .....
what about option 43..i am using one wlc and the switch where wlac and APs are connected is playing the role of dhcp server used by APs as there is a dhcp pool configured. please advise. will the command be
option 43 hex (f104xxxxxxxxxxxx) f104 adding to it the management ip address of the wlac in hexadecimal.
if the ip address is 192.168.10.5 then the command will be
option 43 hex f104c0a80a05
please correct me if i am wrong!!!!

How to integrate and configure SMS API CC&B

Hi All,
Can you just guide me how to integrate and configure SMS API in CC&B.as per my knowledge sending email from ccb is possible but i was not able to find how SMS application can be implemented in CC&B.it very vital in my project to send SMS alert from CC&B to end users and also let me know can we customise and configure third party vendor SMS API in CC&B which was developed in various technologies or we have to develop our own SMS API for application
Thanks,
Srinivas Varadarajan

There is no built in application for SMS in CCB you need a third party application.
One of our partner company has a readymade add on module with complete GUI interface for CCB, this application allows you to define rules and conditions using standard select statements to filter receipent for SMS. This application can work with any service provider all you need is a SMS gateway. If you do not have a SMS gateway the same can be provided in certain countries.

How to install and configure nwportal7.3

HI
Can any one guide me how to install and configure nwportal, main objective of the configuration is i want to install ess and mss components,
for this what components i have to install in portal. can any one guide how to find the nwportal installation guide
regards
vredddy

I reported this to the moderators since clearly you didn't spend 5 minutes trying to search for the guides yourself. However, for some reason the moderators didn't agree with my report. Anyway, what operating system and database would the portal be running on? See the this link for a list of installation guides. When installing portal select at least AS, EP, EPC, BASIC and NW-MODEL usage types. After portal has been installed, you can start installing and configuring ESS and MSS. The next steps depend on your ERP release. Which is what? Include EHP level whether MSS Add-On or HR Renewal is installed (assuming pre EHP7). You might have to deploy business packages on your portal and you might have to activate business functions in your ERP system. Since there are so many variables, you won't find one guide that gives all the instructions. You will have to read the application help and blogs/documents/discussion threads on SCN for instructions.

SSDT-BI: How to add and deploy environment settings

Currently I deploy my SSIS projects via the wizard to several sql servers, on which I have to add and configure individually the environment and map it to the project parameter.
Am I right in that it is not possible to manage the environment definitions within the SSIS project and to deploy them together with the project to a target server, specifying via a deployment profile/wizard which environments shall be deployed?
If yes -> I vote for adding this feature. It would help me to keep (source controlled) track of environment definitions for Test/Prod environments. Additionally, deployment to further server instances would be much smoother.
If no -> Please give me a hint how I can get to that point.
Thanks a lot!

In SSIS 2012 if you use project deployment model you can do this programmatically.
see
http://www.sqltj.com/ssis-2012-t-sql-package-execution-with-dynamic-environment-parameter/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to add and hide more fields in PPM?

Hello,
Im new to this tool and I would like to know how to add and/or hide customized fields. I've only know that Its somewhere under SPRO > Global Enhancements to Project Elements but Im a little bit lost there. Can somebody explain to me with details how to do this and also, does this need a specific access of developer to do this customization?
As this is a basic need for all, anybody that is new on the tool and search for this will have a good reference on this thread.
Thanks in advance.
Many regards!

The path is SPRO > Global Enhancements to Project Elements > Setup field control.Herein,once you select the field control you may proceed towards defining the conditions that influence the same. A step by step approach is explained in the below article that will aid you to change properties of custom fields.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3053cee2-4bca-2d10-38ae-efff39ad248e
Regards,
Pradeepkumar Haragoldavar

I was updating my iPhone 5S, suddenly the screen went black and now it won't turn on. Plugged it into my computer and it said "USB Device not recognized..." HELP!!

I just went to update my iPhone 5S as it asked me to, and it got to the point with the apple logo on the screen and the black loading bar underneath, but then the screen went black and the phone now won't turn on? I went to plug it into my computer and it said "USB Device not recognised"..
PLEASE HELP ME! It's 1am here in england, I need to be up at 6am for work and won't be able to get up without an alarm... my only option is so stay awake!

Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to install and configure smtp on iis 7 on windows 7

how to install and configure smtp on iis 7 on windows 7?
Thanks!

Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

How to install and configure Eclipse???

Can any one guide me how to install and configure Eclipse to use it with jdk 1.5??

how to install eclipse?
you don't need to install eclipse just extract it to a specific path...
install j2se 1.5 then eclipse will automatically detect it...

How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

Hello,
We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
Can anyone please suggest me how to install and configure OSB.
Regards,
Anil

Hi
Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
Regards,
Mitja

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

How to install and configure management agents on Tru64 Cluster

We are busy rolling out the Oracle 10g Grid Control to our enterprise and one of our targets is a two-node Tru64 cluster with shared file systems, i.e., each node can see (read/write) the file systems concurrently. Trucluster software is responsible for the clustering management.
On node1 we have a set of databases each with its own dedicated listener; the same for node2. Each cluster managed service set has its own logical hostname. For example, we have on node1:
db1 (database)
listener-db1 (listener for db1)
node-db1 (logical hostname for db1 service)
Upon switchover or failover, the database and listener are brought up on node2 and we need to cater for this in our management agent configuration. I am trying to work out how we install and configure the management agents in such a configuration. Has anyone done this or does anyone know how to set up the agents suitably?
I have already installed the agent on one of the nodes - that worked fine, and I have even managed to start another agent up using the installed software home on the other node using "agentca -f"

You the Cluster type of configuration. It is documented in the install guide you have

How to add and configure a usb device driver in SRSS for Sunray?

Similar Messages

Maybe you are looking for