How to add the total batch quantity in the delivery line item

Hi ,
I have one reqirement.the delivery items are having the batch splits.
Any Specific function module to add the individual line item level batch qty and assign to line item quantity.
Please suggest me for this requirement.
Thanks,
Sri.

Hi,
   Please check the FM 'VB_BATCH_DETERMINATION' for batch splits.
Reward points if useful.
Regards,
Abhishek

Similar Messages

  • How To Get The Total Delivered Quantity of a Sales Order

    Hello All,
    I have a requirement of getting the total delivery quantity of the sales order .I have checked it in LIps table but I am getting partially delivered quantity for a schedule line item.Can any one tell me how to get the total delivered quantity.
    Regards,
    Pavani.

    Hi
    Check the Table:
    VBEP  - Sales Document: Schedule Line Data.
    Inside the table check the Quantity Fields.
    Regards,
    Sreeram

  • Schedule lines not covering  the total order Quantity

    We have an issue  with Schedule lines
    Order created on  19-02-201
    Material =M
    Requirement type =KSV
    Order Quantity =2500
    Delivered Quantity=1700
    Schedule Lines
    Date               Order quantity       Confirmed Quantity        Delivered  Quantity
    19-02-2010     801                                        0
    19-03-210       500                                        0
    16-04-2010      500                                    500                                       500
    14-05-2010      500                                    0
    15-06-2010     0                                        500                                        500
    15-06-2010      0                                        500                                        500
    18-06-2010      200                                   200                                         200
    Item  Status
               Processing Status
                                         Overall status=Completed
                                         Delivery Status= Fully Delivered
    1)Even though we have not delivered the total Order Quantity 2500,Delivery Staus is Fully Delivered Why?
    2)Why the system not created SCHEDULE LINES for the remaining Order Quantity  2500-1700=800

    Check if there are still requirements existing for this order on MD04.
    You might also want to check how the availabilty is carried out, whats the replinishment lead time - anything mentioned there. Generally if you take RLT into consideration - then the unfulfilled qty is shown at the end of RLT.
    Not too clear at this moment on the dates you have mentioned, bit hard to read.
    Am curious too, why this is happening.

  • How to add a Totals row in a dashboard

    Oracle Business Intelligence 11.1.1.6.4
    Hi there gurus,
    I would like to know how to add a totals row at the end of a pivot table within a dashboard. Notice that the column I need to sum up is a measure column and not a dimension one.
    Thank a lot.

    Alejandro Trejo wrote:
    Oracle Business Intelligence 11.1.1.6.4
    Hi there gurus,
    I would like to know how to add a totals row at the end of a pivot table within a dashboard. Notice that the column I need to sum up is a measure column and not a dimension one.
    Thank a lot.What do you mean? That's what you would always expect to aggregate. Click the sigma sign on the Rows section and it will sum up the measures column. If not, add the aggregation rule to the measure column. Otherwise, explain IN DETAIL what you did, don't assume that what you did was correct.

  • How to add sub total

    hi
    how to add sub total in SAP Script using subroutine

    SAPscripts How to calculate Totals and Subtotals
    I have some doubs in BDC and SMART FORMS.  I want to change the material number using the transaction code MM02 through BDC.
    In scripts and smartforms how to calculate totals and subtotals?
    To calculate totals and sub totals in sap scripts you have to use subroutines.
    Say if you have to add the unit price (KOMVD-KBERT) then in the main window whereever tat value is picked write this routine
    /: DEFINE &TOT_PRICE&
    /: PERFORM F_GET_PRICE IN PROGRAM <subroutine prog name> /:USING &KOMVD-KBERT& /:CHANGING &TOT_PRICE& /:ENDPERFORM
    Then write the variable where ever you want it to be printed (mostly it will be in footer window)
    Then create subroutine pool program and you have to write the code.
    FORM F_GET_PRICE tables int_cond structure itcsy
                                        outt_cond structure itcsy. data : value type kbert.
    statics   value1 type kbert.
    Read int_cond table index 1.
    value = int_cond-value.
    value1 = value1 + value.
    Read outt_cond table index 1.
    outt_cond-value = value1.
    Modify outt_cond index 1.
    ENDFORM.
    I have given a rough outline, please be aware of the variable conversions as Int_cond-value and outt_cond-value are characters.

  • How to add a code TestIfElse(10) to the Main method of the Program.cs class?

    How to add a code  TestIfElse(10) to the Main method of the Program.cs class?
    Here is my code and I have copied from the Wiley book for Microsoft certification page 14,
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    namespace ifelse_Statement
        class Program
            static void Main(string[] args);
            TestIfElse(10);
            public static void TestIfElse(int n);
            if(n < 10)
                     Console.WriteLine("n is less than 10");
             else if(n < 20)
                    Console.WriteLine("n is less than 20");
             else if(n < 30)
                Console. WriteLine("n is greater than or equal to 30");
    Here is the error list I am getting,
    Error 1      Method must have a return type        C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
    12 13
    switch_Statement
    Error 2
    Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
    12 24
    switch_Statement
    Error 3
    Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
    12 9
    ifelse_Statement
    Error 4
    Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
    12 20
    ifelse_Statement
    Error 5
    Invalid token 'if' in class, struct, or interface member declaration
    C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
    16 9
    ifelse_Statement
    Error 6
    Invalid token '10' in class, struct, or interface member declaration
    C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
    16 16
    ifelse_Statement
    Error 7
    Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
    16 16
    ifelse_Statement
    Error 8
    Invalid token '(' in class, struct, or interface member declaration
    C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
    18 35
    ifelse_Statement
    Error 9
    A namespace cannot directly contain members such as fields or methods
    C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
    20 10
    ifelse_Statement
    Error 10
    Type or namespace definition, or end-of-file expected
    C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
    30 1
    ifelse_Statement
    Error 11
    The type or namespace name 'n' could not be found (are you missing a using directive or an assembly reference?)
    c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
    16 12
    ifelse_Statement
    Error 12
    'System.Console.WriteLine(string, params object[])' is a 'method' but is used like a 'type'
    c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
    18 26
    ifelse_Statement

    static void Main(string[] args){
    TestIfElse(10);
    public static void TestIfElse(int n)
    if (n < 10)
    Console.WriteLine("n is less than 10");
    else if (n < 20)
    Console.WriteLine("n is less than 20");
    else if (n < 30)
    Console.WriteLine("n is greater than or equal to 30");
    Fouad Roumieh

  • How to add a SPACE as suffix to the last field in the downloaded text file?

    Hi Experts,
    By using GUI_DOWNLOAD am saving the data(only 3 fields) in a text file on my desk top.
    fine.
    example current record1 : 010001                      354.999            26.000
    here, after 3rd field 26.000, immediately the cursor is jumping to next line in text file.
    but, wanna a SINGLE SPACE after 26.000, say 26.000+space.
    tried with CONCATENATE, OFFSETTING, but no use(may b am using incorrectly)
    so, pls. suggect me, How to add a SPACE as suffix to the last field in the downloaded text file?
    thanq

    Sorry...Typo error...Too many in the last few days -:(
    Wanted to say AFTER -:)
    Do it like this...
    FIELD1 TYPE XXX,
    FIELD2 TYPE XXX,
    FIELD3 TYPE XXX,
    SPACE(1) TYPE C,
    That way you should end with...
    26.000+SPACE
    Greetings,
    Blag.

  • How to know the total page number of the standard report

    How to know the total page number of the standard report?
    If I insert a graph, a table, or text into the end of the standard report, how to know how much space is left for the current page?

    Hello Net,
    Unfortunately, we do not have any VIs in LabVIEW that can figure out the number of pages of a standard report. However, with the use of ActiveX calls you can achieve this task. Here are a couple of discussion forums which discuss this:
    Excel Page Numbering with ActiveX:
    http://forums.ni.com/ni/board/message?board.id=170​&message.id=194479&requireLogin=False
    Number Pages in Word Report:
    http://forums.ni.com/ni/board/message?board.id=170​&message.id=162972&requireLogin=False
    There is also great documentation on using ActiveX on msdn. You can search this document for page number objects. Here is a link to this:
     http://msdn2.microsoft.com/en-us/library/aa223048(​office.11).aspx
    Please refer to these links. If you still have questions please feel free to let us know so we can assist you.
    Thank you
    Best Regards,
    Dominic L.

  • How to add a location of face in the new Photo App?

    How to add a location of face in the new Photo App?

    You have to open a photo, right klick it and click "add a new face" or something like that.

  • How to get the total record count for the report

    Hi,
    How can I get count of the total records shown in the report. When we set the report attributes, we have an option "Set Pagination from X to Y of Z"
    Does anyone know how can I get the Z value from APEX variables.
    I know we can use that query and get the count but I just want to know how we can use APEX Variables effectively.
    Thanks in advance.

    You write a loop, something like this:
    Go_block('B1');
    If not form_success then
      Raise Form_Trigger_failure;
    End if;
    First_Record;
    If not form_success then
      Raise Form_Trigger_failure;
    End if;
    Loop
      If :system.record_status in('CHANGED','INSERT') then
        -- modify the record here--
      End if;
      Exit when :System.Last_Record = 'TRUE';
      Next_Record;
    End Loop;
    First_Record;But be very careful-- If your block can fetch a large number of rows, (over 100), this loop can take a long time, and you should not use this method. The loop will continue fetching more rows from the database until all rows satisfying the query are retrieved.

  • How to add byte[] array based Image to the SQL Server without using parameter

    how to add byte[] array based Image to the SQL Server without using parameter.I have a column in table with the type image in sql and i want to add image array to the sql image column like below:
    I want to add image (RESIM) to the procedur like shown above but sql accepts byte[] RESIMI like System.Drowing. I whant that  sql accepts byte [] array like sql  image type
    not using cmd.ParametersAdd() method
    here is Isle() method content

    SQL Server binary constants use a hexadecimal format:
    https://msdn.microsoft.com/en-us/library/ms179899.aspx
    You'll have to build that string from a byte array yourself:
    byte[] bytes = ...
    StringBuilder builder = new StringBuilder("0x", 2 + bytes.Length * 2);
    foreach (var b in bytes)
    builder.Append(b.ToString("X2"));
    string binhex = builder.ToString();
    That said, what you're trying to do - not using parameters - is the wrong thing to do. Not only it is insecure due to the risk of SQL injection but in the case of binary data is also inefficient since these hex strings are larger than the original byte[]
    data.

  • How to add a Quick Search Region of the shuttle

    JHeadstart 10.1.3.1.26
    Help me! Help me! Help me!
    How does add a Quick Search Region of the shuttle
    http://cid-857a1e2135747b0c.spaces.live.com/?_c11_PhotoAlbum_spaHandler=TWljcm9zb2Z0LlNwYWNlcy5XZWIuUGFydHMuUGhvdG9BbGJ1bS5GdWxsTW9kZUNvbnRyb2xsZXI%24&_c11_PhotoAlbum_spaFolderID=cns!857A1E2135747B0C!112&_c11_PhotoAlbum_startingImageIndex=&_c11_PhotoAlbum_commentsExpand=&_c11_PhotoAlbum_addCommentExpand=&_c11_PhotoAlbum_addCommentFocus=&_c=PhotoAlbum
    Message was edited by:
    user589457

    JHeadstart 10.1.3.1.26
    Help me! Help me! Help me!
    How does add a Quick Search Region of the shuttle
    http://cid-857a1e2135747b0c.spaces.live.com/?_c11_PhotoAlbum_spaHandler=TWljcm9zb2Z0LlNwYWNlcy5XZWIuUGFydHMuUGhvdG9BbGJ1bS5GdWxsTW9kZUNvbnRyb2xsZXI%24&_c11_PhotoAlbum_spaFolderID=cns!857A1E2135747B0C!112&_c11_PhotoAlbum_startingImageIndex=&_c11_PhotoAlbum_commentsExpand=&_c11_PhotoAlbum_addCommentExpand=&_c11_PhotoAlbum_addCommentFocus=&_c=PhotoAlbum
    Message was edited by:
    user589457

  • HT4356 My printer, Epson Stylus Office TX600FW, is not listed on the AirPrint. How to add it? Would Apple expand the list?

    My printer, Epson Stylus Office TX600FW, is not listed on the AirPrint. I can't find it on my iPad or iPhone. How to add it? Would Apple expand the list?

    Only the printer manufacturer can make it compatible with AirPrint, it's not up to Apple. You could try Epson's iPrint app, that claims to support that model :
    http://itunes.apple.com/us/app/epson-iprint/id326876192?mt=8

  • How to add DRAM FIFO-128bi​t to the FPGA project?

    How do I add the DRAM FIFO - 128 Bit Memory Interface to a PXIe-796XR RIO module?
    Above project is from one of the example projects. I know how to add DRAM but not how to configure it as FIFO 128bit as above.
    Any guidance is appreciated.
    Solved!
    Go to Solution.

    I really have not found a way to add the DRAM 128bit fifo to the design. Adding normal DRAM and target specific FIFO's and host-target FIFO's is easy, but the special DRAM implemented as a giant FIFO I could not find how to add. And I have searched the documentation - but obviously missed the key point. I use labVIEW 2013. Any hints are appreciated.

  • How to Add a correspondence type and tick the parameter(FI Down Payment)

    Hi All,
    To use the Down-Payments functionality of SAP for customer payments. Part of the process will be to print off a request for the customer to pay based on data that is entered into transaction F-37 (Down-Payment Request).
    I have created a new sapscripts for the Down-Payment Request. We will need a new correspondence type creating for this print. For ZFI006 to show anything the u201CNoted Itemsu201D must be ticked when printed in ZFI006 using correspondence ZAP11.
    Kindly advice me how to add a new correspondence type and the u201CNoted Itemsu201D must be ticked?
    Thanks.

    Hi,
    You cannot define a payment type as that is based on a lookup defined under the navigation Setup>lookup>Payables.
    This look up access level is System whihc implies it does not allow user level values to be defined.
    So you have to use the available payment types,
    Thanks
    Manish Jain.

Maybe you are looking for