How to allow user chaning his password in OBIEE 11g weblogic custom LDAP?

Hi,
How to allow user chaning his password in OBIEE 11g weblogic custom LDAP?
I need to give user an option to do so, without the intervention of any Administrator. I also do not want to make user a Administrator else he will be able to login in weblogic and can do any damages unknowingly.....
Regards,
Rahul

Hi,
Replace the line in the instantconfig.xml
<WebMessage name=”kmsgChangePasswordLink”><!–<HTML><sawm:messageRef name=”kmsgUIChangePassword”/></HTML>–></WebMessage>
with
<WebMessage name=”kmsgChangePasswordLink”><HTML><sawm:messageRef name=”kmsgUIChangePassword”/></HTML></WebMessage>

Similar Messages

How to allow users to change password

I have enabled users to change their passwords in the Server.app for the Default Site with SSL, and who can access is a group of individuals.
When I load up the Server site, I am presented with
a Login to which I then add my username and password and I am then presented with
Welcome to OS X Server
OS X Server makes it easier than ever for the people in your organization to collaborate, communicate, and share information.
I Choose My Settings and the site is redirected to /changepassword of which a page comes
Forbidden
You don't have permission to access /auth/ on this server.
The Directory /Library/Server/Web/Data/Sites/Default/auth/ exists with the corret permissions. This is an empty directoy tho
Apache Logs:
Directory index forbidden by Options directive: /Library/Server/Web/Data/Sites/Default/auth/
I cannot get this to work. WIki's are turned on but that doesnt work either.
If I Launch /wiki, I am prompted to login, to with I do, and i just get a blank web page
Apache logs:
File does not exist: /Library/Server/Web/Data/Sites/Default/__collabd
This is on a new install of OSX server
Any Suggestions?

Hi,
On the landing page at the bottom it should say "change password".
That brings you to a forbidden page?
On my server I do not have the /auth/ folder in my default site, but my changepassword page does work.
Can you check if going to https://127.0.0.1/changepassword does work? It will give an SSL error.
Then it might be DNS related conflicting with another router/server in your network
Or... charge $ 5 per user to change his or her password personally
Goodluck!
Jeffrey
StarPine Support

How to pass user name and password in openConnection method ?

Hi, Exports,
          I am trying to post data from applet to another application which is
          protected by network password.
          How to pass user name and password when I use openConnection method? In java
          doc, this method looks like do not accept these two parameters.
          Thanks
          ----- my code in applet ---------
          URL url = new URL("http://127.0.0.1/xml/index.cfm");
          URLConnection connection = url.openConnection();
          connection.setDoInput(true);
          connection.setDoOutput(true);
          connection.setUseCaches(false);
          connection.setAllowUserInteraction(false);
          DataOutputStream dos = new DataOutputStream(connection.getOutputStream());
          dos.writeBytes("POST " + path + " HTTP/1.0\r\n");
          dos.writeBytes("Referer: http://127.0.0.1/XML/index.cfm\r\n");
          dos.writeBytes("Content-Type:
          multipart/form-data;boundary=---------------------------7d0b414b04\r\n");
          dos.writeBytes("Host: "+host+":"+port+"\r\n");
          dos.writeBytes("Content-Length:" + buff.length()+"\r\n");
          dos.writeBytes("Connection: Keep-Alive\r\n\n");
          dos.writeBytes("-----------------------------7d0b414b04\r\nContent-Dispositi
          on: form-data;name=\"xmlDoc\"\r\n\r\n");
          dos.writeBytes(buff.toString());
          dos.writeBytes("\r\n-----------------------------7d0b414b04--\r\n");
          dos.close();


you need to negotiate Authentication in ur applet code...
          For example:
          If u r using Form based auth u need to send Post a request with j_user_name &
          j_password to the action j_security_check. and when server returns back the
          cookie
          u need to hold it and pass that cookie to the each and every request made to the
          protected application.
          Basically u need to imitate the browser.
          regards
          aseem
          David wrote:
          > Hi, Exports,
          >
          > I am trying to post data from applet to another application which is
          > protected by network password.
          > How to pass user name and password when I use openConnection method? In java
          > doc, this method looks like do not accept these two parameters.
          >
          > Thanks
          >
          > ----- my code in applet ---------
          > URL url = new URL("http://127.0.0.1/xml/index.cfm");
          > URLConnection connection = url.openConnection();
          > connection.setDoInput(true);
          > connection.setDoOutput(true);
          > connection.setUseCaches(false);
          > connection.setAllowUserInteraction(false);
          > DataOutputStream dos = new DataOutputStream(connection.getOutputStream());
          > dos.writeBytes("POST " + path + " HTTP/1.0\r\n");
          > dos.writeBytes("Referer: http://127.0.0.1/XML/index.cfm\r\n");
          > dos.writeBytes("Content-Type:
          > multipart/form-data;boundary=---------------------------7d0b414b04\r\n");
          > dos.writeBytes("Host: "+host+":"+port+"\r\n");
          > dos.writeBytes("Content-Length:" + buff.length()+"\r\n");
          > dos.writeBytes("Connection: Keep-Alive\r\n\n");
          > dos.writeBytes("-----------------------------7d0b414b04\r\nContent-Dispositi
          > on: form-data;name=\"xmlDoc\"\r\n\r\n");
          > dos.writeBytes(buff.toString());
          > dos.writeBytes("\r\n-----------------------------7d0b414b04--\r\n");
          > dos.close();
          >
          > ------------------------------------------

How to allow user print their draft anwsers before sending it as final ?

How to allow user print their draft anwsers before sending it as final in a form central questionnaire ?

Hey MTdev,
Panel close? events cannot be triggered on a VI being viewed or controlled remotely. Some more information on that can be found in the help here:http://zone.ni.com/reference/en-XX/help/371361E-01/lvprop/vi_panel_closeq/. My suggestion would be to set the Title Bar on the front panel of your remote VI to not be visible so that their only option for closing the window is to click the logout button. Are you using Remote Front Panels(http://zone.ni.com/devzone/cda/tut/p/id/3277) to do this instrument control? Using remote front panels allows you to manage a lot of the multiple people accesssing at the same-time type issues so it may be something to look into if you are not already using this method.
Regards,
Kevin
Product Support Engineer
National Instruments

How to validate user name and password in webdynpro.

Dear All,
Actually i have created login name and password in view, webdynpro and want to validate the user name and password but i am not finding proper code to how to validate user name and password.
Pl do the needful help.
Regards.
Tazeer.
Moderator Message: There is a seperate forum for WebDynpro. Please ask your question there.
Edited by: kishan P on Oct 5, 2010 1:08 PM

Hello, I don´t get you question. User authentication is ready out of the box in webdypro...
Regards Otto

How to enable users change password in obiee 11g?

Is there anyone know how to enable users change password in obiee 11g?
And I have tried the method in obiee 10g, bu it didn't work.
Any help would be appreciate.

As per I understand your requirement,
In your Dashboard create a Presentation variable which receives the value of year you select.
Now in your analysis, select the year column along with all the measures you want (Actual, plan, Forecast, and what-if, etc).
Create a filter on Year column and convert it into SQL. Put the condition as:
"Year" BETWEEN @{Presentaion_Variable} - 1 AND @{Presentation_Variable}
You will get the result for selected year and the previous year.
Hope it helps..
Regards,
A.K.

Do u know how to prompt user to enter password and validate the password?

hi all,anyone knows how to prompt user to enter password and validate the password as well?I do not need the GUI.Can someone post the codes here?Thanks!

hi all,anyone knows how to prompt user to enter
password and validate the password as well?I do not
need the GUI.Can someone post the codes here?Thanks!Codes are
BufferedReader
System.in
if
else
System.out.

How to suffix user name and password remote pc in shutdown /s command

Hi,
We can shutdown a remote pc using " shutdown /s /m \\ipaddress " command, only if password of remote pc is stored in windows credential manager.
But how to add user name and password when i execute the command for example : when we map a share folder on our pc we use below command with user name and password
"net use * \\ipaddress\share password /user:username "
can we give user name and password of remote pc while we give shutdown command to turn off a remote pc (without adding user name and password to windows credentials).
Thanks in advance..........

Hello Jayanth kundar,
Based on my test, I can use the command shutdown /s /m \\10.157.21.77 to shutdown the remote computer when the have the same username and password.
Do you mean that you want to add user name and password when you want to shutdown the remote computer?
I can't find a user name and password in Windows Credential Manager, please share us a screenshot.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Anybody knows that how to Allowing user Customization at runtime for portle

Anybody knows that how to Allowing user Customization at runtime for portlet.
What i want is to let user Customization persist to the repository. (not session). bu tmy testing accodring the Jdev 11g guide shows not working for portlet..
Any body knows how to do this for portlet ? Web center 11g
thanks a lot.
Wayne

Hi Wayne,
You can only save runtime customizations to the repository for the users present in jazn-data.xml file (If you are using file based security).
You will have to do the following before you can start saving user customizations:
1. Create Webcenter Template project.
2. Apply ADF Security
3. Use page-definition files for jspx pages.
After this, whatever customizations you do, will be saved to persistence storage.
Better would be to try this on server. Since, before deploying, you run the pre-deployment tool, which will take the MDS Repository path as an input and store all persistence storage there.
If there is nothing in that location, you can be sure something is wrong and debug it.
Hope that was helpful.
Regards,
Kunal Chheda.

Allowing multiple users to receive Ibot in OBIEE-11g

Allowing multiple users to receive Ibot in OBIEE-11g with out specifying email addresses.
How to use S A System subject area in OBIEE-11g
How to specify condition in Ibot of OBIEE-11G

RAGHAVENDRA HARI N wrote:
Allowing multiple users to receive Ibot in OBIEE-11g with out specifying email addresses.
How to use S A System subject area in OBIEE-11g
How to specify condition in Ibot of OBIEE-11GYou can use the SA System subject area after you set it up by following the documentation link provided below. It could be used in OBIEE Delivers which enables contact information, such as e-mail addresses to be retrieved from a database and used as delivery devices in Delivers instead of having the user's manually setup their own delivery device.
Here is the link to the documentation on how to setup SA system subject area in OBIEE 11g:
http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/sa_system.htm
You can set the condition in the condition tab which is the 3rd one I suppose.

How to create users and groups using WLST Offline with Weblogic 8.1.4

How to create users and groups using WLST Offline with Weblogic 8.1.4?
Any ideas?

Hi this is how i created a user using WLST Offline?
cd('/Security/' + domainName)
# Delete the default user name weblogic
# incase you want to remove the defualt user weblogic
delete('weblogic','User')
# Creating a new user defined
create(userName, 'User')
# Setting the password of the user you created.
cd ('/Security/' + domainName + '/User/' + userName)
cmo.setPassword(password)
Regards
Makenzo

Other user can't access to OBIEE 11G installed on a server

Hello,
We have installed OBIEE 11G on a server ( windows sever 2008 r2) with admin account, and it works fine, But others users can't access to obiee 11g ( administration icons are white in their sessions) even they have admin rights.
Can anyone tell me what should we do??
Thank you.

Hi,
This is the exact format how my tnsnames.ora file looks. sorry, I can ping it in command prompt now. In my connection pool i tried first DSN = ab.bc.xy.zx, did not work. Then I saw oracle's default repository and changed my DSN to your suggested format starting from "DESCRPTION" to rest. Still no luck Do you think, i should put the same TNS in my local machine??
ab.bc.xy.zx =
(DESCRIPTION =
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.110)(PORT = 1521))
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.120)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.130)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SID = cap2)
thanks,
BK.

How to update the default date format in OBIEE 11G.

Hi All,
How to change the default date format in OBIEE 11g from the MM/DD to DD/MM. Could anyone please help me out ASAP?
Thanks,
Arpan

Hi Arpan
OBIEE 11g is having " localedefinitions.xml " file at this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display
in my case i installed at C:\Oracle\MIddleware.
so
1- Stop BI Server from EM
2- Navigate to this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display. in your case oracle home will be different
3- take a backup of this file localedefinitions.xml "
4- modify it and save
5- bring BI Server up.
Regards
sher

How to generate a notification when a user changes his password?

Hi all,
I have OIM 11.1.1.5.0 BP02 installed. When an administrator resets a user's password, the following email is sent to the user:
Password has been reset for user <Firstname> <Lastname> . You will be required to change your password on next login.
First Name: <Firstname>
Last Name: <Lastname>
Password: passW0rd
+For any issues, please contact [admin email or phone]+
My requirement is to generate a similar email when a user changes his/her own password. How would I go about doing this?
Thanks in advance.

You can use an event handler for this.
Write your own code as a plugin for the event handler (refer to the developers guide for details on event handlers) then you can reference this from your custom event handler XML configuration with operation "CHANGE_PASSWORD"
e.g.
<action-handler class="<CLASS NAME>" entity-type="User" operation="CHANGE_PASSWORD" name="<EVENT HANDLER NAME>" stage="postprocess" sync="TRUE" order="2000" />
The action "RESET_PASSWORD" is also available for administrator change.

How to allow user to change SAP Portal password by themselves

We would like to allow user to change SAP Portal password by themselves. However, I added role Manage_My_Password and Manage_My_Profile to a user account. After logoned with this user account and opened the option 'Personalize'. I only find the page allow me to customize the page layout. But I haven't find tab for changing profile and password.
Pls advise.
Thanks.
Edward

Hi Edwar,
You can hide the pages from portal personalization workset. copy the workset and select the page and click on property -> select Invisible in Navigation Areas ->yes
You can find the workset under
Portal content->End user content->Standard Portal Users>Workset->Portal Personalization
If you want a custom developed application fro change password see the below blog
A Change Password Application
Hope it helps
Regards
Santosh

How to allow user chaning his password in OBIEE 11g weblogic custom LDAP?

Similar Messages

Maybe you are looking for