How to analyze routine in SD (VOFM)

Hi,
how to find out why a SD routine is developed and what its doing?
I'm preparing some specs and need this info.
all i knew is 5 routines RV60B900, RV60C900, RV45C900, RV45C911, RV45C912 have been developed......
I don't have knowledge on the SD routines. so pls help me in this.
thanks and regards,
Ravi.
poitns guaranteed!

Most probably these are copy control routines.
Copy controls routines are used when we create a document with ref to another. Code in these copy routines decide what values to copy from source document to target document.
For example if you are creating a delivery from sales order then one of these copy control routine will be invoked and which in turn will copy the values from sales order into your delivery.
Often customer defne their own copy control routines based on their requirement. After new copy control routine is defined in VOFM, it is then configured in SPRO. Where you can defined to use your custom copy control routine instead of sap standard one.
These copy routines can be defined for various document e.g. sales order, deliveries , billing doc.
Respectively they are configured in SPRO..
Just to give you an example for sales order you can configure in spro at following path
Sales and Distribution->Sales->Sales Document->Maintain Copy control for Sales Document.

Similar Messages

How to call routine and pass data to routine in vofm

Hi Experts,
I need to update KBETR and KWERT values present in 'Conditions Tab' in Purchase Order (ME21N/ME22N).
I have created a new customer tab in which we enter amount field and percentage filed. When user enters some value in this and clicks on 'Conditions Tab', calculation has to be done and the calculated value has to be appeared across a specific condition type.as i am new to abap i dont know how to create routine and pass data to routine in vofm from customised tab in me21n .
Thank's in advance

Hello Rajendra,
You can get plenty of forums in SCN related to it. Follow below steps to create VOFM routine.
Go to VOFM Transaction Code
1. On the Menu Select required Application i.e Pricing
2. Enter any Number in between 600 to 999 for Custom Developments.
3. On entering Pop Screen appears ask for Access Key(We have to remember that Every New Routine needs an Access Key)
4. Once the Access Key is received we can do modification.
5. Enter the Routine Number ,description and insert the Access Key
6. Now the ABAP Editor will open and required code can be copied from Standard SAP Routine and Custom Code Can be developed.
7. Once the coding is completed we have to Activate the Routine
8. Select the Routine and Go to Edit – Activate
9. Ensure that Active check box is ticked upon Activation of the Routine.
10. Double click on the routine will enter into ABAP Editor, we have to generate the Routine
11. Go to Program and select Generate
12.A screen pops up with the related Main Programs and select all required main programs wherever the Routine is being called.
13. Once the Routine is Generated and Activated, We need to configure the Routine in the config.
** Important SAP note: 156230.
Check the below document too.
http://www.scribd.com/doc/35056841/How-to-create-Requirement-Routines
Regards,
Thanga

How to analyze statspack report

Is there any book I can read to understand how to deal with the sp report ?
I know how to read part of it ,
what I need is something that guide what I can do when I see that wait event X is too high.
for exmaple , if dc_constraints is too high , what do I have to change ?
not only that , I have to analyze the rest of the report , I see how can we improve performance .
Thanks .

Hi,
how to analyze the reportWell, I have my notes here:
http://www.dba-oracle.com/t_reading_statspack_report.htm
Also, you can paste-in a STATSPACK report into http://www.statspackanalyzer.com and learn how to analyse a STATSPACK report.
There are several Oracle Press books on STATSPACK, you may find useful:
http://www.amazon.com/Oracle9i-High-Performance-Tuning-STATSPACK-Burleson/dp/007222360X
Hope this helps. . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference":
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm

How to analyzer the BI query in VISUAL COMPOSER?

hi experts,
could you please explain me how to analyze the Bex query in VISUAL COMPOSER? could you please provide me the step-by-step documentation if possible??
regards
vadlamudi

Hi Vadlamudi,
Here is some documentation for using BI Queries in VC:
[Modeling Composite Views Using BI Data Services|http://help.sap.com/saphelp_nwce10/helpdata/en/46/081ed5f8685875e10000000a11466f/frameset.htm]
[Maintaining BI System Connections|http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm]
I hope it helps,
Regards,
Udi

How to analyze full database

Hi all,
Can we analyze full database, if yes How to analyze full database and what is the command for that
Thanks & Regards
Venu

Venu,
My recommendation to you is that collect statistics for the schemas which are required. Using dbms_stats.gather_schema_stats. Also, collect system statistics to boos cbo to get produce more optimized execution plans.
Leave apart sys (dictionary table) statistics.
Read oracle performance tuning guide for more on how to collect system stastitics and pros and cons of it, try to do it on test or uat env. first, before going on production.
jaffar

How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents

Dear
Experts, I have a very exciting demand, the board of a customer.
I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
I ask, what is the standard solution that is used in these cases?
Thank you
Miki

Dear
Experts, I have a very exciting demand, the board of a customer.
I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
I ask, what is the standard solution that is used in these cases?
Thank you
Miki

Mac book pro has become very slow. How to analyze this and resolve this?

My mac book pro has become very slow. How to analyze and resolve this?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How to analyze sql query?

Hi,
can i analyze the performance of my sql query?
How to analyze my sql queries performance?
How to write optimal query?
Thanks & Regards

can i analyze the performance of my sql query? Yes!
How to analyze my sql queries performance?With a stopwatch. Or a trace, or SET TIMING ON.
How to write optimal query?Have a look at this post:
When your query takes too long ...

How redetermine Partners in Copy controls (VOFM Routines) ?

Hi All,
I have a requirement.
In all Sales to Sales copy control (all documents included) we need to redetermine Partner data from Customer Master on the creation date of new sales order. Basically partner data will not be copied from Old referenced document (except for sold to party)
please reply .
Thanks
Revanth

Hello,
you could use some own data transfer routines ( in VOFM -> data tansfer -> orders).
In standard there are the routines 1 (Partners Header) and 2 (Partners Item), which you could copy
into the customer namespace and adjust to your requirements.
In the customing of the copy control you only maintain the number of
your data transfer routine on header and /or on Item level.
Regards Wolfgang

Routine development in vofm

in tcode VOFM goto in formula -->cond value --> u can find some rouitnes there is a routine 356 .i want to create another routine 956 , 955, after wrintg the code when i am going to activate it is giving a synatctical erorr that specify the report name.how can i solve it? how cna i get the report name coz 356 & 355 is a include prog.
plz help

Can you activate the VOFM after the u getting the error, becasue its the include prog.
The procedure to create the new VOFM.
1.     Go to VOFM transaction
2.     Page down until you find a new spot on the page to put in the VOFM number and description.
3.     Put in the VOFM number and the description of the VOFM.
4.     Now the VERY IMPORTANT part of the process. Double click on the VOFM description not the VOFM number to create this as a Development/Correction and not as a repair. If you double click on the number then this copies some existing code and prompts you for a repair.
5.     Activate and generate the VOFM routine. Note: Configuration must be setup by the OM team for this step.

Enable and Disable Pricing Condition Type thru Routine in Tcode: VOFM

Hi
I have a scenario while creating a new sales order using Tcode: VA01. The conditions at line item are as follows:
Condition Type----Amount----Condition Value
ZBR5--4.000%----0.66
ZBS1--8.000%----1.31
Now the above case, my requirement is Condition Type ZBS1 should be displayed or calculated only when first condition type i.e. ZBR5 has amount more than 8.000%.
In case it is less than 8.000%, the Condition Type ZBS1 should be ZERO or (would be better if not displayed).
What i have tried till now is, created a new Routine in VOFM but after creating a new routine, i am unable to check the Amount fo Condition Type ZBR5 at runtime, as the Internal Table : XKOMV holds the details of Header data only, whereas my requirement is of Conditions at Line Item.
Inputs on this will be helpful.
Regards
Masoom
Edited by: Masoom_Infosys on Oct 3, 2011 2:24 PM

Hi Naimesh
Apology, i missed this point. I have alredy tried what you have suggested. I made a Condition Value and change value of XKWERT. The output of this change was:
Condition Type----Amount----Condition Value
ZBR5--4.000%----0.66
ZBS1--8.000%----0.00
If you observe above, the Condition Value is ZERO but the Amount remains as it is , that is 8.000%. In the code, i have tried to change the value of XKOMV-KBETR to 0.00, but still the output remains as:
Condition Type----Amount----Condition Value
ZBR5--4.000%----0.66
ZBS1--8.000%----0.00
Could you suggest some other way so that the output becomes:
Condition Type----Amount----Condition Value
ZBR5--4.000%----0.66
ZBS1--0.000%----0.00
Regards
Masoom

How to Debug routine in Infopackge

Hi All,
I have an ABAP routine in the Infopackage. How can I debug the code.
Thanks.
Regards,
bw_newbie

Hi,
See here:
debug abap routine in infopackage
debug the code at infopackage level
Hope this helps...

How debug a routine created in InfoPackage for Data selection ?

Hi everybody,
I decide to debug a routine create in InfoPackage.
Here, the name of my ABAP routine:
program conversion_routine
form compute_TREATMENT_DATE
When i execute the "/h" command to launch debugger, i don't see this routine in Call Stack...
How i can debbug ?
Any suggestions ?
Thanks in advance,
Best regards,
Rodolphe.

Debug ABAP Routine in InfoPackage:
Put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
And when run infopackage, go to sm50.
On that process, menu program->debug program.
In debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps...

How debug a routine create in InfoPackage for Data selection ?

Hi everybody,
I decide to debug a routine create in InfoPackage.
Here, the name of my ABAP routine:
program conversion_routine
form compute_TREATMENT_DATE
When i execute the "/h" command to launch debugger, i don't see this routine in Call Stack...
How i can debbug ?
Any suggestions ?
Thanks in advance,
Best regards,
Rodolphe.

Debug ABAP Routine in InfoPackage:
Put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
And when run infopackage, go to sm50.
On that process, menu program->debug program.
In debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps...

How to debug routine in process type "Deletion of overlapping requests"

Hi all,
I created a process chain including a process of the type "Deletion of overlaopping requests from InfoCube".
In this process I created a routine to decide which requests to delete. Now I would like to debug this routine, but do not know how.
Merely setting a breakpoint does not seem to help.
Does anyone have a hint how to debug this routine?
Many thanks,
Stefan

Hi,
put a "BREAK-POINT." statement into your code (don't forget to remove it afterwards). Then you activate your process chain and go the menu Execution at the top of RSPC. There you choose "Execute synchronous to Debugging". The process chain should then kick off and stop at the point where you put the break point.
Hope it helps.
Stefan

How to analyze routine in SD (VOFM)

Similar Messages

Maybe you are looking for