How to archieve configuration in ciscoworks for 4404 wireless controller

Hi All,
How can we archieve configuration in ciscoworks for 4404 wireless controller.
Thanks in advance.
Samir

The WCS controllers are supported just like any other device.  Make sure you have either telnet or SSH enabled for config archive transport, then before a Sync Archive on your controllers.  RME will log into them, and run "show running-config" to extract the configuration.

Similar Messages

  • How will i configure partner determination for customer master

    how will i configure partner determination for customer master data.

    hi
    Check this
    BUSINESS PARTNERS AND PARTNER DETERMINATION
    In the partner determination procedure you can determine whether partner functions can or should occur in a partner object (Customer Master, Sales Document, Item Category etc.) For each object, in which partner function can be created, you can define partner procedures. This also means that
    For Customer Master
    For Sales Documents
    For Sales Documents and Billing Documents: for items
    We can define our partner determination procedure for each of these levels as shown below. In Blue are given the ones wherein the Partner Procedures are assigned to the Partner Objects
    Customer Master Account Group
    Sales Document Header Sales Document Type
    Sales document Item Item Category in sales
    Delivery Delivery Type
    Billing Header Billing Type
    Billing Item Billing Type
    Sales Activity Sales Activity type
    By assigning a procedure you determine for which account groups (for the customer master), which sales document types (for sales documents) and for which item categories this procedure would be valid.
    In the partner determination procedure you can determine for each partner function
    whether the partner function is an obligatory partner function
    whether the partner function can be changed in the document
    BUSINESS PARTNER FUNCTION
    By assigning a business partner function to a partner you can determine which functions the partner fulfils in the business process. Partner Functions are classified using partner type. The partner type represents the roles played by the business partner within the business transaction.
    Following partner functions exist in the standard process of Sales and Distribution
    Partner Type Customer
    Sold-to Party, Ship-to Party, Bill-to Party, Payer and Sold-to Party authorized to release against a contract. You can define the sold-to party authorized to release against a contract in the partner screen of a contract. This partner may only schedule orders with reference to this contract, even when he is not the sold-to party authorized against a contract.
    Partner Type Contact Person
    Contact persons are natural persons whom you must contact at the customers for business processing (e.g. purchasers) Contact person can be created directly in customer master record.
    Partner Type Vendor
    A forwarding agent is an example of a business partner on the credit side, who is included in a sales process. If you commission a particular forwarding agent for deliveries to a specific customer, you can define the forwarding agent in the customer master record as the partner.
    The other possible partner functions on the credit side in the sale process are interpreters, auditors etc. The forwarding agent is an agent who performs transportation services. This includes organizing the shipment, delivery and receipt of the goods, arranging the carrier services and handling the customs issues.
    Partner Type Personnel
    Employee Responsible
    Sales Personnel
    You can enter an employee from your firm as the person responsible:
    In the Customer Master – If the employee is normally responsible for processing transactions with this customer.
    In the Sales Document – If the employee is responsible for processing the Business Transaction.
    STEP WISE PROCESS FOR PARTNER DETERMINATION PROCEDURE
    Sales and Distribution->Basic Functions->Partner Determination->set Up Partner Determination->Set up Partner Determination for Customer Master.
    First go to OVT0 – create customer account groups. Here you make new entries, click whether it is a one time customer, description. Also you can do the field selection here for general data, co. code data and sales area data.
    Now go to IMG – logistics general – business partner – customers – control – define & assign customer number ranges define the number. Here you range that you want and assign it to your customer account group.
    Now go to VOPA – here the selection will be on customer master, click on partner procedures, create the partner determination procedure. The following steps need to be done in partner determination area
    Assign partner function to account group i.e SP,SH, BP, PY to account group (debit side ). Sales and Distribution->Basic Functions->Partner Determination->Assign Partner Functions on the debit side to account Groups.
    Then create Partner Determination Procedure.
    Assign the Partner Determination Procedure to Partner Function.
    Then finally assign the Partner Determination Procedure to acc group.
    Important Points in Business Partners and Partner Determination Procedure
    Partner relationship maintained/defined in the customer master is proposed automatically in the document header when you create a sales document.
    In customizing we can decide whether several partners can be assigned to one partner function in the customer master.
    In sales documents, the system is configured so that only one partner can be assigned to each partner function.
    We can define partners at item level in the sales documents.
    Business Partners that are defined at the header level however cannot be changed at the item level.
    You can prohibit anyone from changing a partner that has already been entered in a sales document.
    It is also possible to manually change or enter the address of a partner, such as the Ship-to Party. This change does not affect the master record.

  • How do I enable the security for my wireless connection?

    How do I enable the security for my wireless connection?

    Enter the setup page (192.168.1.1),  hit the Wireless Tab, then the Security tab.

  • Anybody know a reseller that would download/sell a firmeware for 2504 wireless controller or what service to buy to be able to get it?

    anybody know a reseller that would download/sell a firmeware for 2504 wireless controller or what service to buy to be able to get it?

    Be aware that you do not need to purchase SmartNET for your APs.
    Thanks for the ratings, Marek.
    Be aware that nearly all 802.11n APs (some exclusion to AP1250) are covered under the new Cisco Limited Lifetime Warranty.  Read through the link provided.  This is why I posted that you do not need maintenance contract for the APs.  The main thing to understand is that if you need to RMA your AP, it'll take 10-business days for the replacement part to be sent.
    I have spoken to some Cisco Authorized Reseller and some Cisco TAC engineers who insist that the Cisco LLW don't exist or doesn't apply to BLAH model.  Don't be fooled.

  • How we archieve configuration for Cisco ASA 5500 series appliances

    Hi,
    We need to archieve configuration for Cisco ASA 5500 series appliances.
    We have Cisco works LMS 3.0.1.
    Device package installed is 4.2
    Any help would be appricated.
    Thanks in advance.
    Samir

    Hi ,
    Thanks for your answer.
    Right now we are using TACAS to login in to the ASA. That means we need single username and password to login via
    Cisoworks. Am I correct ?
    Waiting for your reply.
    thanks,
    Samir

  • How do you configure two counters for a single task?

    Hello Everyone,
    I would like to know how to configure two counters for a single task. At first, I have put two start task for two counters and it did not work. Now, I have put Control Task to control the task of the other counter. Appreantly, all what it does is that it makes one counter work while other is stopped or not working. I have attached a picture of the VI below.
    Thanks.
    Mechanical Engineer

    Hello Mike,
    We are currently using NI-cDAQ 9191 chassis with NI 9401 Digital I/O module that can use counters. I don't know if the lines for the counters are multiplexed or not. I have attached the VI for you to look at it.
    Thank you for your effort.
    Mechanical Engineer
    Attachments:
    VI_Degrees(test2).vi ‏187 KB

  • How to setup a static IP for a wireless printer

    This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it.  For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better.  At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected".  The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
    The only way to fix this is reboot, and then the printer shows up again in Preferences.  I select it and all is well again...until a few days pass and the same thing happens again.  Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use.  I also have an Epson Artisan 725 and the same thing happens with it about once a week.  Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
    I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer.  Any help would be greatly appreciated.

    You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
    If you have AirPOrt Extreme, you could do this:
    In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
    Start up the AiPort Admin Utility
    Go to Network tab
    click + in the DHCP reservations
    Choose an IP you want for your ATV & Enter the MAC address
    From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
    It is not a static IP in a true sense, but behaves just like one.
    Works great for me...
    If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

  • How to create/configure an OVS for a custom BO?

    I have created a new BO with three elements (ID, Name, FilterCriteria).
    For this BO I created a Query (QueryByElements):
    - Selection: ID, Name, FilterCriteria
    - Basic Find: ID, Name
    - Result: ID, Name, Filtercriteria
    After this I created an OVS for this BO.
    In DataModel Tab I bound the Items Node of the OVS to the Query Node of the BO, OVS:ObjectID -> Query:ID, OVS:ObjectName -> Query:Name and OVS:FilterCriteria -> Query:FilterCriteria.
    Next i created a structure in the OVS with the data fields: ID, Name, FilterCriteria and SerchText.
    In the Controller Tab I bound the ValueHelpQuery of the OVS to the (new) Query of the BO with this parameters:
    - ID : /Root/Structure/ID
    - Name : /Root/Structure/Name
    - SearchText : /Root/Structure/SearchText
    - FilterCriteria : /Root/Structure/FilterCriteria
    Inport:
    - ID : /Root/Structure/ID
    - Name : /Root/Structure/Name
    - SearchText : /Root/Structure/SearchText
    - FilterCriteria : /Root/Structure/FilterCriteria
    - + standard parameters like ParentComponent...
    Outport:
    - ObjectId : /Root/Items/ObjectId
    - ObjectName : /Root/Items/ObjectName
    With this configuration I get a correct value suggestion when I am typing in the field, and when i select a value from the drop down list the value is transferred to the field.
    But, if I open the screen:
    - the search is not working, I always see all values.
    - if I select a row, the value is not transferred to the field. the field is empty.
    I tried it without the FilterCriteria in the parameters and inport, but id shown the same behavior...
    Do you have any idea to solve this problem?
    Thanks,
    Eduard

    suddenly the transfer of the selected value from OVS UI to the fiels is working... I didn't change anything.
    But the search in the OVS UI is still not working. Has someone any ideas how to fix it?

  • How do I configure Server DHCP for a shared-over-WiFi network connection?

    Hey all,
    Here's how my network is set up-
    Comcast > Modem > DD-Wrt router >(Ethernet)> Mac Mini >(WiFi)> Macbook Pro, other devices.
    I set the router to use the Mac Mini (with OS X Server) as the DHCP server, and I have the Mac Mini sharing the ethernet connection over WiFi.
    The issue is that while my Macbook Pro can get an IP from the Mac Mini (as per DHCP settings), there's no internet connection.  I'm not sure I even have the router IP set correctly, should it be the Mac Mini's IP or the router's IP?

    I would normally use the router as the DHCP server but it should be possible to use your Mac mini as the DHCP server instead.
    With regards to the WiFi, you would want to configure it in bridging mode, this will let WiFi clients and Ethernet clients be on the same subnet and the WiFi clients will then be able to request DHCP addresses from your server on Ethernet. This is the way I have my home network setup.
    In the DHCP settings on your Mac mini server, you need to define the default gateway/router as being the IP address of your router. You also need to define valid DNS server addresses. If you running your own internal DNS server perhaps for Open Directory then this would be your internal DNS server address. The range of IP addresses you are issuing need to match the range being used internally by your router as does the subnet mask.

  • How do I configure my hardware for timing operations​?

    I'm using a 6020E with an SCB-68 and I would like to know how and where to plug into the SCB in order to drive a valve with a signal generated by the Generate Pulse-Train VI. I am pretty much lost when the manual talks about TRIG's, CONVERT*'s, gates, etc... so it is not of any use to me. Can I get some help? I just need to know how to configure the counter, and what port I should plug into to have the correct device receive the generated pulses. Thanks!

    Greetings,
    When using an example, such as the Generate Pulse Train (DAQ-STC).vi, the best place to go for running instructions and signal connections is the Documentation found by going to File -> VI Properties and pulling down the menu to Documentation.
    You will most likely be using the board's internal timebase and, as such, do not need to connect anything to the counter's SOURCE pin. You will find that you can optionally gate the pulse generation. If you just want to simply generate a continuous pulse train and not stop or pause it until the user clicks the Stop button, then all you need to do is open this VI, enter the device number for your DAQ card, specify the counter you will be using (0 or 1), and enter your desired frequency and duty cycle.
    The pulse will be generated on the specified counter's OUT pin. A connection from the OUT pin to your external hardware is the only physical connection you should have to make.
    To find out the pin number for the OUT pin you will have to look up the cable-pinout for your specific DAQ card. This pinout is in the User's Manual. I believe you misquoted your hardware since we don't make a PCI-6020E. Therefore, I cannot double-check the pins for you.
    Regards,
    Justin Britten
    Applications Engineer
    National Instruments

  • How do I configure a proxy for all users via GPO on Server 2012 R2?

    I would like to configure a proxy that applies to all users that log into our server running Server 2012 R2. I can manually set up the proxy (on an individual account basis) via Internet Options in Control Panel but this proxy needs to be configured for
    all users. Is it possible to do this in Group Policy Management for Server 2012 R2?
    Thank you
    Silas Horton

    > Have you checked *User configuration\Policies\Windows Settings\Internet
    > Explorer Maintenance\Connection\Proxy Settings *in group policy?
    He cannot check this because it is't available anymore starting with
    Server 2012/Windows 8/IE 10...
    > Hope it helps.
    No, it doesn't :)
    Better check User configuration - Preferences - Control Panel Settings -
    Internet Settings
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • How to bes configure apple TV for me

    I am moving to europe and have alot of videos on dvds and music cds that I want to bring over. Insted of packing the discs, I thought it might be a good idea to put them on my pc, convert them, and then watch/listen to them on my apple tv. I would like to put these files on an external hdd that is networked using airport extreme, the newest one with the usb in the back of it. Then I figure,there must be some way to be able to watch/listen to the content on that drive over the wireless network throughout the house and on apple TV? The computers I have for this network are all BRAND NEW apples. One Macbook, and one imac, both have bluetooth and 802.11n. So, if this could work, let me know, if not, tell me how to do it by connecting it (hdd) to a computer please. I have only bought the macs but will buy whatever you guys reccomend for the best setup for apple tv so tell me everything I need to do it right. Also, I dont know how much bandwidth you need to sync or stream with apple tv but here is what I am dealing with, a three story 6,000 sq. ft. home. Will one airport extreme do the job at 802.11n or do I need more? If I do how would I set them up? Also, isnt there something that can expand the range of your airport that apple makes that is sort of like a smaller airport that plugs into the wall? If so how would I set this up? Thank you very very much, and by the way, if it isn't clear, I have a high speed connection if you needed to know that.
    Message was edited by: RM26
    Message was edited by: RM26

    Provided your movie files are in an Apple compatible format it is certainly possible to stream them from an external drive but you must have an Apple/PC switched on with iTunes running as it's iTunes that streams the files to AppleTV, rather than AppleTV knowing where the iTunes files are and fetching them itself.
    Streaming from an external drive is more likely to work if it is directly connected to the Mac running iTunes, as the datapath is shorter for streaming:
    Ext HD>Mac (iTunes)>router>Apple TV
    as opposed to,
    Ext HD>router>Mac (iTunes)>router>Apple TV
    Each step in the chain can potentially add some delay so the fewer steps the more likely streaming is to be successful.
    As far as the question about an extreme being successful for wi-fi in the house, there are too many variables to give a definite yes or no with any house. It all depends on distance of devices from each other, lack of neighbouring/local interference and the materials used for construction in the house will determine the strength of through transmission of wireless signals together with vicinity of local objects such as fridges/microwave.
    It may well work, but I don't think anyone could guarantee it until you try.
    In terms of not transporting your original discs be aware that video conversion takes quite some time to accomplish so it might be better to transfer the original files and convert at a future date if your time span is short. Alternatively consider getting a big lightweight nylon CD/DVD holder and just bring the original discs without the cases/packaging.
    You could use something like an Airport express to expand the network range but it adds another link to the chain so to speak and I'd try and manage without first if at all possible.
    Even if a network was a bit too slow to stream movies it should suffice for music and you could always slowly sync movies to the AppleTV in advance of watching them if your content outstrips AppleTV capacity.
    AC

  • Packing how do u configure in sap for any material

    Pls let me know
    1.The process of packing for any material in sap
    2.If a project is going live on 1/06/07 and if delivery , billing takes place in the legacy system on 30 and 31/05/07 how do u activiate it in the prod system
    3.what is the exact role of migo and miro process in third party sales

    Process of packing
    Path: IMGLogestics executionshipping--packing
    1)  Define Number ranges for Handling Units
         Here we define the number ranges for packing the units.
    2) Packing control by item categories:
        Here we define if the items categories that we use can be packed or not.
    3) Define requirements for Packing in the delivery
        Here the requirement for packing is set. We are using std requirement. We can create our own requirement for example saying that the packing is not possible if credit block exists.
    4) Define packing materials
    Here we define the packing materials that we use. the material master for  materials must be created and the material type is VERP. In the sales: general/ plant view in packing material data the corresponding packing material has to be enterd in the packing material type field. Ex: you create packing material Z003 and call it wooden box, then you must enter Z003 in the material masters sales: general plant view in the packing material type field.
    5) Define material group for packing material
    This group has to be mentioned in the material master of all the materials that have to be packed. Ex You define a material group grp1, then you must mention this in the material master sales: general plant view in the packing mat grp pack matls field.
    6) Define Allowed Packaging Materials
    Here we define all the materials that are allowed for packing along with the respective mat group. Ex: You have created three packing materials (step 4)
    a) z001: Plastic trays
    b) z002: corrugated box
    c) z003: wooden box
    you have also created a packing material group grp1 (step 5)
    Now you must assign z001, z002, and z003 to the packing group grp1

  • How to install & Configure Work Flow for OWB

    Hi All,
    I have installed companion products and now to configure work flow, what schema name should I have to give.
    Can anybody tell me please.
    Thanks,
    Siva

    Hi Siva,
    If you are going to use workflow only for OWB , then what ever you have done is enough .
    Using the Companion CD launch the UI and from the installation options Choose the following option "Oracle Database 10g Companion Product” Installation Type (Install into new Home)
    This option will install the HTTP-Server
    This option will create the default DAD for workflow
    1 In the Middle Tier Configuration screen enter the required parameters
    Workflow Schema: Schema Name
    DB Host: DB Hostname
    Port Number: DB Port on Host
    Oracle SID: Database SID
    2. Enter the Password for your oracle Workflow Database Account
    3. This installation should have created the default DAD "/pls/wf" for you. It is required to restart the HTTP Server using the commands
    $ORACLE_HOME/opmn/bin/opmnctl stopall
    $ORACLE_HOME/opmn/bin/opmnctl startall
    Where ORACLE_HOME is the HTTP Server home
    4. Now you can access the Workflow Home Page
    Thanks,
    Sutirtha

  • Where can I find details on how to globally configure FireFox 10 for networked users

    I am trying to set configuration options in Windows7-32 and Firefox-10. I am having some troubles, and cannot seem to locate configuration details for the latest version of Firefox. Particularly in regards to where the configuration files are stored, and the options for modifying behavior for AllUsers.

    salwolfe wrote:
    Until recently, I was able to watch both SnagFilms and Hulu within the Safari Browser successfully.  In both movie sites, I no longer get video and am asked to download Adobe Flash Player (which I already have 14.0.0.125) but my system indicates that Plug-In PPADI has not been installed?...
    The problem is that your Flash Player is not current. Check this to see what the current version is (vs what you have) and here to get the latest version. There is supposed to be a major security issue in the version you've got so Apple is blocking its use. In any case, don't get Flash Player from anywhere except Adobe.

Maybe you are looking for